Used Edge Tot for sale (4,168)

Condition: used, Year of construction: 1978, sheet width . mm plate thickness . mm serial number 20719 Bwedpfxeucgvae Abbsh total power requirement . kW weight of the machine ca. 1,4 t

Year of construction: 2013, operating hours: 5,200 h, condition: excellent (used), functionality: fully functional, We offer this very good Comandulli SPEEDY SYSTEM D8 automatic stone edge polishing machine, year of construction 2013. Manufacturer: Comandulli Model: SPEEDY SYSTEM D8 Year of construction: 2013 Condition: very good Bedoycxyaepfx Abbswh If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1996, Direction of plate movement: from operator to the left Max. edge thickness: 8.0 mm Min. workpiece width: 70 mm Feed speed: 11 m/min Heating time: 4.5 min Automatic roll magazine: Yes Cutting shears up to: 0.2 - 3.0 mm Single-edge feed: Yes Automatic gluing: Glue pot with granulate, top-mounted Cut-off saw: fixed 90° Flush trimming unit: Yes Combination trimming unit: Yes Bwsdpfxexwdp Ue Abbeh Aggregate display: infeed display Control type: manual Operation: selector switch/push buttons Mobile version: No Protective hood: Yes Working height or feed table height: 870 mm Approx. weight: 670 kg Dimensions: 3600 x 1400 x 1200 mm Motor power: 11 kW Extraction diameter: 120 mm Storage location: Nattheim

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, OTT Tornado Top Edge Banding Machine in Excellent Condition PU glue pot with release agent, also suitable for EVA adhesives. We had the entire machine recalibrated in September 2024. The glue unit was replaced. The results are perfect with transparent adhesive and incredible with white panels using white adhesive. The machine runs perfectly and without any problems. Technical specifications: Edge thickness: 0.4 - 8 mm Panel thickness: 8 - 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm Cross-cutting unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Bwsdsv Sm Hcopfx Abbeh Corner rounding unit Scraper blade Buffing unit Triple spraying Total power: 17.5 kW Dimensions: Length: 6180 mm Width: 1770 mm mm Weight: 3100 kg - Available immediately -

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1000025340, travel distance X-axis: 6,735 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 245,290 mm, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Biesse BH 660, bSolid, bEdge, workpiece height (max.): 60 mm, Short Description • X axis working area: 6735 mm • Y axis working area: 1650 mm • Working Table: Pod and Rail Bodpfxoycvcxe Abbewh • Main Electrospindle Power: 13.2 kW • Number of Controlled Axes: 4 axes • Max Edge Height: 60 mm • Total Number of Drilling Spindles: 20 • Total Number of Tool Changer Positions: 16 Long Description • Subfamily: CNC Machining Centers for Routing, Drilling, and Edgebanding • Type of Work: Edgebanding, Drilling, Routing • Maximum Panel Passage: 60 mm • Number of Working Fields: 2 • Working Table: Pod and Rail • Number of Rails: 10 • Pod Position Indicators • Vacuum Cups for Securing Workpieces • Number of Vacuum Cups: 40 • Clamps for Securing Workpieces • Vacuum Pump • Number of Pumps: 1 • Single Pump Capacity: 250 m³/h • Boring Units: 1 (Top) • Vertical Boring Spindles: 20 • Horizontal Boring Spindles in X: 4 • Horizontal Boring Spindles in Y: 4 • Router Spindles: 1 (Top) • Number of Controlled Axes: 4 • Automatic Tool Changer • Motor Power: 13.2 kW • Edgebanding Operating Units: 1 • Gluing Unit: Mounted on Main Beam • Glue Pot for Hot-Melt Adhesive • Edge Coil Magazine • Number of Magazine Positions: 4 • Grooving Unit: 2 Top Units, Fixed for Grooving in X and Y • Tool Magazine: 1, with 16 Positions • Tools Positioned on the Machining Head • Combination Head for Edge Scraping and Glue Scraping • Air Jet Panel Edge Cleaning Unit • Control System: PC Control • Machine Programming Software: Bsolid • Protective Structure for Operating Units with Safety Sensors • Waste Chip Conveyor

Condition: new, functionality: fully functional, saw band length: 2,280 mm, saw band width: 150 mm, Description: - Small, flexible all-rounder - Small table on the deflection roller for sanding radii and shapes - Motorized belt oscillation - Height-adjustable work table - Incl. 10 sanding belts 150 x 2280 mm K120 Bjdpfx Aou Ac Tqjbbjwh Technical data: Motor power: 2.2 kW 90-180 ° tiltable Belt speed: 22 m/s Table size: 750 x 350 mm Sanding belt dimensions: 150 x 2280 mm Weight: from 180 kg

Condition: used, Year of construction: 2004, machine/vehicle number: 59274, type of input current: AC, input voltage: 230 V, disc diameter: 150 mm, FRANK Surface Grinder GECKO S Technical data: • Motor voltage: 230 V • Motor power: 1,500 W • Grinding disc diameter: 150 mm • Weight approx. 6 kg Bodpoycuy Nsfx Abbswh The machine has been overhauled in our workshop and is fully operational. The machine is supplied including power cable and dust bag. Shipping available at extra cost. We ship exclusively within the EU. No shipping outside the EU.

Condition: used, Compact edgebanding machine Hebrock EURO 3001 for precise edging of panel material with edge bands. The machine enables clean edge processing through automatic glue application, pressing rollers and post-processing aggregates. Ideal for furniture and interior construction. Technical data subject to change. Unit 1: Glue application Unit 2: caps Unit 3: Flush milling workpiece height: approx. 10 – 40 mm edge thickness: max. approx. 12 mm feed rate: approx. 10 m/min Bjdpsxdc D Refx Abbswh

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Equipment and Technical Data: - Base machine: Streamer 1057XL 200-400 V / 50 Hz, with manual pressure bridge adjustment - Extendable XL workpiece support: spacing 600 mm - Jointing milling unit: FG201 with 2 cutterheads for trimming panel edges - Diamond cutters: Diameter 70 x 64 x 30 mm, Z2 + 2, left-hand rotation, Air Stream System - Diamond cutters: Diameter 70 x 64 x 30 mm, Z2 + 2, right-hand rotation, Air Stream System - Edge feeding unit: 1903, automatic transport for roll and strip material - Glue application system: Glu Jet GJ301 2.3 kW / 50 Hz, automatic glue height adjustment (contact nozzle) - Automatic reloading function - Pressure unit: 1912-3, pneumatic, first roller driven, with pneumatic plunge control - End trimming unit: 1918, 60 mm, pneumatic, angular trimming 0-10 degrees, pneumatic adjustment - Extraction hoods: for end trimming unit 1918 - Multifunctional milling unit: FR 201, for flush, radius, and profile milling, including DIA cutters - Corner copying unit: 1832, 1 x 0.35 kW / 200 Hz / 12,000 rpm, corner copying for edge thickness up to 3 mm - Diamond cutter: Diameter 53 x 10 x 16 mm, Z = 3, R = 2 mm, CM technology (Leuco system), integrated chip extraction, for profile milling unit 1832 - Scraper unit: 1929 - Complete chip box: Diameter 120 mm, for 1929 + 1964 + FK70 - HW reversible knives: for scraper holder R = 2.0 mm, 2 pcs required - Surface scraper: FK 701 for removing excess glue for a clean glue joint - Spray device: TR 201 for infeed and outfeed areas - Buffing unit: 1940, 2 x 0.09 kW / 50-60 Hz / 1,400 rpm, for finishing and polishing edges, with 2 textile discs, tiltable 0-5 degrees - Minimum workpiece length: 160 mm - Workpiece thickness: 6-45 / 60 mm Bwodpfxox Twh Ee Abboh - Edge thickness: 0.4-3 / 6 mm - Feed speed: 10 m/min Length: 4,630 mm Weight: approx. 1,440 kg Availability: short notice Location: 65439 Flörsheim

Condition: refurbished (used), functionality: fully functional, Automatic profile edge sander DE STEFANI 1 sanding unit with adjustable sanding belt (interchangeable profiled or straight pads) unit tiltable 0° to 90° timed approach and retraction of the sanding pad variable feed speed via feed belt variator sanding belt oscillation pneumatic blow-off of sanding belt Bwjdpovxt Hiofx Abboh robust rubber link feed belt telescopic pull-out support for large workpieces

Condition: excellent (used), CATALOG NUMBER 7730 TECHNICAL DATA Milling Machine: - Minimum width of workpieces: 50mm - Workpiece thickness: 16-40mm - Edge thickness: 0.5-3mm - Motor power: 1.1kW - Air requirement: 6 bar - Extraction nozzle: 60mm - Dimensions (L/W/H): 1900x850x1450mm - Weight: 290kg Trimming Unit: - Blade diameter: 150mm - Table size: 750x820mm - Motor power: 0.12kW / 2800rpm ADVANTAGES – Polish-made – Trimming unit Bodpfexa Egmsx Abbjwh – Profiled cutters included – Unpainted – DTR documentation – Used milling machine, in very good condition Net price: 4500 PLN Net price: 1070 EUR depending on a rate of 4.2 EUR (Prices may vary with significant rate fluctuations)

Condition: used, Year of construction: 2018, total length: 5,370 mm, total height: 1,600 mm, total width: 1,020 mm, - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 18421 - Transport dimensions: 5370mm x 1020mm x 1600mm (l x w x h) Bsdpfx Aboxyy Ryjbewh - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Edge banding machine with HolzHer 3 roller feed Bwjdpsvkgdrofx Abbeh

Condition: excellent (used), CNC Machining Centre for Routing, Drilling, and Edgebanding of Straight and Curved Panels 4-Axis Electrospindle – HSK F63 Automatic Tool Changer with 12 Positions Boring Unit Bjdpfslpf E Uex Abbowh Edgebanding Unit Edge Storage with 3 Positions Vacuum Pump

Condition: excellent (used), functionality: fully functional, Equipment: double-sided, Additional equipment: Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW PUR OTT 2kg Melting Station / Bwsdpoxwui Ejfx Abboh Machine Benefits Technical Machine Benefits Workpiece thickness: 12 - 40 mm / minimum workpiece size (lxw): 250 x 240 mm / maximum workpiece size (lxw): 2500 x 1200 mm / maximum workpiece weight: 50 kg Roller material edge thickness: 0. 4 - 3 mm / maximum edge cross section (plastic): 135 mm² / maximum edge cross section (veneer): 100 mm² / maximum roller diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edge up to 0. 6 mm /up to 30 m/min for thick edge up to 3 mm Cross processing speed: up to 30 m/min for panel sizing/ up to 20 m/min for edge processing Minimum workpiece gap: 500 mm

Condition: excellent (used), Catalogue number 7843 TECHNICAL DATA - Table dimensions: 2050x350mm - Table dimensions with support: 2050x940mm - Min. workpiece length: 120mm - Min. workpiece width: 90mm - Workpiece thickness range: 10-45mm - Edge width range: 12-48mm - Edge thickness range: 0.4-3mm - Feed speed: 6.4m/min - Power consumption: 2.3kW - Required air pressure: 0.7 Mpa - Spindle speed: 10,000 rpm - Extraction connector: 2x100mm - Heating power: 1250W - Dimensions (L/W/H): 2400x1300x1130mm Bwjdpfox A Dt Dsx Abbjh - Weight: 360kg ADVANTAGES – Unpainted – With polisher – Used machine, in very good condition Net price: 12,000 PLN Net price: 2,860 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER: 7404 TECHNICAL DATA - Minimum workpiece thickness: 16mm - Maximum workpiece thickness: 60mm - Height to table surface: 920mm - Motor power: 1.2kW Bsdpfxjx Tgv So Abbowh - Voltage: 400V - Disc – guillotine – feed rollers for tape – glue tank – 3 guide rollers (first one is the drive roller) - Worktable: 1600x670mm - Dimensions (L/W/H): 1600x1400x1100mm - Weight: 170kg ADVANTAGES – Polish manufacture – Suitable for edging both straight and curved edges – Used machine, in very good condition Net price: 5,900 PLN Net price: 1,400 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may change with significant fluctuations)

Condition: good (used), Year of construction: 2016, operating hours: 16,977 h, functionality: fully functional, feed length X-axis: 140 mm, feed length Y-axis: 50 mm, feed rate X-axis: 18 m/min, edge thickness (max.): 3 mm, total length: 6,000 mm, workpiece height (max.): 60 mm, overall weight: 3,000 kg, SCM OLIMPIC K 800 - T-ERL EDGEBANDER EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Specifications: -- Edge Capacity, 0.4 to 8 mm (0.016 to 5/16") for strip feeding. -- Panel Capacity, min. width 50 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-3/8"). Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator and pneumatic panel spacing device. -- Pre-Milling Station, RT-E: Spindles 2 x 3.0 HP, 12,000 RPM, (1) with PLC controlled jump action and manual digital indicators positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Servo motor positioning, (4) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station K-SEL: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0 - 15, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Flush Trimming Unit: Top/Bottom, 2 x 1.0 HP, 12,000 RPM with 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning. -- Bevel/Radius Trimming Unit: Programmable, servo motor positioning, 2 x 1.0 HP - 12.000 RPM motors for change-over on the fly. -- Corner Rounding / Trimming Unit: For additional top & bottom trimming of linear an/or vertical leading & trailing corner when edgebanding all (4) sides, 2 x 0.8 HP - 12,000 RPM motor. -- Profile Scraping Unit "RAS/1000": Top/Bottom with (2) indexed manual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue Scraping Unit, "RC-V": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean. -- Buffing Unit "SPN": Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12. -- Hot Air Unit: Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thick pvc edging materials that my be lost during the edge scraping process.Operator Interface: -- Startouch Controller, 12" color touch screen, swivels 270 at in-feed of machine. Capable to store (100) programs, (6) at the touch of a single key. Graphical display of all working units. Tracks production data, diagnostic information and monitors maintenance schedules. Complete With & Features: -- Feed-speed, 36/52 FPM, 1 x 2.5 HP feed drive motor, 200 Hz frequency inverter for all trimming units. -- Electronic, programmable hold-down pressure beam positioning, lighted safety/sound enclosure cover and outboard panel support. -- Actual Model: OLIMPIC K 800 T-FR2 2 glue tanks + 1 glue tank for spare parts Bodpoxxy Rksfx Abbewh

Condition: like new (used), functionality: fully functional, machine/vehicle number: NM0KCXTP6KPM92274, mileage: 1,971 km, power: 367.75 kW (500.00 HP), first registration: 12/2024, fuel type: diesel, tire size: 385/65 R 22.5 - 315/80 R 22.5, axle configuration: 4x2, wheelbase: 3,600 mm, brakes: engine braking, color: orange, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, airbag, cruise control, navigation system, onboard computer, parking heater, soot filter, spoiler, traction control, NM0KCXTP6KPM92274 ▪ Warranty until 19/12/2027 STANDARD EQUIPMENT: Air-sprung cabin ▪ Automatic climate control ▪ Bed zone remote control ▪ black grille ▪ body-coloured exterior mirror cap ▪ Front bumper in body colour ▪ bonnet in body colour ▪ cruise control & speed limiter ▪ driver's seat - heated & air suspension ▪ Dry air cabin heating ▪ EBS (electronic braking system) ▪ Electrically heated and electrically adjustable mirrors ▪ Electrically operated sliding roof ▪ front & rear protection against underruns ▪ long front bumper ▪ switchable air compressor ▪ maintenance-free front wheel bearing ▪ wheel chock ▪ DAB radio ▪ Advanced driver assistance systems (cybersecurity enhancements, rear view camera, drive-away information system, blind spot information system, tire pressure monitoring system, emergency stop signal, alcohol lock facilitation, traffic sign recognition, driver warning system, lane keeping alert, pre-collision assist) ▪ 2.64 FDR OPTIONAL EQUIPMENT: Luxury Pack for balloon tires ▪ 4 bellows (C4AS) air suspension rear ▪ PTO NH4C ▪ Fifth wheel 1200m ▪ Side skirts ▪ Air horn ▪ 19T MTM ▪ 385/65 Pirelli front tires ▪ 315/80 rear ▪ Aluminum wheels Bwedpfswifr Rsx Abbjh Discover our dealers via the website fordtrucksbelux.be Interested? Feel free to contact us: - Herman Noyens Trucks NV

Condition: good (used), For sale, Edge chamfering machine. Bwedpov T Ttfjfx Abboh - Assfalg ASO 750. - 1.1kw engine. - We will help you organize a profitable shipping company or courier.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total length: 3,350 mm, workpiece height (max.): 45 mm, total width: 1,510 mm, edge thickness (max.): 45 mm, total height: 1,640 mm, overall weight: 770 kg, extraction nozzle diameter: 60 mm, We offer for sale a professional edge banding machine with pre-milling unit of the company FELDER model G480. Below you will find some useful information about the machine: * Year of production - 2017 * Equipped with the Schugoma hot-air system for zero joints * Connected load - 7 kW * Edge thickness - 0.4-350 mm * Thickness of the sheets - 8-45 mm * Minimum width/length of the sheet - 70/210 mm * feed speed - 9 m/min * has a pre-milling and corner rounding unit * Automatic feeding of edges from a roll * Impact shears for PVC and ABS edges up to a thickness of 3 mm. * Teflon glue tank with a capacity of 1.2 kg. * Saw blade cutting unit with 12,000 rpm. * Rotating control panel with LCD display. Bsdpstp T Dtofx Abbowh * Suction nozzle - 7 x 60 mm * Weight approx. 770 kg * Overall dimensions 335 x 151 x 164 cm (Wx Lx H) * Perfect technical and visual condition

Condition: good (used), Year of construction: 2012, Working height: 840 mm Height of rear wall: approx. 3750 mm Depth of the system with water basin: approx. 1300 mm Width of the system with inlet and outlet: 11350 mm Bwjdpoyap Ngjfx Abboh Weight: 4060 kg

Condition: good (used), Year of construction: 1999, functionality: fully functional, Volpato LVO 120 edge grinder SN 1929112 Year of manufacture 1999 Manufacturer: LASM Volpato Italy Small single-sided grinding center VOLPATO offers the LVO 120 grinding machine, with combined function that can make life easier for many professionals in the industry. Bwodpevwdqcjfx Abbeh It was developed under the direction of experienced company staff, who work with passion to achieve the best possible result. Vertical oscillating grinder 2.2 kW motor (3 HP) Swivel table 0-90 degrees Work table dim. 880 x 370 mm. Mechanically swiveling Additional support and "round" grinding wheels Belt dimensions 150 x 2580 mm. Suction device Weight 250 kg Overall dimensions: 700 x 1000 x 1150 mm. CE marking Technical data may change

Year of construction: 1994, condition: used, Edger line / automatic edger / double edger with measurement and automatic saw blade adjustment EWD Esterer Type: DK90 TL 1000 Year of manufacture: 1994 Maximum pass-through width: 1000 mm Maximum cutting height: 120 mm 3 blades in total 2 blades adjustable Measurement system: Combimes with S-conveyor with crosscut saw with Esterer ARS TR infeed with 2-lamella chip separator Can be fully refurbished upon customer request. Bsdpfx Aoyam Iaobbowh The plant has already been dismantled and is immediately available. Location: Austria, near Leoben

Condition: used, Year of construction: 1994, Edging machine / Double edger EWD Esterer Model: DK90 TL 1000 Year of manufacture: 1994 Maximum feed width: 1000 mm Maximum cutting height: 120 mm Total of 3 saw blades Bodoyam Exepfx Abbswh 2 saw blades adjustable Measurement system: Combimes With S-type conveyor With cross-cut saw With infeed unit Esterer ARS TR With 2-strip chip separator Machine can be fully overhauled upon customer request! Already dismantled and ready for loading at any time Location: Austria, near Leoben