Used Edge Press for sale (15,589)

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm Dkjdpju N A U Ijfx Al Asu total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. *

Condition: used, Year of construction: 1995, Technical details: punching pressure: 25 (250kN) t pass through width: 1800 (1660 nutzbar) mm daylight between the columns: max./min.: 155 / 25 mm stroke: Stanzhub: 130 mm total power requirement: 5,0 kW weight of the machine ca.: 2,0 t Dimensions (LxWxH): 2,3 x 1,0 x 2,2 m Hydraulic trolley beam punch hydrl. pressure 250 bar Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec. Operation via control panel and pressure switch/control lever Equipment: 2x feed rollersØ 120 x 1630mm pneumatic close/open Dksdpfju Szfuex Al Aju *

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm Dkodjw D Awmopfx Al Asu throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Year of construction: 1969, Technical details: pressure: 55 t throat: 250 mm no. of strokes: 120 Hub/min daylight dimension : table/slide up: 380 mm ram adjustment: 55 mm sheet thickness continuous stroke : 2,25 mm ram stroke range: 6 - 90 mm total power requirement: 8,8 kW Dkedexu Dwmepfx Al Asu weight of the machine approx.: 2,75 t dimensions L x W x H: 1,4 x 1,2 x 2,2 m

Condition: used, Year of construction: 2005, Technical details: Dsdpfx Aszgvhhol Aoku pressure: 58 t box depth: 1145 mm material: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen bottles Feed opening: L: 1145 x B: 600 mm voltage: 400V / 50 V / Hz total power requirement: 4,0 kW weight of the machine ca.: 2,6 t machine dimensions LxWxH: ca. 1,07 x 1,84 x 3,1 m Anwendung: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen platzsparende Recycling Lösung kompakte Bauart automatische Pressplattenrückführung, dadurch erhöhter Bedienkomfort Öffnung an der Vorderfront Tür horizontal verschiebbar ca. 600mm Presskammer/Ballengröße: LxBxH: 1000 x 600 x 600 mm (0,36 m³) Bindeeinheit Band- und/oder Drahtabbindung Bedienung über Schalttafel *

Condition: used, Year of construction: 2003, Technical details: Pressure: 60 t Dksdpfx Alozvnrde Aju stroke: 400 mm table surface area: 700 x 700 mm passage opening in table: Ø 100 mm distance between columns: 700 mm distance between columns: 700 x 1300 mm table height over floor: 850 mm dayligth: max. 1150 mm daylight dimension : table/slide up: 400 - 800 mm cylinder diameter: Ø 110 mm total power requirement: 4,8 kW machine weight approx.: 930 kg dimension machine approx.LxWxH: 1,2 x 0,7 x 3,0 m HYDRAULIC DOUBLE COLUMN PRESS Special construction welded from 25 mm sheet steel Operating mode: single stroke Punch holder: pin M 70 x 2.5mm and punch Ø 128 x 440mm Table protection housing Round punch Ø 130 x 120 mm Hydraulic unit *

Condition: used, Year of construction: 1985, Technical details: Dkedpfxou Icwgj Al Asu Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic *

Condition: used, Technical details: punching cross section in mm²: 45 kp/mm² table-size: 120x100 mm Dkedpfxsu Icw Hj Al Aju throat: 80 mm weight of the machine ca.: 15 kg space requirements of the machine approx.: 0,3x0,2x0,95 m Punching Press *

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) Dksdpfx Alou Icxqo Aju - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets *

Condition: excellent (used), CATALOGUE NUMBER 7926 TECHNICAL DATA - working length 6200mm - working width 150mm Dodjzmfvuopfx Al Aeku - working height 1350mm - 12 vertical hydraulic cylinders - dimensions (L/W/H) 6580/1270/2350mm - weight approximately 4000kg ADVANTAGES - very good condition - used press - unpainted - designed for professional use Net price: 69900 PLN Net price: 16256 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7992 TECHNICAL DATA - Loading areas: 2 - Manually adjustable side clamps: 2 x 6 pcs - Pneumatic vertical clamps: 2 x 6 pcs - Max. length of glued elements: 3600 mm - Max. height of glued elements: 1500 mm - Max. thickness of glued elements: 130 mm - Guides for gluing thin elements Dkodpfjzmgk Tjx Al Aou - Dimensions (L/W/H): 4300x1570x2110 mm - Weight: 1400 kg ADVANTAGES – Two work areas – Gluing length: 3600 mm – Pneumatic cylinders – Guides for gluing thin elements – Unpainted – Mobile – on wheels – Used press, very good condition Net price: 14900 PLN Net price: 3465 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SD1-200-0051, functionality: fully functional, operating hours: 4,800 h, power: 59 kW (80.22 HP), input voltage: 380 V, input current: 70 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 200 t, stroke length: 250 mm, operating speed: 50 mm/s, table width: 870 mm, table length: 1,300 mm, table height: 1,020 mm, throat depth: 435 mm, ram plate width: 670 mm, ram plate length: 1,000 mm, distance table to ram: 450 mm, clearance between the columns: 1,500 mm, oil tank capacity: 70 l, total length: 2,761 mm, total width: 2,224 mm, total height: 3,819 mm, overall weight: 24,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, SEYI SD1-200 Straight Side Servo Press, 200 Ton Capacity High-performance servo-driven stamping press designed for precision metal forming, blanking, punching, and progressive die applications. The machine features a rigid straight-side frame construction, programmable servo slide motion, tonnage monitoring, electronic overload protection, and a user-friendly touchscreen control system. Dkodoz Ipxaopfx Al Aeu The servo drive technology provides optimized ram movement, improved forming accuracy, reduced tooling wear, lower energy consumption, and increased production flexibility compared to conventional mechanical presses. The machine is suitable for automotive, appliance, electronics, and general sheet metal manufacturing. Technical specifications include: Press capacity: 200 ton Stroke length: 250 mm Slide area: 1,000 x 670 mm Bolster area: 1,300 x 870 mm Die height: 450 mm Main motor power: 59 kW Power supply: 380-440 V / 50-60 Hz / 3 Phase Machine weight: 24,000 kg Safety light curtain installed Documentation available CE marked The machine is in good working condition and available for inspection. Additional photographs, videos, and technical documentation can be provided upon request. Ideal for high-precision production environments requiring productivity, repeatability, and energy-efficient operation.

Condition: ready for operation (used), Year of construction: 2017, Brand: HSM Type: V-Press 1160 plus Dkjdez Imlqopfx Al Aju Year of manufacture: 2017 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press features simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: excellent (used), Technical data: Year of manufacture: 1994, retrofitted in 2026 Working length: 4100 mm Distance between uprights: 3650 mm Press force: 170 tons CNC control: OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back gauge Overhang: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: Djdpfjz Immzex Al Ajku 1 set of tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), functionality: fully functional, Throughfeed press Working length: 3500 mm Working width: 1400 mm 14 upper plungers 6 side plungers Water heating with heating elements in the shelf Dkjdpoz Im Hhefx Al Aou CE marking Year of manufacture: 1996

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 250 t, stroke length: 365 mm, table length: 4,100 mm, Equipment: CE marking, safety light barrier, 1 used Edwards Pearson PR 250 Ton x 4 Metre (often listed as the 250/4100 model) is a heavy-duty, multi-axis CNC hydraulic press brake for sale - highly regarded in the metal fabrication industry for its robust build and longevity. Dkodpfx Alsz Iqmre Aou Below is an overview of the technical specifications, variants, and common configurations for this machine based on historical industrial data and machinery listings: ⚙️ Core Technical Specifications • Bending Capacity: 250 Tonnes (Metric) • Max. Bend Length: 4100 mm (4.1 Metres) Year 2002 • Foundation: Free-standing design 🛠️ Common Variants & CNC Controls Configured as a 6 axis machine featuring a 4 axis back gauge (X, R, Z1, Z2,) paired with a Cybelec DNC 1200 control unit. • Features hydraulic crowning system to keep bends precise across the full 4-metre span.

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m Dkodpfx Alexna Uze Aeu

Condition: used, Technical details: Dkjdpfxovc Ax No Al Aju pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: used, Year of construction: 1994, Technical details: air pressure - required: 8 bar total power requirement: 14 kW machine weight ab.: 80-170/je Maschine kg MULTIFUNCTION PUNCH PRESS for alloy windows construction 3 pieces: - for Schüco alloy window frame, post and beam profiles S65 - for Schüco alloy wing profiles for alloy window system ROYAL S 55, S 65 and S 70 - for Schüco alloy door profiles Royal S65 door base profiles - foot operation - pneumatic air gun Dedpfx Asu Icyhel Aeku AND - drilling automat for window construction application: - drill automat for door hinge - drill taper: for 8 pcs, usable tools 6 pcs, countersink drills with dia. 11/15mm approx. 80mm long - clamping operation via foot control and drilling via manual - accessories: diverse installation parts i.D. *

Condition: used, Technical details: pressure: 80 t distance between columns: 880 mm dayligth: 200 mm Table dimensions: 880x300 mm height over floor: 1000 mm distance between columns: 800 mm total power requirement: ca. 12 kW machine weight ab.: 2855 kg space requirements of the machine approx.: T:1,4xB:1,65xH:1,9 m Embossing - Hot Embossing application area: - for example: for foils, plastics, paper, hardboard materials etc. - stamp plate size: 600x310mm equipment: - counter - hydr. tank Accessories: - Mounting plate (600x300x90mm) not heatable. Sale as is. Dksdpfx Aju Icwtol Aeu *

Condition: used, Technical details: pressure: 90 t throat: 320 mm no. of strokes: 90 Hub/min daylight dimension : table/slide up: ca. 380 mm ram adjustment: max. 65 mm ram surface area: 600x55 mm clamping plate on table: 800x640x80 mm passage: 260x160 mm adjustment of stroke: 60 fest/fixed mm total power requirement: 5,5 kW weight of the machine approx.: 4500 kg space requirement approx.:: L:1,8xB:0,82xH:2,42 m - single / continous stroke - manual not available - normal maintennance has been executed, overhauled 2010 Djdpfx Asu Nfg Hsl Asku - at the moment without electric cabinet, without control, without air pressure tank i.D. *

Condition: used, Year of construction: 1980, Technical details: pressure: ca. 100 t distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm dayligth: 450+100 mm Dedpfou Nfhdjx Al Asku min. ram stroke: 26 mm max. ram stroke: 152 mm ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm clamping table: 1020 x 710 mm total power requirement: 10 kW weight of the machine ca.: ca.7 t space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m WITHOUT drawing cushion Can be demonstrated in idle run. i.D. *

Condition: used, Year of construction: 1985, Technical details: pressure: 100 t no. of strokes: 35-100 Hub/min throat: 360 mm ram adjustment: 20-130 mm ram surface area: 750x550 mm clamping plate on table: 1000x640 mm adjustment of stroke: 90 mm passage between the columns longitudinal/sideways: 610x500 / 440x550 mm daylight dimension : table/slide low: 300 mm total power requirement: 17,5 kW weight of the machine ca.: ca,7,0 t dimension machine xH: 1,9x1,4x2,7 m - there are 5 T-slots lengthwise on the ram plate - centre hole = 50mm This press is currently for sale without controls. Optional on customer request completion possible. i.D. * Djdpfju Nfh Dsx Al Aoku

Condition: used, Year of construction: 1981, Technical details: pressure: 30 t distance between columns: BxT: 600/450 mm daylight dimension : table/slide up: 650 mm ram stroke: ca. 600 / highspeed strokes mm table surface area: LxB: 500 x 700 x Ø 60 mm surface area of ram: 650 x 800 mm hydraulic-pressure: 170 bar air pressure - required: 4 - 6 bar total power requirement: 11 kW weight of the machine ca.: ca. 2,0 t dimension machine xH: 1,26 x 1,75 x 3,4 m Djdpfju Nfmaex Al Aoku Four-column press, hydraulic Possible applications: can be used as a deburring press Further technical features: - Table aperture 200x250mm - Opening in ram Ø 160mm - Passage in the column width 600 and depth 450mm - Operation via control panel Equipment: - Protective grille - Base plates *

Condition: used, Technical details: pressure: 40 t throat: 365 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 0,45 m/sec Dkodpju Nfuqofx Al Asu ram speed - forward: 0,10 m/sec ram surface area: 450 x 360 x 74 mm table surface area: 630 x 500 x 73 mm passage opening in table: Ø 205 mm table height over floor: 720 mm total power requirement: 13,0 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,7 x 1,1 x 3,0 m Other technical features: -trailing time: 443ms -trailing distance: 9mm -Last machine inspection: May 2020 valid for 1 year *