Used Edge Glue Machine for sale (92,863)

Condition: excellent (used), Year of construction: 2012, operating hours: 730 h, Edge banding machine Hebrock AKV3005DK-F with pre-milling, corner copying, and two scraper blades. Very well-maintained machine from a small workshop, in excellent condition. Touchscreen interface with PLC control for simple operation of the machine; up to 12 user programs can be saved. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 8 - 53mm Feed rate approx. 10m/min Noise reduction hood Extendable workpiece support, special feature extendable up to 950mm Extraction connection 80 + 140mm Units: Quick-change glue pot with glue outlet; two glue pots included in delivery (one used for EVA glue, one for PU glue), the PU glue pot is practically as new, only purchased for a single job. Pressure beam manually adjustable with SIKO counter Infeed fence manually adjustable with SIKO counter Edge thickness manually adjustable with SIKO counter Pre-milling unit with Leitz Whispercut diamond cutters, still sharp Gluing station with automatic edge feeder for coil material up to 3mm Pressure zone with 4 rollers Prodpfx Astpn Etjgwec Cross-cut saw Integrated collection container for edge trimmings Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Corner rounder R2, pneumatically adjustable between thin and thick edge The profile milling unit can also be used for shelf program, that is, it only rounds the straight edge, not the corners Radius scraper blade R2, pneumatically retractable Glue joint scraper blade, pneumatically retractable Hood lock CE marking Operating manual A video of the machine in operation can be sent upon request. All reversible knives of the milling units and scraper blades have been renewed or rotated, saws sharpened. The machine is therefore ready for immediate use. Only the diamond pre-milling cutters (Whispercut) have not been replaced, but are still sharp. Paintwork touch-ups carried out. The Hebrock AKV series is the predecessor of the current K series. The machine has only about 730 operating hours (glue pot switched on), but the frequency converters were switched on for only about 455 operating hours. The machine is in very good condition, see original photos. Machine dimensions approx. 5000 x 1400 x 1550mm (LxWxH) Weight approx. 1550kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "further offers from this provider."

Condition: new, Year of construction: 2024, functionality: fully functional, feed rate X-axis: 9 m/min, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, warranty duration: 12 months, HOLZ-HER Edgebander ARTEA 1020 Stock machine – Subject to prior sale Year of manufacture: 2024 - Base machine 1020 - Edge Control BC15 with Vi.Se. (Visual Setting) - LED machine lighting - Jointing milling unit Prodoxpgv Uopfx Agwoc - GluJet for PUR / EVA including adhesive reservoir - Milling - Profile scraper - Surface scraper - Buffing unit

Condition: excellent (used), Year of construction: 2020, operating hours: 759 h, Edgebander Akron 1130 J Year of manufacture: 2020, recently serviced - 7.1 kW, 7 bar - Edge thickness: max. 5 mm - Panel thickness: max. 50 mm - Coil material thickness: max. 3 mm - Workpiece length: min. 150 mm; Workpiece width: min. 85 mm - Feed speed: max. 9 m/min Podewzycnjpfx Agworc - Glue system: Granulate, lower glue pot; BIESSE glue system SP 01, quick-change glue pot - Strip magazine, spray unit - With BIESSE jointing unit RT 01 - Preheating zone, end trimming unit: 1 motor, BIESSE end trimming unit IT 01 - Flush/radius/chamfer units: 1 BIESSE fine milling unit RF 01 - Corner rounding unit: 1 motor, BIESSE corner rounding unit AR 01 - Scraper unit: profile scraper, flat scraper - Buffing unit - Nesting package: flush/radius/chamfer units, profile scraper - Execution: left-handed machine - Machine length: 4,215 mm; Weight: 1,000 kg - Total operating hours: 759.48 h; Total processed length: 46,284 m MACHINE AVAILABLE APPROX. FROM WEEK 42/2025!!

Condition: used,

Condition: used, Lange B90 KFE Edge thickness: 0.4 - 3 / 5 mm Control panel: PLC touch panel Pre-milling unit for workpiece edge preparation before the gluing section Automatic edge magazine for roll materials Teflon-coated quick-change glue pot for hot-melt adhesive granulate Workpiece height: 8 - 50 mm Predpfx Agoxl Aw Towsc Fine-adjustable glue roller Guillotine shears up to 3 mm for pre-cutting roll material Pressure unit End trimming unit Multi-function milling unit for flush trimming, radius milling, and bevel milling Corner copying unit for head edges up to 2 mm, activatable from the control panel Radius scraper blade Flat scraper blade Buffing unit Spraying device at infeed and outfeed Year of manufacture: 2018 Machine is OPERATIONAL and in GOOD CONDITION Ex works price NET €15,000.00

Condition: good (used), Code: 0114 Brand: SCM MINIMAX Model: UNILEV 150 Prjdpfswh Uauox Agwoc Universal sanding machine for straight and round parts , furniture, window frames , panels, doors, window frames and various Technical data: Lenght of worktables mm 1440 Tilting worktable 0-45° Motor 3,3 Kw Sanding belt width mm 150 Sanding belt lenght mm 2170 Pneumatically controlled oscillating belt Suction port diameter mm 120 Overall dimensions: mm 1440 x 720 x 1550 h Weight kg 470

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 18 kW (24.47 HP), I am listing this machine on behalf of a customer! The edge bander is ideal for solid wood edges up to 20 mm thickness and 60 mm width! The machine is ready for immediate use. The edge bander is also equipped with a jointing cutter. Solid wood edges up to 60 mm wide and 20 mm thick can be edge-banded with this machine. The machine can still be inspected under power. Predpsxn Nuwefx Agwjc

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 020313L, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Flush milling unit With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile scraper knife Flat scraper knife Pedpoxn Hzbjfx Agworc Buffing unit Technical data: Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm CE standard

Condition: excellent (used), Year of construction: 2015, Edge banding machine Hebrock F 4 with jointing, corner copying, and two scraper blades. Very well-maintained machine from a small workshop, in excellent condition. Color touch-screen interface with PLC control for easy machine operation, allowing storage of up to 10 user programs. Edge thickness for roll material approx. 0.4 – 2 mm Workpiece height approx. 10 – 40 mm Feed rate approx. 7 m/min Soundproof enclosure Extendable workpiece support Extraction connection: 1 x 140 mm Units/Features: - Manual pressure beam adjustment with SIKO counter - Manual infeed fence adjustment with SIKO counter - Manual edge thickness adjustment with SIKO counter - Jointing with diamond cutters, blades re-sharpened - Gluing section with automatic edge feed for roll material up to 2 mm - Glue pot with quick-change system for rapid color changes - Pressure zone with 3 rollers - End trimming saw - Combination milling unit, R2 with pneumatic adjustment between thin and thick edge - Radius scraper R2, pneumatically retractable Pedpfx Asw Sn I Eegwsrc - Corner rounding unit R2, pneumatically settable between thin and thick edge The contour milling unit can also be used for shelf processing, i.e., only the straight edge is rounded, not the corners - Glue joint scraper, pneumatically retractable Other features: - Hood locking - CE marking - Operating manual A video of the machine in operation can be provided upon request. All indexable inserts of the milling units and scrapers have been replaced or rotated; saws have been sharpened. The machine is therefore immediately ready for use. The diamond jointing cutters have also been sharpened. Paintwork touch-ups have been carried out. The machine has approx. 335 operating hours and has only processed approx. 20,700 linear meters of edging material. The machine is in very good condition; see original photos. Machine dimensions: approx. 4050 x 1100 x 1400 mm (LxWxH) Weight: approx. 800 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See “more offers from this provider.”

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Brand: SCM Model: OLIMPIC K 500 T/ER-2 - CE Automatic edge banding machine with edge sanding unit for processing edges made of wood, veneer, PVC, melamine, ABS – suitable for furniture manufacturing, joinery, custom fittings, panels, kitchen and bathroom furniture, and various other products. Technical data: Min./max. panel height: 8–60 mm Panel height with rounding unit: 10–45 mm Edge thickness: 0.4–8 mm Edge thickness in roll: 0.4–3 mm Minimum panel width: 55 mm Feed speed: 11 m/min Pressure beam with motorized vertical adjustment Panel support arm Sound-insulated safety cabin Fluid inlets Configuration: Podpfx Agjxnvr Aswjrc Anti-adhesive application unit with two nozzles – two separate tanks for anti-adhesive fluid Pre-milling unit with two high-frequency motors – diamond tools H64 mm – diameter 100 mm, F 30, h 65 – copying kit included VC 560 gluing unit for applying edging to panels up to 60 mm – glue pot capacity: 1.5 kg – interchangeable glue pot End cutting unit with two independent motors, each 0.35 kW at 12,000 rpm – motor tilt from 0° to 15° – 2 saw blades, 115 mm diameter – face copiers Tilting trimming/bevelling unit for trimming excess edging top and bottom – 2 motors of 0.55 kW each – 12,000 rpm – tilt from 0° to 25° – 2-position pneumatic quick-change kit for processing thin or radius edges Corner rounding unit with two motors on precision guides – enables rounding and trimming of thin and thick edges – 2 motors of 0.55 kW each – 12,000 rpm Edge scraping unit for optimal finishing of ABS/PVC edging with rotating tracing guides, extraction hood, and trimming waste cassette Glue scraping unit – removes glue residue from the lower and upper panel surfaces Brushing unit for cleaning and polishing plastic edges – motor 0.25 kW – brush diameter 150 mm Compressed air: 7 bar Overall dimensions: 5500 x 1150 x 1550 (H) mm Weight: 1,780 kg

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 - 3 mm (6 mm) Control panel with selector switches for aggregate setting Fully automatic edge magazine for both rolls and strips Glue application station: Cartridge + PU gluing Workpiece height 6-55 mm Pneumatic pressure unit End trimming unit for rolls and strips up to 3 mm (6 mm) edge thickness With adjustable mitering of trimming saws from 0-10° Milling unit for flush milling, radius milling, and chamfer milling - 15° Scraper unit for chamfers and radii Surface scraper unit - finishing Pjdpfx Ajxlz Nzsgworc Machine is TESTED and in TOP CONDITION from a very well-maintained craft shop Available ex-stock Lieboch at INVENTORY CLEARANCE FIXED NET PRICE €8,900.00

Condition: used, Year of construction: 1991, EDGE SANDING MACHINE LZK 4: Langzauner edge sanding machine LZK Machining and sanding of all types of wood, also in combination with plastics Year of manufacture: 1991 Motor power: 3 kW Belt speed: 22 m/sec Belt dimensions: 3000 x 200 mm Table size: 1250 x 350 mm Psdsw A Aa Eopfx Agwerc Height adjustment range: 200 mm Extraction port diameter: 110 mm Minimum air speed: 20 m/sec Extraction capacity: 700 m3/h Total weight: 450 kg Total connected load: 3.2 kW Operating voltage: 3 x 380 V 50Hz Required space: 1900 x 900 mm All technical data and information as per brochure

Condition: like new (used), Year of construction: 2019, I sell the edge banding machine Biesse JADE 240 Year 2019. Special offer: Machine almost NEW !! Configuration: Entry fence manual adjustable Premilling pneumatic adjustable Edge banding manual adjustable / 2 glue tanks for EVA glue Pressure zone manual adjustable End cutting saw pneumatic adjustable Tilting radius milling manual adjustable Corner rounding unit 2-motor manual adjustable Radius scrapers manual adjustable Glue scrapers pneumatic adjustable Polishing brushes Separation fluid spraying front Central lubrication system Top feeding rolls Height adjustment manual Material height 10-60 mm Edge thickness 0,4-8,0 mm Feeding speed 12 m/min. Prodpfxoxncrvo Agwjc Only 9250 meters edgebanded. Machine almost NEW !! CE Mark. Including full documentation and CDs. Very good condition ! Available immediately !

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, LiSEC, KSR-25, Right – Left, year 2010 Vertical Glass Edge Seaming Machine, h=2,50 m Vertical compact grinding machine for the seaming of glass sheets on all four sides in a fully automatic cycle. Prodpfxjv Eguye Agwjc Inspection during production is possible by appointment. In very good working condition. Available: March / April 2025.

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Equipment and technical specifications: Machine completely overhauled and serviced Feed speed steplessly adjustable from 10–18 m/min Edge Control 19 control with 18.5" touchscreen color display Jointing milling unit Pjdpfxewka N To Agwerc Edge feeding unit Glue application station: cartridge with sensing nozzle, with automatic glue height adjustment Pressure unit End trimming unit Multi-function milling unit Corner copying unit Radius scraper unit Flat scraper Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice

Condition: new, The KF 200 is a robust Edge Beveling Machine from KNUTH, designed for efficient chamfering, deburring, and 45° beveling of steel, aluminum, and a variety of other materials. Its compact dimensions and simple operation make it particularly well-suited for large workpieces, including heavy metal sheets and long profiles. With tungsten alloy blades, the KF 200 offers superior tensile strength, hardness, and longevity, ensuring that demanding tasks are executed with precision. This machine operates at a speed of 3,500 revolutions per minute and can achieve chamfer heights ranging from 0 to 5 mm, making it versatile for different applications. Standard equipment includes a set of cutting inserts and an operator manual, allowing you to start working immediately. Whether you're preparing weld joints or performing intricate deburring tasks, the KF 200 stands out in the Edge Beveling Machines category. To enhance your production capabilities, request a quote today and elevate your sheet metal processing with KNUTH. Psdpfxjq Ny R Ss Agworc

Year of construction: 1998, condition: good (used), Edge milling machine, manufactured by IMAC year of construction 1998 . Predpfexh Dthsx Agwjc Model : CB 18 . Series : B20 .

Condition: used, Year of construction: 2010, Edge thickness 0.4 - 10.0 mm; cross-cut saw unit; radius scraper unit; flush and radius milling unit; joint milling unit; polishing unit; corner rounding unit; spraying of release agent; spraying of cleaning agent; interchangeable glue pot; cross-cut saw unit e-motion; combination milling unit e-motion. Storage location: customer Podpfx Asxguvqjgwerc

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine HOMAG KAL370 AMBITION 2474, year 2015: Configuration: Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank + AirTec System Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Prodpfx Agexnb Uvewsc Tilting radius milling top + bottom servomotorical adjustable Corner rounding 4-motor pneumatic adjustable Radius R2 + multiradius scrapers servomotorical adjustable Glue scrapers servomotorical adjustable Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Entry magazine for two bands in rolls automatic Working thickness adjustment servomotorical driven Material height 8-60mm Edge thickness 0,4-20mm Feeding speed up to 25m/min. Total length including feeding plate 8365mm Kilometerstatus 1.166.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: good (used), 1 x edge sanding machine Christians KB 2 Technical data: Working range: Ruler length: 370 mm Sheet thickness: 0 to 2 mm, max. edge clearance with completely opened rulers 3 mm Speed: 3400 rpm Predpfx Agofwx Daowoc grinding wheel 150 x 125 x 42 mm + 125 x 90 x 42 mm Accessories: 2 x grinding wheel with flange 1 x additional flange 1 x key for grinding wheel change The machine can be inspected under power.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: The machine has been completely overhauled: - new Glue Jet 301 gluing system (top part 1 mm) - all units checked - all cutters sharpened - all knives replaced Electrics for stepless feed: 400 V / 50 Hz, 2.2 kW Motorized pressure bridge adjustment Automatic chain lubrication PPC 315 control system with 15" touchscreen ECO MODE energy saving function Infeed fence 1350 mm, motorized adjustment Jointing milling unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 milling units for edge jointing - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation for jointing unit Edge feeding unit 1901 fully automatic Glue application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Granulate hopper Pressure unit 1913 MOT End trimming unit 1918 (60 mm) pneumatic Psdpfxswka Iie Agwsrc Multi-functional milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left-hand rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right-hand rotation Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left-hand rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right-hand rotation with CM technology Scraper unit 1929 MOT2: - HW reversible knives for scraper holder R = 2.5 mm (2 pcs required) Flat scraper 1964 Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short notice Location: 65439 Flörsheim

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT ProfiLine KDF 790, year 2006: Configuration: Entry fence manual adjustable Prodjh U Nzpjpfx Agwsc Premilling manual adjustable Edge banding with preheating tank Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Rough milling top + bottom manual adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor servomotorical adjustable Radius R2 scrapers pneumatic adjustable / Second set for R1 included Glue scrapers manual adjustable Grooving saw Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 20m/min. Total length including feeding plate 7860mm Kilometerstatus 1.650.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Prsdpfx Agjw I U E Aowsc Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine HOMAG KAL370 AMBITION 2280, year 2015: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 4-motor manual adjustable Radius R2 scrapers pneumatic adjustable / Second set for R1 included Glue scrapers manual adjustable Polishing brushes Separation fluid spraying in the front Prodpfxjxnbx Is Agwjc Cleaning fluid spraying in the back Working thickness adjustment manual driven Material height 8-60mm Edge thickness 0,4-20mm Feeding speed up to 20m/min. Total length including feeding plate 9365mm Kilometerstatus 2.926.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: used, Used machine Prjdpfx Agswwxykewoc