Used Edge Bending Machine for sale (92,795)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total length: 2,800 mm, workpiece height (max.): 45 mm, edge thickness (max.): 5 mm, input voltage: 400 V, working height: 900 mm, chip removal: 2 mm, Special Price!! Felder Edge Bander – As New, Exceptionally Maintained, Year of Manufacture 2022, Commissioned 2023 We are selling our Felder edge banding machine from 2023, which is in like-new, exceptionally well-maintained condition. The machine was delivered new and put into operation in May 2023 and has since operated reliably, precisely, and without faults. Rcsdpfxjxq Tkze Ag Aoh It is single-owner and has been serviced exclusively by Felder’s own technicians. Sale only due to upgrading to a larger model. ⸻ Technical Details & Condition • Year of manufacture / delivery: May 2023 • Single-owner – purchased directly from Felder • Regular service by Felder • Exceptionally maintained, immediately ready for use • Can be inspected and tested under power ⸻ ⚙️ Features & Upgrades • Fence extension installed → allows single-person edging of long workpieces • Additional brush rows before the unit → perfectly remove dust and edge trimmings • Result: Clean, precise edges with a perfect radius on every workpiece • Runs quietly, precisely, and reliably – ready for immediate use ⸻ ✅ Key Advantages at a Glance • Machine has seen very little use, therefore nearly as new • No investment required – ready to operate immediately • Exceptionally well-maintained condition, directly from a woodworking shop • Ideal for small to medium-sized companies that value quality and precision 2 x Glue Pots: one for transparent glue and one for white, but can also be filled with other colors. ⸻ Location: 73650 Winterbach Price: €14,900 net, VAT can be shown separately. Contact: mRube Montage und Bauservice Viewing and test run available at any time by arrangement. Machine must be collected – just set it up and start working!

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed Rodpfxjxpqy Do Ag Aech - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 3620 € 38 mm 245 mm 300 mm 320 mm 23 kg 19 cm³ 38 x 1,5 mm 38 x 1,5 mm 35 x 3 mm 30 x 2 mm 35 x 1,5 mm 42 x 1,5 mm 42 x 1,5 mm 50 x 2 mm 50 x 2 mm 50 x 4 mm 20 mm 10 x 25 mm 25 x 20 (stehend), 25 x 1 mm 180 mm 36 mm 10 mm 2,8 U/min 0.9 kW digital adjustment of the bending angle from 0 - 180 ° Rcjdpfx Ajwiqxiog Aoh single phase motor 220V / 900W electric engine brake indicator light for indicating overload basement made of cast iron, suitable for mounting a tripod (tripod not included) 90° bend in 6 seconds foot pedal without tools OPTIONAL EQUIPMENT: tripod € 330,-

Condition: used, Year of construction: 2022, 0,4 - 5 mm Workingpiece thickness from to 10 - 45 mm Feed speed 8 m/min. Rodpfsxpn Ufox Ag Ajch

Condition: good (used), Year of construction: 2007, Max. pane height: 2700 mm. Connected load: 400V AC/50Hz/3.1A Total length with inlet and outlet: approx. 7700 mm. Max. height: approx. 4200 mm. Rcodpfxexq Rp Io Ag Ash Weight: 2550 kg. Condition: good, second-hand.

Condition: new, pressing force: 10 t, - Capacity 10 tons - Bending capacity 150 x 8 mm - stroke 200mm - NC touch screen control - Foot control - Emergency stop Rsdpfx Asu Sl U Aog Asch - 400V

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 150 kg, warranty duration: 24 months, Box&Pan / Segment Bending / Folding Machine for Sheets RBP-125+ – Precision Bending in a Professional Edition Toolless removable bending fingers The box&pan / segment press brake, is an advanced device that enables the creation of complex profiles and precise bends that are not possible with a conventional roofing bending machine. Thanks to the segmented construction of each beam, our sheet metal folding machines offer versatility and precision, allowing for even the most demanding processing tasks. Versatility and Precision Our offer includes segment folding machines in three working lengths, making them suitable for various industries. The RBP-125+ model is the perfect solution for professionals who value quality and accuracy. The 700 mm working length allows for bending sheet metal up to 0.7 mm thick, making it indispensable for the most complex roofing projects, including standing seam processing and forming KARO tiles. Innovative Construction In the RBP series models, all three rows of bending teeth – clamping beam, bending beam, and fixed beam – are removable and adjustable, providing full flexibility in handling different materials. This solution ensures maximum precision and ease of work while allowing the machine to be adapted to the user's specific needs. Technical Specifications – Segment Folding Machine RBP-125+ with toolless removable bending fingers: Rjdpfx Agov Dvmie Aoch Maximum bending capacity: Standard Steel: up to 0.7 mm Aluminum: up to 1.0 mm Copper and zinc: up to 1.0 mm Stainless: up to 0.4 mm Working length: 1250 mm Bending beam thickness: 15 mm Maximum bending angle: 160° Upper bending fingers clearance: 65 mm Lower bending fingers clearance: 45 mm Weight: 130 kg Ideal for Professionals The RBP-125+ segment folding machine is an excellent choice for roofers, sheet metal workers, and workshops engaged in metal processing. Thanks to its sturdy construction and high-quality craftsmanship, it ensures durability and reliability in everyday use. If you are looking for a tool that combines precision, durability, and functionality, our segment press brake will meet your expectations. 📞 📧 Contact us for more information and to find the perfect model for your needs!

Condition: good (used), Year of construction: 2013, Edge Banding Machine Manufacturer: Brandt Type: KDF 440 Year of Manufacture: 2013 Edge Thickness: 0.4 - 3 mm Workpiece Thickness: 8 - 60 mm Feed Rate: 8 - 14 m/min, Vario Joining Unit: Yes Rcedpfxjwmby Sj Ag Aeh Pre-melting Unit: Yes Cross-Cut Saw Unit: Yes Radius Flush Trimming Unit: Yes Corner Rounding Unit: Yes Radius Scraper: Yes Surface Scraper: Yes Buffing Unit: Yes

Condition: good (used), functionality: fully functional, Year of construction: 2012, Digital display - Year of manufacture: 2000 - Documentation available: No - CE marking present: Yes - Control: Conventional - Motor power: 2.2 kW Rcedpfx Agsxn Tdpe Ajh - Capacity: 40 mm - Model: section bending machine - Shaft diameter: 60 mm - Transport dimensions: 1200 mm x 1200 mm x 1300 mm (L x W x H) - Transport weight [kg]: 1,000 kg - Number of transport packages [pcs]: 1

Condition: excellent (used), Bargain from liquidation with feed and oscillation Rjdpfxexn Skzj Ag Ajch

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3 h, functionality: fully functional, pressing force: 20 t, working width: 1,250 mm, travel distance Y-axis: 1,270 mm, sheet thickness (max.): 6 mm, working length: 1,250 mm, No minimum price – guaranteed sale to the highest bidder! Machine from a training workshop with only 3 hours of punching time! Submission of a bid obligates timely collection by 21/11/2025! TECHNICAL DETAILS Pressing force: 200 kN Maximum sheet thickness: 6 mm Turret stations: 51 Auto-index stations: 4 Y-axis travel: 1,270 mm Working area: 1,250 x 1,250 mm MACHINE DETAILS Control system: AMNC-F Weight: 12,500 kg Electrical data Rcsdpfx Agjxn Rvis Aeh Full load current: 55 A Short-circuit current: 25 kA Power consumption: 19 kVA Nominal voltage: 200 V Frequency: 50 Hz Operating hours Punching time: 3 h Power-on time: 895 h EQUIPMENT Solution Pack Blank School offline software AP100 2D CAD Production Designer 3D VPSS3i Blank Tooling package valued at EUR 8,000

Condition: new, – Capacity: 34 x 3 mm – Digitally adjustable stroke – Emergency stop switch – With 3 tool sets: 33.7 mm, 21.4 mm, 16 mm – Documentation – Weight: 80 kg – 400V Rsdjxq Hl Eepfx Ag Aech

Year of construction: 2006, condition: excellent (used), Swing angle 135 Motor 1.1 kW table height 860 mm Rodpfxehr D Aye Ag Aoch table surface 800×1000 mm spindle dimension 28 x 90 mm spindle speed 1500 rpm with feed unit: Fields S/308, year 2011 and accessories

Condition: used, From a business closed some time ago, we offer the following folding machine: Schröder AKV 250 bending brake Bending capacity slightly over 2.5m Bending capacity in steel – 1.5mm, more for aluminum Foot-closing device Angle display Optional back gauge or other accessories such as segmented top beam, etc. available Rodpfx Agjtul A To Aoch Schechtl MT 250 guillotine shear Depth stop Sheet extraction table Cutting length slightly over 2.5m Cutting thickness 1.25mm Alternatively, several other guillotine shears from Schröder or Schechtl are available Additionally, we have many more of these machines in stock, as well as equipment and tools for sheet metal processing.

Condition: like new (used), functionality: fully functional, Year of construction: 2014, Hydraulic profile bending machine Fast delivery time, prior sale reserved Country of origin: Turkey In stock: 1 Shaft diameter: 60 mm Roller diameter: 177 mm Number of driven rolls: 3 Motor power: 3.7 kW Speed: 6 m/min Rcodpfjxn Tbhox Ag Ash Flat bar upright (section/min. diameter): 70x10 mm / 600 mm; 30x10 Flat bar horizontal (section/min. diameter): 90x25 mm / 500 mm; 50x5 mm Square steel (section/min. diameter): 40x40 mm / 500 mm; 20x20 Round steel (section/min. diameter): Ø 40 mm / 500 mm; Ø 20 mm Tube (section/min. diameter): Ø 60x2 mm / 600 mm; Ø 20x Formed tube upright (section/min. diameter): 80x40x3 mm Square tube (section/min. diameter): 60x60x4 mm External angle iron (section/min. diameter): 50x5 mm / 1,000 mm; 30x4 Internal angle iron (section/min. diameter): 50x5 mm / 500 mm; 30x3 mm Length: 1160 mm Width: 1000 mm Height: 1175 mm Weight: 1194 kg Demo machine / as-new condition

Condition: like new (used), Year of construction: 2022, operating hours: 5 h, functionality: fully functional, feed rate X-axis: 9 m/min, total length: 3,700 mm, workpiece height (max.): 50 mm, height adjustment type: mechanical, input voltage: 400 V, tank capacity: 1 l, Automatic edge banding machine with lower glue pot for hot melt adhesive (EVA), feed chain conveyor, jointing and trimming unit, and corner rounding unit Feed speed: 9 m/min Panel thickness: 50 mm Edge thickness (rolls): 3 mm Edge thickness (solid wood strips): 5 mm Chain feed Pre-milling and jointing unit Corner rounding unit Unit adjustment via edge pieces Simple and intuitive operation Machine features: - Display: 7” color touchscreen - Capability to work with storable programs - Graphic interface shows the processing outcome directly on the panel - Single-click selection of desired processing mode Interchangeable glue pot: - 6 heating elements ensure consistent, even glue temperature - Motorized glue application roller with internal electric heating element - Teflon-coated glue pot for quick and thorough cleaning - Quick-change device allows fast and simple replacement of the glue pot - Glue pot capacity: 1 kg - Depending on glue type, two different temperatures with automatic standby function can be set Tool kit R = 2 mm - Fast changeover between processing modes: thin edge, radius, solid wood strips - 2 high-frequency motors, 200 Hz, 12,000 rpm - Flush trimming unit with multi-profile tool for thin edge and radius (solid wood) - Nesting - Scraper unit - Surface scraper Buffing unit: - The machine is equipped with a buffing unit Cleaning spray aggregate: - Electronically controlled spray function - 2 spray nozzles (top and bottom) and fluid reservoir LED interior lighting: Rjdpow Dq Hcofx Ag Aech - LED interior lighting allows safe adjustment of units even in low ambient light

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine must have. A solid cast iron sanding unit with a powerful powerful motor ensures maximum sanding performance. The working table, adjustable in height by spring pressure, allows optimum belt utilization and safe working. Belt oscillation, infinitely variable unit swiveling, and veneer unit, a veneer sanding device and an additional table for and an additional table for sanding work on the on the deflection roller. Rjdpfx Agjd R Ev Dj Aoch The machine is supplied with an assortment of sanding belts; an angle and miter fence is also included. Technical data: - Motor power: 2.2 kW - sanding belt size: 150 × 2280 mm - grinding belt speed: 22 m/sec. - table size: 750 × 350 mm - space requirement: 1000 × 800 mm - weight: from 180 kg - Suction Ø: 100 mm Location: Ex warehouse 54634 Bitburg - free loading - Can be shipped for a fee

Condition: good (used), Mandrel pipe bending machine, LANG type EL 45 Technical data: for pipe diameter 45 x 2 mm Mandrel holder length 2,000 mm Bending speed for 90° approx. 3 s Electrical connection 380 V, 2.2 kW Weight approx. 1000 kg with tool: 16 x R 76 22 x R 76 28 x R 75 35 x R 105 Rcodpfjqff E Ejx Ag Aeh

Condition: good (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder and a folding machine from the top manufacturer RAS from Sindelfingen. Machine features: - Cuts (see nameplate) up to 2.5 mm steel - Working length: just over 2 meters - Back gauge: 500 mm - Side/angle gauge - Extendable front support - Foot pedal - Reversible blade - Weight approx. 1300 kg This machine comes from the insolvency of an aluminum parts manufacturer who primarily supplied the automotive industry — has been tested, cleaned, can be inspected and tested — warranty excluded. RAS Folding Bench: - Capacity: 2.5 mm steel, more for aluminum Rcjdpfx Asxqpiyeg Aoh - Bending length: just over 2 m - Adjustable depth stop from the front, can also be used as an excellent sheet support - Hand and foot control - Machine comes from a reputable company and has been professionally checked before sale - Weight: see photo - Optional: a segmented rail (segment bar) from RAS is also in stock - Invoice with VAT shown separately - Shipping can be arranged upon request Free loading as shown in the pictures Inspection and testing are possible by telephone appointment — 0175 248 1975. Payment in cash upon collection — if there’s anything else I can do for you, please give me a call. Thank you. Collection should take place within 8 days after the end of the auction. Location: 97261 Güntersleben

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Redpfxslht Hws Ag Asch F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -

Condition: used, Year of construction: 1984, Technical data: Longitudinal travel (x-axis) 15,900 mm Horizontal feed path (z-axis) 790 mm Vertical feed path (y-axis) 500 mm Swivel range of the milling spindle 45°F +/- Milling spindle drive power of the DC motor 50 kW Milling spindle diameter in the front bearing 160 mm Inside tool holder ISO No. 50 DIN 2079 Outside tool holder ISO No. 60 Tool feed - manual via threaded rod M24 Spindle speeds continuously adjustable in 2 ranges from 50-500 rpm. Speed range in the 1st stage 50-250 rpm. Speed range in the 2nd stage 100-500 rpm. Step step 1:2 Range of constant power 160 rpm. Max. torque on the milling spindle 2,000 Nm Milling feed in the x-direction continuously adjustable from 40-4,000 mm/min. Rapid traverse 8,000 mm/min. Adjustment speed in the y and z-direction continuously adjustable from 20-500 mm/min. Rapid traverse for the y and z-axis 1,000 mm/min. Max. swivel speed for the milling spindle 2°/sec. Display resolution of the 3 axes (positioning accuracy) 0.1 mm Operating voltage 380 volts 50 Hz Control voltage 220 volts Rcodpfxevvll Ss Ag Ash Distance from the clamping table to the retracted, horizontally positioned milling spindle nose 500 mm Distance from the cheek support (floor) to the middle of the milling spindle in the vertical middle position 1,300 mm Distance from the clamping table to the middle of the support guide 2,300 mm Length of the cheek and support guide 16,800 mm Weight approx. 23,000 kg Defects: some leaks on the clamping cylinders

Condition: good (used), You are bidding here on a machine set from Schechtl with a capacity of 3mm. Machine Specifications: Schechtl MAB - Bending length: slightly over 2 meters - Sheet thickness: 3mm steel, more for aluminum - Optional: new boxed segment set; used set with significant wear is included free of charge (the machine was used in a training workshop) - Current new price: see pictures Rjdpfxsxqmmie Ag Aoch - Hand and foot operation - Optional: back gauge and additional rails Guillotine Shear MSB 200 - Cuts 3mm steel, significantly more for aluminum - Cutting length: slightly over 2 meters - Front gauge - Back gauge: 750 mm - Optional: sheet metal tray Free loading available New price for such a set is approx. €80,000 net (without accessories) You will receive an invoice with VAT shown Shipping can be arranged upon request Free loading as shown in the photos Inspection and test run available by appointment – please call 0175 248 1975. Payment in cash upon collection; if you need anything else, feel free to call me – thank you Collection should occur within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item numbers: 251007 and 251008

Condition: excellent (used), Year of construction: 2001, Langzauner edge sander EK 3/4 top condition Accessories: some abrasives still available Veneer stop jaws Table width: 350 mm Table length: 1,000 mm Maximum sanding belt width: 150 mm Sanding belt length: 3,000 mm Belt speed: 22 m/s Main motor: 2.2 kW Motorized feed Veneer sanding Circular sanding support Oscillation Height adjustment: table, manual Sanding belt pivotable: Yes Conformity marking: CE mark Total connection: 4.6 kW Space required: Length: 1.7 m Rodpfx Aevr Hw Iog Ajch Width: 0.85 m Height: 0.9 m Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Rcodpfxoi Am U Do Ag Aeh Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: new, Year of construction: 2025, The Hebrock F 2 Redpolht Hzjfx Ag Ajch The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)