Used Eccentric Press Schnegg for sale (12,817)

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, throat depth: 450 mm, Very good condition! With gearbox: Ljdpszc Rw Refx Amajhk Capacity: 300 t Strokes: 35 spm Throat depth: 450 mm - Pneumatic clutch - Ram weight balance Ram stroke: 20 - 140 mm Ram adjustment: 80 mm Motor power: 30 HP

Condition: excellent (used), Year of construction: 2001, Manufacturer: ROVETTA Model: S4-800 Ljdpfeyq Tdpox Amaehk Year: 2001 Condition: Used Stock number: 0392 Builder: Rovetta Slide force: 800 tons Number of driving points: 4 Slide stroke: 700 mm Slide adjustment: 350 mm Strokes per minute: 10-24 Die height (low stroke, high slide adjustment): 1,100 mm Usable distance between front posts: 4,200 mm Bolster table size: 4,000 x 2,000 mm Slide dimensions: 4,000 x 2,000 mm Movable table height: 600 mm Side window size: 3,400 x 1,900 mm Number of cushions: 1 Blankholder cushion - total force: 150 tons Lower blankholder cushion stroke: 250 mm Lower blankholder working area: 1,500 x 1,000 mm.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, TECHNICAL CHARACTERISTICS: ROSS Press Model: T50 Nominal force: kN 500 Min./max. slide stroke: mm 8÷100 Max. slide adjustment closed height: 70/275 Speed: c/min. 90 Clutch pressure: Bar 5.5 Motor frequency (Hz) / speed (r/min): 50/1410 Ljdpfx Amou Rdw Hsaohk Work surface size: L=650 x D=520; Shank hole: Ø50 Protrusion at the center of the ram: mm 260 Front passage: mm 290 Machine stop: PMS (top dead center) Complete with user manual and CE conformity Six (6) month warranty excluding electronic parts. NEW COMPONENTS INSTALLED: • Safety guards with safety keys; • Motor bearings; • Electrical panel; • Brake/clutch group; • Two-hand control; • Pedal; • Air regulator; • Plan revived on CNC machine

Condition: used, pressure 45 t throat 230 mm stroke 10 - 140 mm no. of strokes 80 Hub/min ram adjustment 55 mm Lhodpfeykb Ddjx Amaok total power requirement 3,0 kW weight of the machine ca. 2,7 t

Condition: used, pressure 35 t throat 300 mm stroke 10 - 120 mm no. of strokes 110 Hub/min ram adjustment 50 mm Lhsdpjykb D Rsfx Amajk total power requirement 3 PS

Condition: excellent (used), Year of construction: 2001, Manufacturer: ROVETTA Model: S4-1500 Link Drive Year: 2001 Condition: Used Stock number: 0391 Manufacturer: Rovetta Number of strokes: 4 Ram force: 1500 tons Ram stroke: 763 mm Ram adjustment: 400 mm Daylight (bottom dead center, ram up): 1,200 mm Distance between front uprights: 5,700 mm Die bed dimensions: 5,500 x 2,500 mm Ram dimensions: 5,500 x 2,500 mm Moving table height: 600 mm Lsdpfeyq Tdiex Amaohk Side window size: 3,400 x 1,900 mm Main motor power: 319 kW Blankholder (total force): 150 tons Blankholder stroke: 250 mm Blankholder working area: 2,000 x 1,200 mm Strokes per minute: 8-24

Condition: used, Year of construction: 1992, pressure 25 t throat 375 mm stroke 8 - 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm Ljdpeykb Dksfx Amaehk total power requirement 1,5 kW weight of the machine ca. 2,5 t

Condition: used, RICHTER 315t PRESSURE: 315 tons DAYLIGHT: 500 mm Lsdpfx Amszmmvisaohk TABLE: 1500 x 1250 mm WEIGHT: 23,000 kg

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton Standard configuration Lodeuqdwxepfx Amaehk Machine included: - Fence HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: new, Year of construction: 2025, power: 5.5 kW (7.48 HP), pressing force: 80 t, table width: 660 mm, table length: 860 mm, punching force: 80 t, drop-through hole in table: 180 mm, stroke adjustment: 110 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press that operates via a force generated by an eccentric mechanism and is used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 80 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for mass production. Key Advantages: - Stable stroke performance and high repeatability in serial production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual-hand/foot control Typical Applications: Lodpevtx H Refx Amajhk - Cold shearing and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided guided slide • Spheroidal graphite cast iron connecting rod and gear bushings • Crankshaft and transmission shafts made of 4140 tempered steel • Centralized, fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Double-coil safety valve • Manually adjustable stroke • Finger–hand protection light curtain safety system • PLC control system • Dual-hand/foot control system • Mechanical locking system • Emergency reverse motor operation • Occupational safety regulation compliant • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounting pads • Touchscreen LCD panel (standard between 150–300 tons) • Hydraulic safety system (standard between 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener • One die set to requested specifications • Eight-way slide guides ✅ TECHNICAL SPECIFICATIONS (80 TON) Capacity: 80 Ton Throat depth: 280 mm Bed–ram distance: 400 mm Slide–table distance: 420 mm Distance between side frames: 400 mm Ram adjustment (slide adjustment): 85 mm Approx. press width: 1400 mm Approx. press depth: 1735 mm Approx. press height: 2220 mm Front anchor dimension: 670 mm Side anchor dimension: 1040 mm Table hole diameter: Ø190 mm Table size: 540×740 mm Die clamping hole diameter: Ø40 mm Ram size: 370×230 mm Bed height from floor: 755 mm Stroke adjustment: 10–100 mm Strokes per minute: 45–75 spm Motor power: 7.5 kW Motor speed: 1450 rpm Approximate weight: 4000 kg Note: Please inform us if you require modifications in the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. All sales, commissioning, and after-sales processes are directly managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, power: 15 kW (20.39 HP), pressing force: 160 t, table width: 920 mm, table length: 660 mm, throat depth: 320 mm, punching force: 160 t, ram bore: 55 mm, warranty duration: 24 months, Equipment: safety light barrier, Eccentric presses are mechanical presses that operate with force generated via an eccentric mechanism and are used in cold forming operations such as punching, cutting, and forming with dies. Thanks to their high production speed and repeatability, they provide an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 150 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance for serial production. Key Advantages - Stable stroke performance and high repeatability in serial production - Operator safety-oriented design (light curtain + safety systems) - Reduced maintenance needs with centralized automatic lubrication - PLC control + dual hand/foot control for production-ready operation Application Areas - Cold cutting and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided slide guidance • Spheroidal cast iron connecting rod and gear bushings • 4140 quenched and tempered steel crankshaft and transmission shafts • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Dual-coil safety valve • Manually adjustable stroke • Finger and hand protection with light curtain safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock system • Emergency reverse motor operation Lsdpfxjvtywdj Amajhk • Compliant with occupational safety regulations • Meets CE standards ✅ OPTIONAL FEATURES • Anti-vibration mountings • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare die plate • Decoiler, feeder, and straightener • One set of die to customer specifications • 8-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton Throat depth: 320 mm Bed-to-ram distance: 500 mm Slide-to-table distance: 540 mm Distance between uprights: 500 mm Ram adjustment (stroke): 120 mm Approx. width: 1600 mm Approx. depth: 2280 mm Approx. height: 2750 mm Front anchoring size: 840 mm Side anchoring size: 1300 mm Bed bore diameter: Ø220 mm Table size: 660×920 mm Die mounting hole diameter: Ø55 mm Ram size: 600×290 mm Floor-to-table height: 805 mm Stroke adjustment: 10–125 mm Strokes per minute: 42 spm Motor power: 15 kW Motor speed: 1450 rpm Approximate weight: 7100 kg Note: If you require changes in technical specifications, please let us know. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 70300 € 1328.67 € 100 to 4.5 mm 700 mm 1000 mm 210 mm 1 - 132 mm 58 1/min 6 90 mm 60 mm 300 mm 445 mm 7.5 kW 1650 mm 1545 mm 3011 mm 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads € 192,00 bolster plate Lhodpewiqq Sofx Amajk € 2.580,00

Condition: used, Year of construction: 1998, Beutler P96-C630 - Eccentric Press - Mobile control panel - Infinitely variable drive - Clutch/brake combination - Overload protection in the ram - Light barrier - Gooseneck lamp - Year of manufacture: 1998 Technical Data - Force: 630 kN - Stroke: 12 - 120 mm - Strokes per minute: 30 - 130 - Max. run-on time: 96 ms - Throat depth: 300 mm - Distance table/ram: 495 mm - Gap between frame walls: 270 mm - Ram area: 450 x 360 mm - Ram adjustment: 120 mm - Table area: 800 x 560 mm - Table opening: Ø 100 mm - Working height: 880 mm - Min. safety distance: 192 mm Lhedoyna N Topfx Amaok - Drive power: 5.5 kW - Operating voltage: 3x 400 V / 50 Hz - Machine dimensions (W x H x D): 1800 x 2600 x 1600 mm - Control cabinet dimensions (W x H x D): 800 x 1700 x 450 mm - Weight: approx. 5500 kg

Condition: new, Year of construction: 2021, functionality: fully functional, For sale: Metal Stamping Press JINAOLAN ALP-25V (25T, 2021) Condition: Brand new, never used, original packaging. We use several of these presses in our factory—photos show those units. Two brand new units available. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25V Year of Manufacture: 2021 Modern CNC-controlled eccentric press designed for forming, stamping, and punching various metal components. The press is equipped with a high-level operator safety system (Laser Safe), ensuring maximum operational safety. Technical Specifications: Ledsxniw Sepfx Amajhk - Rated Capacity: 25 tons - Stroke Rate: 60–140 strokes/min (SPM) - Stroke Length: 60 mm - Max Die Height: 200 mm - Die Height Adjustment: 50 mm - Slide Area: 470 × 245 mm - Bolster Area: 680 × 300 mm - Main Motor: 2.2 × 4 kW - Max Air Pressure: 0.51 MPa - Max Tool Weight: 0.30 t - Control: CNC (programmable control unit) - Safety System: Laser Safe – two-hand control system Application: This press is suitable for stamping, punching, bending, and forming metal parts. Thanks to CNC control and precision mechanics, the machine ensures high productivity, repeatability, and safety. Ideal for small and medium-sized manufacturing, metal component, and forming part production. Advantages: - Completely new, factory-sealed equipment - CNC control: precise and user-friendly programming - Laser Safe system: press can be lowered only when both hand controls are activated (two-hand safety) - Reduces risk of injury, complies with stringent safety standards - Robust construction and stable eccentric drive - 2 brand new presses in stock + several used units in operation If you have further questions, we are happy to answer them.

Condition: used, Year of construction: 1990, EBU 160t TYPE HK160F PRESSURE: 160t UP TABLE DIMENSIONS: 1000x500mm DOWN TABLE DIMENSIONS: 1200x800mm Lhodpfx Ajzktzyomaek STROKES PER MINUTE: 80 STROKE LENGTH: 20-200mm DAYLIGHT: 600mm POWER: 15kw WEIGHT: 17,500 kg THE MACHINE IS IN EXCELLENT CONDITION AND READY FOR LOADING.

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter Ledpfx Amotycdkjaohk - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, pressing force: 315 t, stroke length: 300 mm, Equipment: CE marking, Table dimensions (x-y/mm)  2150 x 1200 Ram dimensions X-Y (mm)  2000 x 1200 Stroke (mm)  300 Slide adjustment (mm)  200 Lhodpfx Aezi Rbbomask Strokes per minute  5 - 50 Side window dimensions (x-y/mm)  800

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Lhedpfxou D Dhxo Amaok Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW Lodpfxemi Rpis Amashk 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t

Condition: used, Year of construction: 1984, Press force 1,500 kN Adjustable stroke 20 - 120 mm Ram adjustment max. 85 mm Lhsdpfxjyg Ebxo Amaek Stroke rate 50 / 75 1/min. Machine weight approx. 8,000 kg Further data and images available on request

Condition: new, Year of construction: 2025, pressing force: 300 t, table width: 900 mm, table length: 1,200 mm, drop-through hole in table: 260 mm, ram adjustment: 150 mm, stroke adjustment: 200 mm, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 300 Tons Table-Ram Distance 530 Mm Distance Between Walls 1280 Mm Ram Adjustment 150 Mm Press Approximate Width 1700 Mm Press Approximate Depth 2200 Mm Ledpfjvyr Eaox Amaohk Press Approximate Height 3500 Mm Table Hole Diameter 260 Mm Table Size 900 / 1200 Mm Mold Clamping Housing Diameter 60 Mm Ram Size 470 / 900 Mm Table Dimensions from Floor 1000 Mm Stroke Adjustment 20 / 200 Mm Stroke Number/Minute 38 Pcs/min. Engine Power 30 + 2.2 KW Engine Speed 1450 RPM Approximate Weight 18,000 Kg

Condition: new, Year of construction: 2025, pressing force: 200 t, table width: 800 mm, table length: 1,070 mm, drop-through hole in table: 240 mm, ram adjustment: 130 mm, stroke adjustment: 160 mm, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, Ledpsvyr Diofx Amaohk o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 200 Tons Table-Ram Distance 500 Mm Distance Between Walls 1150 Mm Ram Adjustment 130 Mm Press Approximate Width 1500 Mm Press Approximate Depth 2000 Mm Press Approximate Height 3200 Mm Table Hole Diameter 240 Mm Table Size 800 / 1070 Mm Mold Clamping Housing Diameter 60 Mm Ram Size 450 / 800 Mm Table Dimensions from Floor 950 Mm Stroke Adjustment 20 / 160 Mm Stroke Number/Minute 40 Units/min. Engine Power 18.5 + 0.75 KW Engine Speed 1450 RPM Approximate Weight 14,000 Kg

Condition: new, Year of construction: 2025, pressing force: 250 t, table width: 850 mm, table length: 1,150 mm, drop-through hole in table: 240 mm, ram adjustment: 150 mm, stroke adjustment: 160 mm, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel Ledpfx Aovyr D Aomaehk o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 250 Tons Table-Ram Distance 520 Mm Distance Between Walls 1230 Mm Ram Adjustment 150 Mm Press Approximate Width 1600 Mm Press Approximate Depth 2100 Mm Press Approximate Height 3400 Mm Table Hole Diameter 240 Mm Table Size 850 / 1150 Mm Mold Clamping Housing Diameter 60 Mm Ram Size 470 / 900 Mm Table Dimensions from Floor 950 Mm Stroke Adjustment 20 / 160 Mm Stroke Number/Minute 40 Units/min. Engine Power 22 + 2.2 KW Engine Speed 1450 RPM Approximate Weight 16,000 Kg

Condition: new, Year of construction: 2025, pressing force: 125 t, table width: 700 mm, table length: 900 mm, drop-through hole in table: 210 mm, ram adjustment: 100 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, Lhsdpfx Aovxhqvjmaek o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 125 Tons Table-Ram Distance 500 Mm Distance Between Walls 1000 Mm Ram Adjustment 100 Mm Press Approximate Width 1250 Mm Press Approximate Depth 1750 Mm Press Approximate Height 2850 Mm Table Hole Diameter 210 Mm Table Size 700 / 900 Mm Mold Clamping Housing Diameter 55 Mm Ram Size 340 / 550 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 125 Mm Stroke Number/Minute 50 Units/min. Motor Power 11 KW Motor Speed 1450 RPM Approximate Weight 8,500 Kg

Condition: new, Year of construction: 2025, pressing force: 100 t, table width: 700 mm, table length: 880 mm, table height: 850 mm, drop-through hole in table: 200 mm, ram adjustment: 85 mm, stroke adjustment: 110 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE Ledpfxovxhprj Amaehk o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 100 Tons Table-Ram Distance 450 Mm Distance Between Walls 960 Mm Ram Adjustment 85 Mm Press Approximate Width 1230 Mm Press Approximate Depth 1650 Mm Press Approximate Height 2500 Mm Table Hole Diameter 200 Mm Table Size 700 / 880 Mm Mold Clamping Housing Diameter 50 Mm Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 110 Mm Stroke Number/Minute 50 Units/min. Engine Power 11 KW Engine Speed 1450 RPM Approximate Weight 7,500 Kg