Used Dws 200 for sale (16,245)

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Rcedpfxjv Tkzme Ahcjf -Hydraulic cylinder: single-acting stroke 200 mm -Type: unfortunately without type designation -Piston rod: Ø 32 mm -Hole: Ø 20 mm / Distance: retracted 335 mm -Dimensions: 390/50/H55 mm -Weight: 3.9 kg

Condition: used, Year of construction: 2017, Technical details: operating pressure: 12 bar container volume: 200 l Total weight, approx.: 220 kg dimensions L x W x H: 1,2 x 1,1 x 1,8 m Rjdpfxovvvrps Ahcocf Mobile pressure blasting pot - Sand blasting system Blasting tank pressure up to 12 bar Test pressure 17.2 bar Ideally equipped with: -with remote control valve -with remote control lever -with electro-pneumatic remote control -with carbide spray nozzle incl. 10 m nozzle hose i.D. *

Condition: not inspected (used), Year of construction: 1995, Connected load 380V 2.2kW Intake nozzle 200 mm mobile Rodpfx Ahjvz Uhyecjcf 2x chip bins á 190l Volume flow 2500 m³/h HxWxD: 2160 x 830 x 1900 mm

Condition: new, Type: S 200 l 2P Complete stainless steel Hopper capacity 200 liter Double working shafts with paddles Rotation of shafts in both directions Protection cover Two motors and two gears, transmission chain Electric power: 1.5 kW + 1.5 kW Voltage: 380 V / 50 Hz Discharging: 2 flaps Installation dimensions of machine in cm: Width: 120 Rcodjhd U Taopfx Ahcef Lenght: 65 Height: 100 Delivery time: after advanced payment, one working day

Condition: good (used), Machine vice, sturdy vice, drill press vice Rjdehinyvjpfx Ahcjcf -Machine vice: rotatable -Clamping jaws 200 x 55 mm -Clamping depth: 200 mm -Dimensions: 510/228/H190 mm -Weight: 64 kg

Condition: ready for operation (used), Schunk Gemotec CLM 200-H100 compact slide SN: MK116609,used, normal traces of use, 100% functional, scope of delivery according to photos Rodpfx Ajmz Ecwjhcscf

Condition: used, Flat pulley, belt pulley, drive pulley, roller pulley -Pulley: flat pulley material cast aluminum Ø 290 mm -Width 200mm -Intake: Ø 60 x 120 mm -Bolt circle: Ø 80 mm M6 -Dimensions: Ø 290 x 200 mm -Weight: 6.3 kg Rcjdpfonch Iujx Ahcjf

Condition: used, Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: SEW-Eurodrive, Gearbox Movigear Type MGFAT2-DSM-DSC-B/IV/WA/PE/A i 55,25 -Speed: 3.6 to 36.2 rpm -Hollow shaft: Ø 30 x 90 mm -Individual components: see photos Redpforqipgjx Ahcecf -Number: 3x gearbox available -Price per piece -Dimensions: 230/170/H365mm -Weight: 16 kg/piece

Condition: ready for operation (used), Heidenhain TTR ERM 200 1024 A02 1R division drum Id. 390 925-02 SN:28933090, used, normal signs of wear, 100% functional, scope of delivery as per photos. Rcjdpfx Asx Er T Tohcef

Condition: ready for operation (used), FC 200 203 500 control board SN:76747, used, minor signs of wear, 100% fully functional, scope of delivery as shown in photos Rcodpfxjx Et R Ho Ahcsf

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, lever shears, sheet metal shears, profile steel shears, hand lever shears Rcedpfxsx Ehlps Ahcsf -Manufacturer: VEB, Hand lever scissors type ScDH 5 -Cutting insert length: 200 mm -Cutting capacity: 5/7 mm -Lift-down device: infinitely adjustable -Dimensions: 470/120/H1270 mm -Weight: 28.1 kg

Condition: excellent (used), Year of construction: 1994, Low-speed machine with hydraulic moving floor. Rotor width: 840 mm. Motor: 18.5 kW. Hopper with lid included. Ready for operation. Only 3400 operating hours. Rodpfx Ahsx Ilp Hocscf

Condition: used, Three-jaw chuck, 3-jaw chuck Rsdpsd I Ucyofx Ahcocf -Chuck size: Ø 200 mm -Throughout: Ø 60 mm -Weight: 14.5 kg

Condition: good (used), three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Rcedpfxod R Exhs Ahcof -Handover: as is -Chuck size: Ø 200 mm -Bolt circle: Ø 134 mm -Weight: 20.7 kg

Condition: used, Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.1 kW -Speed: 1400 rpm Redpscwl A Isfx Ahcscf -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 690/500/H1260 mm -Weight: 148 kg

Year of construction: 2002, condition: excellent (used), Parts in contact with the product are made of stainless steel 1.4571, the rest of the dryer is made of 1.4301. Rcedpsitcu Esfx Ahcof Machine Name: Continuous Horizontal Vacuum Paddler Dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 rpm Material: 1.4301 Driving force: 5,5 kW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Technical documentation: Yes Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used

Condition: good (used), Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection, electronic modules, PLC controller, digital input -Manufacturer: Siemens, Simatic S7 Profisafe electronic module ET 200S Redpfeh Sy U Rox Ahcjcf -Type: 6ES7 138-4FB03-0AB0 -Dimensions: 50/30/H80 mm -Weight: 0.1 kg

Condition: used, Clipping machine Technopack KDCVT 200 Type: KDCVT 200 Rcedpfxoh Tnaqs Ahcsf Dimensions: 100x60x190cm Maximum closing diameter: 120mm Delivery time: 30 working days after advanced payment

Condition: new, Datalogic Matrix 200 213-101 / WVGA-FAR-25P-ES Compact 2D Imager, serial number as shown in the photo, unused, in open original packaging, 100% functional, scope of delivery as shown in the photos. Rcodpoi D Un Hofx Ahcsf

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, load capacity: 200 kg, arm reach: 2,400 mm, controller manufacturer: KUKA, controller model: KRC2 ed05, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR200 COMP Payload: 200 kg Reach in mm : 2400 mm Condition: Used & Tested Year: 2005 (Multiple options available) Included: Manipulator + KRC2 ed05 Cabinet + Teachpendant + All Wire Sets + 6 months of warranty PLC MERKEZI Refurbishment Services Include: • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. Redpfjw Hyhnsx Ahcecf • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs. (Source: Kuka's Website)

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light alloy cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, hydraulic short-stroke cylinders, hydraulic flat cylinders Rcsdpfswxtw Tsx Ahcjf -Manufacturer: FAG, single-acting light alloy cylinder with spring return, stroke 210 mm -Type designation: LZM 25/200 PN500 8607 -Stamp diameter: 63 mm -Lifting capacity: 25 t -Pressure range: max. 500 bar -Dimensions: 140/110/H365 mm -Weight: 12 kg

Condition: good (used), Additional knives will come with machine. Rsdpfjwx N Etjx Ahcscf

Condition: like new (used), Year of construction: 2019, operating hours: 200 h, Technical Data – Solidturn 200/1500 B – Universal Lathe Working Area Distance between centers 1500 mm Max. turning diameter over bed 400 mm Max. turning diameter over carriage 225 mm Max. turning diameter over gap 530 mm X-axis travel 330 mm Z1-axis travel 130 mm Gap length 320 mm Bed width 330 mm Cross slide swivel range 360° Main Spindle Speed range (15) 22 – 2000 rpm Rcodpfx Ahswuvacecjf Spindle bore 85 mm Spindle mount Camlock D1-6 Spindle taper MT 5 Feed Feed X-axis 0.036 – 2.019 mm/rev Feed Z-axis 0.072 – 4.036 mm/rev Thread Cutting Metric thread cutting 0.5 – 28 mm Diametral thread cutting 8 – 56 mm Module thread cutting 0.5 – 3.5 mm Whitworth thread cutting 1 – 56 TPI Tailstock Tailstock quill diameter 65 mm Tailstock taper MT 5 Tailstock quill stroke 120 mm Tailstock lateral adjustment ± 5 Drive Power Main spindle motor power 7.5 kW Supply voltage 400 V Dimensions and Weights Dimensions 2920 x 1150 x 1800 mm Weight 2240 kg

Condition: new, Pleiger hydraulic motor MO 300/200 Rcsdpfox Uq Dcox Ahcjf KM No. 6257639

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 2: KSB Blockp Etabloc 65-200/3002 GN10 Rodpfx Aoxbhtrohcecf IEC standard motor KSB 30 kW 2900 rpm Part no.: 48875108 Single-stage volute casing pump with nominal ratings according to EN 733, equipped with a KSB IEC three-phase motor, protection class IP 55, insulation class F, flange-mounted to form a monobloc unit. Pump shaft is rigidly connected to the motor shaft. Fitted with an uncooled mechanical seal, corrosion-resistant shaft sleeve, and replaceable wear rings. Drive lantern made of grey cast iron, with contact protection according to EN 294. Mounting via support foot up to motor size 112, and via motor foot from motor size 132 onwards. Volute casing: Grey cast iron Impeller: Grey cast iron Shaft, pump: Tempered steel