Used Dws 200 for sale (16,251)

Condition: new, Year of construction: 2026, Cut-off and miter saw, type: ZS 200 N - 5 KW motor with machine stand, Machine operated via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade arbor bore 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm Pedpfsk H Ic Uox Ahcsra The saw can be tilted to an acute angle of up to approx. 25 degrees on one side and can be tilted to the left up to 30 degrees. Tungsten carbide circular saw blade 520x4.0/2.8 x 50 mm, 60 teeth, negative bevel, for wood RLH-ST60, 6.0 m measuring length, mounting side: Left Length stop / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital measuring display, stop slide pneumatically releases, stop flap folds back, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connecting piece: overall length: 6.7 m Additional cost for digital electronic display unit type: FIAMA EP6 for 230 volt mains operation, with electronic on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60, 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connecting piece Location: In stock, 54634 Bitburg - immediately available - Image: similar. Machine is still in original packaging.

Condition: used, Year of construction: 1984, machine/vehicle number: 106, 4-Spindel-Papierbohrmaschine - 4-head spindle paper drilling Josef Foellmer IRAM 200Year ca. 1984 - Serial-No. 106 Drilling area 3 - 10 mm Drilling distance variabel 36 - 430 mm Online-Video-Inspection by Skype-Video Podpfx Ahjh Axadocora We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Neue Nummerierwerke - New Numbering units Zeisser 100/200 ZAVSome Numbering heads ZEISSER - NEW Prodpfeh Ax Hxex Ahcoa Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1992, Anleger - CMC Einsteckmaschine - Feeder - CMC Inserting machine RITMICA Universal H-200Year 1992 - Serial-No. H-200 Pedpfoh Ax Snex Ahcsra 2 Feeder for CMC Inserting Machine Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 350 mm, turning length: 300 mm, turning diameter: 280 mm, spindle bore: 53 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 330 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,550 mm, total length: 2,050 mm, total width: 1,600 mm, overall weight: 3,200 kg, bar passage: 45 mm, chuck outer diameter: 203 mm, bar diameter (max.): 45 mm, controller model: Mitsubishi M50, Doosan Puma 240C CNC Lathe Available for sale is a production-ready Doosan Puma CNC Lathe. This machine is a highly reliable shop workhorse featuring a solid, single-piece cast iron bed with traditional box guideways for heavy-duty cutting and superior vibration dampening. Equipped with the factory Big-Bore package, this lathe pairs a large chuck capability with an expanded through-hole bar capacity, making it an ideal choice for high-mix job shops and heavy-duty turning applications. Key Machine Characteristics Pjdpfx Ahjzluudscera * Chassis Construction: Engineered with wide box guideways that offer exceptional tool life and heavy dampening for aggressive roughing cuts on tough alloys. * Bar & Chuck Capacity: Upgraded spindle configuration that allows the machine to process significantly larger raw bar stock than standard models in its class. * Compact Footprint: Delivers maximum frame rigidity and heavy cutting power without taking up excessive shop floor space. * Control System: Powered by a highly dependable and industry-standard Fanuc operating platform known for its stability and ease of programming. * Versatility: Perfectly balanced for short-to-medium length workpieces requiring high torque and consistent dimensional accuracy.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Bandsaw grinding machine Risstaler riv Rivo 200 GA Year of manufacture 1984 Predpfowd N Daex Ahcoa Various tooth shapes available Operating instructions included Feed rate 30 or 60 teeth per minute

Condition: good (used), Load capacity: 200 kg Pedpfx Ahjum Slvocsra Tipping height: 2200 mm Container size: 800x600x550mm

Condition: used, Electrofusion Welding Machine, Electrofitting Welder, Welding Unit, Used Machine Manufacturer: Geberit Model: ESG 40/200 Overall Dimensions: Width: 220 mm Depth: 170 mm Prjdpfxjznk Nvj Ahcea Height: 170 mm

Condition: new, Year of construction: 2026, machine/vehicle number: FGWPEP48ERPC03709, fuel type: diesel, power: 160 kW (217.54 HP), motor manufacturer: Perkins 1106A-70TAG3, General information Field of application: Construction Weights Empty weight: 1.548 kg Functional Generator capacity: 200 kVA Dimensions of cargo space: 251 x 101 x 164 cm CE mark: yes Other information Fuel consumption: 30,7 L/Hour at 75% Load Prime Generator: FG Wilson FGL30120 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 394 l Production country: CN Additional information Please contact Team DPX for more information Pjdpowafzmefx Ahcsra = Additional options and accessories = - Battery - Control Panel - Tank

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 2,610 h, load capacity: 2,000 kg, lifting height: 2,100 mm, fuel type: electric, mast type: simplex, construction height: 1,548 mm, fork length: 1,150 mm, empty load weight: 900 kg, total length: 753 mm, drive type: Elektro, construction width: 770 mm, High-lift pallet truck Prodpfx Aozpb Npehcoa Load center: 600 Mast type: Standard Technical condition: good Front tire type: Polyurethane Front tire condition: 60 - 80% Rear tire type: Polyurethane Rear tire condition: 60 - 80% Battery voltage: 24V Battery capacity: 225Ah Battery year of manufacture: 2020 Description: Thorough equipment cleaning, new black paint, polishing of the orange covers, new maintenance, new inspection according to FEM Impulse control, initial lift, CE certificate.

Condition: used, functionality: unexamined, Rated voltage 380V, 15A Grinding motor 5.5 kW Feed motor 0.37 kW Grinding belt width 200 mm Grinding belt length 1800 mm Pneumatic connection 6 bar Feed speeds 6 / 11 / 16 m/min Electric table height adjustment Belt air blast Prjdpoznv Uwefx Ahcea Dust extraction connection 140 mm

Condition: excellent (used), functionality: fully functional, Fork length: approx. 115 cm, max. load capacity: approx. 1000 kg, weight without battery: approx. 955 kg, year of manufacture: 2017, known fault: discharged battery and worn drive wheel. BT SPE 200 DN high-lift pallet truck. Prjdpfx Aoyu Tbpehcoa

Condition: excellent (used), Year of construction: 2004, Weinig Dimter Opticut 200 Classic optimizer - after the technical review - year of production 2004 - declaration of conformity, DTR - German production TECHNICAL PARAMETERS: min./max. entry length of the element 800/3500 mm min./max. entry width of the element 80/200 mm min./max. element input thickness 12/80 mm type of wood hard / soft dash cutting wood classification max. feed speed 120 m / min acceleration 5 m / s saw blade diameter fi 500 mm saw hole diameter 30 mm saw spindle speed 4600 U / min duration of 1 cycle 0.7 - 1.2 sec a powered conveyor at the entrance and a marking station with side tables for two markers conveyor belt total power 15 kW length measurement - fluorescence camera for 3 qualities Prjdogz Tbdepfx Ahcea receiving station - conveyor belt full optimization total length 8300 mm stub diameter 80 and 120 mm OptiCom Direct control power supply 400 V / 50 Hz

Condition: used, Hydraulic lifting platform for operator, brand Sordella Spa, used. Max load Kg. 200 Maximum platform height 13 m Pedpfjzn Hr Tex Ahcjra Maximum working height m. 14.50

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, FTC-200 Tracked Cone Crusher; It is produced in the form of feeding bunker, generator, cone crusher and stock belt.FTC-200 Tracked Cone Crusher, which is moved with a remote control on a steel track, successfully completes all commands by moving on its tracks in all difficult climatic conditions and rough terrain.FTC-200 Crawler Cone Crusher, which is delicately designed and meticulously manufactured for crushing stone, is the leading crawler crusher plant in the industry with its weight of 41,000 Kg and a crushing capacity of 100-180 T/H per hour. Eliminates Infrastructure Requirement FTC-200 Tracked Cone Crusher does not require an extra infrastructure as a production method, it can be moved by remote control and adapts to all difficult terrain conditions. Belt Feeder The Belt Feeder is the system in charge of quickly sending the loaded products to the crusher for the crushing process.It has a belt feeder motor protection system that gains mobility thanks to 2 motors. Thanks to this system, malfunctions that may occur as a result of overheating are prevented.The working intensity of the Belt Feeder and the crusher is coupled with the automation system. This feature works in two steps. Step 1: If the density of the crushed product in the crusher is high, the amperage of the crusher rises and this rise is detected by the automation system, the bunker transfer stops.It prevents product accumulation in the crusher feeding chute. This feature prevents the crusher from being worn out. Step 2: If the density of the crushed product in the crusher is low, the amperage of the crusher decreases. This decrease is detected by the automation system and bunker transfer increases. The feeding hopper delivers the products to the crusher faster. This feature keeps the production capacity at the maximum level. Cone Crusher Cone crushers are the crusher of FTC-200 Tracked Crushing Plant that can easily crush hard stones.The power transferred from the engine to the gear shaft is sent to the hub with gears.Thanks to the core and concave inside the crusher, it crushes the stones and breaks them into pieces. Stock Belts With its foldable structure, it minimizes the dimensions of the machine it is on. Optionally, the number and length of tapes can be increased upon the request of the user.10 mm EP 125 4-ply Band elastics, moving on 4mm st 37 Twisted Sheet, perfectly transport the aggregate coming out of the screen to the area desired by the user in the most efficient way.Belt Elastics, which are produced resistant to wear, will never let you down and offer many years of service life. Pjdpfxozibahe Ahcera Pallet System The basic element that enables the movement of the FTC-200 Tracked Cone Crusher is the pallet system.Pallets carry the entire weight of the crusher. FABO, which does not ignore the importance of the pallet system on the crushing plant, has carried out various R&D studies and has revealed the pallet system that provides maximum durability, low maintenance cost and long-term service to its user in accordance with A1 Quality CE standards.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 330 h, load capacity: 2,000 kg, lifting height: 1,600 mm, free lift: 172 mm, fuel type: electric, mast type: simplex, construction height: 1,335 mm, fork length: 1,200 mm, empty load weight: 1,350 kg, total length: 1,600 mm, drive type: Elektro, construction width: 790 mm, High lift truck Load center: 600 Mast type: Standard Technical condition: very good Front tires Type: Polyurethane Front tires Condition: 100% Rear tires Type: Polyurethane Rear tires Condition: 100% Battery Volt: 24V Battery Ah: 300Ah Psdpfx Ahoqynq Rocjra Battery year of manufacture: 2022 Description: Used unit reconditioned by Toyota incl. new inspection and new acceptance according to FEM (ex UVV). With power steering. Pulse control, initial lift, CE certificate,

Year of construction: 1987, condition: good (used), Technical data: X-axis travel: 11,500 mm Y-axis travel: 4,500 mm Spindle diameter: 200 mm Pjdpfx Aohx Eukshcora

Condition: used, mileage: 31,550 km, power: 62 kW (84.30 HP), first registration: 03/2021, fuel type: diesel, color: white, tire size: 225/70 R15, driver cabin: other, gearing type: other, emission class: euro6, Year of construction: 2021, number of seats: 2, Equipment: air conditioning, onboard computer, power assisted steering, Other: Pjdpfx Ahozcfzdjcsra * Trade-in and purchase of vehicles and machines possible. * Sales price excluding transportation and transfer. * No liability for printing & typing errors. * Errors, changes and prior sale reserved. * Offer subject to change. * Photos may differ. Price applies to existing condition. * All information without guarantee. - .

Condition: like new (used), 200 m² Nedcon storage platform, approx. 29.5 m x 6.7 m Pedpfx Asxgq Snehcsra 🧰 Product Features • Column grid: 6.3 m x 5.9 cm • Dimensions: approx. 29.5 m x 6.7 m • Condition: Used, top condition, like new, see pictures • Height: Top edge of the platform 370 cm • Load capacity: 500 kg/m² • Floor covering: 38 mm thick compressed chipboard, white underside, coated top Offer includes: 68 pcs. Sigma profiles 12 pcs. Uprights 63 pcs. 38 mm thick compressed chipboard, coated on both sides, 2.4 m x 1.45 m 4 pcs. Cross braces Assembly material (screws, etc.) Guardrails, stairs, transfer stations, transfer docks, etc. can be manufactured at an additional cost. 💰 Price € 19,900 net, excl. VAT. • Quantity discount: upon request • Shipping costs: available throughout Europe upon request • Delivery time: Available immediately • Inspection and collection: possible at any time by arrangement Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top used & new storage technology & heavy-duty racking Description: Are you looking for high-quality storage racking for purchase? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • Weekly 30–50 semi-trailer trucks of goods turnover for maximum selection 📦 OUR RANGE (BUY AFFORDABLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearing orders, we offer a complete all-round package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete stock, including thorough clearing. 2. Commission auction: Conducting auctions on behalf of clients. Our full service provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and thorough handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, machine/vehicle number: 007601, X axis working area: 4320 mm Y axis working area: 2245 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16 Prodpfou N Skfjx Ahcoa Total number of tool changer positions: 8

Condition: good (used), Roller conveyor, conveyor belt, roller track, saw roller conveyor Prjdpezq Aaxofx Ahcea -Roller conveyor: non-powered, length 3.0 m on a solid, height-adjustable base frame -Roller width: 200 mm -Roller diameter: 50 mm -Roller spacing: 140 mm -Transport dimensions: 3000/310/H890 mm -Weight: 44 kg

Condition: used, Year of construction: 2007, No. 3177 Automatic optimizing cross-cut saw WEINIG Dimter OptiCut 200 - 1 Used, year of construction 2007, machine already dismantled Pedpfxsu Atmuj Ahcora For cutting timber to fixed lengths Timber dimensions to be processed: Minimum / maximum input length: 3000 - 5000 mm Minimum / maximum input width: 80 - 200 mm Minimum / maximum input thickness: 38 - 80 mm Maximum timber cross-section: 200 x 50 mm Minimum / maximum finished timber length: 700 - 1000 mm Average number of cuts per board: 5 Types of wood: softwood or hardwood System performance: Maximum feed speed: 180 m/min, continuously adjustable Time per cutting cycle, including braking: 0.7 - 1.2 seconds Overview of components: Item 1: Infeed conveyor belt upstream of the saw Length: 1.5 m, coupled to the saw’s feed motor Item 2: Automatic cross-cut saw OptiCut 200 - 1, left-hand version With integrated length-measuring wheel and integrated blow-out device for waste pieces Graphics-capable operator terminal with 1/4 VGA display, numerical keypad and function keys, including the OptiCom software package for system control The machine is fed from the left-hand side Item 3: Outfeed conveyor belt / sorting station With drive unit, without ejectors Conveyor length: approx. 1.5 m The infeed table was not used by the previous owner. Two feed rollers were installed for feeding the material. The conveyor table is included, only the rubber conveyor belt is missing. Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: refurbished (used), Year of construction: 1990, Drum chipper / chipping machine / wood shredder fully reconditioned (workshop-reconditioned) Make: Rudnick & Enners Year of manufacture: 1990 Rudnick & Enners drum chipper, type TH-200/650/3 workshop-refurbished (fully reconditioned) with new bearings (spherical roller bearings) and tested rotor New blades and counter-blades Pjdpfszq Sqgjx Ahcsra Feed width/height: 650 x 200 mm Rotor diameter: 600 mm Screen mesh size: 50 x 50 mm Drive power: 75.0 kW Feed motors: 2 x 3.0 kW Weight: approx. 3,500 kg Machine colour: RAL 6011 Reseda green Without electrical installation and without control cabinet

Year of construction: 2017, condition: new, Size: 040-200 Impeller diameter: 190 mm Prjdsh I D Dyopfx Ahcoa Q: 32 m3/h H: 51,00 m

Condition: used, Cutter Rex 2000 for sale. Please let me know if you are interested. Prodpfx Ahozn Rf Rscsa