Used Dust Filter for sale (11,082)

Condition: good (used), Year of construction: 2020, functionality: fully functional, cooling capacity: 890 kW (1,210.06 HP), type of input current: three-phase, type of cooling: air, overall weight: 7,321 kg, input voltage: 400 V, total width: 2,260 mm, total length: 7,200 mm, total height: 2,300 mm, warranty duration: 6 months, Aircooled chiller CARRIER 30XB 0900 0041 890 kW Cooling capacity: 890 kW / 253.1 tons (12/7 — 35°C) Year of manufacture: 2020 Options: Recuperation. Economizer. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 2 pcs. Carlyle 06TUA483SW1E (screw) Type of refrigerant: R134а Number of fans: 14 pcs. (Frequency inverter) Dimensions: 7.2x2.26x2.3 m Weight: 7321 kg Working hours: 6088/6061 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Hedpfozxbfiox Ahgst The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 2000, condition: ready for operation (used), Travel path X/Y/Z: 1670mm/800mm/900mm, Speed: 4000rpm, Tool positions: 16, Tool holder: SK40, Table dimensions X/Y: 2000mm/900mm, Weight: approx. 4500kg, Operating hours: approx. 9680h. According to the error message, the standstill monitoring of the Z-axis is defective. Documentation available. An on-site inspection is possible. Hodpeymfdaefx Ahget

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 300 kg, construction height: 1,950 mm, Technical condition: very good Hodpsymt Hcefx Ahget

Year of construction: 1997, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH AUTOMATIC A/B-AXIS HEAD LONGITUDINAL TRAVEL: 4000 mm TRANSVERSAL TRAVEL: 1200 mm VERTICAL TRAVEL: 2000 mm RAPID FEEDS L-T-V: 15 m/min TABLE SIZE: 5000 x 2000 mm SPINDLE: 4000 rpm; 27 kW; 1200 Nm HEAD: A/B AXIS AUTOMATIC ; A 2,5°- B 2,5° ; ISO 50 ; 4000 rpm TOOL MAGAZINE: CHAIN-TYPE ; 30 POS CONTROL UNIT: SELCA S3045 WEIGHT: 25500 Kg ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL Hsdpfx Ash Stzkohgot NOTE: EXTENSION 400mm -ISO50 -6.500rpm; AUTOMATIC HEAD EXCHANGE; PERIMETER GUARDING

Condition: used, Beutelfilter für Beutel Typ #2 Hedpfx Ahjxyt Hnsgst Material: Edelstahl Typ 304 Druck: 8 Bar

Condition: used, Dust cyclone with rotary valve, dust cyclone 14,400 m³/h,Cyclone system, used machine Year: 2013 Dust Cyclone: HLZ-J 1600 Airflow rate: 14,000 Bm³/h Inlet (suction side): 400 mm Height: 5,853 mm Diameter: 1,695 mm Centrifugal Fan: Ventilatorenfabrik Oelde GmbH Type: HRV 56N-400/M GL360 Hedpfx Ajx U Amijhgst Airflow rate: 14,400 m³/h Rated power: 22 kW Rotary Valve: Ventilatorenfabrik Oelde GmbH Type: MS 050-390 A Capacity per revolution: 58 liters Rotor with 10 fixed rotor blades (cells)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2007.10.191, grinding width: 1,350 mm, grinding belt length: 4,800 mm, workpiece height (max.): 150 mm, grinding belt width: 1,400 mm, Sanding Machine + Dust Extraction Unit TECHNICAL DETAILS Sanding width: 1,350 mm Working height: 880 mm Workpiece thickness: 3 - 150 mm Transport bed: continuous conveyor belt Transport bed drive: 4.0 kW / frequency converter 7.5 kW Feed speed: 3 – 15 m/min Drive, workpiece suction clamping system: 7.5 kW Units: 3 x cross, 1 x longitudinal, 1 x brush Cross and longitudinal sanding units Cross sanding unit – sanding belt dimensions: 4,800 x 150 mm Belt speed: 2–20 m/s Drive power per cross sanding unit: 15 kW Pressure lamella belt dimensions cross sanding: 4,350 x 140 mm Longitudinal sanding unit – sanding belt dimensions: 2,620 x 1,400 mm Belt speed longitudinal sanding: 1.8 – 16 m/s Drive power longitudinal sanding: 15 kW Pressure lamella belt dimensions longitudinal sanding: 1,900 x 1,380 mm Brushing unit Brush roller diameter: 120 mm Drive power: 0.75 kW Air requirement Air requirement, cross sanding units: 91.5 m³/min Air requirement, longitudinal sanding unit: 30.5 m³/min Air requirement, brushing system: 18.0 m³/min Air requirement, conveyor belt extraction: 13.5 m³/min Air exhaust, workpiece suction clamping system: 40.0 m³/min Total air requirement: 193.5 m³/min Total compressed air consumption: 115 m³/h MACHINE DETAILS Total connected load: approx. 80 kW Operating voltage: 400 V Frequency: 50 Hz Main machine dimensions Dimensions (L x W x H): 2,900 x 2,300 x 2,200 mm Weight: approx. 7,000 kg Dust Extraction Unit EA 8 – Machine No.: 2007.10.192 Sanding width: 1,350 mm Working height: 880 – 920 mm Workpiece thickness: 3–150 mm Required air speed: 20 m/s Air requirement: 30.5 m³/min Transport bed drive: 1.1 kW / frequency converter 2.2 kW / 0.75 kW Feed speed: 3–15 m/min Fan drive: 5.5 kW Drive, height adjustment: 0.18 kW Power connection: 7.0 kW Dimensions (L x W x H): 1,100 x 2,200 x 2,200 mm Hedpfx Ajyg Exqohgst Weight: 1,900 kg EQUIPMENT - Operator terminal - Dust extraction unit EA 8 - Workpiece suction clamping system - Several cross and longitudinal sanding units - Brushing unit

Condition: good (used), Camfil Filter Unit CS 610 for Industrial Extraction Systems Hedsyrnfwopfx Ahgst Manufacturer: Camfil KG Model: CS 610 painted Type: Filter unit for industrial extraction systems Article number: 518110 Serial number: 000442739182 Quantity: 2

Year of construction: 1989, condition: used, Additional title: Filtrox ZHF Hjdpfx Ajw Tmtcjhgot Filter capacity: 200 hl/h Volume: 16 hl Operating pressure: 6 bar Operating temperature: 100 °C Systemic volume: 1620 Liter Width: 1,2 m Height: 2,85 m Weight: 2500 kg Operation / Control: Manual system, mainly with pneumatic valves, operation take splace on the control cabinet panel Material: stainless steel Features: Filter vessel with horizontal filter elements, stack dosing container with agitator, CIP system for regeneration, control cabinet with control panel, pumps, fittings and sensors

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 295.6 kW (401.90 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,453 kg, input voltage: 400 V, total width: 1,000 mm, total length: 2,200 mm, total height: 1,880 mm, warranty duration: 12 months, Watercooled chiller PANASONIC ECOi P WQE1004CA 295.6 kW Cooling capacity: 295.6 kW / 84.05 tons (12/7 — 35°C) Year of manufacture: 2023 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Bitzer GSD80295VAB4-2 (scroll) Type of refrigerant: R410a Dimensions: 2.2x1x1.88 m. Weight: 1453 kg. Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available Hedpfxjwp Duqs Ahgjt - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, System: Chamber filter press mobile, used Type: Netzsch Application area: sludge dewatering Hjdpfx Ahjwqydweget Figur-No.: 012.73/319.73/665.73/TH Commission No.: 040.417 Filter plate size: 1200x1200 Number of plates: approx. 100 Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 250 m2 Press volume: approx. 3540 dm3 Filter pressure: approx. 15 bar Pump 1: SEEPEX Type BN 35-12 Commission number 266222 Pump 2 SEEPEX Type BN 10-24 Commission number 266223 Pump 3 SEEPEX Type BN 75-6LT Commission number 266224 Washing system No Conveyor technology yes Polymer system yes Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: used, System Chamber filter press mobile, used Type Netzsch Application area sludge dewatering Commission No. 040.087 Filter plate size 1200x1200 Number of plates approx. 95 Hedpswqyd Defx Ahget Filter plates PP Filter cloths optionally available in accordance with the medium Filter area approx. 230 m2 Press volume approx. 3400 dm3 Filter pressure approx. 15 bar Year of construction 1993 Length approx. 16 m Width approx. 3.25 m Height approx. 2.97 m Application sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: used, System: Chamber filter press, used Type: REWA Application area: sludge dewatering Design: side rail Filter plate size: 470x470 Number of plates: 27 + head and end plate Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 17 m2 Press volume: approx. 90 dm3 Hodpfswqyfhex Ahgot Filter pressure: approx. 15 bar Pump technology: optional Washing system: No Miscellaneous: LxWxH 3000x550x1200 mm Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: like new (used), System: Chamber filter press, laboratory press Application area: Chamber filter press, pilot plant Design: side-bar guided Type: REWA Filter plate size: 150x150 mm Number of plates: 4 + 1/2 head and end plate Filter plates: PP Cake thickness: 15 mm Filter cloths: optionally available tailored to the medium Discharge: open Filter area: approx. 0.2 m² Press content: approx. dm³ Plate transport: manual Pump technology: included - optional Purchase or rental: Inspection of the systems by appointment at our facility. Condition: Demonstration unit, as new Weight: approx. 70 kg Length: approx. 70 cm Width: approx. 40 cm Height: with frame + pump approx. 85 cm Miscellaneous: Would you like to rent, lease, or buy this system? Contact us, we are happy to be at your disposal. Hjdjwqzibjpfx Ahget

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Hodpfxew Ivrqj Ahget Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Condition: used, Year of construction: 1984, Name: Used filter press Manufacturer: Netzsch Hjdpfjw Rb Ehsx Ahgst Type: 800/32 Year built: 1984 Construction form: Side beam press Filter pressure: 15 bar Press content: Approx. 480 Liters Cycle: Closed Filter area: approx. 34 m2 Plate size: 800 x 800 mm Number plates: 32 Plate material: Polypropylene Plate transport: Automatic Filter cloth washer: No Plate pack length: approx. 2000 mm Cake thickness: 30 mm Closing pressure: 350 bar Dimensions: L 4.500 x W 1.700 x H 2.000 mm Empty weight: approx. 5000 kg Accessories: A control cabinet, a hydraulic system, a light curtain & drip trays. Condition: Second hand Price: On demand

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. Hsdpsv Sa I Tefx Ahget While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Hodpov S Dihofx Ahgot After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. If desired, the 3rd tank can be added and another function is added after rinsing. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Year of construction: 2025, condition: new, DOLFİN- VDL series Drum (Spiral) parts washing machines are used particularly for the purpose of cleaning small parts that are manufactured in large quantities and in bulk. The materials that are poured from the inlet part of the spiral drum in the device are directed towards the outlet part of the drum with the spirals inside the drum. While the drum moves in its own axis according to the set rotation speed, it subjects its parts to, respectively, washing (degreasing), rinsing, passivation and drying processes (varies per the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively within a single device. Full penetration is ensured by pressurized spraying and dipping effects in each section. It is a very functional model of us that is used particularly for washing the bolts, nuts, washers, or such small parts, fittings, nipples, couplers and fittings that are processed in CNC and automated machines in high quantities. Regardless of the metal type of the parts to be washed, they are fully compatible with steel, brass, aluminum copper or stainless steel materials. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device operates continuously in accordance with the values of the washing parameters that have been entered from the control panel before operation. Parts that come out of production in bulk can be loaded into our device in 3 different manners. 1. With Vibrating Loading Chamber, 2.With Lift Conveyor, 3. By coupling to our Customer's existing system, Do not hesitate to contact for more information. Hsdpjv S Dk Ssfx Ahgot We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Hjdpfx Ahoxf Up Ieget

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, type of input current: AC, pressure: 11 bar, operating temperature: 800 °C, temperature: 800 °C, We have one desulphurization modul for sale. It is designe for handling of 150 kg natural gas per hour. New price EUR 416.666,- It will be sold for 10% of new price or highest bid. Hedpfexhfidsx Ahgst

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Hsdpfx Ajxnqaushgst Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 2023, Equipment: CE marking, Nederman dust extraction system / silo dust collector with control unit and compressed air treatment Condition: very good, used for only 2 years from commissioning in 2023 to 2025, then dismantled due to factory closure. Application: Extraction and filtration of dust particles in silos and pneumatic conveying systems. Design: compact steel construction with integrated filter module. Filter cleaning: compressed air cleaning. Mounting type: roof mounting on silo. Application: industrial dust extraction, bulk solids handling, environmental technology. Filter type: cassette dust collector Type: MEP-2-6 Year of manufacture: 2023 Fan manufacturer: Nederman Type: FMZ 620 Year of manufacture: 2023 Power: 3 kW EX-protected Control unit manufacturer: Nederman Type: DFC-08M Article number: 5512680 Year of manufacture: 2023 Pressure vessel manufacturer: RECO Gesellschaft für Industriefilterregelung mbH Type: ST148-DN25-2V-8P Year of manufacture: 2023 Serial number: FA1049979-003 Maximum permissible pressure: 7 bar Permissible temperature: -20°C to 85°C Volume: 7.3 L Fluid group: 2 Pressure test date: 2023-05 Control cabinet: Rittal AE 1010.600 Year of manufacture: 2023 Compressed air treatment: Camozzi MC202-D00 Maximum inlet pressure: 16 bar Outlet pressure: 0.5–10 bar Maximum temperature: 50°C Hjdpfx Aoyxvpfohgjt Electrical components: ABB control / connection housing Design: dust extraction system for silo applications with integrated filter unit and fan. Accessories / Scope of supply: Electrical control cabinet with control unit Compressed air treatment unit with pressure gauge Pressure vessel for pulse cleaning Fan with motor Pipe connection with weather protection grille Wiring and pneumatic lines Available quantity: 2 units Location: Kusel, Germany

Condition: new, Code: N0235 Brand: CASADEI INDUSTRIA Model: E 350 PM Hodoyvt Exopfx Ahget Automatic edge bander with hot melt (EVA) glue pot, chain panel feeding and pre-milling Maximum finishing quality Chain feeding system Pre-milling (E350PM) 3 free spaces for finishing units High performance 7 m/min feed speed 45 mm panel height 2 mm edge coils Minimum space occupied 2,30 m length Easy to use Unit settings with a piece of edge Easy and intuitive use of machine 3 position infeed fence 0-1-2 mm (according to edge thickness) Chain panel feeding Firm grip of panel guaranteed by special non-slip rubber on the pads. Linear feeding ensured by double sliding tracks with a special geometric profile accurately machined with precision to a hundredth of a millimetre. Long lasting monolithic frame fully processed only in one cycle on a CNC machining centre. Pressure bar with locking levers Top pressure bar with a double row of rubber wheels mounted on bearings, with locking levers and position indicator Pre-milling INVISIBLE GLUEING LINE DIAMOND tools Ø= 60mm H= 54mm HF motors 200 Hz – 12.000 rpm – 0.75 kW (each) Dedicated suction system and blower for panel cleaning before glueing Glueing unit PERFECT GLUEING, QUICK AND PRACTICAL SET-UPS 6 heating elements to guarantee uniform glue temperature. Motorized glue spreading roller with an internal electrical heating element. Inferior Teflon-coated glue pot to permit complete and rapid cleaning. Pneumatic shear, pressure rollers, edge feeding system DETAILS THAT MAKE THE DIFFERENCE Edge feeding synchronized with panel being processed Oscillatory movement of the cutting shear unit to guarantee perfect glueing Quick and precise positioning of the pressure rollers. The system “reads” the edge thickness, making mistakes impossible! Trimming cut-off PERFORMANCE AND VERSATILITY End trims front and rear excess edge Working cycle controlled by PLC Exclusion from control panel (PLC) Flush trimming unit Flush trimming unit with vertical disc copiers as standard Possibility of processing for edges from 0.4-2 mm Anti-adherence / release agent spraying unit (Opt.) INSTANT PERFECT CLEANING Spray function controlled by PLC 2 sprayers (lower and upper) and liquid tank Infrared lamp (Opt.) TO GUARANTEE THE BEST GLUEING CONDITION Creates the best conditions for perfect glueing Heats panels and removes all traces of dampness.

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Type: MS9-LFR-3/4-D7-EUM-AG-BAR-AS 562531 Hjdpfsx Ryhiox Ahget -Quantity: 1x filter control valve available -Dimensions: 440/115/H205 mm -Weight: 3 kg