Used Dry Cooler for sale (3,841)

Condition: refurbished (used), Dry cleaner/ Friction cleaner Isdpfx Ajzmda Sja Eeti with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Itjdpfx Aaozmc Ris Eei Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw

Condition: used, Dry cleaner/ Friction cleaner with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness Itsdpfx Aaszmc Rcs Eoi

Condition: used, Type ICS/C 1.6-838-2x8/115 Model: North - West spiral belt with 2 x 8 tiers nett belt width ± 830 mm product height: max. ± 150 mm Capacity: ± 1.000 kg/hr at 90min Siemens control Belt washing and drying system Additional in- and out-feed conveyor belts: 2-track Dimensions (l x w x h) : ± 10.300 x 4.660 x 2.780 mm Itsdpfozl S Eyex Aa Eei yoc 2011 3 x 400V, 50 Hz, 160A

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Itjdpfx Aey Tiaaja Esi Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026.

Condition: new, Year of construction: 2025, RST-LC1500 Isdjw Ix Dpjpfx Aa Eeti Advantages of the 2D Ultra-Wide Laser Cleaning Machine: A: 600–800 mm wide cleaning with ultra-wide coverage. B: Equipped with imported high-performance SOC controller. C: Various selectable 2D cleaning patterns; 14 languages available. D: Complies with European safety standards; triple safety mechanisms. E: Equipped with multiple parameter databases tailored to various operating conditions. F: High-protection safety design. G: Easy maintenance and long-term stable operation. Machine Technical Specifications: Power supply 220V 50Hz/60Hz Output power ≤5.5 kW Operating temperature 10–40°C Cleaning area Cleaning width ≤ 800 mm Cooling method Air cooled Focal length 500/800/1000 mm Weight of laser cleaning head 900 g Laser safety class Class 4 Machine dimensions 640 × 330 × 620 mm Machine weight 46 kg Packaging dimensions 850 × 650 × 900 mm Package weight 88 kg Laser Generator Specifications: Parameter name Specification Laser generator model MFSC-1500M Power adjustment range 10%–100% Laser wavelength 1080 nm Modulation frequency 1–5000 Hz Output power instability ±1.5% Optical fiber cable length 10 m Machine Configuration: Component name Brand Description Machine body DPL Professional cleaning cabinet Laser generator MAX MFSC-1500M Laser head Hydraulic / Brand 2D Super Wide Angle Chiller system Bingyue 1500W-S Price: RST-LC 1500W (230V).....€9,500 Warranty: Two-year warranty on the laser source, One-year warranty on other machine components. No warranty on consumable parts. OPTION: TERMS AND CONDITIONS Training and Installation: 1 day €600 (incl. arrival and departure) Transport Costs: Air freight: €1,200 / Sea freight: €650 Delivery: 2–3 working weeks after payment receipt for air freight 5–6 weeks by sea freight Payment: 100% due upon order and before shipping (air cargo or by sea)

Condition: used, Die Schmedt PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  The Schmedt PRÄDRY is an extendable dryer for perfect-bound book blocks. Infrarot-Trockengerät / Infrared drying device Schmedt PräDry HHS 12 Die PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  Ein dreistufiger Infrarotstrahler (650, 850 und 1.500 Watt) sorgt für eine  schonende und schnelle Trocknung.  Iedpsxp H S Aefx Aa Ejti Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2004, Equipment: type plate available, A complete drying unit MOTAN - LUXOR 1200 A (Line C) is for sale consisting of: 1x crystallizer: hopper 1200 PET A (1.2m³) including agitator + heating unit ETA Box including air filter 1x dryer: hopper 3600 PET (3.3m³) including heating unit ETA Box -1400 1x dry air generator 1200 - control unit including air filter 2x conveyor device HLX-30-1 1x coupling station 2x air washer 1x conveyor fan RIETSCHLE including MOTAN central filter F30 System features: - Capacity UP TO 20t/day - Dry air volume 1200m3/h - Dew point control - 2 cartridge dryers for residual moisture up to 0.003% - Technical documentation The system is 2x available Subject to prior sale Please send inquiries by email only Iedpfxjuakr Ho Aa Eeti Note: The machine is still installed and can be inspected on site. The buyer must remove it himself and organize shipping. This is not part of the offer price.

Condition: used, The convenient Varioflex shelving trolley is designed for flexible and gentle unloading of painted workpieces. In addition, they enable its 4 swivel castors also facilitate the transport of the Workpieces. Its sturdy tubular frame construction can be Adjustable from 200 to 2000 mm. With 17 inner and 17 outer support tubes each per side, the trolley can carry loads of up to 400 kg at to support an evenly distributed load. The plug-in inner and outer support tubes allow can be removed if required and can be fitted at the rear be reused. When not in use, the shelving trolley can be stored to save space Put together. Optional accessories Itodpfxozk Npaj Aa Eji – Plastic-coated support tubes – Additional rakes Technical specifications: Length: 200–2,000 mm Depth: 870–1,180 mm Height: 1855 mm Support tube length: 650 mm – extended to: 1,150 mm Clearance between pipes: 70 mm Load capacity: 400 kg Availability: at short notice Storage location: Röllbach

Condition: used, mileage: 410,411 km, power: 566 kW (769.54 HP), first registration: 04/2022, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, brakes: retarder, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 6,000 mm, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2022, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, lane keeping assist, parking heater, retarder, seat heater, spoiler, traction control, = Additional Options and Accessories = - Adaptive cruise control - Roof spoiler - Double glazing - Remote central locking - LED headlights - Leather interior - Alloy wheels - Air suspension - Engine brake - PTO - Radio - Disc brakes - Sun visor - Spotlights - Lane keeping assist - Auxiliary heater - Stationary air conditioning = Notes = .Scania R770 4x2 Full air suspension. Retarder. PTO. 9,000 kg front axle. 2 x diesel tank. Alcoa wheels. Fully covered chassis. Parking cooler. Parking heater. Leather seats. Heated and ventilated driver seat. Adaptive cruise control. = Further Information = Technical information Number of cylinders: 8 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Steerable; Tire tread depth left: 25%; Tire tread depth right: 45% Rear axle: Tire size: 315/80R22.5; Dual tires; Tire tread depth left inner: 75%; Tire tread depth left outer: 75%; Tire tread depth right inner: 75%; Tire tread depth right outer: 75% Weights Unladen weight: 9,085 kg Payload: 12,915 kg GVWR: 22,000 kg Interior Upholstery: Leather Identification Model number: R770 V8 4x2 / PARKING COOLER / 2 = Company Information = Ijdpfozmc Sajx Aa Eoti ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). We speak Russian. We make every effort to provide correct information, but no rights can be derived from the information provided.

Condition: good (used), Standard radiator, car radiator, oil cooler, heat exchanger Itjdpjzk Etbefx Aa Eoi -Oil cooler: Heat exchanger, without fan -Type: unfortunately no type designation -Pressure: max. 20 bar -Temperature: max. 120 °C -Dimensions: 270/130/H260 mm -Weight: 4.4 kg

Condition: excellent (used), Year of construction: 2008, 355 USED WP Aroma Cooler, a device for rapid cooling of bread and baked goods. TECHNICAL DATA: - Cooling temperature to: +18°C EXTERNAL DIMENSIONS (in cm): - height 305, - width 130, - length 227. Itodpfx Aeywummsa Eoi INTERNAL DIMENSIONS (in cm): - height 198, - width 78, - length 187. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: new, Year of construction: 2023, functionality: fully functional, Drying system / dryer suitable for various materials such as powder, granulate etc. - Control for temperature regulation Itjdpfxsqu R Naj Aa Eji This machine is connected and ready for testing in our machine hall.

Condition: excellent (used), functionality: fully functional, empty load weight: 6,980 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2023, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, suspension: air, tire size: 385/65 R22,5, color: white, Equipment: ABS, WIELTON NS-3 Standard Dry Freight Box Trailer SAF axles with disc brakes Lifting axle Air suspension with lifting/lowering function Swing doors Lashing rails Lashing rings Plywood box body 1x 15-pin 24V power connection 2x 7-pin 24V power connections ABS/EBS Unladen weight: 6,980 kg Internal cargo space dimensions: L 13.62 m, W 2.49 m, H 2.70 m Tyres: 385/65 R22.5 Tread depth: Isdpfjy Hk I Ejx Aa Ejti 1st axle left/right: 14 mm / 14 mm 2nd axle left/right: 14 mm / 14 mm 3rd axle left/right: 12 mm / 12 mm

Year of construction: 2018, condition: excellent (used), functionality: fully functional, We are selling a used cooler that is still in very good condition. The fins are clean. Please refer to the data sheet for more information. If you are interested, I can send the documents, i.e., the drawing, the data sheet, and the installation instructions, by email. The feet are included and can be seen in the pictures on the cooler. The cooler has its own frequency converter in the small control box for control. New price: approx. €23,000.00, excluding installation. This device has the following features: * Frost-proof due to 34% ethylene glycol → ideal for year-round outdoor use. * Energy-efficient thanks to EC fans with 0–10 V control. * Low noise (good choice for installation in residential or mixed-use areas). * Robust (galvanized, powder-coated steel housing RAL 7035, copper pipes/aluminum fins). * Easy integration (loose flanges DN 50, repair switch, emergency operation signal, terminal box). Summary: The device is a classic industrial/commercial dry cooler for closed glycol circuits. The most common applications are process cooling, data centers, food refrigeration, and large HVAC systems with free cooling. We would take over the loading free of charge upon purchase. The buyer would only need to commission a forwarding agent. Itsdpozly Ddjfx Aa Eji We do not provide any warranty or guarantee.

Year of construction: 2022, operating hours: 2,000 h, condition: like new (used), functionality: fully functional, We offer this like-new Ulmatec filter unit, model FES 20-35-4, for dry dust extraction of aluminum/plastic, manufactured in 2022. Manufacturer: Ulmatec Model: Filter unit FES 20-35-4 Year of manufacture: 2022 Condition: like new Type: Dry dust extraction for aluminum/plastic Category No.: 376 Iodjzlr Dcepfx Aa Ejti If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Rehsler cooler consisting of: Industrial cooler, refrigeration unit Ijdpfxezlkwuo Aa Esti Chiller Danfoss MTZ64HM4 air conditioning unit Condenser 125, 2 fans, d=450 mm, 230V, 3.6 A Conversion of chilled water system

Condition: used, Binder Model: VDL 115 Binder Safety Vacuum Drying Oven For sale is a BINDER VDL 115 safety vacuum drying oven, designed for professional use in laboratories, industry, and research. Device Description: The BINDER VDL 115 is an explosion-proof vacuum drying oven for gentle drying, degassing, and conditioning of materials under vacuum. The unit is specially designed for applications involving flammable solvents and meets high safety requirements (ATEX compliant). With precise temperature and pressure control, this device is ideally suited for reproducible laboratory and industrial processes. Typical Areas of Application: - Chemical and pharmaceutical laboratories - Research & development - Quality control - Industrial vacuum drying processes Temperature / Vacuum: - Temperature range: +9 °C above ambient up to approx. +110 °C - Ultimate vacuum: down to approx. 0.01 mbar - Electronic temperature and pressure control Features: - Safety glass window with shatter protection - ATEX-compliant design - Multiple shelf levels (number depending on configuration) - Connections for vacuum and inert gas Dimensions: - Internal volume: approx. 115–119 liters - Internal dimensions (W × D × H): approx. 506 × 460 × 506 mm - External dimensions (W × D × H): approx. 743 × 581 × 942 mm Electrical Data: - Rated power: 1.90 kW - Power supply: 230 V / 1N~ - Current consumption: 8.3 A - Frequency: 50–60 Hz - Protection class: IP54 - Nominal temperature: 200 °C - Temperature protection: DIN 12880, Class 2.0 - Weight (empty): approx. 158 kg Ijdpfxsziyymo Aa Ejti Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) (Specifications subject to changes and errors!) Should you have any further questions, we would be happy to answer them by phone.

Condition: like new (used), Edwards Edwards iXH4545H – Industrial High Vacuum / Dry Pump For sale is an Edwards iXH4545H, version MK1 HV MM96 Black EMS. This unit originates from a technical company environment and is part of Edwards’ high-performance iXH series, which is used globally in industrial high vacuum and coating processes. Technical Data Manufacturer: Edwards Model: iXH4545H Version: MK1 HV MM96 Black EMS Weight: approx. 890 kg Technical Specifications (iXH Series) Dimensions: approx. 1,240 × 860 × 1,310 mm (L × W × H) Pumping speed: up to approx. 4,500 m³/h (depending on gas & configuration) Ultimate pressure: < 1 × 10⁻² mbar Inlet: ISO 100 / ISO 160 Outlet: KF 40 / NW 40 Power supply: 400–480 V, 3-phase Power consumption: typical 12–18 kW Cooling: water-cooled (approx. 6–10 L/min) Description: The Edwards iXH4545H is an industrial high vacuum/dry pump from the 4500 series. It is typically used in: • PVD / CVD coating • Semiconductor industry • Process chambers / vacuum furnaces • Research & development Iedezixyfopfx Aa Esti • High gas load applications • Chemical/corrosive process gas environments The iXH series is renowned for its high reliability, robust construction, and 24/7 operational capability. Weight: approx. 890 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), mileage: 639,051 km, power: 360 kW (489.46 HP), first registration: 05/2017, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, Year of construction: 2017, Equipment: AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, retarder, seat heater, spoiler, = Additional options and accessories = - Aluminum fuel tank - Ventilated seats - Roof spoiler - Sleeper cabin - Automatic heating system = Further information = Brakes: Disc brakes Front axle: Steered; tire tread depth left: 70%; tire tread depth right: 70%; suspension: air suspension Rear axle 1: Lift axle; steered; tire tread depth left: 40%; tire tread depth right: 40%; suspension: air suspension Rear axle 2: Dual tires; tire tread depth left inside: 80%; tire tread depth left outside: 80%; tire tread depth right inside: 80%; tire tread depth right outside: 80%; suspension: leaf spring suspension Technical condition: very good Optical condition: very good = Company information = Curious about what we can do for you? Contact our sales team today! Our team of experienced specialists is available to you every day to assist you in finding the right vehicle. Would you like to see for yourself? Simply schedule a test drive and experience the vehicle firsthand. At KW-Automotive, you can expect a wide selection. We always have at least 50 high-quality light commercial vehicles and trucks in stock. This way, you are guaranteed to find a vehicle that meets your requirements and your budget. Every year, we support hundreds of satisfied customers – both in the Netherlands and abroad. Why KW-Automotive? Personal service Reliable vehicles Attractive prices Fast delivery, so you can get started right away Quick communication via telephone and WhatsApp Sales and delivery also to foreign countries For many years, we have been a reliable partner for our customers – and we are proud of that. Please note: All sales prices are exclusive of preparation and delivery costs. Itjdpfey Aampsx Aa Esi Would you like to learn more about a specific vehicle? Visit our website with detailed information, videos, and technical details. Do you need a quick answer? Simply write to us via WhatsApp! We will send you further information, photos, or a video immediately. Job van Eldik

Condition: used, mileage: 825,331 km, power: 390 kW (530.25 HP), first registration: 05/2019, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,150 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,510 mm, total width: 2,550 mm, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, lane keeping assist, parking heater, retarder, seat heater, spoiler, traction control, = Additional Options and Accessories = - Adaptive cruise control - Roof spoiler - Remote central locking - Leather interior - Alloy wheels - Lift axle - Air suspension - Engine brake - Radio - Disc brakes - Sun visor - Spotlights - Lane keeping assist - Auxiliary heater - Stationary air conditioning = Notes = Daf XF 530 6x2/4 Dutch registration. Smart tacho 2. Lift steering axle. Retarder. 2 tanks. Adjustable fifth wheel. Leather interior. 2 x leather, heated and ventilated seat. Parking cooler. Parking heater. Itjdpfx Aasyz Aqhj Esi = Additional Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Steered; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Air suspension Rear axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40%; Suspension: Air suspension Weights Unladen weight: 9,034 kg Payload: 17,966 kg GVW: 27,000 kg Interior Upholstery: Leather Identification Model number: XF 530 6x2/4 / RETARDER / PARKIN = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information, but no rights can be derived from the information provided.

Condition: used, mileage: 784,104 km, power: 353 kW (479.95 HP), first registration: 11/2018, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,160 mm, total width: 2,550 mm, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fridge, lane keeping assist, parking heater, traction control, = Additional Options and Accessories = - Adaptive cruise control - Remote central locking - Alloy wheels - Air suspension - Radio - Disc brakes - Sun visor - Spotlights - Lane keeping assist Itedezbcpcspfx Aa Esi - Auxiliary heater - Stationary air conditioning - Toolbox = Notes = Daf XF 480 FT Dutch registration. APK / TUV: 2 tanks. Toolbox. Parking cooler. Heated and ventilated driver seat. Front camera. Gen 2 V2 tachograph. = Further Information = Brakes: Disc brakes Front axle: Tire size: 385/55R22.5; Steered; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Leaf spring suspension Rear axle: Tire size: 315/70R22.5; Double tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 30%; Suspension: Air suspension Number of cylinders: 6 Unladen weight: 8,182 kg Payload: 12,318 kg GVW: 20,500 kg APK (Technical Main Inspection): Valid until 09/2026 Model number: XF 480 SUPERSPACECAB / PARKING C = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We do our best to provide accurate information, but no rights can be derived from the information provided.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Key Components of a Modern Painting System: Painting Booth: The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Iodoun R Ufopfx Aa Ejti Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Integrated Paint Supply System: An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!

Condition: ready for operation (used), Heraeus UT 6060 Heating Oven No. 415 Max. 300°C Dimensions: External: 750mm x 730mm x 580mm (L x W x H) Internal: 400mm x 350mm x 380mm (L x W x H) Further technical data can be found in the images. You are welcome to come and inspect the oven. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Ijdpelt Ut Rsfx Aa Esti Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Memmert SFE 600 heating oven Max. 70°C Further technical data can be found in the images. You are welcome to come and inspect the unit. Ijdpfxeip Um Aj Aa Eoti You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.