Filling machine for 25L drums

Boloni 25L drum afvullijn ATEX Boloni 25L Afvullijn

Condition: as good as new (ex-display), Exterior dimensions: Dia Ø 3600 mm Total H 11000 mm. Cylinder height: 10.200 mm. Vertical stainless steel tanks - 2 pcs. Conical bottom with 4" outlet. Rcodpfoicgn Tox Apdoh Conical top with ventilation. Manhule at front of bottom. AISI 304. Can be delivered with 1-2 sidemounted agitators. Can be delivered with new isolation completed with optional plates.

Condition: reconditioned (used), 20 cubic meter skip loader container with usable volume for roll-off tippers Beringer BPx5 Rsdpfx Aswifmzepdsch Reconditioned, inspected, and serviced Two-sided mounting Side-hinged discharge door Ramp operation possible Machines are reconditioned, inspected, serviced, and repainted in the desired standard RAL color. We will gladly prepare an offer including delivery.

Condition: used, Year of construction: 2017, Overview This glass bottle filler and capper was manufactured in 2017 by the Italian company GAI. The MLE 881 Bier model is designed for filling and capping beer and also wine in glass bottles with high precision and versatility. It supports crown caps, making it ideal for breweries and beverage producers handling different packaging requirements. The machine is in very good condition and ready for operation as it was only used from time to time due to low volumes, as the market was mainly can dominated. The machine can be shown in a test with water. Technical data - Nominal Capacity: 1,500 bottles/hour (based on 0.33 L format) - Bottle formats: max. bottle diameter is 115 mm, infeed screw works universal for bottles from 60mm to 115mm Redpfxjzcu Sls Apdsch - Closure types: Crown caps - Filling system: Isobaric (for beer and carbonated beverages) - Product types: Beer and other carbonated drinks - Incl. dummy bottles and CIP cups - With double pre evacuation systsem for lower oxygen pick up - Machine is cleanable with a CIP system

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF500LH is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 500 kg. Due to the compact design and low height this baler is perfect for rooms with limited ceiling heights. The waste baler impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 500 kg (material depending) Bale size: 1100 H (var.) x 1400 W x 800 D mm Machine size: 2249 H x 2041 W x 1350 D mm Rcedpfx Apsvugzfodoh Machine weight: 2100 kg Transport height: 2249 mm Loading aperture: 1400 W x 680 H mm Cycle times: 35 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Auto control panel with bale full light and E-stop with locking key Strap eject for easy removal of bales Retainer for reducing the material spring back Low height, perfect for limited ceiling heights Hour counter Reel holder for 6 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Cans and PET bottles Light valuable materials Optional extras Machine colour RAL Strapping rolls Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF200MK is the ideal multi chamber waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 200 kg. Various materials can be collected into two or more chambers installed next to each other and once a chamber is filled the rollable compaction head will be moved over and the material can be baled. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 16 Ton Bale weight: up to 200 kg (material depending) Rsdpfjva Hupjx Apdech Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine size: 2506 H x 3260 W x 1269 D mm Machine weight: 1400 kg Transport height: 2506 mm Loading aperture: 1100 W x 800 H mm Cycle times: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Short processing time because there is always a chamber available for loading Retainer for reducing the material spring back Reel holder for 8 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Extra chamber (up to 6 chambers in total) Strapping rolls Twin Chamber Waste Baler, Multi Chamber Waste Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: used, Year of construction: 2007, Overview The pallet wrapper was built in 2007 by Italian manufacturer Robopac. The machine was used in a water and CSD production plant where it was part of a PET filling line with a capacity of 27,000 bph. The pallet wrapper was professionally dismantled and requires technical maintenance. Technical details Capacity: about 60 pallets by 23 wraps Working hours: 45 363 Pallet top cover function + Upper pressing unit Scope of delivery  Pallet wrapper Belts, rollers Sensors on conveyor belts (infeed, outfeed, diagonal). Spare parts (new and used) Documents Rsdpfx Ajrwr T Nopdsch

Condition: reconditioned (used), Year of construction: 2020, pressing force: 50 t, filling opening width: 670 mm, filling opening length: 1,200 mm, bale length: 1,200 mm, bale weight: 450 kg, total width: 800 mm, total height: 800 mm, power: 7.5 kW (10.20 HP), empty load weight: 2,180 kg, input frequency: 50 Hz, Tested and ready for operation, Vertical baler Dixi 50S PET Year of manufacture: 2020 Bale dimensions (L x W x H, mm): 1200 x 800 x 800 - 1100 Bale weight (kg): approx. 350-500 kg Rcsdpfowviz Nsx Apdeh Specifications (L x W x H, mm): 1600 x 1300 x 3100 Loading opening (mm): 1200 x 670 Pressing force: 50 tons Power supply: 400 Volt Press immediately ready for use Net price plus VAT Delivery available at extra charge.

Condition: used, color: orange, lifting height: 3,410 mm, Year of manufacture: 2019 Year of construction: 2019 Operating hours: 3.650 Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m = Additional options and accessories = Rcjdsxqfb Eopfx Apdoh - Rubber tracks

Condition: good (used), Year of construction: 2009, Excavator KOMATSU PC130 Rcsdpfx Aoyax Avspdsh No. KMTPC202L02080252 9602 hours 72.1 kW Year: 2009 Serial No.: 80252 - excavator offered without bucket

Condition: used, Year of construction: 1994, operating hours: 8,143 h, Equipment: all wheel drive, * Sunroof * Driver’s suspension seat * Shunting hook Redpjy Scr Hefx Apdjch * Auxiliary heater * Crawl speed ---Superstructure: ROPS driver’s cabin, heated, Engine: Water-cooled 4-cylinder Deutz diesel engine, type 1012, 65 kW, all-wheel drive, travel speed 20 km/h, 8-ply tires, track width approx. 2,530 mm, dozer blade 2500/600 mm, hydraulic axle supports, mechanical quick-change system, adjustable boom, hammer + grapple piping (7 hydraulic connections), excavator bucket 1000 mm / 634 liters For sale to commercial businesses only. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT + ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase contracts, invoices, pro forma invoices, orders, and sales negotiations.