Used Driving for sale (21,687)

Condition: new, Year of construction: 2024, Schneider compressor UNM 510-10-90 D A714000 Mobile piston compressor with horizontal tank Standard with all safety fittings and electrical connection cable with plug and Condor pressure switch Air receiver equipped with safety valve, receiver pressure gauge and condensate drain valve. Welded rear handle improves loading and transportability Fully automatic operation due to pressure switch with start-up relief, motor protection and on/off switch With upscale equipment for universal use With V-belt drive, 2 cylinders in series arrangement for particularly smooth running and 400 V three-phase motor with external motor protection Low compressor speed - thus protecting the compressor components, lowering the noise level and reducing vibrations Large fan flywheel for optimal cooling Including filter pressure reducer for regulated compressed air, cleaned from condensate, dirt and oil With 2 m rubber-coated supply line and air outlet via quick coupling Supply line with phase inverter 10 years warranty on tank against rusting through Technical specifications Pressure 10 bar Gsdpebyhvrofx Afiouh Suction capacity 510 l/min Filling capacity 390 l/min Speed 1240 min-1 Reservoir volume 90 l Weight 80 kg Noise level 97 dB(A) Dimensions (WxDxH) 1070x495x895 mm Drive power 3,0 kW Voltage 400 V Location: ex stock Bitburg subject to prior sale

Condition: new, Year of construction: 2025, Glue spreading machine / Glue roller machine Brand: ORMA/Osama Type: I/213 (S2R-1300) working width: 1.300 mm max. passage height: 100 mm speed: 18 m/min working height: 900 mm diameter of application rollers: 185 mm connected load: 0,5 Hp 0,37 KW operating side: right Electricity: 400 V/ 50 Hz/ 3 phases Goded Iz Dfopfx Afisuh Technical equipment: - Structure of the glue spreader made of welded sheet metal. - 1 motor for driving the two rollers - Glue spreader rollers covered with acid-resistant special rubber, form-ground and grooved, wear-resistant. - The thickness of the rubber layer can be shape ground several times. - Special dampers on the roller supports, which allow automatic opening of the rollers to compensate for unevenness up to max. 5 mm on the workpieces. - Glue dosage by means of zinc sheet distribution tray. Easily extractable for cleaning. - 1 handwheel to adjust the opening of the rollers. - Accident prevention protection of the rollers - Electrical components according to the highest quality standard - CE standard

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables in one piece allow easy dressing of the workpieces Worktables are made of grey cast iron, therefore insensitive and permanently flat Backward opening dressing tables with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time Helical toothed steel infeed roller ensures constant and even wood infeed Rubber pull-out roller in the thickness outlet ensures even wood pull-out Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planing height DIGITAL version: with electrical thicknessing table height adjustment and digital display On and off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for long hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Weight approx. 695 kg Dresser Total length of the tables 2250 mm Chip removal max. 5 mm Stop length 1200 mm Fence height 150 mm Dust extraction connection Suction nozzle diameter Thickness 1 x 120 mm Drive power Main engine 7 kW Installation information Space requirement Length 2250 mm Space requirement width/depth 1440 mm Guedpfxeff Hdpo Afish Explanation Place [...]

Condition: new, Year of construction: 2025, Vertical design for splitting short and metre logs Low base plate for easy, low-fatigue loading of large logs Mechanical log lifting device brings heavy logs into position without strain on the operator's back With splitting material catcher Fast, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Guedpjhkz Hmefx Afish Two-hand safety circuit Comfortable transport with hand drawbar due to standard chassis with hard rubber wheels and additional support wheel Shock and scratch resistant due to high quality powder coating Space-saving storage due to easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Width/depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type electric motor Input power 3,5 kW Electrical data Supply voltage 400 V Mains frequency 50 Hz Equipment data Splitting force max. 14 t splitting length min. 560 mm splitting length max. 1040 mm splitting material diameter min. 100 mm splitting material diameter max. 300 mm Hydraulic system Tank capacity hydraulic oil 7,5 l Location: ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next Gjdpfxoi Am U De Afieuh With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. Gujdpolht Hzsfx Afijh max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: as good as new (ex-display), Year of construction: 2022, Kaeser screw compressor SM 13 - 11 bar exhibition piece at a special price Volume flow at 11.0 bar (g) 1.07 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 9.63 kW Specific power 9.00 kW/(m³/min) Gedpfx Afsvk R A Ssiouh Maximum overpressure 11.0 bar Drive motor efficiency at full load 91.7% Drive motor efficiency class IE4 Nominal drive motor power 7.5 kW Drive motor speed 2955 rpm Drive motor protection class IP 55 Electrical supply 400 V / 3 Ph / 50 Hz Compressed air outlet temperature above ambient temperature (at +20°C, 30% relative humidity) 8 K Sound pressure level 65 dB(A Compressed air connection G 3/4 Location: From stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position Gusdpovk Scgjfx Afish TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: new, Year of construction: 2024, Description The universal ones with V-belt drive and high-quality equipment. Especially suitable for craftsmen. These compressors are used where quality of compressed air as well as durability and efficiency are essential, long service life thanks to 2-stage high performance units with low speed, specially machined cast iron cylinders for minimum oil consumption and long service life, high performance valves, optimum cooling due to large fan impeller, motor with overload protection, easy draining of condensate due to standard mounted ball valve 1/2", standard with Condor pressure switch and manometer, standard on safety stand pallet with swinging elements, tank manufactured according to German regulations AD 2000. Further links to "GEWEMA Stationary piston compressor type GEKOMP BK119-270-10V". Technical data Suction capacity: 650 l/min Filling capacity: 520 l/min. Maximum pressure: 10 bar Tank capacity: 270 l Technical data "GEWEMA Stationary piston compressor type GEKOMP BK119-270-10V". Maximum pressure: 10 bar Suction capacity: 650 l/min Filling capacity: 520 l/min Motor power: 4 kW/400 V Cylinder/stages: 2/2 Speed: 920 min-1 Tank capacity: 270 l Guodpfx Ajhk Dd Uefish Location: Ex stock 54634 Bitburg - immediately available-

Condition: new, Year of construction: 2025, Technical data: Suction capacity 510 l/min. Filling capacity 400 l/min. Maximum pressure 10 bar Tank capacity 90 l Cylinder/stages 2/1 Speed 1.300 min/1 Motor power 3 kW/ 400 V Description: The universal with V-belt drive and qualitative equipment especially suitable for craftsmen for use where compressed air quality, durability and efficiency are essential long life thanks to high performance low speed units safe transport and excellent stability thanks to large wheels with parking brake Optimum cooling thanks to large fan impeller aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air better efficiency due to optimised aggregates Standard with: Condor pressure switch Pressure gauge Gusdshk Dfkjpfx Afish Pressure reducer with water separator and Rectus quick coupling Motor with overload protection Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Combined saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast table High-precision sliding carriage made of anodized aluminum (travel 2250 mm) Large trimming frame (900 x 600 mm) with telescopic aluminum fence extendable up to 2660 mm with professional stop flaps Max. Saw blade Ø 315 mm with scoring device, tiltable from 90° - 45 Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double cradle milling unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free gray cast iron Three milling speeds, manually adjustable from 3500 - 10000 min-¹ With right-left rotation of the milling spindle Gjdpfxohp Rdlo Afieuh Standard arc milling protection hood Safety turning stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Connection suction Suction port diameter 2 x 120 mm Suction port diameter saw blade guard 60 mm Electrical data Power drive motor 2 x 5,0 kW Supply voltage 400 V Mains frequency 50 Hz Milling spindle spindle inclination 0 - -45 ° useful length of spindle 100 mm spindle speeds 3500/7000/10000 min-¹ Milling tool diameter max. not lowerable 210 mm lowerable 180 mm tenon milling 275 mm K

Condition: new, Year of construction: 2025, Surface planer minimax fs 41es TERSA Maximum equipment for the professional. Part number 5503431 Brand Holzkraft / SCM Diagonally toothed steel feed roller for constant and even material feed, resulting in chip removal from as little as 0.2 mm (with min. workpiece thickness of 3 mm) - ideal for economical planing of precious woods Models with TERSA cutterblock for changing planing knives in seconds and particularly quiet running Material feed with two speeds Particularly long dressing tables allow easy and precise dressing of workpieces Work tables made of gray cast iron, annealed and stress-free, thus insensitive and permanently flat Dressing tables opening to the rear simultaneously for short set-up times Planer thickness table adjustment via handwheel with numerical display for planer height Cgiptddi High machine weight for maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction Quality - Made in Italy TECHNICAL DATA Dimensions and weights Length (product) approx. 2200mm Weight (net) approx. 450kg width/depth (product) approx. 1160mm Dressing table Total length of tables 2200mm Dressing fence length 1200mm Working height 905mm Dressing fence height 150mm chip removal max. dressing 5mm Connection suction Suction port diameter thickness 1 x 120mm Thickness thickness table length 775mm working height thickness max. 240mm Thickness table width 410mm Chip removal max. thickness 5mm Working height thickness min. 3mm Electrical data Power drive motor 5kW Mains frequency 50Hz Supply voltage 400V Planer cutterhead Planing shaft type TERSA Planing shaft speed 5000min¯¹ Planing shaft diameter 95mm Planing width max. 410mm Number of planing knives 4pcs Feed rate feed speed 6 / 12m/min Gedpfxolht Hto Afijuh SCOPE OF DELIVERY Planer jointing fence with round bar guide & auxiliary fence Two feed speeds Tersa planer shaft Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Guedolht H Eepfx Afish Location: 54634 Bitburg

Condition: new, Year of construction: 2022, Kaeser screw compressor SK 22 - 11 bar - exhibition piece - Volume flow at 11.0 bar (g) 1.67 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 13.7 kW Max. overpressure 11.00 bar Drive motor efficiency at full load 91.2% Drive motor efficiency class IE3 Gjdpovk R Dcefx Afiouh Drive motor rated power 11.0 kW Drive motor speed 2960 rpm Drive motor protection class IP 55 Electrical supply 400V / 3 / 50Hz Compressed air outlet temp. above ambient temperature (at +20°C, 30% relative humidity) 6 K Sound pressure level 66 dB(A) Max. usable warm air volume 2500 m³/h Compressed air connection G 1 Cooling oil capacity 7.0 l Cooling oil type compressor SIGMA FLUID MOL Dimensions (W x D x H) 750 mm x 895 mm x 1260 mm Weight 312 kg Location: from stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Holzkraft Vertical Panel Saw VPS 2241 VR ED Fully equipped, precision panel saw Item number: 5600242 DESCRIPTION • Smooth and ergonomic operation • Scoring unit for chip-free cutting quality • Automatically retracting slat frame • Continuous central workpiece support • Two stops for dimensioning Gujdow Aqaaopfx Afioh • Panels rest on movable rollers and can be positioned without lifting • Modular welded machine frame, torsion-resistant and self-supporting • Saw unit with chain guide and two control levers • Large opening for saw blade change TECHNICAL DATA General Information • Cutting height: 2200 mm • Cutting length: 4100 mm • Cutting depth: 60 mm • Saw blade diameter: 250 mm • Saw blade speed: 4800 rpm • Scoring blade diameter: 80 mm • Scoring blade speed: 8500 rpm • Number of stops: 2 • Sound pressure level: 89.2 dB(A) Dimensions and Weights • Max. height (product): 3100 mm • Approx. length (product): 5300 mm • Approx. width/depth (product): 1800 mm • Approx. height (product): 3000 mm • Approx. net weight: 600 kg Extraction Connection • Extraction port diameter: 100 mm • Minimum extraction air volume: 1000 m³/h • Minimum air speed: 20 m/s Electrical Data • Drive motor power: 3 kW • Connection voltage: 400 V • Mains frequency: 50 Hz SCOPE OF DELIVERY • Saw blade Ø 250 x 30 x 3.2 mm Z80 trapezoidal • Scoring blade Ø 80 x 2.8-3.6 mm Z20 EQUIPMENT FEATURES • Lower material support: metal rollers • Retractable slat frame: automatic • Vertical digital measuring display • Horizontal digital measuring display • Panel positioning: on movable rollers without lifting Location: ex works - Available at short notice - Subject to prior sale

Condition: excellent (used), Year of construction: 2000, Stanko Universal Tool Milling Machine Model SMK 25/32 TNC355 Low hours – previously used in a school Machine No.: 55 Year of manufacture: 2000 Travel X: 400 mm, Y: 320 mm, Z: 440 mm Table size: 800 x 320 mm Spindle taper: ISO 40 Spindle speed: 40 – 2000 rpm Feed rate X, Y, Z axes: 10 – 1000 mm/min, infinitely variable Rapid traverse X, Y, Z axes: 1800 mm/min Quill stroke: 60 mm Spindle motor drive power: 3 kW Electrical connection: 380 Volt, 50 Hz Torque. Horizontal spindle: 230 Nm Vertical spindle: 82 Nm Total power: 5.87 kW Control voltage: 110 Volt Feed drive power: 2.2 kW Feed force: 7500 N Distance horizontal spindle to table clamping surface: Minimum 45 mm Maximum 595 mm Distance vertical spindle to table clamping surface: Minimum 45 mm Maximum 490 mm T-slot width: 14 H 7 mm T-slot spacing: 50 mm Number of T-slots: 5 Equipment: - CNC contouring control Heidenhain TNC 135 - 18 spindle speeds - Fixed angle table - Chip collection tray - Coolant splash guard and chip protection shield - Coolant system - Centralized lubrication - Lighting - Heidenhain control Gusdpfx Aew D Hmlsfish - Electromagnetic clutches for feed transmission - Hydraulic-mechanical axis clamping - Hydraulic tool clamping - Centralized lubrication for guideways and gearbox - Precision ground flat guideways Space requirement (L x W x H): 1685 x 1890 x 1890 mm Weight: 2200 kg Good condition – Ex-school machine Low hours Location: ex-stock 54634 Bitburg - Immediately available -

Condition: new, Year of construction: 2025, OPTIturn TU 2004V - Lathe with infinitely variable speed control and digital speed display Picture shows OPTIturn TU 2004V Lathe with infinitely variable speed control and digital speed display Precise processing Heavily ribbed prismatic bed made of cast steel, inductively hardened and precision ground Hardened and ground bed guideways Hardened spindle nose (DIN 6350) Guaranteed concentricity of the spindle nose better than 0.009 mm Automatic length/lead spindle drive With longitudinal, cross and top slide Right-/left-handed rotation switchable in the control panel Emergency-stop pushbutton Rotary chuck protection Thrust bearing Lead screw mounted in two sintered bearings Large thread cutting range due to change gear set Simple and fast speed change via V-belt Change gearbox EMV filter class B (use in private households) Equipment details: Digital speed display Easy to read digital speed display Chip protection on the top slide Quadruple steel holder rotatable Roll rolled trapezoidal threads Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scaling 0.02 mm Main spindle Hardened and mounted in adjustable precision taper roller bearings Tapered roller bearings in P5 quality Cylindrical centering seat Hardened spindle nose with Ø 21 mm spindle bore Gedpfxscnxrce Afiouh Lathe chuck Concentricity better than 0,04 mm Scope of delivery: Three-jaw chuck Ø 100 mm centric clamping

Condition: as good as new (ex-display), Year of construction: 2025, OPTIdrill D 26PRO - Column drilling machine Table and column drilling machine with V-belt drive User-friendly safety switch in accordance with IP 54 with undervoltage release and separate emergency stop switch 400 volt models with right/left rotation Drilling depth stop Precisely machined drilling table with diagonal T-slots Height adjustment of the drilling table via rack Drilling table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Aluminum die-cast spindle lever made from one piece with soft-grip handles Gjdpfxodqzbne Afieuh Industrial motor Precision spindle bore Machine operation including safety electronics in 24 V direct current Guaranteed concentricity

Condition: new, Year of construction: 2025, Heavy machine base guarantees high torsional rigidity and vibration-free operation Better sanding results due to sanding belt oscillation via separate gear motor Oscillation optionally switchable Veneer edge sanding device with fine adjustment as standard Grooved infeed ruler for sanding veneer overhangs Gjdpoff Ed Tsfx Afijuh Quick changeover from veneer to solid wood sanding Height-adjustable sanding table for utilization of the entire sanding belt width Height adjustment of the sanding table and sanding unit swivelling via hand wheels Height-adjustable additional table with suction device for grinding radii Optimum chip removal through extraction at the unit and at the cross table Automatic compensation of strip length differences due to spring-loaded strip tension Dimensions and weights Length approx. 1900 mm width/depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Suction socket diameter 120 mm Drive power Oscillating motor 0,25 kW Work table(s) Working table length 960 mm Working table width 352 mm Working table height adjustment 210 mm Cross table height min. 730 mm Electrical data Input power 3 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt speed(s) 20 m/s grinding surface length 1050 mm Grinding surface width 220 mm Swivel 0 - 45 ° Oscillation stroke 20 mm Availability: Short term

Condition: new, Year of construction: 2025, Robust design also allows the machining of longer workpieces Sanding unit swivels, therefore also usable as edge sanding machine 225 mm large balanced belt rollers ensure low-vibration drive. Easy adjustment of the grinding belt High belt speed of 17 m/s Right-left rotation Upper grinding sole with graphite coating grinding shoe 4-fold spring mounted With movable grinding shoe for bevelled surfaces Smooth-running grinding table even with high loads from heavy workpieces Optimal price-performance ratio Additional equipment ESE Electrical table height adjustment as standard Divided table to fold up for special edge grinding Drawer sanding device Integrated worktable lighting Equipment details 225 mm large balanced belt rollers ensure optimum and low-vibration drive belt speed 17 m/s With swivel-mounted professional sanding shoe for bevelled surfaces 4-fold spring suspension Electrical table height adjustment as standard Operating elements ergonomically arranged on separate control panel With drawer sanding device as standard Divided table to fold up for special edge grinding applications Dimensions and weights Length approx. 3750 mm width/depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust extraction connection Suction nozzle diameter 160 / 160 mm Work table(s) Work table height adjustment 550 mm Work table transverse stroke 690 mm Electrical data Power Höh Godpsff Hdfefx Afieuh

Condition: new, Year of construction: 2025, Designed for professional structuring and grinding work Motorised height adjustment of the working units with digital display Aggregates can be switched on individually Highly resistant rubberized conveyor belt Stepless feed Inlet height constant Models str l with infinitely variable, inverter-controlled brush speed: this enables the speed to be precisely adapted to the material, making them particularly suitable for sensitive materials. Unit for saw cut optics optionally available Motor-driven height adjustment of the units Aggregates can be switched on individually feed infinitely variable Dimensions and weights Length approx. 1300 mm width/depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Suction nozzle diameter 2 x 150 mm Brushes diameter 190 mm length 300 mm revolution 1500 min-¹ Electrical data Drive motor power 2 x 3.0 kW Power feed motor 0,22 kW Input power 6,25 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Noise emission Sound power level Lw (idling without extraction) 65 dB(A) Sanding unit grinding width max. 300 mm Feed unit Guodpeff Hdgjfx Afish Feed speed 1 - 13 m/min Workpiece Height max. 300 mm Weight max. 100 kg

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables made of one piece allow easy dressing of workpieces Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open to the rear, simultaneously, with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Gujdpfeff Hdmsx Afijh Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm weight approx. 695 kg Dresser Total length of tables 2250 mm chip removal max. 5 mm fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thicknessi [...]

Condition: new, Year of construction: 2025, Versatile and powerful Pumping out of ponds, pumping out of cellars, e.g. in case of floods, irrigation of flowerbeds Sucks up even water contaminated with sand, cleaning agents or oil, e.g. sewage, mud, ... Approx. 2.5 hours running time with one tank filling at 75% load Robust, durable and reliable Functional in all weather conditions Spiral housing and impeller made of cast iron, thus highest robustness and long service life of the pump, even when used with sandy water Powerful and efficient 4-stroke engine, easy to start in all conditions Robust steel frame with vibration dampers Built-in diaphragm prevents backflow of water Easy to operate Quick and easy start-up by directly creating the vacuum and connecting the hoses to the pump Convenient maintenance Gjdpfx Ashkz Husfiouh Dimensions and weights Length approx. 560 mm Width/depth approx. 430 mm Height approx. 465 mm Weight approx. 36 kg Drive Engine power 4,5 kW Fuel petrol Pump Application area dirty water Delivery head max. 26 m Delivery rate 966 l/min Inlet/outlet diameter 76.2 mm Suction height 7 m Grain size max. 27 mm Scope of delivery: 2x hose coupling 2x union nut 2x rubber seal 3x hose clamp 1x suction strainer 1x Hose coupling for suction strainer 4x rubber foot 1x set of assembly tools Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: as good as new (ex-display), Year of construction: 2025, - NEW - Make Ganner Gannomat type SELEKTA 253 220 V, 1 Ph, 50 Hz complete in standard version with: - fully automatic electronic control with program selector switch SPUeLING-LEVeLING/INsERTING - lever feed via electronic vibration transducer with potentiometer for stepless adjustment of the duebel feeding power - Automatic duebell diameter and duebell quantity control with Auto-DL-Select system (automatic ejection of wrong dumbbell diameters +/- 5 mm into the collection container) - Closed glue system with 6 bar glue pressure via glue nozzle for glues with viscosity from 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer via Time preselection by electronic control - LEIM/WASSER selector switch for rinsing/cleaning of the glue system with EasyClean function button (automatic cleaning program for glue tube and (automatic cleaning program for glue hose and glue nozzle via spraying funnel and waste water collection container) Guedpfjdwi Rkex Afieh - Control lamp for glue residue indication in the glue container - 1 stainless steel container for 5 kg glue and 1 stainless steel container for 5 l water for rinsing/cleaning - 4 rollers for pushing the machine including 1 pistol for Ø 8 mm dowel length 25 - 40 mm driving distance 7 - 20 mm air connection: 6 bar price from 11750,-- EUR ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Quick belt tension via lever Upper belt support with graphite coating 250 mm large balanced belt rollers ensure optimum drive. With electrical height adjustment With suction and noise protection devices With noise protection certificate With two speeds Adapts to surfaces due to swivel-mounted grinding shoe Angled surfaces Clockwise and anti-clockwise rotation as standard The quick belt tensioning system allows quick and easy changing of the abrasive belts. delivery is carried out partly assembled Dimensions and weights Length approx. 4540 mm width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Godpfeff Hdbox Afiouh Suction nozzle diameter 2 x 140 mm Work table(s) Work table height adjustment 620 mm max. working width on table 900 mm Electrical data Power of height adjustment motor 0,37 kW Power of suction motor 0,75 kW Drive motor power 3.3 / 4.5 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit grinding belt length 8100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s grinding shoe length 360 mm grinding shoe width 150 mm Workpiece Height max. 590 mm height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table Machining of the workpiece with overhang right over the work table possible