Used Drive Controller for sale (52,970)

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), axle configuration: 4x4, fuel: diesel, color: red, gearing type: semi-automatic, emission class: euro6, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, trailer coupling, From our portfolio of new vehicles, we offer: TLF 4000 All-wheel drive on an off-road MAN TGM 18.320 all-wheel chassis Our Water Buffalo on MAN Hardly any terrain is too difficult for it. Calm and powerful, it reliably delivers its load to the destination. At the incident site, it demonstrates its full capabilities—transporting crew, equipment, and sufficient extinguishing agents to the scene, supported by a high-performance pump. Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW) • Automated transmission • Off-road tires • Single wide tires matched to track width for maximum off-road capability Cab: • Standard crew cab (1+5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 SCBA mounts in the crew compartment Superstructure: • High-quality frame-style superstructure made from stainless and corrosion-resistant materials • Folding steps for each side-mounted equipment compartment • Individually customised stainless steel equipment storage solutions • Walkable, non-slip vehicle roof Vehicle pump / Extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP FPN 4000-10 • PUMP & ROLL capable • Output: 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely variable foam proportioning system • Water tank 5,000 l with integrated 500 l foam agent tank • Auxiliary heater in the pump compartment Firefighting equipment: • High-pressure rapid intervention reel with 50 m rigid hose • Roof-mounted foam/water monitor, 2,000 l/min • Self-protection system with 4 spray nozzles in front of the wheels Safety and lighting: • LED lightbar on the roof / 2 LED front flashers • Pneumatic special signal system Martin-Horn • 100 W PA system with announcement unit • Rear-view camera • Comprehensive LED lighting in crew and all equipment compartments • LED scene lighting on the superstructure and additional spotlight Rsdsxzu Ehspfx Ahvsbw • Pneumatic LED light mast with remote control • Hygiene board available on request We would be happy to provide you with a detailed offer and present the vehicle to you at our site in Berlin. All details provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement constitutes information and is not a binding offer. Subject to prior sale!

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0/200/06/3164, overall weight: 6,500 kg, total length: 12,600 mm, workpiece weight (max.): 5,500 kg, Softforming edge banding machine , in operation, used condition, year of manufacture 2003, Rbedpfx Ahevx Ep Nevew

Condition: used, functionality: fully functional, conveyor belt width: 300 mm, total length: 5,050 mm, total width: 450 mm, power: 0.25 kW (0.34 HP), motor manufacturer: SEW, Equipment: type plate available, Belt Conveyor / Conveyor Belt Manufacturer: Schunk Fördertechnik GmbH Redpfxeyvhr Te Ahvebw Condition: used Model: Belt Conveyor Total length: approx. 5050 mm Total width incl. motor: approx. 450 mm Total width without motor: approx. 330 mm Conveying width: approx. 300 mm Belt type: fabric belt Material: steel/aluminum Frame height: approx. 50 mm Includes SEW motor 0.25 kW/rpm. 1300/400/1600/49.0 Including speed controller Including 4 height-adjustable feet Internal item number: 2026031802 The conveyor system was in operation until dismantling. Features: Condition: fully functional, with signs of use Ideal for rapid material transport Professionally dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent build quality of the conveyor system, your material will glide smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, incline conveyors or telescopic conveyors for loading and unloading your goods, we are your expert partner! We are happy to prepare a quote tailored to your requirements or advise you on system planning or installation questions. Simply let us know your needs and the site conditions. Benefit from our many years of experience and extensive network of professionals. We have successfully completed projects for companies in a range of industries such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will find ways to optimize your operations and material flow cost-effectively and sustainably. We can also offer fully automated sorting technology or additional components such as picking racks or containers.

Condition: used, BLUM Laser Control P87.0634-014-A4 Lasercontrol Werkzeugvermessung Rodpfeyr Smlex Ahvobw

Condition: used, HEIDENHAIN PL 410B Power board .: 263 371-12 This control element was removed from a functioning machine and dismantled. and dismantled. Rbjdpfxsyr Smfo Ahvsw

Condition: used, Year of construction: 2014, turning diameter: 340 mm, turning length: 2,000 mm, total length: 4,270 mm, total width: 2,130 mm, total height: 1,840 mm, overall weight: 3,900 kg, 2-Axis Teach-In / Cycle controlled CNC Lathe CNC Control Fagor 8055 I Power TC Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle bore diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2.500 R/min Movement X-axis 310 mm Rsdpfsyr I Rtex Ahvobw Movement Z-axis 2000 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2003, Tilting panel saw Altendorf F45 with ELMO IV-plus package, 2-axis scorer, 3m table, and Control-Plus control Sliding table length: 3000 mm Saw blade tilting from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Control panel at eye level with Control-Plus control 4-axis CNC controlled Cutting of chain measurements and grooves on the rip fence and crosscut fence Cutting width correction on the rip fence and crosscut fence with tilted saw blade 600 cutting programs Calculator function with direct transfer of results to the respective axis Tool management Saw blade diameter up to 450 mm Max. cutting height: 150 mm Cutting width up to 1040 mm, electrically adjustable Tilting angle and height adjustment electrically adjustable Crosscut fence rail up to approx. 3210 mm, electrically adjustable, automatic coupling of the second stop flap for large dimensions Folding rip fence Extraction outlets: 120 + 80 mm Sliding carriage lockable Additional mitre fence rail 2 used saw blades and one scorer blade 2 riving knives 2-axis scoring unit, electrically adjustable during operation 2 blade guards 3 emergency stop switches Clipboard at the control panel CE marking Machine shows signs of wear. No cuts in the sliding table. Original paint (special paint finish), partially repainted in some areas. Rodpfx Ahjxw Ii Sjvobw Machine has 18,985 operating hours. It originates from a furniture factory and has been regularly serviced and well-maintained. Condition as per original photos. A video of the machine in operation can be provided upon request. Approx. dimensions: 3150 x 3750 x 1900 mm (L x W x H). Weight approx. 1400 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, tilt adjustment saw blade: 46 °, height adjustment type: electric, table height: 910 mm, We are offering this as-new Altendorf F45 Evo Drive panel saw, year of manufacture 2023. ALTENDORF F45 EvoDrive Panel Saw – 2023 Model – Excellent Condition Precise and immediately ready for use Year of manufacture: 2023, equipped with modern control technology and high-quality standard configuration. Rjdpeyu Ufvofx Ahvobw The machine has been carefully used, is in very good condition, and offers maximum precision for professional applications in joinery, furniture, and interior construction. Equipment & Technical Data Carriage length: 3000 mm Cutting length: 2905 mm Working height: 910 mm Main saw blade swivel range: 0°–46° Serial no.: 23-02-12-050 Highlights of the base machine: Double roller carriage (standard) with 3000 mm carriage length Electromotive height and swivel adjustment 0°–46° Automatic cutting height correction when swiveling Eye-level, swiveling control panel Large 7" touch display with separate keypad Precise input for height, tilt, and diagonal measurements Digital display for height and tilt angle Simple axis calibration Condition The machine is in excellent technical and visual condition, is fully functional, and ready for immediate use in production. Payment & Collection Payment: Bank transfer prior to collection Collection: Handover after full payment Inspection: Possible before collection Transport / Loading: By the buyer (assistance on site available) Available from: June 2026 If you have any questions or require further information, please send us a message or give us a call.

Condition: excellent (used), Year of construction: 2014, ABB IRB7600-340/2.8+ IRC5 controller+TPU DEVELOPMENT OF GSG ROBOTICS Redpfx Ahoxq Tuaevjbw GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2016, ABB IRB4400L-10+IRC5 controller+TPU-Low DTC DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Rsdpfx Aexq Tt Nshvjbw

Condition: excellent (used), Year of construction: 2021, operating hours: 2,600 h, ABB IRB4600-45/2.05 Robot and IRC5 controller-TPU-RW6.X Rbodoxq Tq Uepfx Ahvjw DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), ABB IRB4600-60/2.05 Robot and IRC5 VELOPMENT OF GSG ROBOTICS Rsdpfx Ahsxq Tq Ievjbw GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), DEMAG / ABB / TELEMECANIQUE – Frequency Converters / Inverters – 11 units: 1. DEMAG Type - ACS800 04M-0140-3+D150+E210+H355+H356+H360 with resistance unit (new) – 1 unit. 2. DEMAG Type - ACS800 04M-0210-3+D150+E210+H355+H362+N672 with resistance unit (used) – 1 unit. 3. DEMAG Type - UD DPU415V024E10 – 1 unit. Rsdpfx Aoyu S Alshvobw 4. TELEMECANIQUE Type - ATV 58ED23N4 – 15 kW (in original packaging). 5. DEMAG Type: ABB – ACS 800 – 2 units. 6. DEMAG Type: ABB – ACS 800 – 1 unit. 7. VACON / AC DRIVE – 3 units. 1. VACON Type: X4K40400C 2. VACON Type: XX4K440075C 3. AC DRIVE Type: X4K40075C1 8. AC DRIVE Type: X4 – 1 unit.

Condition: like new (used), Rittal Enclosure Cooling Unit TopTherm SK 3302.9540 Manufacturer: Rittal GmbH & Co. KG Rbsdpfx Aheyr Acdevsw Series: TopTherm Device Type: Enclosure Cooling Unit Model: SK 3302.9540 Item Number: 33029540 Supply Voltage: 400 V Frequency: 50 Hz / 60 Hz Phases: 3~ Nominal Current: 3.8 A (50 Hz) Starting Current: 7.5 A Protection: 6.3 A Application: Air conditioning and cooling of control cabinets in industrial installations Condition: unused, original packaging on pallet

Condition: like new (used), Steinmeyer Ball Screw 3526.512/25.40.728.1122 P5P Manufacturer: August Steinmeyer GmbH & Co. KG Component: Ball screw / ball screw shaft Type: 3526.512/25.40.728.1122 P5P Rbsdpeyr Ab Tjfx Ahvjw Precision class: P5P Design: Ball screw shaft with nut Condition: New, in original packaging Packaging: Wooden crate with protective packaging Application: Precise linear movements in machine tools, automation systems, and CNC equipment Location: Altenglan

Condition: like new (used), PILZ Safety Controller PNOZ m B0 772100 Base Unit Manufacturer: Pilz GmbH & Co. KG Type: Base unit safety controller Series: PNOZmulti Model: PNOZ m B0 Article number: 772100 Internal reference: 90010021010 Design: Base unit for modular safety control system Rbjdpfx Aeyrz Ufjhvjw Display: Integrated display Status indicators: Power, Run, Diag, Fault Mounting: DIN rail mounting

Condition: new, Radio remote control / joystick transmitter / transmitter / receiver: 1. Radio remote control / joystick transmitter / transmitter Type: DRC - JD2 with 4 batteries (new). 2. Transmitter type: DRC - 10 2ST D3 - 2 units (new). 3. Receiver type: DRC - MP D3 (new). 4. Circuit board type: DRC - DR D3 (new). 5. Electrical enclosure with receiver type: HBC FSE516 6. Receiver type: RC - E10 7. Radio remote control / joystick transmitter / transmitter - 2 units: Type: FSS760 - 40 Type: 716 - K 12973 8. Radio remote control / joystick transmitter / transmitter - 2 units: Type: F24 - 60 TK Redpfx Ahoyuy S Uevebw 9. Radio remote control / joystick transmitter / transmitter - 2 units: Type: F25 - 6D

Condition: refurbished (used), Manufacturer: Siemens Series: SINUMERIK Type: Operator panel front Part number: 6FC5203-0AF02-0AA0 Rodpfx Aeyryggshvsbw Item number: 204558 Drawing number: 90210001109

Condition: like new (used), Screw Jack GROB RTP 502-000-8 Screw Jack RTP 502-000-8 GROB 40:23 240/01 00000 Redpfx Ahoyrydljvobw Manufacturer: GROB Antriebstechnik Type: RTP 502-000-8 Design: screw jack / lifting gear Item number: 213554 Drawing number: 90010016737 Packaging: original wooden crate Condition: unused, original packaging from warehouse clearance

Condition: as good as new (ex-display), Rittal control box new and unused. Without original packaging. ST IP66, AX 1060.000, Dimension: L600xH600xW210mm m.MPL, light gray 3 pieces in stock: - When buying 1 piece 95,-- Euro net - When buying 2 pieces 185,-- Euro net Rbodpjichi Usfx Ahvjw - When buying 3 pieces 175,-- Euro net

Condition: like new (used), Bosch Rexroth Control Valve 4WRPEH 6 C4B15P-3X/M/24A1, R901382359 Unused item from stock clearance Manufacturer: Bosch Rexroth Type: 4WRPEH 6 C4B15P-3X/M/24A1 Material number: R901382359 Valve type: Proportional directional control valve with integrated electronics Size: 6 Valve function: 4/4-way valve Actuation: Electric, with integrated electronics (OBE) Supply voltage: 24 V DC Control signal: ±10 V Nominal flow rate: 15 l/min Maximum flow rate: up to 30–40 l/min (depending on version) Maximum operating pressure: 350 bar Port pattern: ISO 4401-03-02-0-05 Mounting type: Subplate mounting Electrical connection: 7-pin connector (6+PE) to EN 175201-804 Seal material: NBR Weight: approx. 3 kg Protection class: IP65 with suitable connector Short description Rsdpfoyrx Txox Ahvobw Direct-operated proportional control valve with electrical position feedback and integrated electronics for the precise control of flow and direction in hydraulic systems. Suitable for position, speed, and pressure control applications.

Condition: excellent (used), For sale: professional defibrillator/monitor LIFEPAK 15, a highly regarded model from Physio-Control / Stryker, year of manufacture: 2017. The device powers on fully – the display, menu, and rhythm monitoring functions work correctly (as shown in the photos). Equipment and features: • LIFEPAK 15 monitor/defibrillator – REF 99577-001390 • Serial number: 45974928 • Year of manufacture: 2017 • Two LP15 MPB batteries • Integrated thermal printer • Modules: ECG, SpO₂, NIBP, CO₂ (ports visible in the photos) • Manual and AED modes • Large color display • Original side and top carrying bags Condition: Used equipment, in good technical condition. Typical signs of use on the housing, no mechanical damage. The device starts up and enters operation mode – see photos for demonstration. Ideal for: • Medical facilities • Emergency rescue services • Medical event coverage Rbodpfxoxy S I Re Ahvsw • Training and educational medical applications Viewing and testing on site possible. Courier shipping or personal pickup available.

Condition: used, Year of construction: 2000, operating hours: 5,018 h, machine/vehicle number: 002272, fuel type: diesel, Empty weight: 14.800 kg Lifting capacity: 1.000 kg Working height: 2.250 cm Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: Continental Transport dimensions (LxWxH): 5.74x2.55x4.1 Please contact PFEIFER GROUP for more information Rbsdpfsx H Id Rsx Ahvow

Condition: used, Year of construction: 1999, operating hours: 5,635 h, machine/vehicle number: 991900, fuel type: diesel, Empty weight: 39.800 kg Lifting capacity: 1.400 kg Working height: 3.400 cm Front tyres / undercarriage remaining: 50 Rbjdpfx Ajxwi Ayehvow Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 8.4x3x4.65 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2007, operating hours: 2,923 h, machine/vehicle number: 1200007107, fuel type: diesel, Empty weight: 40.350 kg Lifting capacity: 1.400 kg Working height: 3.400 cm Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Rjdpfx Aoxwi Amohvjbw Tyre brand: - Transport dimensions (LxWxH): 8.4x3x4.6 Please contact PFEIFER GROUP for more information