Used Drill Chuck for sale (8,077)

Condition: good (used), Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Drilling/Chiseling Ljdpfx Afob A Rl Ijfeta -SDS Plus: Recording -Transport case -Weight: 5 kg

Condition: good (used), Year of construction: 1985, functionality: fully functional, Equipment: lighting, rotational speed infinitely variable, type plate available, From company liquidation: Gillardon GB 30 V Year of manufacture: 1985 Automatic feed: 0.1/0.16/0.25 mm Stepless speed range from 60–1600 rpm 2-speed motor Work light 170 mm quill stroke 2900 mm reach Table size 480x560 mm – clamping surface 350x440 mm MT 3 taper – with Röhm quick-action chuck 3–16 mm Machine height 1980 mm – weight approx. 400 kg The machine runs very quietly and precisely Ltsdpfx Afsx Ncfhjfea + vices included

Condition: like new (used), Year of construction: 2018, 1 x bench drill Flott TB 10 Eco Year of manufacture: 2018 Ltjdpfx Afsx Nbmdofja In like-new condition. (Further photos and description to follow)

Condition: good (used), 1 used rapid radial drilling machine Manufacturer: Donau Model: DR 40 Z No. 1117-5 Technical Data: - Drilling capacity in solid steel ST 60: 40 mm - Drilling capacity GG 25: 50 mm - Thread cutting in ST 60: M 33 - Thread cutting in GG 25: M 45 - Drill spindle mounting: MK - Spindle diameter: 55 mm - Quill stroke: 200 mm - 18 spindle speeds: 35–1800 rpm - Drilling feeds: 0.075–0.60 mm/rev - Drill column height adjustment: 450 mm - Drilling radius min/max: 305 / 1005 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space required: approx. W 1900 x H 2800 x D 2300 mm - Weight: approx. 1800 kg Ltjdpjx Hpxpefx Affsa Technical data subject to change/errors excepted.

Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32 Speed: 60 - 1800 rpm Arm reach: 600 mm Ltsdpox Hgkvefx Affea Base plate: 100 x 1400 x 110 mm Thread cutting device Coolant system Machine lamp Quick-change holder with inserts Machine vice

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2501001, type of input current: AC, Drill Bit Grinding Machine 0313 – Simple Drill Bit Sharpening for Everyone Achieve perfect results quickly and easily, even without professional training! It’s so easy! Sharpening your drill bit is completed in three steps: 1. Clamp the drill bit in the fixture 2. Grind the drill bit 3. Point/sharpen the drill bit tip Ready in less than a minute! Before clamping the drill bit, use the rotary knob on the grinding machine to set the required drill diameter. With the appropriate collet, the drill bit is positioned against the stop in the left holder of the machine and clamped in place. Sharpening the cutting edges and pointing the tip is straightforward: power on the machine, insert the fixture with the drill into the right holder, and turn gently from stop to stop – the first cutting edge is done. Then, rotate the fixture 180° to grind the second cutting edge. Pointing the tip works the same way, using the top holder. That’s it – simply switch off the machine and unclamp the drill bit. A brilliant design combines an eccentric mechanism with a specially engineered grinding wheel, so there’s no need to worry about edge profile or clearance angle. Additionally, both cutting edges are produced with exactly the same setting, guaranteeing perfect edge symmetry. The tip angle can also be freely selected between 90° and 140° before grinding. 21 highly precise collets for diameters from 3 to 13 mm in 0.5 mm increments ensure truly concentric clamping. The service life of the grinding wheel exceeds 5,000 applications. Besides the standard CBN grinding wheel for HSS tools, we also offer a diamond grinding wheel for carbide drills. Changing the wheel takes just a few moments and two safety switches prevent unintended start-up when the machine is open. The compact design and practical carrying handle make this drill bit grinding machine ideal for mobile use. All system tools, such as collets, fixtures or hex wrenches, are stored on the machine itself—so everything you need is always at hand. Lsdpoxnzrnjfx Affjta The drill bit grinding machines are energy efficient and even fit on any desk. Drill bit sharpening without prior knowledge – clean, fast and reliable! Included: - 11 collets for whole millimeter sizes (3 – 13 mm) - 10 collets for half-millimeter sizes (3.5 – 12.5 mm) - Standard CBN grinding wheel - Machine dimensions: 290 x 200 x 180 mm - Shipping weight: 12 kg

Condition: good (used), Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer -Manufacturer: Hitachi, Rotary hammer type DH 25V with transport case -Nominal power input: 600 W -Drilling/Percussion drilling -Speed: 0 - 800 rpm -Drilling capacity: Steel 13 mm / Concrete 25 mm -Case dimensions: 445/340/H170 mm -Weight: 10.3 kg Ledpeir E Syofx Affeta

Condition: used, Year of construction: 1986, Auction item. Drilling rig in working condition. Drills to 150 meters depth. Colony cutting technique with the help of tech water. Lsdpox I Ivpjfx Affota There is a centrifugal pump that pushes the water. With 90 m. pipes (1 pipe 3 m. long) Full documents. Deutz engine. Cooled by hydraulic fluid. 200 l. capacity for the hydraulic fluid. After full engine repair was working about 6 months. Now standing one year not used.

Condition: new, These ground drills can be used behind a tractor with a 3-point hitch category I connection. The ground drill unit can be equipped with different sizes of drills. The drills are suitable for making holes up to 1 meter deep. Ltjdsx I E Rkepfx Affoa Condition: New

Condition: good (used), Year of construction: 2000, functionality: fully functional, power: 20 kW (27.19 HP), rotational speed (min.): 200 rpm, rotational speed (max.): 1,200 rpm, input voltage: 380 V, input frequency: 50 Hz, overall weight: 4,000 kg, total length: 3,500 mm, total width: 2,000 mm, total height: 3,500 mm, Drilling machine for stone, marble, or granite. Suitable for small to very large diameters up to 1000 mm. Several drill bits are included with the machine. Ljdpfx Aox I Eyxeffeta

Condition: good (used), Year of construction: 1994, functionality: fully functional, Equipment: lighting, rotational speed infinitely variable, type plate available, From business liquidation: Gillardon GB 30 V Year of manufacture 1994 Automatic feed 0.1/0.16/0.25 Infinitely variable speeds from 60–1600 rpm RPM counter 2-speed motor Work light 170 mm quill stroke 2900 mm arm reach Table size 480x560 mm – clamping area 350x440 mm MK 3 taper – with Röhm quick-action chuck 3–16 mm Machine height 1980 mm – weight approx. 400 kg The machine runs very smoothly and precisely + vise Ltedpfx Afjx I A Iasfsa

Condition: used, tool clamping area 200x55x195 mm weight 0,01 t Ltsdjgqg Rujpfx Affoa - Multifix tool holder, 5 pcs. like new, 2 pcs. less used. --- price per piece ----

Condition: good (used), Core drill, crown drill, masonry drill, core drilling machine, diamond core bit, drill bit Ljdpsb A Sm Aofx Affota -Core drill bit: Ø 150 mm -Drill bit length: 470 mm -Quick-change mount -Weight: 5 kg

Condition: used, tool clamping area 300x55x85 mm Ltsdjgqlkgspfx Affja weight 0,01 t - Multifix tool holder, 5 pcs. like new, 2 pcs. less used. --- price per piece ----

Condition: good (used), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck Ltedsb A Smwjpfx Affoa -without: interchangeable jaws -Mouth size: Ø 225 mm -Cone: Ø 106 mm -Weight: 28 kg

Condition: used, diameter 315 mm 3-jaws chuck without jaws. Ltedpfxeu Sbiis Affja

Condition: good (used), Tool holder, milling tool holder -Recording: SK40 -Inner diameter: 25 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers Lodpfjb A Ifqjx Affsta -Weight: 3.5 kg

Condition: used, diameter 250 mm Ltjdpfxoicbq Ns Affoa

Condition: good (used), End mill, shank mill, milling cutter Ltodpfx Aob A Srusffja -Four-cutter -Roughing end mill -Diameter: 16 mm -Usable length: 20 mm -Type: HSSE -Quantity: 17 pieces -Sale: only complete set -Weight: 4 kg

Condition: good (used), End mill, shank mill, milling cutter -Four-cutter -Roughing end mill -Diameter: 25 mm -Usable length: 55 mm -Corner radius: 4 mm -Type: STG-160 Quantity: 16 pieces -Sale: only complete set -Weight: 6.5 kg Ltjdpfx Afsb A Srlsfea

Condition: good (used), Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: SK40 -Clamping sleeves: 28 mm Price: complete Quantity: 10 available Ljdpfsb A Stfox Affota -Weight: 15 kg

Condition: good (used), Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: SK40 -Clamping sleeves: 28/85 mm Ltjdpfsb A Stcsx Affsa Price: per piece -Quantity: 16x Available -Weight: 1.2 kg/piece

Condition: good (used), End mill, shank mill, milling cutter -Two-knife -Finish cutter -Diameter: 14 mm -Usable length: 30 mm -Corner radius: 0.7 mm -Carbide: equipped -Quantity: 88 pieces Price: per piece -Weight: 8 kg Lodeb A I Rbjpfx Affota

Condition: good (used), Drill bushings -10x Type: Z10W/36/15 -10x Type: Z10W/36/30 -9x Type: Z10W/36/10 -9x Type: Z10W/36/9 -10x Type: Z10W/36/14 Ltsdob A R Naspfx Affja Price: complete -Weight: 4 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Röhm, Top jaw set, rotary jaw set, 4-piece, for chuck size Ø160 mm, 2 sets -Jaw width: 18 mm -Dimensions: see photo technical drawing Lodsx Hfhyjpfx Affota -Price/Fee: complete -Overall dimensions: 160/70/H50 mm -Total weight: 1.9 kg