Used Drill Chuck for sale (8,269)

Condition: excellent (used), Item description: Three-jaw chuck SMW power chuck HFK-N-260-72 Gusdpfx Ajzltzvea Eed ----- Condition of item: Good condition. Internal number: PS5

Condition: excellent (used), functionality: fully functional, Working diameter: 2–40 mm. Minimum and maximum point angles: 40–180°. For right- and left-side cutting tools, 1–12 cutting edges. For sharpening twist drills, step drills and tap drills. A wide range of accessories and a user manual for the machine are included. Clean and good condition Gusdpfxezlrmdj Aa Ejd

Condition: used, Year of construction: 1990, taper MK 3 serial number 4131 throat 1000 mm Gedpfx Aszkbqvsa Ejud documentation ja clamping hydraulisch kW weight of the machine ca. 2,6 t

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. Gujdpfxsh Ek H Ss Aa Ejd BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: good (used), Year of construction: 2015, total width: 1,800 mm, total length: 3,700 mm, total height: 4,300 mm, overall weight: 14,000 kg, Maximum drilling capacity in steel: 75 mm Length:3700mm Width:1800mm Height:4300mm Weight:14000kg Guedpfx Aajzi S Snj Eod Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). Guodpfjv Aalysx Aa Ejd - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 50 mm throat 400 mm bore stroke 250 mm taper MK 4 MK table-size 705 x 580 mm feeds 0,1 - 0,2 - 0,3 - 0,4 mm/U turning speeds 60 - 1205 U/min Gedpfjzlkv Djx Aa Esud total power requirement 4,0 KW weight of the machine ca. 0,85 t dimensions 1,2 x 0,8 x 2,55 m Column drilling machine with: - Power feed - Left/right rotation - Coolant pump - Machine light

Condition: good (used), Storage location: 3111 Manufacturer: IXION Year of manufacture: 1998 Type / Model: BT 15 Machine number: 186477 Drilling capacity: up to 16 mm Spindle mount: Drill chuck B16 Speed range: 480 to 3,800 rpm Table: 290 x 350 mm Gsdpfxjzcuzao Aa Ejud Overhang: 225 mm Stroke: 100 mm Head height adjustment: 300 mm Distance table-chuck: 70 to 370 mm Footprint: 290 x 440 mm Connection: 0.8/1.0 kW Accessories/Equipment: Drill chuck Condition: good Weight: Dimensions: 290 x 440 x 700 mm

Condition: ready for operation (used), ARBOGA UM 3508 / Drilling and milling machine with Heidenhain digital display Gedpozlg I Nofx Aa Ejud -Drilling capacity in steel: 35 mm -Thread cutting: M 24 -Travel ranges X/Y/Z: 450x250x500 mm -Table dimensions: 650x270 mm -Cross slide table -Automatic feeds -Heidenhain digital display -Speed range / gear: 70-2160 RPM -Automatic feed -Overhang: 320 mm -Drilling depth: approx. 170 mm -Drilling/milling head: swiveling -Drilling depth stop -Drive power: 1.5 kW -Control panel -Indexing head -Machine feet -Documentation -Dimensions: L x W x H: 1.2 x 1.1 x 1.9 meters / Weight: approx. 800 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2013, operating hours: 44,789 h, machine/vehicle number: 68023, drilling depth: 2,000 mm, feed length X-axis: 1,250 mm, feed length Y-axis: 1,250 mm, SN: 68023, working area X/Y/Z 1,250 x 1,250 mm, W-axis (drilling and milling unit, horizontal) 2,000 mm, A-axis (drilling and milling unit, swiveling) -25° to +15°, B-axis (rotary table) 360°, table load 15,000 kg, with reference plate, manufacturer Pfleghar, 6-part, overall dimensions 1,800 x 1,800 x 40 mm, grid 50 M16 Ø 24, consisting of 3x type TF-600 x 800 x 40 and 3x type TF 1,000 x 600 x 40, max. drilling depth 1,800 mm, drilling diameter 5-50 mm, machine weight 48,000 kg, pit-mounted, tool holder SK50, tool changing system, exchange magazine, 24 slots, control system, manufacturer Heidenhain, released BS control system version 73.247, machine operating hours 44,789. The price is quoted as a net ex-works price. Dismantling, lifting and loading will be carried out at the buyer's expense and risk. Gujdpfx Aaezld Ugj Esd

Condition: used, Year of construction: 1980, machine/vehicle number: 17209, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, spindle mount: MK 3, height adjustment type: mechanical, rotational speed (max.): 1,750 rpm, rotational speed (min.): 130 rpm, total height: 2,000 mm, throat depth: 290 mm, Equipment: rotational speed infinitely variable, Used column drill press Manufacturer: Alzmetall Type: AB 3 ESV Machine number: 17209 Year of manufacture: 1980 Drilling capacity in cast iron: Ø 35 mm Drilling capacity in steel (diameter): 28 mm Spindle speed via 2 gear stages, 2 motor speeds, and continuously variable via a variator gear 130 - 1750 rpm Spindle taper: MK 3 Feed rate: 0.1; 0.2; 0.3 manually/automatically mm/rev Distance spindle/table min/max: 80 - 680 mm Table clamping surface: 500 x 370 mm Table rotatable: 360° Drill table adjustment: 600 vertical mm Guodezldquepfx Aa Eed Overhang: 290 mm Quill stroke: 165 mm Column diameter: Ø 120 mm Equipment: - Coolant system - Speed indicator - Work light - Röhm Spiro quick-change chuck 1-13 mm - Ejector on chain - Emergency stop button Machine weight approx.: 285 kg Machine dimensions approx.: 0.9 x 0.6 x 1.9 m (LxWxH)

Condition: excellent (used), Year of construction: 1972, machine/vehicle number: 42 473,

Condition: like new (used), functionality: fully functional, Hydraulic 3-jaw chuck, Samchully, diameter 300 mm and diameter 400 mm, and hydraulic clamping cylinder, type: Y-1550 RE. Sold individually or as a set! Gjdpszlcc Nofx Aa Esud

Condition: good (used), FORKARDT Three-jaw manual chuck with wedge bar system Type: F315 No.: 1403959 with flange for KELLENBERGER cylindrical grinding machines Equipment: 1 set basic jaws 1 set hardened jaws Gjdpfx Aaezi Aqzj Eoud 1 piece flange D: 300 mm ISO 50, M24 1 set operating wrench 1 piece operating manual Condition: good, fully functional

Condition: ready for operation (used), 1 Threaded-spindle drill press FLOTT NNP 15-II without a vise Godpfx Aoi Aputoa Esud

Year of construction: 1987, condition: used, 1 Bench drill ALZMETALL AX 3SV, serial number 5739, year of manufacture 1987. Guedsi Apu Topfx Aa Esd

Condition: used, Year of construction: 2011, total width: 1,500 mm, total length: 3,000 mm, total height: 1,750 mm, Colour: White Empty weight: 450 kg Gusdezizqgjpfx Aa Ejd - Year: 2011 - Documentation available: No - CE certificate present: No - Serial number: 11060282 - Main motor power [kW]: 1.3 - Table length [mm]: 2000 - Table width [mm]: 520 - Max. drilling stroke [mm]: 60 - Number of spindles [pcs]: 27 - Spindle speed: Manual - Min. spindle speed [rpm]: 2820 - Max. spindle speed [rpm]: 2820 - Distance between spindles [mm]: 30 - Workpiece clamps [pcs]: 10 - Workpiece support/Guide: Traverses - Drills included: Yes - Voltage [V]: 400 - Current consumption [A]: 3 - Fuse [A]: 16 - Power [kW]: 1.5 - Transport dimensions: 3000mm x 1500mm x 1750mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and travel paths Tool holder SK 40 Table dimensions mm 4000 x 800 Number of T-slots 6 Distance between T-slots mm 140 Distance between spindle bottom edge min. mm 140 Table top edge max. mm 740 Drilling radius min mm 540 max. mm 1590 U-axis travel path mm 2600 Y-axis travel path mm 1050 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 400 Cutting values Drilling capacity into solid material St 60 mm 40 GG 22 mm 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Feed rates infinitely variable mm/min. 5 - 2000 Feed force N 12000 Accuracy Positioning accuracy X, Y axis up to 1200 mm mm ± 0.075 Repeatability X, Y axis mm ± 0.03 Positioning accuracy Z axis mm ± 0.05 Repeatability Z axis mm ± 0.03 Positioning accuracy W axis mm ± 0.05 Repeatability W axis mm ± 0.03 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen backlit, easy to read from all sides Position information: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, cutting data suggestions depending on material Tool management: max. 500 tools Sub-program technology: yes Machining cycles: cycles for centering, drilling, thread cutting, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking / chip removal: possible for drilling cycle Drilling patterns: row of holes, circle of holes, matrix Basic software: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually touching the workpiece for: - any clamped right-angled parts - any clamped round parts - mediation of cast and burnt parts - Angular position detection for round parts by touching - reference edges or surfaces Data interfaces USB interface Painting (new painting) Standard painting, two-component textured paint Machine upper part light gray RAL 7035 Machine lower part signal blue RAL 5005 Documentation Operating and programming instructions Electronics circuit diagram Spare parts drawings Guedpfev If T Tjx Aa Ejd Test report for mechanics, electrics and safety equipment

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Guodpfx Aezlbrvea Eed Equipment and technical data: Complete in standard configuration with: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blowing, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication system - X-axis NC controlled, with working length 1300 mm, traverse speed max. 105 m/min - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5-40 mm - Dowel insertion overhang of 7-20 mm adjustable via mechanical digital counter, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically adjusted with insertion overhang - Closed gluing system with 6 bar gluing pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - Selector switch GLUE/WATER for flushing the gluing system with: 1 stainless steel container for 7.5 kg of glue and 7.5 l of water - Control lamp for glue residue level indication in the glue container - 1 left-hand side stop, 1 right-hand side stop, and 1 center stop (all removable) - 4 start buttons for individual operation with 1-4 workpieces - 4 pneumatic inclined clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 dust extraction funnel, connection Ø 80 mm - 1 TCT control with: Industrial PC, incl. soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" touchscreen capacitive, operating system: WINDOWS 7 - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas can be assigned with different programs, graphical workpiece representation, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel insertion station (programmable from 5-40 mm), traverse speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit, drilling from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical inclined clamping cylinders 10° with bracket - 1 keyboard with bracket Availability: by arrangement

Condition: used, Used machine Fitting drilling machine Cup band drilling machine Fitting drill (Grass drilling pattern) 6 drilling spindles in series (32 pitch) (one spindle of the 8 drill head is defective) 4 further drilling spindles upstream for cup drillings Pneumatic hold-down stop depth adjustment Connection: 16 A / 380 V Motor: 1.5 kW Weight approx. 100 kg Dimensions: 3,130 x 1,060 x 710 mm Availability: short term Storage location: Flörsheim Gusdpfxezlbrce Aa Esd

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Universal dowel drilling machine with drilling from below Godpfx Aezlbqfea Eeud heavy cast iron table pneumatic swivel mechanism

Condition: good (used), Year of construction: 2019, Throughfeed CNC machine FELDER GROUP FORMAT4 CREATOR 950 (year 2019) with glue and dowel insertion, 12 kW HSK-F63 milling unit, integrated Ø 120 mm saw, dowel unit, and feed speeds up to 90 m/min represents a compact solution for precise milling, drilling, and panel sizing of wood. Key Technical Advantages - Occupies only 5 m² of space Ideal for workshops with limited space. - Easy clamping and programming Fast and intuitive operation, even for less experienced users. - Compact, powerful, and fast Perfect for smaller workshops seeking professional results. Advanced Features - Glue and dowel insertion unit - 12 kW milling unit (up to 24,000 rpm) - Automatic workpiece length measurement - Automatic tool changer (linear tool magazine with 4 positions) - Drilling from all five sides - Groove cutting with integrated saw blade - Processing from all four sides of the workpiece - Door panel machining Drive Unit - Spindle: HSK F63 - Number of axes: 3 Travel Distances - X-axis travel: 3000 mm - Y-axis travel: 950 mm Gujdpfx Aowyvgasa Eed - Z-axis travel: 80 mm Tools - Maximum tool weight: 7.5 kg Worktable - Table load capacity: 130 kg Additional Equipment - Online remote service support package - Automatic central lubrication PRICE EXCLUDES VAT.

Condition: excellent (used), The Gillardon GB50V column drill is a reliable and robust German-made machine, designed for professional use in workshops, metalworking, and mechanical engineering. With a drilling capacity of up to 50 mm, the column drill ensures maximum precision and versatility. The sturdy metal frame, the spacious swiveling worktable, and the integrated cooling system make the GB50V ideal for intensive use. Guedpfx Aaeymra Uo Eed Specifications Drilling capacity: Up to 50 mm in steel, 60 mm in cast iron. Spindle holder: MK4. Speed: Steplessly adjustable from 35 – 950 rpm. Feed: 0.1 / 0.16 / 0.25 mm per revolution. Table: round 600 mm with T-slots, swiveling. Maximum spindle distance to table: 740 mm. Motor power: 2.2 – 4.0 kW, 400V. Weight: approx. 850 kg.

Condition: excellent (used), For sale: MAKA LB1 long-hole and dowel drilling machine in top condition, from a one-man carpentry shop. Dowel hole drilling unit: Gusdszk Typopfx Aa Ejd Pitch: 16, 22, 25, 32 Drilling depth: 145 mm Long-hole length: 240 mm Vertical adjustment travel: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Dust extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 250 kg Immediately available. Loading with a forklift is possible. Upon request, I can arrange transport for the buyer via a freight forwarder, with the buyer covering the actual costs. You will receive an invoice with VAT shown. Asking price: €1,300 net + 19% VAT.

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, Two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW Guodev Npw Eopfx Aa Ejd Compressed air connection 6 bar Fully automatic pneumatic control with foot valve Additional switch for "chip removal" program T-shaped drill head with 7+2 drill spindles, 32 mm pitch Drill shank diameter 10 mm 90° pivoting with locking mechanism Chassis