Used Dressing Device for sale (13,041)

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. Lodpfx Afoxf Up Ue Eoru The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: used, Year of construction: 1972, Technical details: grinding wheel diameter: 400 mm total power requirement: 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1,5 x 1,4 x 1,3 m Dressing Grinder for gears REISHAUER AM max. width of grinding wheel 104 mm max. dia. of grinding wheel 400 mm max. module 7 min. module 0,5 pressure angle 10 - 30 ° Lrodpewi Ni Tsfx Af Esu grinding worm dia. 270 - 400 mm width of grinding worm 62/84/104 mm grinding worm turning speeds: at profiling 18/35/70 U/min electrics - voltage/frequency 380 / 50 V/Hz long. movement of crowning device 156 mm *

Year of construction: 2016, condition: like new (used), machine/vehicle number: MBUT M2, Technical data: Binar Quick Lift QLA 50i Manipulator Handling Device Lifting Aid Payload at full extension 50KG Height: approx. 3.4m UK boom: approx. 3.2m Projection: approx. 1.30+1.50m Lifting height: approx. 1.0-2.1m Lsdpfx Afepgmfio Esru Weight completely approx. 300kg with scissor pliers for removing small parts Swivel range 360° (via articulated arm), connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Shipping by courier or collection only by appointment

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Z-axis: 500 mm, For sale is a Garant tool presetting device, model VG1. The measuring system is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2010 Measuring range X-axis: 400 mm Measuring range Z-axis: 500 mm Measuring accuracy: 1 µm Tool holder: SK50 Transport and loading can be organized across Europe upon request and for an additional charge. Prices are subject to VAT. Lrjdpfoxf T R Rox Af Eju Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? For more information or contact options, please visit our website.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, load capacity: 2,500 kg, Dumeta CHGK-5-NDPU roller stand Load capacity 2500 kg This was a bad investment and has hardly been used, making it in mint condition. Lsdswffxiopfx Af Ejru This system is available for immediate delivery.

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19552 Specifications: Lifting capacity: 2.5 tons Span: 18 meters Remote control Ready for delivery Lsdpfxevyf Uzj Af Eeru Description:Munck overhead crane for sale.According to the owner, it has seen very little use since it was purchased in 2018.Equipped with remote control and a 2.5-ton capacity.Available for prompt delivery. Own weight: 4000 Model: Traverskran

Condition: like new (used), functionality: fully functional, 50 litres 2 pieces of 100 litres Lredpfx Afoxk Tx Sj Eeu 2x150 litres

Condition: good (used), Year of construction: 2004, gross working tank volume: 350 liters useful volume: 170 liters largest possible workpiece dimension (measured diagonally): 220mm total weight: 731kg Ljdot E R Rhopfx Af Ejru drive power at 1500 rpm: 2,6kW

Condition: excellent (used), Large flanging device Lrjdsu Nuycepfx Af Eou Make Trumpf Type CS 20 CN 20 (28202) suitable for Trumpf CS 20 and CN20 very good condition, very little used

Condition: used, Year of construction: 2006, The Neolt FT250 Manual Foam Trim Pro 250, manufactured by Neolt in 2006, is a machine with a format of 2500 mm currently in stock and located in Germany. This machine comes with a fixing bar and stand, offering a cutting width of 98 inches. It can handle a maximum cutting thickness of 30mm for foam and 3mm for Forex. The delivery terms are FCA. Format: 2500 mm Max. Size: 250 cm Net Weight: 70 kg Measurements: 280 L 33 W 120 H Equipment: with Fixing Bar and Stand Lrsdpfx Ajvfx Dmsf Eou 98 in Cutting Width, 30mm FOAM and 3mm FOREX Max. Cutting Thickness

Condition: ready for operation (used), ZEISS Rondcom 54 Form Measuring Instrument – Surface and Contour Measuring Device Max. Measuring Diameter (OD): approx. 300 mm Max. Workpiece Diameter: approx. 580 mm (depending on configuration) Max. Workpiece Load: approx. 30 kg Rotational Axis (C-axis) – Radial Roundness: 0.020 + 6 H / 10,000 µm (tolerance) Axial Runout: 0.020 + 4 R / 10,000 µm Measuring Speed (Rotation): approx. 2 – 10 rpm Centering Range: ± 2 mm Leveling / Tilting Range: ± 1° Resolution (Rotary Axis): 0.025° Z-Axis (Vertical Travel): 300 mm (optionally expandable to 500 mm) Straightness Deviation Z-Axis: 0.12 µm / 100 mm, 0.20 µm / 300 mm Parallelism Deviation (relative to rotary axis): 0.8 µm / 300 mm R-Axis (Radial Movement) – Travel: 170 mm Straightness Deviation R-Axis: 0.8 µm / 150 mm Parallelism Deviation (C vs. R): 1 µm / 150 mm Linear Scale (on R-Axis): Yes, available as standard (for higher accuracy) Measuring Force (stylus / probe): adjustable, 30 – 100 mN Measuring Range (probe): ± 1000 µm (adjustable) Detector Resolution: up to 0.001 µm (1 nm) Standard Stylus: Length L = 54 mm, Ball Ø = 1.6 mm carbide Power Supply: 100 – 240 V AC, 50/60 Hz Power Consumption: approx. 600 VA Compressed Air Requirement: 0.3 – 0.7 MPa Weight (approx.): approx. 170 kg You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. Export customers can be issued a net invoice, provided a valid VAT ID number is supplied. Sale subject to prior sale. Lrsdpfjxhd E Dex Af Esu Visit our shop to view our other offers as well. All company names and trademarks are property of their respective owners and are used for identification and description purposes only. Technical data may vary and errors in item descriptions are subject to change.

Condition: used, Year of construction: 2006, Serial number: 20000xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20082 Description:2006 Palfinger crane.The slewing function was a bit slow the last time it was used.The crane has not been in use for 4–5 years.Generator not included.Ready for delivery. Own weight: 1 Model: PC 2300 kran Lrjdpfx Asv U Tbref Eeu

Condition: used, Year of construction: 2013, functionality: unexamined, overall weight: 290 kg, Sartorius EWK 3010 WS 60kg BL Ledpfx Afew Et E Dj Ejru Belt L/W/H 130/70/60 cm Control unit L/W/H 35/50/160 cm

Condition: good (used), Year of construction: 2010, functionality: fully functional, new container with completely new layer PU-cover with ca. 6mm cover thickness usable volume: 165 liter trough inner measures: 1100mm x 460mm x 525mm empty weight: ca. 850kg motor speed: 1500 rpm Lodpfxot Ahqyj Af Eoru sound insulating cabinet extern dimensions: 1900mm x 1250mm x 1550mm band filter device Seitz

Condition: excellent (used), Collet set MK 4 Make Horma 17 pieces from 4-25 mm in diameter Lrjdpoupzbljfx Af Eeu (28562) in carrying case

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer Lrjdpfjvfxqyex Af Eju 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Condition: good (used), Coolant Filtration System KNOLL KF 600 / 1500 - CE marking - Coolant tank Lrjdoxgubyjpfx Af Esu - Paper band filter - Control unit - OP 3 - Coolant pumps Dimensions: LxWxH 2.4x1.2x1.5 meters / Weight 600 kg Errors and omissions excepted

Condition: good (used), Load hook, retractable safety device, load securing device -Load securing device: Type 16 -Load capacity: 500 kg -Rope length: 6.7 m -Note: not for persons -Dimensions: 720/240/140 mm Ljdpowwqqnofx Af Ejru -Own weight: 12.8 kg

Condition: used, Used olive drilling machine Electro-pneumatic control with foot pedal 7 stops left/right with scale Height adjustable with handwheel L/W/H: 3400 mm / 700 mm / 1800 mm Weight approx. 90 kg Without warranty Lsdpfxjxgp U Uo Af Ejru

Year of construction: 2001, condition: good (used), bar diameter min. 18mm / max. 63mm Ledpsi Dagcjfx Af Eeru bar lenght min. 1000mm / max. 4200mm

Condition: excellent (used), Coolant mixer Emulsion mixer Nimatec Lredpfx Afewf Ht Ie Eou Stock number (28599) 1/2-inch water supply connection

Condition: excellent (used), Inside micrometer tManufacturer: Mitutoyo Lsdpowykicefx Af Esru Type: 511-176.05 (28651) Measuring range: 160 - 250 mm

Condition: excellent (used), Internal precision measuring device Brand Mitutoyo Measuring range 35-60 mm (28578) Ljdpjvwau Refx Af Eeru Type 511-168

Condition: excellent (used), Mitutoyo internal precision measuring instrument (28577) Type 511-167 Measuring range 18 - 35 mm Lodpfovu T Apjx Af Ejru

Condition: excellent (used), Tool setting device Lrsdpfx Afshc I Uve Eou (24310) For SK 50