Used Dowel Hole Boring Machine for sale (84,553)

Condition: used, Year of construction: 1998, Technical details: spindle diameter: 130 mm x-travel: 2750 mm y-travel: 2530 mm z-axis: 2320 mm w-axis: 700 mm B-axis (table): 360.000 x 0,001 ° spindle motor: 50 kW spindle taper: ISO: 50 spindle turning speed range: 1,6 - 1600 U/min Table dimensions: 1800 x 2000 mm max. workpiece weight: 8000 kg Fpjdpfx Asvb Du Ajfnsb weight of the machine ca.: 37 t total power requirement: 50 kW dimensions of the machine ca.: 5,9 x 7,2 x 5,1 m Machine equiped with CNC HEIDENHAIN TNC 426 *

Condition: excellent (used), KOCH Dowel Inserting Machine Type DL-80 Machine No.: A0005/6390 Workpiece Dimensions: Workpiece length: 180 - 2500 mm Workpiece width: 70 - 800 mm Workpiece thickness: 12 - 40 mm - with glue application and dowel insertion station - with 1:1 glue pump - 1 vibratory feeder with control mirror per side - lateral dowel hole air nozzles - mechanical digital display for height adjustment - PLC control - machine bed with linear guides 1 x NC axis for positioning Configuration of glue application and dowel insertion station: 6 single dowel tools per side Dowel diameter: 8 mm Dowel length: 35 mm Dowel projection: 7-14 mm Pitch: 32 mm Minimum dowel center distance: 32 mm; maximum: 736 mm Tolerances for wooden dowels: Dowel length: +/- 1 mm Dowel diameter: +0.1 / -0.2 mm Electronic Glue Monitoring ELC The monitoring device is installed before the glue valve. With every working cycle (glue shot), the glue flow is measured. If no glue is dispensed from an activated glue valve, the machine interrupts its cycle and indicates the relevant glue valve on the control cabinet. 12 x Electronic Glue Monitoring ELC, one per glue valve Flip-up belt extension Workpiece alignment station in belt infeed for minimum workpiece width of 70 mm, plus alignment for narrow parts Fodox Ez A Repfx Afnopb Electrical connection rating: 400 V, 50 Hz, 3 phase Voltage fluctuation: max. +6 to -10% Air connection: 7 bar Extraction air speed: approx. 30 m/sec Ambient temperature at installation site: min. 10° C (50° F), max. 40° C (100° F)

Condition: excellent (used), Year of construction: 1982, Panhans Mortising Machine Type: 116 – School Model – Fpjdpjx Nrhrjfx Afnjb Two-hand operation Dowel hole drilling unit: spacing 16, 22, 25, 32 mm Drilling depth: 145 mm Mortise length: 240 mm Height adjustment stroke: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Hold-down: manual Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg Location: from stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2018, Used machine Fpsdpfx Afsxllwconsb Year of manufacture: 2018 Features and technical data: - Drill depth adjustment via maintenance-free linear guide - Efficient and economical operation thanks to rapid feed system, eliminating the need for tedious cranking - Smooth and stepless movement of the drilling unit - Height adjustment with fine tuning and gas pressure cylinder for weight compensation - Cross travel and height adjustment with scales and adjustable stops - Vibration-free operation due to robust steel construction - Drill depth adjustable using scale and stop - Drill head height adjustment can be fully used for vertical slotting - Large, high-quality cast iron table with ground surface - Motor power: 1.5 / 1.9 kW - Voltage: 400 V - Speed: 1,400 / 2,850 rpm - Westcott drill chuck: 0–20 mm - Maximum drilling depth: 220 mm - Drilling width: 340 mm - Height adjustment: 145 mm - Drill head swivel range: -60° to +60° - Drill table size: 595 × 315 mm - Table extension: 2 × 200 × 220 mm - Drill table height: 830 mm Dimensions: 1,200 × 1,050 × 1,300 mm Weight: approx. 240 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Facom foratrice Through-hole drill f-v3r-2l-3f+2tagr1 used 2015 Brand: Facom foratrice Model: Through-hole drill f-v3r-2l-3f+2tagr1 Description: Through-feed drill F-V3R-2L-3F+2TAGR1 All heads and saws are screw-adjustable with mechanical indicators. Drilling depth is controlled electronically. Minimum workpiece length: 300-350 mm Maximum: 2000 mm Automatic feeder Fpodsx Rd Elepfx Afnsb Bsbtt Sov U Uw Ujx Nteda Double-sided cutting with angle adjustment Double-sided drilling with angle setting 3 drill heads top + 2 wheels + 2 rear All heads have angle adjustment Electronic position markers I can send a video via WhatsApp The machine is operational and connected; you can test it 2015 Year: 2015

Condition: used, Year of construction: 2000, Table size: 580 x 280 mm Drilling table height: 800 mm Drilling depth: 150 mm Drilling length: 225 mm Height adjustment: 180 mm Swivel range: 2x 45° Drill speed: 2800 rpm Wescute drill chuck: 0-20 mm Extraction port diameter: 80 mm Motor power: 2.2 kW / 3 HP Space required: 850 x 1000 x 1050 mm Weight: approx. 240 kg Storage location: Supplier Fpodpfexya H Isx Afnob

Condition: used, Technical details: spindle diameter: 130 mm x-travel: 2190 mm y-travel: 1520 mm z-axis: 1520 mm w-axis: 1000 mm table surface area: 2000 x 1800 mm workpiece weight: 8 t spindle motor: 18 kW spindle taper ISO: 50 spindle turning speed range: 4,5 - 900 U/min faceplate diameter: 785 mm rapid traverse: 5 m/min total power requirement: 40 kW dimensions of the machine ca.: 5,5 x 6,9 x 5,2 m weight of the machine ca.: 35 t Fedpjvclrxefx Afnjpb Machine was retrofitted in 2023 with HEIDENHAIN TNC 360 CNC control - inf. variable spindle spped - 4 x 90° table positioning - diverse toolholders - dDust exhauster *

Condition: excellent (used), HOLZMANN long hole drilling machine with movable table and 32 mm indexing, table additionally tiltable. Fedpfsx Rbk Esx Afnepb

Condition: excellent (used), Year of construction: 1988, Gebr. Panhans Mortising Machine Type: 116 - School Model - Dowel hole drilling unit: pitch 16, 22, 25, 32 mm Two-lever operation Mitre angle stop Drilling depth: 145 mm Mortise length: 240 mm Height adjustment stroke: 135 mm Motor power: 1.5 kW Speed: 2800 rpm 2 hold-downs: manual Fodex Nrg Uspfx Afnspb Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg Location: from stock 54634 Bitburg - Immediately available -

Condition: as good as new (ex-display), machine/vehicle number: G-V7-LBM2200-2S-RL-400-Schweiz, Exhibition machine Hans Schreiner long hole drilling machine with one-hand operation. Optimum work thanks to fixed table and movable drill head. Standard with left/right rotation, dowel drilling device and 2-speed motor including tool compartment, eccentric clamp, miter stop Technical data: Motor output 3.8 kW Voltage 400 V Table size 570 x 300 mm Max. drilling depth 150 mm Side travel 290 mm Height adjustment 140 mm Dowel drilling device 16, 20, 22, 25 mm hole spacing Max. drill holder 20 mm Speeds 1400/2800 rpm Weight 140 kg Suction connection 100 mm Packaging dimensions 855 x 600 x 1160 mm Fpjdpfsvw Edqox Afnob Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Year of construction: 1996, functionality: fully functional, SECOND-HAND MULTIPLE BORING MACHINE CAMAM MOD. FMV/4U - 4 BORING UNITS - N. 4 independent boring units - Control panel - Year 1996 - CE rules Fjdpox N S Tbofx Afnspb

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 375 mm, travel distance Y-axis: 230 mm, spindle speed (max.): 1,700 rpm, spindle speed (min.): 115 rpm, type of input current: three-phase, overall weight: 200 kg, table length: 700 mm, table width: 190 mm, power: 0.75 kW (1.02 HP), distance table to spindle center: 405 mm, WMD32G - ROGI Gear-Driven Milling and Drilling Machine Drilling Capacity ----- 32 mm Face Milling Capacity ----- 63 mm End Milling Capacity ----- 16 mm Work Table Dimensions ----- 700 x 190 mm T-Slot Dimensions ----- 12 mm Spindle Taper ----- ISO30 Max. Distance Spindle - Table ----- 405 mm Spindle Travel ----- 75 mm Fpodpfx Ajx N Ndqofnjb Head Tilting ----- Left / Right 45 Degrees Table Longitudinal Travel ----- 375 mm Table Cross Travel ----- 230 mm Speed Range 115 - 1700 rpm Weight ----- 200 KG Motor ----- 750W AC Voltage ----- 230V (INVERTER) INCLUDES * 3-axis digital readout SINO * Floor stand * Digital depth stop * ISO30 milling arbor including 6 collets * Drill chuck with shank DIN2080 / ISO30 * Left / Right switch * Spindle guard * Drift key

Condition: good (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, Toolmaking dissolved through company takeover Fpjdpfjt Stwwox Afnsb

Condition: used, Year of construction: 1990, Dowel hole drilling unit: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Fedox I Aikopfx Afnspb Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Hold-down device: manual Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg

Condition: excellent (used), Year of construction: 2007, Gebr. Hess LLB 300 slot mortising machine – school model – Fpedpfxox Nrguo Afneb Drilling width: 240 mm Drilling depth: 180 mm Drilling stroke: 160 mm 2-speed motor 1400/2800 rpm instead of 1.5 – 1.9 kW Motor speed: 2800 rpm Chuck mount: 20 mm Table size: 600 mm x 320 mm Pressing system: 2 eccentric levers Weight: 246 kg 1 piece 2-speed motor 1400/2800 rpm 1 piece stop gauge 90° 1 piece horizontal drilling grid system with 4 rows of holes: 16, 20, 22, 25 mm; with Bowden cable control 2 pieces eccentric pressers with column Single-lever operation Location: ex stock 54634 Bitburg – immediately available –

Condition: repair required (used), Year of construction: 1996, For sale is an IXION TL 601 deep hole drilling machine. Unfortunately, the machine is experiencing electrical problems. Constants need to be reset by a technician, and the backup battery needs to be replaced. Fpedpfx Ash Dpv Refnob New LCD display was recently installed. New LED display. Machine No. 950192 Year of manufacture 1996 Manufacturer: Maschinenfabrik IXION Otto Hafner -Travel paths + Quill Tl 601 (Z) 600 mm + Vertical drilling unit (Y) 300 mm + Transverse table (Table surface 1200 mm x 600 mm) (X) 700 mm + In drilling direction (W) 1000 mm -Clamping table + Table surface (standard) 1200 mm x 600 mm + Table load (T1200) 1000 kg -Tool holder + SK 40 holder according to DIN + Pull stud 69871 According to DIN 69872 -AC main spindle drive 3.0 kW + At 100% duty cycle, S1 5.5 kW At 50% duty cycle, S6 7.5 kW +Spindle turning speed Directly programmable 100-4000 rpm Performance: +Drilling capacity in steel 2312 D 32 mm +Tapping M24 -Weight / Dimensions Weight 2500 kg Length approx. 4230 mm Width approx. 1885 mm Height approx. 1870 mm All prices plus VAT We can deliver and commission the machine. All prices plus VAT Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours?

Condition: new, Year of construction: 2023, AVAILABLE ON STOCK ! CNC drill and dowel inserting machine for fully automatic bore, glue and dowel driving. The drill glue and dowel machining center with compactness, efficiency, quality and flexibility. Short introduction: • Precise drilling and dowelling with fast cycle times • Universal CNC controlled drilling and dowel inserting machine Fodsm E Uf Ujpfx Afnspb • Glue shot monitoring via GIC • Closed gluing system • Suitable for panel and solid wood processing • Optional additional horizontal and vertical drilling spindles • Optional additional units for grooving and routing • Lowerable stops for flexible and optimized parts handling, also for larger workpieces (option) • Relieves CNC machining centers • Optimal complement to nesting machines and CNC machining centers

Condition: good (used), Year of construction: 2014, functionality: fully functional, ✅ Brand: FERMAT ✅ Type: CNC Boring Machine Fedpfx Aswl Er Nofnspb ✅ Model: WFT 13 R CNC ✅ X Travel: 2000 mm ✅ Y Travel: 2000 mm ✅ Year: 2014

Condition: used, Hole rows + fitting drilling machine LAUTENSCHLÄGER Meplamat 300 pneumatic hold-down device, Fpjdevtm Ayopfx Afnsb pressing device, stop rulers

Condition: used, Year of construction: 1994, Dowel hole drilling unit: spacing 16, 22, 25, 32 Drilling depth: 145 mm Fpodpfx Afox I Aiqsnsb Slot length: 240 mm Height adjustment travel: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Hold-down clamp: manual Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D Fpedpowdta Eofx Afnob - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Condition: used, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 120 rpm, table length: 550 mm, table width: 320 mm, spindle mount: MK 2, total height: 1,500 mm, total length: 1,400 mm, total width: 2,100 mm, rotational speed (min.): 120 rpm, rotational speed (max.): 3,000 rpm, drilling capacity: 75 mm, distance between stands: 600 mm, spindle motor power: 551 W, For sale is a Hauser brand coordinate drilling machine of type OP3 The machine is ready for use and fully functional Technical data: HAUSER OP3 coordinate drilling machine Table: 550 x 320 mm Longitudinal travel: X-axis 400 mm Cross travel: Y-axis 250 mm Vertical travel: Z-axis 400 mm Cone in the spindle: MK 2 Drilling capacity in steel: 20 mm Stroke of the drilling spindle Z-axis: 130 mm Bore diameter: max. 75 mm Distance from table to spindle: 600 mm Spindle speeds: infinitely variable: 120- 3000 rpm Feed rates: Drill spindle slide: Number (steps) 2, 0.03 mm/rev 0.06 mm/rev Spindle motor: 0.75 HP Machine weight: approx. 1500 kg Dimensions: 1400x1500x2100 Transport and loading can be organized throughout Europe on request for an additional charge. Fodpfx Aevzrx Nsfnjpb Prices plus VAT Viewings possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Year of construction: 2007, condition: ready for operation (used), Main Drive Fodpfx Afsx Imtaenspb Number of axis 5 Movement X-Axis Movement 3500 mm Z-Axis Movement 1500 mm Y-Axis Movement 1200 mm This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1800 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information. Application Types Other Machine Tools

Condition: excellent (used), Single-sided oscillating drilling machine BACCI MOA One drilling unit Oscillation range up to 120 mm Tool rotation speed: 9500 rpm Maximum drilling depth: 80 mm Fjdpfex Ih Ryex Afnspb Manual table height adjustment up/down Table angle adjustment +/- 20° Main motor power: 2.2 kW

Condition: used, GANNOMAT Compact 30 hole drilling machine - used - pneumatic clamps, foot control, 2 drilling beams with 15 spindles each ----- Technical specifications ----- Number of spindles: 30, Drill spindle spacing: 32 mm, Fpedpfx Afewmmt Renjb Motor power: 2 x 0.75 kW, Voltage: 400 volts, Pneumatic connection: 6 bar, Dimensions without stop ruler: 850 x 1,100 mm, Weight: 240