Used Dough Dividing for sale (1,541)

Condition: ready for operation (used), Year of construction: 1998, WP CCR59 conical rounder in Kemper execution is suitable for many common dough types, such as wheat, wheat/rye, multigrain and whole wheat doughs. The dough pieces are being taken over by the rotating cone and shaped into round dough pieces by the specially shaped tracks. Because the tracks are mechanically processed, there is a very high precision between tracks and cone, which results in a minimum of dough crumbs year of build 1998 type M2 weight range 300-1700 gr. cold and hot air max cap. 5000 pcs/h cast iron cylinder/cone, teflonized aluminium tracks, in- and outside teflonized cone with top bearing frame steel, nickel coated cover plates stainless steel, brushed Cjdpfx Aisw Ic E Deiori undercarriage nickel steel with 4 castors, dowel pins and blocking operation control panel

Condition: refurbished (used), Kemper SP 75 L spiral mixer 120 kg dough suitable for all types of dough, thanks to the gentle kneading mobile with permanently installed bowl short kneading time due to large kneading area Crodew Ngz Sspfx Aiioi easy to use smooth surfaces, easy to clean large power reserves, convincing quality assurance capacity in flour 75kg bowl contents 180 liter

Condition: refurbished (used), Diosna SP 200 AF spiral mixer with 2 bowls 200 kg dough temperature measerument digital control panel suitable for all types of dough, thanks to the gentle kneading capacity in flour 125kg Codpfxew Rdmze Aiisri bowl contents 300 liter tool drive 11/18.5 KW bowl drive 0.66/1.3 KW hydraulic drive 1.1 KW

Condition: ready for operation (used), Koenig Mini Rex 4000 Futura bun roll machine 2-pockets with formstation DR-RR 400. For the production of rounded, long-rolled, long-rolled and folded as well as flattened products drum and pistons SKG54-AKG70 weight range 25-140 grams several weight ranges with other drums is possible through the use of combined stamp sizes, on request max. cap. 4000 pcs/h year R 2021 compact design fully automated dividing and rounding of wheat doughs and rye- -wheat doughs with a maximum rye percentage of 40% excellent results with the production of round, long-rolled, long-rolled and folded as well as flattened goods tried-and-tested in thousands of in-store bakeries height-adjustable calibrating head, folding net belts, lower belt and upper belt for ergonomic working with the following functions: transporting, long rolling, pressing flat teflonised collecting drawer for manual product removal Cedpfx Asxu E Rhoiieri high level of operating comfort quick and easy cleaning on account of plug-in elements stainless steel design power supply: 1.5 kW weight approx. 460kg

Condition: refurbished (used), Diosna SP 200 AF/T spiral mixer with 2 bowls 200 kg dough suitable for all types of dough, thanks to the gentle kneading digital control panel capacity in flour 125kg bowl contents 300 liter tool drive 11/18.5 KW Codez Eh Nfopfx Aiijri bowl drive 0.66/1.3 KW h hydraulic drive 1.1 KW

Condition: refurbished (used), WP UC 80 spiral mixer with 2 bowls 120kg dough excellent dough preparation with high water absorption high air inclusion during the kneading cycle warranting voluminous, first-class kneading results no rosetting problems during kneading process gentle handling of doughs during the kneading cycle despite of high running reduce the heating-up effect excellent reprocessing properties of the dough universal application for a great variety of doughs offering itself for smallest dough batches Csdjz Erbljpfx Aiisri fruit and other ingredients can be gently and quickly added holding capacity of bowl 210 L

Condition: good (used), Year of construction: 2018, functionality: fully functional, total width: 3,642 mm, total length: 3,334 mm, input voltage: 400 V, feed length X-axis: 2,900 mm, feed length Y-axis: 2,600 mm, working width: 2,600 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, cutting width (max.): 2,540 mm, cutting height (max.): 20 mm, compressed air connection: 9 bar, We are selling our Atom FlashCut Fashion 26B All-in-One fully automatic cutting table system. With a usable working area of 2,900 x 2,600 mm, a cutting window of 2,540 x 850 mm, and a separate unloading area of 1,200 x 2,600 mm, the FlashCut 26B offers ideal conditions for efficient workflows. The maximum cutting height of 20 mm allows for processing a wide range of materials – including multilayer applications. Two independently operating tool heads ensure high speed and maximum productivity. Servo drives on the X, Y, and Z axes guarantee precise movements with a travel speed of up to 80 m/min and an acceleration of 1G. Intelligent Material Handling & Vacuum Technology A continuous conveyor belt feeds the material into the processing zone. The vacuum table is divided into 300 x 300 mm segments, allowing targeted activation of individual areas. This ensures precise material fixing while minimizing energy consumption. Two high-performance vacuum pumps with frequency control (3–15 kW) automatically adjust their output to actual requirements. The result: secure material fixing with energy-efficient operation. Precision through Camera and Projection Technology For maximum material utilization, the system is equipped with two cameras with integrated light sources and dimmers for detecting irregular material contours – for example, when processing leather hides. Flaws can be digitally marked and taken into account during further processing. Two high-performance projectors support automatic nesting by projecting cutting contours directly onto the material. In addition, item numbers, sizes, or other markings can be projected onto the cut parts – ideal for process reliability and traceability. Powerful CNC Control & Software The system features a modern CNC control unit, including TFT color display, keyboard, and USB interface. An integrated computer with Windows Embedded, Ethernet connectivity, and TeamViewer support enables easy operation and remote maintenance. The software package includes: - DXF converter for reading and converting CAD files - Interactive layout software - Automatic nesting software - CAD module for creating simple geometries Optionally, the Luxury Nest Strategy adds a specially developed nesting logic for optimizing leather cutting. It takes into account quality zones, defect areas, and defined rotation and grouping rules to ensure maximum material yield. Versatile Tool Equipment The FlashCut 26B comes with a multi-tool head. Standard tools include: - Drag knife - Punch tools (various diameters) - Marking tool - Tracing needle - Laser pointer - Knife holder and ejector This makes the system flexible for cutting, marking, and perforating tasks. Safety & Reliability Csdpfx Aeymn R Noiisri A safety system with light barriers and emergency stop button ensures maximum operational safety. The machine is CE-compliant and designed for continuous industrial operation.

Condition: used, Year of construction: 1995, functionality: fully functional, Hämmerle / HRC Dividing Straightening Machine 80.1250 | 1,250 mm | 19 Rolls | ARKU Overhaul 2020 For sale is our Hämmerle / HRC dividing straightening machine 80.1250, manufactured in 1995. According to the available documentation, the machine was overhauled by ARKU in 2020 and is suitable for straightening laser-cut, flame-cut, and stamped parts. Technical data according to machine documentation: Maximum material width: 1,250 mm Specified material thickness range: 0.8–20 mm 19 straightening rolls with 80 mm diameter Straightening speed: 2–20 m/min Infeed table with recessed ball rollers Driven discharge roller conveyor, approx. 2 m Year of manufacture: 1995 The actual material cross-section that can be straightened depends, among other things, on the material, material width, and part geometry. We would be happy to discuss your specific application using concrete parts as examples. Price: €140,000 net, negotiable, ex works Leopoldshöhe. The machine is available for immediate delivery. Inspection by appointment; dismantling, loading, and transport are not included in the price. We will provide documentation on the overhaul to interested parties, if available. Crjdpfxoz Eabyj Aiiji Please include information on the material, sheet thickness, and part size with your inquiry.

Condition: used, functionality: fully functional, overall weight: 1,200 kg, - bowl capacity: ± 350 liters - bowl diameter, internal: 99 cm, external: 103 cm - bowl depth: 50 cm - bowl and mixing arm made of stainless steel - equipped with thermal motor overload protection - suitable for a maximum of 150 kg of flour - for bread dough: 240 kg of dough - (bowl capacity: ± 350 liters) - bowl diameter, internal: 99 cm, external: 104 cm - height to the bowl rim: 83 cm - automatic/hydraulic bowl locking system - equipped with a special stainless steel mixing arm for butter dough - or, optionally, with a new stainless steel kneading spiral - equipped with motor overload protection - bowl drive via roller drive - stainless steel/plastic dust cover - machine weight: 1200 kg, bowl carriage: 280 kg - motor power, kneading spiral: 14.1 kW Credpfx Aijz Imzrjisi - motor power, bowl drive: 1.1 kW - PLEASE NOTE! Without bowl carriage and AS IS.

Condition: good (used), Year of construction: 2004, functionality: fully functional, input voltage: 400 V, total length: 6,700 mm, working width: 650 mm, total width: 1,100 mm, table length: 5,200 mm, Canol Make-Up-Line "Canolino" 5.2 (with about 670 cm overall length) Credpfx Aijy Na T Noiei Make-up-table / -line / dough-processing-line "Canolino" 5.2 with about 65 x 520 cm working belt, year 2004, designed to produce a wide variety of products like puff- pastry products with odr without filling, yeasted products and other pastry specialities. The "Canolino" line is easy to use and mounted on wheels, it comes with a dough-belt calibraion head, a huge varity of different cutting rollers (incl. croissant roller or special roller for "Stutenkerle" (=sweet-yeast-dough / gingerbread-man), a water-drop humidification station, a volumetric filler (V4 F) / electric screw-depositor with 4 outlets, suitable for dosing creamy products with spot, continuous or intermittent dosing, a motorised winding roller, for example for snails or other wound products, various winding and folding tools and pressure rollers as well as a motorised guillotine knife for cross-cutting. Perfect for the use in small and medium-sized bakeries. The wide range of easy-to-use and also easy to mount accessories can be changed in a short time nearly without tools. The electric guillotine can also be moved on the desired position. The make-up table is manual controlled for very simple operation and managing the various work functions. All components and accessories are electrically operated (also filler, guillotine knife) so there is generally no need to use compressed air. The make-up-line and all accessories (as shown in the photos) are in good "bakery-condition" and are offered for sale fully cleaned and ready for use. Dimensions: approx. 670 cm in total length, approx. 110 cm in width and approx. 195 cm in height (control unit and filling station)

Condition: used, Budde roller curve right or left 90° with pass through 2955-670-620 IR795 RA1687 Make: Budde Running direction: 90° right running/ left running Roll width (RB): 620 mm conical, plastic coating Nominal/external width (NB): 670 mm Inner radius (IR): 795 mm length: 295mm Height frame: 125 Height including motor: 380 currently set to a height of 700 Height adjustable Roll gap: 75-120 motor MOVI-Mot 3x300-500V 0,37kW 1400 rpm max Gear motor: SEW R17 DRS71S4/MM03 Conveying speed: freely adjustable between 0,11 and 0,7 m/s with frequency converter Scope of delivery: with 3adjustable supports, 3 Light Beam and a push button For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. Crsdek Abf Hopfx Aiisi With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: as good as new (ex-display), Festo pneumatic cylinders RA1941 Manufacturer: Festo cylinders Some still Orginalverpackt alongside prices are per piece. 8 x ADVU-25-10-P-A 86,39€ 7 x ADVU-40-15-P-A 128,46€ 8 x ADVU-40-20-A-P-A 131,49€ 4 x ADVU-25-20-A-P-A 89,60€ 8 x DNC-63-160-PPV-A 198,00€ 1 x DNC-50-125-PPV-A 165,03€ 7 x DNC-40-80-PPV-A 139,50€ 1 x DNC-40-200-PPV-A 149,01€ 2 x DNU-32-50-PPV-A price on request 3 x STA-50-30-P-A-SA Price on request 1 x FENG-40-200-KT+DNC-40-200-99A 624,99€ 1 x FENG-40-200-KT 474,99€ 4 x DMM-25-15-P-A 46,38€ 1 x DFM-32-50-PA-GF 228,55€ 8 x DNC-32-40-PPV-A 120,54€ 1 x DNC-32-50-PPV-A 121,15€ 10 x DNC-32-80-PPV-A 122.93€ 10 x DNC-40-50-PPV-A 137,13€ 3 x DNC-50-80-PPV-A 160,87€ 2 x DNC-50-50-PPV-A 157,85€ 5 x DSNU-25-25-PPV-A 43,28€ 4 x ESNU-25-20-P-SA Price on request 1 x DSNU-25-10-P-A 36,59€ 2 x DSNU-20-20-P 34,65€ 1 x ESNU-16-25-P Price on request 1 x DSNU-20-20-P-A 34,65€ 1 x DSNU-20-50-PPV-A 40,77€ 2 x DGPL-40-450-PPVA-KFB price on request 7 x DNC-40-500-PPV-A 172,76€ 7 x DSNU-32-80-PPV-A 52,08€ 4 x DSNU-32-60-PPV-A 57,12€ 6 x DZF-25-12-A-P-A 110,52€ 1 x DZF-32-A-?-A price on request 2 x DZF-32-125-P-A-SA 126,57€ 2 x DSNU-25-125-PPV-A 45,05€ 1 x DSNU-25-125-PPV-A+2 SENSORS 101,30€ 1 x DSNU-25-300-PPV-A 48,35€ Credek Abl Nspfx Aiiei 1 x DNC-63-160-PPV-A-KP 815,28€ 2 x DNC-63-160-PPV-A 198,01€

Condition: excellent (used), Year of construction: 2022, 512 USED Debag Monsun GUV cooling-proofer, freezer chamber. INTERNAL DIMENSIONS (in cm): - W: 150 - L: 260 - H: 190 TECHNICAL DATA: - refrigerant: R449a - power supply: 400 V AC, 50 Hz, 3/N/PE - power: 9.8kW Paid options available: transport. The price is a net price. Codpjzugi Sofx Aiisri Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain Credpfx Asz I T Rmsiisi turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW tool taper SK 40 table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 54 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 8,0 x 5,6 x 2,8 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 260 New Design - NC dividing head (A-axis) - Operating hours: 18.709h spindle run - overhauld spindle installed (Dec 2023) - Z-axis weight compensation changed (Feb 2023) - Production package - Option: tool clamping for tightening bolts - WITHOUT vices!

Condition: used, functionality: fully functional, machine/vehicle number: 32059, mileage: 98,300 km, power: 235 kW (319.51 HP), first registration: 02/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro6e, suspension: steel-air, loading space volume: 10.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Crodpfxoz E Hg Ns Aiiji Engine D0836LFLBI, reinforced clutch, manual transmission Enfach-H, group switch, front axle with leaf springs, rear axle with air suspension and level adjustment, differential lock, MAN EVBec engine brake with multiple stages, ABS, ASR, ESP, disc brakes, electronic braking system EBS, full brake assist, emergency brake assist EBA, emergency brake signal, lane departure warning LDW, daytime running lights LED, heated fuel filter, trailer hitch Rockinger 400G150B (40 mm), steel bumper Cab C (2240 mm wide, 1620 mm long), 2 seats, air-suspended driver's seat with seat heating, central locking with remote control, speed limiter, tinted windshield and door windows, tilting roof, heated and electrically adjustable mirrors, electric windows, automatic air conditioning, multifunction steering wheel, safety automatics, cruise control, on-board computer, MAN Mediasystem Navigation Advanced radio, reversing camera, smoker's package, 2 rotating beacons on the roof, pre-equipment for Toll-Collect, digital tachograph CONTI, Connectivity-Board module (RIO Box), sun visor on driver's door Cylindrical container designed as a tipper (tipping angle min. 35°), container wall thickness 6 mm, total air volume approx. 10.5 m³ (sludge chamber approx. 10 m³ / water chamber approx. 0.5 m³), vacuum pump Gardner Denver Wittig RFW 150 (850 m³/h) hydraulically driven, HD pump Pratissoli KE 30H (approx. 70 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation continuously adjustable, small hand-operated HD hose reel made of stainless steel for 60 m HD hose DN 13, 40 m installed, spray gun, water chamber is welded into the front of the container with inspection opening, water chamber level indicator made of flexible, transparent hose, filling via a Storz "C" connection and free flow path, rear door hydraulically opens upwards over the entire cross-section with pipe breakage protection, hydraulic latch, sludge chamber level indicator with external scale with division every 500 l and internal float, lower and upper suction connection DN 100 with Perrot coupling system and blind cover, discharge chute made of stainless steel, 2 pneumatically operated slide valves, container emptying: free discharge through the lower suction connection or by tilting backwards, 4-way valve pneumatically controlled from the operating station, over-suction protection, oil separator, operating station made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, transport hose reel for suction hoses with hydraulic drive mounted on the floor flap with 40 m suction hose DN 80 (divided into 2x 10 m and 1x 20 m lengths), waste container made of stainless steel, tiltable at the rear left, toolbox made of stainless steel, ladder 3 m long, hand washing basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights on the right and left on the container, 1x LED rotating beacon at the rear, reversing camera

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 12,900 kg, empty load weight: 2,100 kg, loading space volume: 12 m³, loading space width: 2,400 mm, loading space length: 6,500 mm, loading space height: 800 mm, first registration: 01/2026, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel construction, flap, lashing eyes, swing-out flap. Construction: Roll-off container with folding side walls and swing-out flap, approx. 12.5 m³, archive photos of roll-off container, roll-off flatbed: approx. 12.5 m³, with side walls and swing-out flap that can be driven over, with spring relief. Spring relief for the side walls and flap. Manufactured according to DIN 30722-1. Internal dimensions: 6500x2400x800mm. Floor: 5mm - S235, wall: 3 mm - S235. Frame: INP 180. Floor / side wall 90 degrees. Side wall 800mm, divided in the middle with spring relief, removable stakes!! Front wall 1700mm high!! Last spars: C-profile 160mm. 8 x lashing eyes recessed in the floor (4 per side). Rollers: Length 300 mm, diameter 159 mm + greaseable hinges. Ladder screwed onto the front wall. Net hooks. Hooks: Ø 50 made of steel S355 | height: 1570 mm. Container inspected and approved according to DGUV 114-110. Surface / paint: Primed: Inside, outside, each 80 µm. Painted outside, RAL color: 40 µm. Crodpfxez Ng Tfs Aiioi Color: RAL 7016 - hydrodynamic method. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 4,000 rpm, table width: 1,000 mm, table length: 3,700 mm, spindle motor power: 28 W, SORALUCE TA-A 35 CNC milling and boring center, equipped with a HEIDENHAIN iTNC 530 HSCI numerical control system, an automatic milling head, and a 40-position tool changer. Technical specifications Manufacturer: SORALUCE Model: TA-A 35 Year: 2013 Numerical control: HEIDENHAIN iTNC 530 HSCI Longitudinal travel X: 3,500 mm Vertical travel Z: 1,250 mm Transverse travel Y: 1,200 mm Table dimensions: 3,700 × 1,000 mm Spindle power: 28 kW Spindle speed: 20 to 4,000 rpm Spindle torque: 479 Nm Spindle taper: ISO 50 / DIN 69871 A Rapid traverse rates: 25,000 mm/min Machine weight: approximately 18,500 kg Equipment and options Automatic milling head with 2.5° × 2.5° indexing Automatic 40-tool changer, with horizontal and vertical tool change HEIDENHAIN control with HR 410 electronic handwheel Crjdoz Nhzdspfx Aiisi M&H 20.41-MULTI workpiece measurement system HEIDENHAIN TT 140 tool measurement probe Longitudinal chip conveyor Transverse chip conveyor Protective enclosure with access doors 3D thermal compensation Automatic centralized lubrication Preparation for the integration of a CNC dividing head

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, The VEMAG sausage production line is a complete set of three cooperating VEMAG machines: the HP30E vacuum filler (2012), the LPG 208 length-portioning linker (2014), and the AH212 hanging machine (2016). The set covers the entire process from filling the casing, through portioning and linking sausages into lengths of a set size, to automatic hanging on smoke sticks, enabling efficient and repeatable production in medium and large meat plants. How does the VEMAG sausage production line work? Key advantages of the VEMAG sausage production line Vacuum operation ensures a compact, uniform stuffing without air pockets, improving the appearance, color, and shelf life of finished sausages. The LPG 208 linker allows cooked, fresh, and dry sausages to be produced on one machine, using natural, collagen, cellulose, and polyamide casings, and its automatic casing pusher shortens changeover times. Interchangeable dividing belts with quick-release catches can be changed in under 1 minute, and the linking speed can be set separately for each casing type. Gentle handling protects casings, including overlapped ones, and the hygienic design allows low-pressure cleaning. The AH212 hanging machine allows any hanging pattern (individually, in pairs, in threes, in fours, etc.) and ensures ergonomic work, reducing operator physical strain. All three units come from a single manufacturer and are designed to work together, which simplifies control, operation, and servicing of the entire line. Technical specifications of the VEMAG sausage production line VEMAG HP30E vacuum filler (Filler) Manufacturer: VEMAG Model: HP30E Year of manufacture: 2012 Filling capacity: up to 8,700 kg/h Portion weight: 5 g to 99,999 g Air consumption: approx. 40 l/min Portioning speed: > 600 portions/min Vacuum system: 40 m³/h Capacity: 350 l VEMAG LPG 208 length-portioning linker (Linker) Manufacturer: VEMAG Model: LPG 208 Serial number: 2080470 Year of manufacture: 2014 Power supply: 400–460 V, 3~, 50/60 Hz Rated current: 7 A Power: 4.5 kW SCCR: 5 kA rms Weight: 517 kg Caliber range: approx. 13–40 mm and more Filling rate: from approx. 300 to 4,400 kg/h (depending on casing type and caliber) Linking head: twin, casing change in under 2 s Dividing belt changeover: under 1 min VEMAG AH212 hanging machine (Hanging Machine) Credpfjz N A Niox Aiisi Manufacturer: VEMAG Model: AH212 Serial number: 2120444 Year of manufacture: 2016 Power supply: 400–460 V, 3~, 50/60 Hz Power: 0.5 kW SCCR: 5 kA rms Weight: 298 kg

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Cedpfxoz Rl Hyj Aiiori Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: good (used), Year of construction: 2003, functionality: fully functional, controller model: Basis Bosch Typ 3, Standard equipment: Machine - Working area 2500 x 1250 mm - Rotatable tool holder - Automatic repositioning with clamping device - Automatic tool changer with 19 stations - 2 clamping jaws - Programmable clamping device with pre-selectable - Clamping force - Dividing slide 200x200 mm - Part sorting into 2 containers - 2 good part containers - Ball tables - Tool spray lubrication - Punch scrap extraction - Scrap container - Quick shut-off for hydraulics - 10.4" TFT color screen - 3.5" floppy disk drive - Graphics programming ToPs 2000 - ToPs 2000 - Software package for PC (CD-ROM) - Safety light curtain, 2-beam - RJ45 network connection - Network connection including installation Extended machine equipment - Multitool function - Thread forming function - Marking/fast beading function - Roller tool function - Vibration-damped installation Automation - Loading and unloading device Cjdpfxez Rl Iws Aiiori - Extended pull-out for raw material trolley - and unloading platform - Manually movable raw material trolleys - Scrap extraction system - Stop system with spread magnet - Sheet metal thickness gauge - Suction frame for loading - Gripper for unloading

Condition: good (used), 1 x Mono doughnut fryer. model FG059-B02 Csdpfx Asy S Td Heiisri

Condition: used, Year of construction: 2008, Roll production line König Basic Rex II Combiline 600 Year of manufacture: 2008 Condition: Currently undergoing maintenance; photos taken before maintenance For the production of round, oval, stamped, oblong, and flat products made from wheat dough, mixed wheat dough, cereal dough, or fine yeast dough Suitable for shaped rolls, oblong rolls, etc. Working width: 600 mm Max. hourly output: 7,500 pieces (5 rows) Credpfx Aez A Ryneiioi Max. hourly output: 4,500 pieces (3 rows, for oblong dough products) Weight range: 35–85 g Dough divider and rounder, type Basic Rex II, 5 rows Long-working board before the proofing cabinet Proofing cabinet with climate control Stamping station with reversible cups for stamping round and oblong products Forming station with 2 pressure rollers and a driven upper belt Depositor for 60 x 80 cm or 60 x 100 cm baking trays and boards Manual removal of baking trays Includes stamping tools for Kaiser rolls, Housky rolls, and oblong dough rolls Includes dough divider block for 5- and 3-row operation

Condition: used, Year of construction: 2014, Roll forming line Trima K2 with compact proofing cabinet G2-3 Suitable for round, long-rolled, enveloped, and flattened products, e.g.: hamburger buns, hot dog buns, mini baguettes Dough divider and rounder K2 (year of manufacture 2014) Digital adjustment of weight, shaping chamber height, shaping speed, and shaping time Dough hopper capacity 25 kg with infeed belts Mehler for dough hopper, shaping chamber, and spreading belts Manual adjustment of pressing force for different types of dough Weight range: 25-95g / 50-150g Csdpfxez A Ry Ij Aiijri With foot switch Touchscreen control with recipe memory Output: max. 3,200 pieces/h Proofing cabinet G2-3 (year of manufacture 2013) Proofing time approx. 3 min (depending on the upstream machine) Number of holders: 100 With motorized top belt including adjustable speed Manual removal of dough pieces

Condition: used, Year of construction: 2018, Roll production line Fortuna Magnus S6 Profiline Dough divider and rounder Fortuna Magnus S6, year of manufacture: 2018 Crjdpfx Asz A R Acjiiji 6-row head machine Weight range 50 g to 140 g Proofing cabinet with heating and humidifier, year of manufacture: 2012 Operation without proofing cabinet possible Long rolling station Cutting unit Punching unit Seeding station with humidification for one-sided seeding Depositor for baking trays or depositing onto a conveyor belt for further processing More information, pictures and videos will follow...

Condition: used, Year of construction: 2004, Roll production line König Mini Rex G2000 Year of manufacture: 2004 Compact system G2000 with Mini Rex 4000 heading machine Crjdpfx Ajz A R Apoiioi Compact proofing cabinet with an hourly output of approximately 2,500 pieces For higher output without proofing cabinet operation, Mini Rex, swiveling, up to a maximum of 4,000 pieces/hour Weight range: 35-85 g Dough divider size: SKG58 and RK58 Dough dividers for round and square rolls Lateral discharge conveyor Proofing time approx. 6 min at an output of 2,000 pieces/hour Dough rounding unit incl. one dough rounding tool of your choice, subject to availability Integrated infeed and long roller