Used Dosing Screw for sale (6,134)

Condition: excellent (used), Year of construction: 2006, overall weight: 1,000 kg, volume flow: 425.4 m³/h, pressure (max.): 7.5 bar, Equipment: type plate available, PROD - ATLASCOPCO TYPE - GA37 PLUS S/N - API510029 YEAR - 2006 POWER (kW) - 37 OUTPUT. (m3/min) - 7.09 CIS (bar) - 7.5 Ihodpferz Rtbsx Ah Nst HRS (DOC/GENERAL) - 6043 WAVE - no COND. DRYER - no COOLED (POW/WATER) - air ON TANK - no NEW/USED - USED

Condition: excellent (used), Year of construction: 2022, operating hours: 4,500 h, functionality: fully functional, overall weight: 625 kg, total length: 1,460 mm, total width: 800 mm, total height: 1,530 mm, pressure (max.): 10 bar, Equipment: refrigerant dryer, type plate available, For sale is a Kaeser screw compressor ASK 34 T SFC in excellent condition. Year of manufacture: 2022. Initial commissioning: 05/2023. Variable speed drive (SFC). The output is continuously adapted to the actual air demand. Very high energy efficiency with fluctuating requirements. Fully equipped with integrated refrigeration dryer (T). Immediately supplies dry and clean compressed air. Significant energy savings. The compressor was operated in a bookbinding workshop (very clean environment). Ihjdpfxox U S Uce Ah Njt

Condition: like new (used), Year of construction: 2016, operating hours: 1,596 h, functionality: fully functional, Screw compressor Atlas Copco GA22+. 7.5 bar with 4.09 m³/min. 22 kW Isdpfx Ahjx S Etyo Neht

Condition: good (used), overall weight: 1,200 kg, volume flow: 890 m³/h, Manufacturer: Worthington Model: RLR100V6 Isdpfeuf Nibsx Ah Neht Max. working pressure: 9,5 Bar Power: 100Hp / 75KW 75 kW screw compressor with frequency inverter, with a flow rate of 880 m3/hour. Flow rate: 890 m3/hour. Three-phase 380V 3000 rpm Weight: 1200 kgs.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Screw Compressor Manufacturer: Atlas Copco Model: GA30 VSD Year of manufacture: 2013 Stepless speed control Operating hours: approx. 46,980 h Power: 30 kW Ihodpjx U D Smjfx Ah Not Air flow: 5.58 m³/min Weight: 530 kg Max pressure: 13 bar

Condition: good (used), Scope as per images Ijdpfx Aex U D D Aoh Neht Continuously variable speed from 15 to 3,000 rpm Drive 2.2 kW

Condition: good (used), Year of construction: 2008, volume flow: 464.4 m³/h, pressure (max.): 7.5 bar, Equipment: type plate available, PROD - ATLASCOPCO TYPE - GA45 S/N - API595605 YEAR - 2008 Iodpforztmwjx Ah Neht POWER (kW) - 45 OUTPUT. (m3/min) - 7.74 CIS (bar) - 7.5

Condition: good (used), Stock number: 2852 Manufacturer: Poland Year of manufacture: 1974 Machine number: 33891 Type / Model: TUD 50 Centre distance: 2,000 mm Ijdpfx Ahjx Uykxo Neht Spindle bore: 56 mm Centre height: 250 mm Swing over bed: 500 mm over cross slide: 300 mm Speed range: 18 to 1,800 rpm Longitudinal feed: 0.08 to 3.26 mm/rev Cross feed: 0.04 to 1.63 mm/rev Power connection: 7.5 kW Accessories/Equipment: 3-jaw chuck Condition: good Weight: approx. 3.5 t Dimensions: 3,500 x 1,150 x 1,600 mm

Condition: used, Year of construction: 2010, machine/vehicle number: 106547, volume flow: 182 m³/h, operating pressure: 10 bar, power: 87 kW (118.29 HP), rotational speed (max.): 1,315 rpm, Bornemann pumps, type HC 180-68, 10 bar pressure, 182.6 m³/h. Fitted with ABB motors, type M3KP315, 132 kW, 232 A. Good condition, 4 units available. All pumps in stock can be viewed in the catalogue. Ihsdovwmpbepfx Ah Nst

Condition: excellent (used), Year of construction: 2011, operating hours: 68,433 h, functionality: fully functional, Atlas Copco GA37VSDFF screw compressor. 13 bar, 7.25 m³/min. Integrated dryer and inverter. Motor and compressor element overhauled at approximately 65,000 operating hours. Isdpfxjx Sv Smj Ah Nsht

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Screw Compressor Manufacturer: Atlas Copco Model: GA30 VSD+ Year of manufacture: 2014 Speed: steplessly controlled Operating hours: approx. 59,880 h Power: 30 kW Volume flow: 5.58 m³/min Weight: 380 kg Ihedpfx Asx U D Rpsh Njt Max pressure: 13 bar

Year of construction: 2016, condition: ready for operation (used), overall weight: 1,100 kg, total height: 1,960 mm, product length (max.): 2,120 mm, screw diameter: 45 mm, General Data Machine weight 1100 kg Measurements height 1960 mm Dimensions Ihodpfx Ahex D Edyj Net Machine Length 2120 mm Injection Unit Screw diameter 45 mm This Krauss Maffei KME 45 XS single screw extruder was manufactured in 2016. It features a screw diameter of 45 mm and a length of 1350 mm, with a drive power of 23 kW and a maximum speed of 2486 rpm. The machine includes five heating/cooling zones and can handle a maximum air flow of 5 × 630 m³/h. If you are looking to get high quality extrusion capabilities consider the Krauss Maffei KME 45 XS machine we have for sale. Contact us for more information. Application Types Extrusion

Condition: excellent (used), Year of construction: 2013, overall weight: 755 kg, volume flow: 316.2 m³/h, PROD. KAESER TYPE - ASD47 SFC Isdera Akzspfx Ah Njht S/N - 3068 YEAR - 2013 POWER (kW) - 25 OUTPUT. (m3/min) - 1.07-5.27 CIS (bar) 8.5 WAVE - yes BUILT. DRYER - no EXCHANGER - yes

Condition: good (used), Year of construction: 1970, Brand HILGELAND Type CH 5 ALL Year of build 1970 Serial number 5282 Electric connection 380V Ihsdpfou Szucjx Ah Net Dimension l 5500mm Dimension w 2200mm Dimension h 1900mm (screw and rivet), capacity : M6 - M14, cutting length max. 200mm, variable speed: ... up to pieces 90 p/min, diameter 16mm

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 72588, operating pressure: 4 bar, Screw pump based on BrookHansen 132kW motor, type 7-ud315sn, Bornemann pump, type HC-232-100, 4.5 bar, 498–507 m³/h. Used for transfer of heavy fuel oil at a fuel terminal. A frequency converter for this motor is also available. All available pumps can be viewed in the catalogue. Ihodpfx Ahovvlrro Njt

Condition: used, We offer directly on behalf of the owner : Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW In the last 3 years, a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - 1 x year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, 212kW, 460V - 1 x 2002, factory overhauled ( 8 t€ ) in 2020, unused - 1 x year of manufacture 1986, factory overhauled in 2015, used 2020 - 2023 Barrels - 16 various, new + used, with + without openings Screw shafts Ihsdpfxox Tvcbe Ah Not - 2 x approx. 4,600 mm Miscellaneous : - Supports - screw tips Sold without electrical and control devices and without screw segments. Further technical data and details on request or see data sheets in photos / PDF

Condition: reconditioned (used), Year of construction: 2008, operating hours: 2,996 h, functionality: fully functional, machine/vehicle number: WCA0F081381390001, Compair compressor in excellent condition from 2008, with an operating pressure of 12 bar and a volumetric flow rate of 6 m³/min. Speed: 2600 min⁻¹. Ihsdpfx Ajx Tuc Teh Nst

Year of construction: 2008, operating hours: 75,559 h, condition: ready for operation (used), Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Ihjdpex D Rgyjfx Ah Njt Central main power supply This Krauss Maffei KME 75-36 R AC single screw extruder was manufactured in 2008. It features a KM-GM 750 control integration with meter weight and mass throughput control, and a capacity of up to 750 kg/h granulate. The machine includes a connection for INDEX wall thickness measurement and is equipped with a EURO socket CEE 32 A - 6 H / 250 V. Contact us for more information about this machine. Application Types Extrusion

Condition: new, Year of construction: 2022, overall weight: 250 kg, total length: 120 mm, total width: 80 mm, total height: 120 mm, volume flow: 180 m³/h, pressure (max.): 10 bar, Equipment: type plate available, PROD - CZEMAR TYPE - LEVANTER 22/10 S/N - 38020 Ijdpfxjrck Ecj Ah Noht YEAR - 2022 POWER (kW) - 22 OUTPUT. (m3/min) - 3.0 CIS (bar) - 10

Condition: used, Year of construction: 1981, National 2-3 Hot Former induction heater, feeder, straightener Ihodpfjwl Iw Uox Ah Njt

Year of construction: 1994, condition: used, Dosing pump 2 heads Year : 1994 Ideal for corrosive products Ihjdpfox Rz Sisx Ah Njt Large batches of spare parts Motor EX

Condition: good (used), Year of construction: 2020, operating hours: 18,526 h, functionality: fully functional, machine/vehicle number: API842024, overall weight: 500 kg, total length: 1,280 mm, total width: 900 mm, total height: 1,600 mm, power: 26 kW (35.35 HP), rotational speed (max.): 6,500 rpm, ATLAS COPCO GA 26 VSD+FF Compressor - Max. pressure: 8 bar - Flow rate: 5.1 m³/min - Voltage: 400 V - Frequency: 50 Hz Ihjdpfxoxw Ugqo Ah Net Note: The item must be collected between 19 and 23 January 2026, on a binding date to be agreed. FCA D-76571 Gaggenau – loaded onto truck

Year of construction: 1997, condition: used, feed pressure 10 bar liter capacity 1400 m³ / min Iodpfxeqvcldo Ah Nsht dimensions 700 x 550 x 1100 mm total power requirement 11 kW weight of the machine ca. 275 kg

Condition: good (used), Year of construction: 2017, overall weight: 403 kg, volume flow: 199.2 m³/h, pressure (max.): 10 bar, PROD. - CHICAGO PNEUMATIC TYPE - CPVS25 S/N - ITJ109435 YEAR - 2017 CAPACITY (kW) - 18.5 OUTPUT (m3/min) - at 7.5 - 3.32, at 8.5 - 3.14 , at Ihoderb A Sfopfx Ah Nst at 10 - 2.92 CIS (bar) - 10 INVERTER - yes

Condition: used, Year of construction: 2000, Manufacturer: Atoma Model: 823-C-400 Ihodpfx Aox Rz Hgoh Not Year: 2000   Number of weighing channels: 3 Maximum weight: 400 g Margin of error (e): 0.5 g   Feeding by hopper and vibrating lane. Conveyor belt Product stop by cell