Used Doosan Dx 520 Lc for sale (261)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, DNM 6700L from DN Solutions is CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large Kjdpfezh U A Tjx Ahbodu removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine -12 bar through the spindle cooling -ball screw nut cooling -oil skimmer belt type -ethernet connection -coolant gun -tool breakage detection in magazine -automatic doors -robot interface -air clamp interface on the table -vacuum pump -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor- right side -mist collector interface

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 250 rotary table -HIWIN RTS 250 suport Kdodpfxey Dr A Ej Ahbou -Hidraulic aggregate 200 bar 2 A+B -4th axis fixture support hydraulic (3x oil, 2x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: good (used), Year of construction: 2011, functionality: fully functional, DOOSAN DNM 400A – CNC vertical machining center, FANUC, year 2011 We offer for sale a DOOSAN DNM 400A CNC vertical machining center, equipped with a reliable DOOSAN-FANUC i Series control system. The machine is currently in operation and can be demonstrated and tested upon prior arrangement. Technical specifications: Ksdez Dq Iuopfx Ahbedu Manufacturer: Doosan Infracore Model: DNM 400A Year of manufacture: 05/2011 CNC control: DOOSAN-FANUC i Series X-axis travel: approx. 762 mm Y-axis travel: approx. 435 mm Z-axis travel: approx. 510 mm Work table dimensions: approx. 920 × 435 mm Max. table load: approx. 600 kg Spindle taper: BT40 / ISO 40 Max. spindle speed: approx. 8,000 rpm Automatic tool changer Coolant system Power supply: 380 V Rated power: approx. 27.4 kVA Machine weight: 4,500 kg A universal CNC vertical machining center suitable for both single-piece and series production. The combination of a robust DOOSAN design and a FANUC control system ensures easy operation and good service availability. The machine is powered on and can be demonstrated in operation.

Condition: like new (used), Year of construction: 2018, DOOSAN GT 2600 M LATHE YEAR 2018 ONLY: 652 CUTTING HOURS MAX. ROTATING DIAMETER: 630 mm MAX. MACHINABLE LENGTH: 658 mm MAX. MACHINABLE DIAMETER: 460 mm BAR FEEDER CAPACITY: 82 mm SPINDLE SPEED: 35 - 3,500 RPM SPINDLE MOUNT: ASA - 8 TRAVEL: X: 265 mm Z: 680 mm MOTORIZED TURRET Kedpfx Aez D Eq Rohbsdu TAILSTOCK CHIP CONVEYOR TOOL PRESETTING WEIGHT: 5,500 KG

Condition: excellent (used), Year of construction: 2008, DOOSAN MX2000ST 9 AXIS MILL TURN CENTER Sub spindle and bottom Turret Both spindles have 200mm power chucks on at the moment but we also have a Heinbuck collet chuck available good package of tooling Kjdpfx Aeydigmehbedu Shown working on our motorsport jobs all done in one! Can be demonstrated if required.

Condition: excellent (used), Year of construction: 2020, operating hours: 4,000 h, functionality: fully functional, CNC turning center Doosan Puma 700 XLY II Turning length: 5,050 mm Turning diameter: 700 mm with driven tools and Y-axis Basic equipment: - CNC control Fanuc 0i with Manual Guide i - 45" inclined bed in tubular construction - Main spindle with 4 bearings. Spindle bearing accuracy class P 4 - Lifetime lubrication - Internal clamping device hydraulically actuated with internal clamping cylinder Ksdjzlcyuopfx Ahbedu complete with safety device, coolant collection tray, stroke control and draw rod - Automatic central lubrication - Tailstock programmable - Flat bed guides hardened and counter surface coated with Rulon 142 - Coolant system with 7 bar delivery pressure - Guide rail cover Z-axis - Full enclosure - Watertight work area lighting - Integrated alignment screws and mounting plates Including Doosan options: - Tailstock programmable (towed by the turret) - Oil skimmer - Coolant system with 14 bar delivery pressure - Electronic tool breakage monitoring - Automatic tool measuring arm - 3-color warning light - Clamping force monitoring - Additional handwheel - NC option Arbitrary Speed Threading - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; straight ER50 - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; angled ER50 - Preparation for programmable hydraulic steady rest (includes complete basic body, connected to open/close the steady rest via M-function and the basic body can be automatically positioned in the Z-direction, towed by the cross slide without the steady rest) Schunk ROTA NC 630-180 2520-Sv90" Chuck diameter 630 mm Manufacturer Schunk with involute gearing 90" incl. flange and draw rod adapter Steady rest RX6-ZSW-100520 50-SCUW-95 self-centering, hydraulic steady rest, sealed housing (proofline), measuring system for clamping range monitoring (SCU-V), integrated flushing channels / chip protection, flushing nozzles, extra compact design, integrated cylinder with pressure converter. Clamping range from 100mm to 520mm Brinkmann pressure boosting pump 30 bar incl. 50p Mahle filter approx. 30 bar, can be switched on via M-function incl. cartridge filter Coolant gun with its own pump Coolant gun for cleaning the work area when the door is open In automatic operation without function Hinged belt chip conveyor, discharge on the right, inclination angle 50 degrees, discharge height 1150 mm Chip cart Type SKM750; 0.75m3 volume; 1000kg load capacity; with rollers and forklift pockets

Condition: used, Year of construction: 2006, CNC lathe, 2-axis Doosan S280N, year 2006 Ksdpjz Rpg Dsfx Ahbjdu Fanuc Oi Mate TB control Chuck diameter: 210mm (8 inches) Spindle bore: 51mm Turning length: 320mm Max. turning diameter: 280mm 10-tool turret Tailstock Parts catcher Chip conveyor with tank and pump Machine documentation

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. Kdedey Tmlmjpfx Ahbsu A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display - 12.000 RPM spindle 28 kW, 159,3 Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -tool load monitoring -tool breakage detection with needle -automatic doors -robot interface -4th axis preparation -HIWIN RCV-320 rotary table -HIWIN RTS-320 support -Hydraulic aggregate 200 bar 3 A+B -preparation for rotary table hydraulic 2x(3A+B) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, DIESEL COMPRESSOR DIESEL DOOSAN 7/20, recently serviced!!! Compressor with documentation for registration in Poland. Technical specifications: capacity: 2.00 m3/min; working pressure: 7 Bar; engine: KUBOTA operating hours: 295h!!! Kdodpfx Asz Rvznjhbju year: 2023 Compressor is in perfect working order, ready for operation, with warranty. net price: 27,500 PLN gross price: 33,825 PLN Below is a link to a video showing the machine in operation.

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, overall weight: 73 kg, load capacity: 20 kg, arm reach: 1,700 mm, pivoting range: 360 °, controller manufacturer: Doosan Robotics, controller model: DSC, teach pendant manufacturer: Doosan Robotics, teach pendant model: TP, input voltage: 220 V, input current: 6 A, type of input current: AC, repeat accuracy: 0.05 mm, Doosan Robotics H2017 Collaborative Robot (Cobot) – 20 kg payload, 1700 mm reach. The robot has been used for laser welding and is in as-new condition with only 260 operating hours. It is fully functional and ready for immediate deployment. The robot is delivered complete with a stand, which is included in the price. The stand is designed to be easily moved with a pallet jack, allowing flexible positioning in the production environment. The laser welder (Gweike 1500W) is available as an add-on for 15,000 EUR – contact us for more information. Please note: The robot is not CE certified in its current configuration. Technical specifications: - Payload: 20 kg - Reach: 1700 mm - Degrees of freedom: 6 Kdsdpfxjzia Evs Ahbou - Repeat accuracy: ±0.05 mm - Robot weight: 73 kg - Input voltage: 220V AC - Protection rating: IP54 (robot body) - Controller: Doosan Smart Controller (DSC) The robot is equipped with built-in force/torque sensing on all 6 joints, enabling safe human-robot collaboration without safety fencing in many applications. It supports Doosan's intuitive programming environment and is compatible with a wide range of end-of-arm tooling and accessories. Suitable for: laser welding, laser cutting, machine tending, palletizing, assembly, material handling, and other industrial applications.

Condition: used, Year of construction: 2001, functionality: fully functional, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, feed length X-axis: 240 mm, feed length Z-axis: 580 mm, overall weight: 4,100 kg, CNC Turning Machine, 1-Turret Manufacturer: Daewoo / Doosan Model: Puma 230A Year of Manufacture: 2001 Serial Number: XXXX Control System: Fanuc 18-T Operating Hours: Unknown Technical Specifications: Kodpfxszzd I So Ahbodu ----- - Turret: 12 stations, BMT - Spindle Speed: 6,000 rpm max. - Bar Capacity: Ø 45 mm - X-axis Travel: 240 mm - Z-axis Travel: 580 mm - Hydraulic steady rest (following type) - Chip conveyor - Tool measurement system - Machine Weight: 4.2 t - Loading onto a truck is included in the price Accessories: ----- - Documentation - 2x Foot switches - 1x 3-jaw chuck - 1x Collet chuck, Hainbuch - Tool holder set

Condition: ready for operation (used), Year of construction: 2022, operating hours: 389 h, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm Kdsdpfx Aey E I Hishbou • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) • OPTIONAL: HALTER LoadAssistant Universal Big 70 (Robot) • Gripper for Doosan Universal Big 70 • Rotation Station • Workpiece Support • Base Plate 23 mm / 175 mm Big 70 • Machine Interface Box • () Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2012, travel -x axis 1.630 mm travel -y axis 762 mm travel -z axis 650 mm control FANUC - 0I-MD Kodpfx Ahszw N E Iobodu Spindle speed 12.000 min -1 weight of the machine ca. 13 t Milling machining centers - vertical | DOOSAN - DNM 750 equipped with 30-way tool changer, ITC (20 bar) and chip conveyor. The machine only has 13.686 spindle hours. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM750 | DNM-750

Condition: excellent (used), Year of construction: 2019, Swing over bed 900mm, Swing over saddle 690 mm, Maximum turning diameter 650mm, maximum turning length 3070mm, bar capacity 165.5mm, Spindle speed 1,500rpm, milling speed 4,000rpm, spindle power 45/37KW, 12 station turret, Kodpfjz Ehvfex Ahbedu Fanuc I Plus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 8,235 h, Internal combustion forklift Machine brand: DOOSAN Model: D90S-5 Year of manufacture: 2012 Hour meter reading: 8235 Kjdpfxez E S Eqe Ahbodu Own weight (kg): 12197 Load capacity (kg): 9000 Lifting height (mm): 3100 Side shift forks Mast type: STD Fuel type: diesel Recently underwent a major technical inspection at 8060 operating hours. - new tires - new forks - cylinder regeneration - transmission: discs + seals - brakes: discs and bearings - all oils, fluids, and filters Technical condition: used, good

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 30,280 h, The Doosan DL550 machine shown in the picture is for sale in good condition. Bucket size: 5.8 m3. Regularly maintained, ready for immediate operation. It can be viewed while in operation. Technical specifications: Category: Wheeled loader Operating hours: 30,280 hours Emissions sticker: 4 (Green) Year of manufacture: 2014 Equipment: Central lubrication system; Four-wheel drive; Particulate filter Tire condition: 75%. Delivery: EXW Székesfehérvár, Hungary. An optional 16 m3 bucket is available at an additional cost. Kedpfx Ahezd Sk Hsbedu

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z; 1300 x 670 x 625mm, Table size 1500 x 670mm, maximum table load 1300 kgs. min-max height spindle to table 150-775mm, Kdsdpfxezzzwqo Ahbou spindle speed 12,000rpm, spindle taper BT40, 30 station ATC spindle power 18.5 Kw, Fanuc OI series control, Through spindle coolant.

Condition: used, Year of construction: 2022, functionality: fully functional, DOOSAN PUMA GT 3100 M – UNUSED, PRE-OWNED MACHINE WITH ROBOT CELL A Doosan Puma GT 3100 M, manufactured in 04/2022, which has never been used in production after commissioning by the supplier (February 13, 2023). 0 production hours, no workpiece contact, technically and visually in new condition. Includes a factory-installed robot cell for automated loading. Origin: Liquidation of a user's operations in the Nuremberg area. On-site or video call inspection possible. KEY FEATURES - 12″ main spindle, high power and high torque for steel and stainless steel machining - Driven tools VDI40/BMT 65P, milling, drilling and threading from the turret, complete machining in a single setup - Programmable tailstock with servo drive (Z2 axis) - Siemens Sinumerik 828D with 15″ touchscreen and ShopTurn workshop programming - 30° inclined bed, FEM optimized, cast iron - Halter LoadAssistant Universal Big 70 robot cell, mounted and ready for operation (see photos) FACTORY-INSTALLED SPECIAL EQUIPMENT (installed on the machine) - 24-tool turret BMT 65, Hirth gearing (1 s/position) - Automatic tool measuring arm (tool setter) - Tailstock programmable, hydraulic clamping, mount for rotating center - Auto-power-off after program end - Automatic door with servo drive - Three-jaw power chuck Ø 305 mm (12″) with hydraulic draw-in mechanism - 3x Eppinger driven tool holders (drilling/milling head, VDI40/BMT 65) - LNS hinged belt chip conveyor and LNS Turbo HB coolant filtration system Ksdpfjzi Da Rjx Ahbedu - Dormatec ADF oil mist extraction system (filter level 99.97 %, 65 dB) - 20 kVA transformer separately wired - Absolute encoder on all axes HALTER LOADASSISTANT UNIVERSAL BIG 70 (Automation) A Halter robot cell with a Fanuc six-axis robot M-710iC/70 is mounted on the machine (see photos: robot arm with Halter lettering directly on the machine). Cell equipment: - Fanuc robot M-710iC/70, payload up to 70 kg - Workpiece placement via rotary table/loading tray - Workpiece-specific grippers for loading the main spindle - Safety enclosure The cell is designed for this machine and is ready for operation, eliminating the need for additional investment in automation. CONDITION Used machine, unused, no operating hours since installation at the original buyer. Sold "as is", warranty excluded (used machine). Inspection recommended before placing an order. OUR SERVICE On-site or online inspection in the Nuremberg area, transport, installation and commissioning as a separate package upon request, direct German-speaking contact person for spare parts and support, financing possible via leasing/hire-purchase partners, member of the FDM, the German trade association for wholesale trade in machinery and tools. Since this is a single unit, subject to prior sale. Call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: like new (used), Year of construction: 2012, operating hours: 5,323 h, DOOSAN DNM 500 MACHINING CENTER CNC DOOSAN – FANUC i Series MANUAL GUIDE ONLY 5,323 CUTTING HOURS! YEAR OF FIRST INSTALLATION: 2012 TABLE SIZE: 1,200 mm x 540 mm TRAVELS: X: 1,020 mm Kedpfx Aez Hyyrehbedu Y: 540 mm Z: 510 mm SPINDLE SPEED: 12,000 RPM TAPER: ISO 40 INTERNAL SPINDLE COOLING / HIGH PRESSURE TOOL CHANGER: 30 POSITIONS NEW MIST EXTRACTION UNIT / AIR FILTRATION SYSTEM, TOP-MOUNTED, LOSMA BRAND CHIP CONVEYOR HIGH-PRESSURE PUMP WEIGHT: 7,000 KG COMPLETE DOCUMENTATION

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, a very stable machine that operates without any issues – it is only used for machining aluminum plates. Kdodpfx Aozmzcqjhbju

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller Ksdpjv Iq Ezefx Ahbodu MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2020, DOOSAN PUMA 3100LY FANUC control YEAR OF MANUFACTURE: 2020.11 Chuck size: 12 inches Kdodozc Nznepfx Ahbsu Max. turning diameter: 420 mm Max. turning length: 1285 mm Bar diameter: 102 mm Z-axis travel: 1350 mm Y-axis travel: 130 mm X-axis travel: 293 mm TAILSTOCK Live center: SMW AUTOBLOCK - Chip conveyor included - Documentation

Condition: like new (used), Year of construction: 2020, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 630 mm, turning diameter: 376 mm, spindle motor power: 18 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 81 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, bar passage: 81 mm, total height: 2,170 mm, total length: 4,400 mm, total width: 2,100 mm, overall weight: 6,650 kg, spindle diameter: 254 mm, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​6-axis CNC lathe with counter spindle, live tools and Y-axis and FANUC 0i-TF PLUS CNC Kdjdpfxjzrmiao Ahbju

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: i Series, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DOOSAN DNM 5700 was manufactured in 2021. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • 2 units available • CNC control: FANUC i Series (15" display, 2 MB program storage / up to 1,000 programs, Ethernet connection) • Rapid traverse X: 36 m/min • Rapid traverse Y: 36 m/min • Rapid traverse Z: 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Coolant gun • Ball screw nut cooling • Tool breakage detection in the magazine • Automatic doors • Robot interface • Preparation for 4th axis • Coolant level sensor • Mist collector interface Kedpez N E Dvjfx Ahbodu Additional equipment • LNS MH500 chip conveyor • Belt-type oil skimmer • HIWIN RCV 250 rotary table (4th axis) • HIWIN RTS 250 support (tailstock/support for 4th axis) • Hydraulic unit 200 bar, 2 A+B • Hydraulic fixture support for 4th axis • Seat air check Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DOOSAN DNM 5700 was manufactured in 2021, 3 units available. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a 30-position tool magazine and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • 3 units available • Condition: Excellent (used) Kedoz I Tkgspfx Ahbodu • Functionality: Fully functional • 15" display • 2 MB part program storage / 1,000 programs • Rapid traverse X-axis: 36 m/min • Rapid traverse Y-axis: 36 m/min • Rapid traverse Z-axis: 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Ethernet connection • Ball screw nut cooling • Tool breakage detection in magazine • Automatic doors • Standard-height column • Hydraulic system 3A + 1B • Seat air check • Coolant level sensor Additional equipment • Robot interface • 4th axis • Hiwin RCV 250 rotary table • HIWIN RTS 250 support • 4th-axis fixture support hydraulic • LNS MH500 chip conveyor • Oil skimmer, belt type • Coolant gun • Mist collector interface Technical Specification Taper Size BT 40