Used Doosan Dx 520 Lc for sale (287)

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller manufacturer: FANUC, controller model: Series 21i-MB, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 60, number of axes: 4, This 4-axis DOOSAN ACE HC-500 was manufactured in 2005. It features an X-axis travel of 850 mm, Y-axis travel of 700 mm, and Z-axis travel of 750 mm. The machine includes a robust pallet size of 500 x 500 mm with a maximum pallet load of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN ACE HC-500 horizontal machining centre we have for sale. Contact us for further details. • Distance spindle face to pallet center: 150–900 mm • Distance spindle center to pallet surface: 50–750 mm • Pallet size: 500 x 500 mm • Max. pallet load: 500 kg • Spindle orientation built-in sensor • Through-spindle coolant: 70 kg/cm², max flow 20 L/min, pump power 3.7 kW • Spindle completely overhauled in 2023 • Z-axis ball screw replaced in 2020 Isdpfeyxpplsx Ag Ieat Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,193 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, spindle motor power: 15,000 W, controller manufacturer: FANUC, controller model: F0i, number of axes: 2, Horizontal turning machine manufactured in 2018. This DOOSAN Lynx 2100A features a maximum turning diameter of 350 mm and a turning length of 330 mm. It is equipped with a spindle speed of 5,000 rpm and a chuck size of 8” (210 mm). If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 2100A machine we have for sale. Contact us for further details regarding this machine. • Control: Fanuc F0i • Operating hours: 6,193 h • Spindle: 8" chuck (210 mm); bar capacity Ø52 mm • Capacity: Max turning diameter Ø350 mm; max turning length 330 mm • Axes: rapid traverse X/Z 30 m/min • Turret: 12 stations; tool change time 0.15 s; tool shank 25 x 25 mm; boring bar Ø32 mm • Tailstock: Programmable with rotating tip • Certification: CE • Software/monitoring: Doosan tool load monitoring system Additional equipment • Basic tool holder set • Oil mist extractor • Transformer • Bar feeder preparation • Workpiece catch with collection box • Automatic tool gauge • High-pressure cooling 7 bar (1.1 kW) • Oil separator • Chip collector • Electrical noise suppression Technical Specification Counter Spindle No Driven Tools No Iajdpfxsyxhqzo Ag Iot

Condition: used, Year of construction: 2019, x-travel 1300 mm y-travel 670 mm z-travel 625 mm control Siemens Sinumerik 828D weight of the machine ca. 8500 kg Iedpfsyzt Anex Ag Ieat

Condition: like new (used), Year of construction: 2022, 3-Axis CNC Lathe Iaedpfxoywthvs Ag Iet Type: Puma GT 2600 LM Manufacturer: Doosan Year of manufacture: 2022 New Fanuc i Series Plus touch control 12-inch Samchully hydraulic chuck Maximum turning diameter: 410 mm Maximum turning length: 1030 mm Spindle bore: 81 mm Spindle speed: 3500 rpm Turret: 12 positions BMT 55 Driven tool speed: 5000 rpm X: 265 mm Z: 1100 mm C: ±360° LNS chip conveyor Tool probe MT5 tailstock Including: 4 driven tool holders 2/2 8 standard tool holders Total: 12 pcs Documentation Machine as new, only 1,800 operating hours Available for inspection in our warehouse

Condition: excellent (used), Year of construction: 2020, operating hours: 3,833 h, functionality: fully functional, Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and sub-spindle. Manufacturer: Doosan Model: MX 2600 ST Year of manufacture: 2020 Condition: Very well maintained, machine comes from a site closure. Operating times: Control on: 13,127 hours Run time: 3,833 hours Machining time: 2,835 hours The upper head is fed by a tool magazine and can be rotated or milled at various angles. Even highly complex components can be fully machined without additional repositioning. CNC Control: Fanuc 31i-B Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/cont.): 76/76 mm Y-axis travel: 230 mm (±115 mm) Chuck (sub-spindle) ASA mount: A2-8 Spindle speed: 4,000 rpm AC motor power (cont./30min.): 22/26 kW Iajdpeywkw Iofx Ag Iot Turning/Milling head B-axis rotation / indexing: 240° (±120°) Tool interface: Capto C6 Spindle speed: 12,000 rpm AC motor power (30min.): 15/18.5 kW Number of tools: 40 (Opt. 80) Turret Number of driven tools: 12 (12) Driven tool power: 7.8 kW/30min. Weight: 15.5 t.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3-axis DOOSAN DNM 5700 was manufactured in 2017. It features an X-axis travel of 1050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine includes a table size of 1300 x 570 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Operating hours: 1,495 h • Travels: • Rapid traverse (X/Y): 36 m/min • Rapid traverse (Z): 30 m/min • Spindle: Iaodpoyv Ezrofx Ag Ijt • Torque: 117.8 Nm • Taper: CAT 40 • Table: • Size: 1300 × 570 mm • Tooling: • Tool changer: 30 positions

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, overall weight: 3,100 kg, number of axes: 2, Horizontal turning machine manufactured in 2021. This DOOSAN Lynx 2100A features a maximum turning diameter of 350 mm and a turning length of 330 mm. It is equipped with a spindle speed of 6,000 rpm and a chuck size of 6” (160 mm). If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 2100A machine we have for sale. Contact us for further details. • Chuck size: 6" (160 mm) • Bar capacity through spindle: Ø52 mm • Max turning diameter: Ø350 mm • Max turning length: 330 mm • Rapid traverse (X/Z): 36 m/min • Tool size: 25 x 25 mm (OD), Ø32 mm (ID) • Turret: 12 stations, tool change time 0.15 s • Tailstock: Programmable with rotating tip • Options/features: Doosan tool load monitoring system; Automatic tool setting; High‑pressure coolant 7 bar (1.1 kW); Oil separator; Electrical noise suppression; Bar feeder preparation • Certification/Power: CE certification; Transformer • Operating hours: 2,898 h Additional equipment • Basic tool holder set • Oil mist extractor • Chip conveyor • Workpiece collecting box (parts collection) Technical Specification Iaodpfxeyvqino Ag Ijt Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,500 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller manufacturer: Heidenhain, controller model: TNC530, table width: 1,200 mm, table length: 540 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,500 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, With chip conveyor and tool holders cone. Isdpfx Agox Ttd Ne Ioat

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, TECHNICAL DETAILS Iajdpfxeyvfvuj Ag Iet Max. turning diameter: 300 mm Max. turning length: 300 mm Spindle bore: 52 mm Main spindle speed: 4,500 rpm Tool turret: 12 stations MACHINE DETAILS Machine weight: 2,200 kg EQUIPMENT Horizontal CNC lathe High-performance main spindle Robust machine construction for high dimensional accuracy Tool turret with fast indexing Compact design with a small footprint User-friendly CNC control High reliability and low maintenance Control: FANUC CNC

Condition: excellent (used), Year of construction: 2019, operating hours: 14,553 h, functionality: fully functional, machine/vehicle number: ML0405-000122, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, bar passage: 51 mm, bar diameter (max.): 51 mm, Equipment: documentation/manual, In addition to the lathe, a TOP AUTOMAZIONI FU350SX bar feeder, year 2020, is also for sale. The price is for the complete set. Iajdpfx Agoyym Sme Ijt

Condition: good (used), Year of construction: 2010, operating hours: 115,503 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, torque: 100 Nm, controller manufacturer: Fanuc, workpiece width (max.): 670 mm, workpiece weight (max.): 1,000 kg, total height: 2,940 mm, total width: 2,750 mm, table width: 670 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 8 bar, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 420 V, type of input current: three-phase, Equipment: documentation/manual, BT 40. No chip conveyor. Iasdpfsyx U Nwex Ag Iot

Condition: used, Year of construction: 2020, operating hours: 634 h, load capacity: 1,600 kg, lifting height: 3,000 mm, fuel type: electric, construction height: 3,000 mm, Equipment: head guard, * Hydraulic fork adjustment * Electric drive Iajdpfx Agjyx R E Uj Iot * Battery charger ----Vehicle number: 11865 Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller DOOSAN FANUC i Series Table size 1630 x 760 mm Table load 1500 kgs X travel 1630 mm Y travel 762 mm Z travel 650 mm Spindle speed 12000 rpm Torque 117 Nm Tool holder type BT40 ATC magazin 30-fold Spindle power 18,5 / 15 kW Weight 14000 Kgs Dimensions LxWxH = 3700 x 4000 x 3090 mm Accessories - Chip conveyor - Coolant unit - Manuals The machine is no more in production but still under power and will be sold because of company liquidation. Good working order. The costs of moving and loading are not within in the machine price.. Iaedpfoyugvajx Ag Ijt

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 8,200 h, load capacity: 9,000 kg, lifting height: 3,100 mm, fuel type: diesel, Equipment: cabin, Diesel forklift Machine make: DOOSAN Designation: D90S-5 Manufacture year: 2012 Iedpfxovfp Rdj Ag Isat Meter readings (mtg): 8235 Unladen weight (kg): 12197 Lifting capacity (kg): 9000 Lifting height (mm): 3100 Side shift forks Mast type: STD Fuel type: diesel After a major maintenance overhaul for more than €7,000 - new tires - new forks - regeneration of cylinders, - gearbox: discs + sealants - brakes: discs and bearings - all oils, fluids and filters Technical condition: used, very good

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,280 h, load capacity: 3,500 kg, lifting height: 5,205 mm, free lift: 1,700 mm, fuel type: gas, mast type: triplex, construction height: 2,515 mm, fork length: 1,500 mm, empty load weight: 5,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,800 mm, LPG forklift Load centre: 500 Mast type: Triplex Technical condition: normal Front tyre type: Superelastic Front tyre condition: 80 - 100% Rear tyre type: Superelastic Isdpfxeytkkfs Ag Ieat Rear tyre condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, roof cover, windscreen, full free lift,

Condition: used, Year of construction: 2023, operating hours: 482 h, lifting height: 4,900 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Bobcat D30NXS diesel forklift, year of manufacture: 12/2023, operating hours: only 482h!, rated load capacity: 3,000 kg, fork length: 1,200 mm, lift height: 4,900 mm, triplex mast, hydraulic side shift, engine: [45.6 kW/62 hp], weight: 4,901 kg, very good condition, fully operational and ready for immediate use! We are happy to provide a leasing or financing offer upon request. Mr. Mihm (Tel. ) will be glad to assist you. For more information, please visit our website. Subject to prior sale and errors excepted. Iaedpfxeyxkucj Ag Iet Power steering, protective roof = Further information = Lifting capacity: 3,000 kg Closed height: 230 cm For more information, please contact Tobias Ebert.

Condition: used, machine/vehicle number: FBA11-2390-00377, Year of construction: 2015, operating hours: 7,513 h, lifting height: 4,750 mm, fuel type: electric, mast type: triplex, gearing type: automatic, battery voltage: 48 V, fork length: 120 mm, color: orange, 2015 Doosan Forklift Type B18T-7 48 volt E0583 2015 Fork positioner Lifting capacity: 1,800 kg Fork length: 1.20 m Triplex mast Including charger Test valid until 10/26 Iasdpfx Asyxg Dmjg Iet = Further Information = Year of manufacture: 2015 Unladen weight: 3,356 kg Lifting capacity: 1,800 kg CE marking: yes Overall condition: average Technical condition: good Visual condition: average

Condition: used, Year of construction: 2018, operating hours: 10,104 h, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 36 m/min, Equipment: chip conveyor, DOOSAN VC 630 5AX (5-AXIS machining center) Model: VC 630 5AX HEIDENHAIN TNC640 NC Year of manufacture: 2018 Condition: Used, very good, still in production Operating hours: 26,290 h Spindle hours: 10,104 h X-axis: 650 mm Y-axis: 765 mm Z-axis: 520 mm A-axis: +30° to -120° C-axis: 360° Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 36 m/min Maximum table load: 500 kg Spindle: 16000rpm 30/24kW Iedpfx Asyxb S Sog Isat Tool holder: HSK 63A Through-spindle coolant: 18 bar Height: 3295 mm Width: 3200 mm Length: 4585 mm Weight: 13500kg

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • Machine includes a rotary indexing magazine • Machine includes a gantry robot Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Technical Machine Benefits Iaodpfoyr R A Esx Ag Ijt • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Extra Information Machine still under power

Condition: used, functionality: fully functional, turning length: 750 mm, turning diameter: 350 mm, spindle motor power: 4,000 W, spindle speed (max.): 4,500 rpm, spindle bore: 65 mm, rotational speed (max.): 4,500 rpm, type of input current: three-phase, bar passage: 65 mm, bar diameter (max.): 65 mm, spindle nose: A2-6, swing diameter over bed slide: 550 mm, overall weight: 3,800 kg, DOOSAN S310SML CNC Lathe with IEMCA MASTER 880MP Bar Feeder Robust and high-performance CNC turning and milling center from Doosan, ideal for precision series production in mechanical engineering. The machine is equipped with a Fanuc Series 18T control system and offers reliable performance as well as high productivity. The DOOSAN S310SML provides a maximum turning length of 750 mm and a maximum turning diameter of 350 mm. The spindle reaches speeds of up to 4,500 rpm with a spindle bore of 65 mm, enabling efficient processing of bar stock. Featuring an A2-6 spindle nose and a swing diameter over bed of 550 mm, the machine offers stable and precise machining characteristics. The powerful spindle motor ensures consistent performance during continuous operation. Additionally, the machine is equipped with an IEMCA MASTER 880MP bar feeder, guaranteeing automated material loading and making the setup ideal for serial production. Technical Highlights: - Control: Fanuc Series 18T - Turning length: 750 mm - Turning diameter: 350 mm - Max. spindle speed: 4,500 rpm - Spindle bore / bar capacity: 65 mm Ijdpfxsyw Rikj Ag Ieat - Spindle nose: A2-6 - Swing over bed: 550 mm - Total weight: approx. 3,800 kg The machine is in good used condition and is ready for immediate operation.

Year of construction: 2019, condition: ready for operation (used), General Data Machine weight 3480 kg Measurements height 1693 mm Main Drive Spindle Speed 6000 RPM Spindle motor power 15 kW Number of axis 2 Control Unit Brand SIEMENS Model SINUMERIK 828D Technical Specification Driven Tools yes Dimensions Machine Length 2540 mm Movement X-Axis Movement 205 mm Z-Axis Movement 560 mm Iasdpfx Ajx D Dp Isg Iet This DOOSAN LYNX 2100LMA was manufactured in 2019. It features a 6-inch chuck, a maximum turning diameter of 300 mm, and a length of 510 mm. The machine offers rapid traverses of 30 m/min in the X-axis and 36 m/min in the Z-axis, with a spindle speed up to 6000 rpm. Ideal for precision turning, it also includes a 12-station turret. Contact us for more information about this machine. Application Types Turning

Year of construction: 2020, condition: ready for operation (used), General Data Machine weight 3850 kg Measurements height 1921 mm Control Unit Brand SIEMENS Model SINUMERIK 828D Dimensions Machine Length 2880 mm Main Drive Number of axis 3 Spindle Speed 6000 RPM Spindle motor power 15 kW Movement X-Axis Movement 205 mm Z-Axis Movement 560 mm Y-Axis Movement 105 mm Technical Specification Iedpfex D Dkrex Ag Ioat Driven Tools yes This 3-axis DOOSAN LYNX 2100LYA was manufactured in 2020, featuring a chuck size of 6 inches, a maximum turning diameter of 300 mm, and a length of 510 mm. It boasts rapid traverses of 30 m/min on the X-axis and 36 m/min on the Z-axis, with a high spindle speed up to 6000 rpm. Consider the opportunity to buy this DOOSAN LYNX 2100LYA horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 18000 kg Iaodex D R R Eopfx Ag Iet Control Unit Brand FANUC Model FANUC 18I TB Main Drive Spindle speed range 2000 RPM Spindle motor power 30 kW Tool taper ASA A2-11 Number of axis 2 Movement X-Axis Movement 380 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 760 mm Z-Axis Rapid Traverse 20 m/min Turret Number of turrets 1 Additional Equipment Holders for External Turning: HO10-25RL (4 pcs) Holders for Face Turning: HF10-25RL (2 pcs) Holders for Internal Turning: HB10-50N (4 pcs), HB10-40N (2 pcs) Reduction Sleeves: BS 40-10, -12, -16, -20, -25 (2 sets) This DOOSAN V740T vertical turning machine was manufactured in 2005. It features a maximum swing diameter of 800 mm, turning diameter of 740 mm, and a turning length of 760 mm. The main spindle supports a rotational speed up to 2000 RPM with a motor power of 30 kW. It includes a 12-position turret and rapid traverse rates of 20 m/min for both X and Z axes. If you are looking to get high quality turning capabilities consider the DOOSAN V740T machine we have for sale. Contact us for further details regarding this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 6500 kg Control Unit Brand FANUC Main Drive Number of axis 3 Movement X-Axis Movement 1020 mm Y-Axis Movement 540 mm Z-Axis Movement 510 mm Additional Equipment Through-spindle cooling Iaodpjx D Igdefx Ag Ist Preparation for 4th axis External cooling unit This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a robust table size of 1200 × 540 mm and axis travels of 1020 × 540 × 510 mm. Equipped with through-spindle cooling and preparation for a 4th axis, it offers enhanced machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500 vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, spindle motor power: 22,000 W, spindle speed (max.): 3,600 rpm, travel distance X-axis: 250 mm, travel distance Y-axis: 50 mm, controller manufacturer: FANUC, number of axes: 6, This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2006. It is a multi-spindle turning machine featuring twin spindles and twin turrets, equipped with a Fanuc 18i-TB control. Key specifications include a maximum turning diameter of 330 mm, turning length up to 500 mm, and bar capacity of 76 mm. Main spindle speed reaches 3500 RPM, while the sub-spindle can go up to 6000 RPM. If you are looking to get high quality turning capabilities consider the DOOSAN Puma TT 2500 SY machine we have for sale. Contact us for more information. • Max turning diameter: 330 mm (12.99 in); upper turret: 390 mm Iasdpfx Agex Rd Hvs Ijt • Max turning length: 500 mm (19.6 in) • Bar capacity (main spindle): 76 mm (2.99 in) • Travels: X 250 mm (9.84 in), Y ±50 mm (±1.97 in), Z 580 mm (22.8 in) • Sub spindle speed: 6000 rpm • Sub spindle motor power: 7.5 / 11 kW • Notes: Series introduced mid-2000s