Used Dnc for sale (133)

Condition: used, Year of construction: 1980, pressure 200 t chamfer lenght 3000 mm distance between columns 2560 mm dayligth 450 mm throat 450 mm adjustment of stroke 240 mm horn length over column outer edge each 175 mm table length 3050 mm Hodpfx Aet Hllpjg Ijnl table width 280 mm table height over floor 820 mm electrics - voltage/frequency 220/50 V/Hz control CYBELEC, DNC60 stroke 250 mm operating pressure 150 bar weight of the machine ca. 15 t dimensions of the machine ca. L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC 60 • lower part of the machine moves down 500 mm to the floor, • at the moment the machine is mounted on a double-T-support; • prism and upper part of the machine in 3000 mm length

Condition: refurbished (used), functionality: fully functional, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: Completely overhauled Warranty: 1-year warranty Technical Specifications: Left-angle stop according to AGA 4383 Longitudinal Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering Hnodpfxoxhg Ibj Ag Iol - Feed speed: 2–50 m/min (stepless adjustment via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in the machine base and pressure beam - Scoring saw adjustable from outside (without opening the safety hood) - Saw unit with controlled DC drive: - Precise positioning (e.g. for cutouts) - Slowed extraction from the cut - Includes safety hood locking, SZ 5008 lamella curtain - Offcut device SP 5004 – Offcuts down to at least 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (can be switched off separately) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: Threshold of 2 mg/m³ is significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - Table length: 3100 mm - Stop depth: 3100 mm Multi-microprocessor control Integrated PC with hard disk Operating system: LINUX Interfaces: serial + parallel, USB Network connectivity (also wireless LAN) Optimize cutting plans in the office and send directly to the machine Multitasking capable Printing function via USB Remote maintenance via Internet (Remote Desktop, TeamViewer) Multilingual dialog programming 15” flat screen + multifunctional keyboard Swiveling control panel Graphical representation of cutting plans and work processes Additional Equipment: Angle Stop Table HP 5043 (front mounted): - Machined steel angle, Pertinax table top - Table size: 1800 × 800 mm Workpiece Support Table HP 5025 (front mounted): - Pertinax surface - Table size: 1800 × 800 mm Air Cushion Device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 Circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 Circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Condition: like new (used), functionality: fully functional, power: 7 kW (9.52 HP), saw blade diameter: 305 mm, total length: 3,100 mm, total width: 3,100 mm, overall weight: 3,000 kg, cutting length (max.): 3,100 mm, cutting height with scoring (max.): 70 mm, feed rate X-axis: 40 m/min, feed rate Z-axis: 50 m/min, space requirement length: 3,100 mm, space requirement width: 3,100 mm, Equipment: rotational speed infinitely variable, scorer, Panel Sizing System SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel saw designed for precise, efficient, and automated cutting of wood-based materials. Ideally suited for industrial applications in joineries, furniture production, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months Hedpfx Agowrn Efs Ionl CE-compliant and dust-tested (limit value < 2 mg/m³) Key Technical Data & Equipment: - Rip saw FM 20-3100 with hardened guides - Automatic forward & return travel of the saw unit (automatic lowering during return) - Feed drive via three-phase gear motor, frequency inverter controlled - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Score saw blade adjustable externally (without opening the hood) - Safety hood locking with lamella curtain SZ 5008 - 3-step cutting height adjustment LA 4143 - 6 cut-out sections in the pressure beam for residual cuts down to 5 mm - Saw motor: 7.0 kW | Scoring motor: 1.1 kW (switchable) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angle pressure device WP 5003 with clamping claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 upper guides, rack-and-pinion guidance - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return: 40 m/min - 6 clamping fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed Pertinax surface in the area of the angle fence Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard disk, parallel & serial interfaces - Network capable (LAN/WLAN), remote maintenance via internet (TeamViewer, Remote Desktop) - USB printing function - Multilingual dialog programming - 15" flat screen, multifunction keyboard on a swiveling control console - Graphic display of cutting plans and processes Software / Programs: - OPTIMAX: Office optimization, waste calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, diskette or online (optional) - Manual, automatic & special operation modes (e.g. grooving, veneered parts) Additional Equipment: - Angle fence table HP 5085: 1,720 x 800 mm | Pertinax overlay - Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax overlay - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, tapered Reliability in Continuous Operation: This machine is in use worldwide – under extreme conditions. Whether in the dry climate of Africa or in high humidity regions of Southeast Asia (e.g. Thailand): The PA 4136 runs reliably in 3-shift operations – 365 days a year – and stands out for its outstanding stability and durability. Warranty: We are so convinced of the quality and stability of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electronic supply parts and wear parts.) 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning, and training available upon request.

Condition: good (used), Year of construction: 2013, operating hours: 11,427 h, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 3,000 rpm, controller model: Heidenhain iTNC 530, TECHNICAL DETAILS Type: Horizontal drilling and milling machine (T-table design) Control: CNC Heidenhain iTNC 530 Travel paths X-axis travel: 3,500 mm Y-axis travel: 2,000 mm Z-axis travel: 1,250 mm Table Table dimensions: 1,800 × 2,200 mm B-axis: 360° continuous rotary table Spindle Spindle speed: 3,000 rpm Spindle diameter: 130 mm Table load: 12 t Feed rate Working and rapid traverse speed: 10 m/min Hnjdpfx Agowc Ryaj Iel Cooling system Internal cooling through spindle: 20 bar (CHOV 20) External cooling: available MACHINE DETAILS CNC system switched on: 41,414 h Total machine runtime: 40,471 Program runtime: 9,805 Spindle runtime: 11,428 Runtime with increased spindle speed: 70 h EQUIPMENT - Blum TC60 touch probe - Heidenhain DNC - Through-spindle cooling - Continuously rotating rotary table - No chip conveyor

Condition: good (used), Year of construction: 2001, functionality: fully functional, power: 9 kW (12.24 HP), pressing force: 125 t, stroke length: 220 mm, throat depth: 410 mm, total length: 4,200 mm, total width: 2,400 mm, total height: 2,500 mm, overall weight: 10,500 kg, controller manufacturer: CYBELEC, controller model: DNC 800, working width: 3,050 mm, distance between stands: 2,610 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 8, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, lower tooling, upper tooling, Hydraulic crowning Hjdjwrx Tmspfx Ag Ijnl CN CYBELEC DNC 800 CN axes: Y1/Y2/X1/X2/Z1/Z2/R1/R2 Hydraulic clamping of punches Segmented tooling MACHINE OFF GROUND Specifications Bending length: 3050 mm Power: 125 tons Throat depth: 400 mm Distance between uprights: 2610 mm Ram stroke: 220 mm Machine dimensions L x W X H: 4200 x 2400 x 2500 mm Weight: 10500 kg Year: 2001 Main motor power: 9 kW

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Pr4 100/3100 Make: Edwards Pearson Model: PR4 100/3100 MULTI- AXIS Hsdpsw Aw Svefx Ag Ienl Year / new: 1996 Total axis: 6 – 4axis back gauge X R Z1 Z2 Capacity / bed size / tonnage: 3metre x 3100mm x 100ton Cnc control: Cybelec DNC 80 Cnc control Max closing speed 200mm Can be viewed under power

Year of construction: 1994, condition: good (used), machine/vehicle number: 24.105, A used, well-preserved hydraulic press brake HATASTAR equipped with: - CYBELEC DNC 70 control - Controlled axes Y1;Y2;X;R - Hydraulic upper tool clamping - Hydraulic crowning - FIESSLER AKAS safety system - Tools - Press book - Documentation bending length 4600mm Stands width 4100mm Press force 1350kN stroke 220mm Rapid traverse 140mm/sec working speed 10mm/sec Retraction speed 100mm/sec Further tech. data see pdf.- document Tech. Data and dimensions: Errors excepted. Hnjdpfxsfthzke Ag Iol

Condition: used, Year of construction: 1999, pressure 130 t chamfer lenght 3550 mm distance between columns 3060 mm dayligth 510 mm Control Cybelec DNC 80 throat 320 mm stroke 250 mm work height max. 900 mm weight of the machine ca. 12000 kg dimensions of the machine ca. 4,05x2,1x2,85 m Control Cybelec DNC 80 Hedpfovxwqfsx Ag Ijnl Y1;Y2;X;R axis Die shift with hand wheel 4 stop fingers hydraulic stamp clamping WILA hydraulic die clamping System Amada 2 pcs. support arms saftey 2-hand / foot operation Various stamps and matrices