Used Dmg Nef 400 for sale (403)

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, nominal power (apparent): 96 kVA, controller model: Heidenhain, workpiece length (max.): 4,200 mm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 30, Equipment: chip conveyor, Machining Centre DMG DMF 360L Travel paths: X: 3,600 mm Y: 920 mm Z: 820 mm Vertical swivel head, B-axis Spindle: SK40 Spindle speed: 18,000 rpm Pendulum machining with partition wall Chip conveyor 40 bar coolant pump Klodpfxjytp Shj Ahvjp Coolant system incl. paper band filter Tool changer: magazine with 30 positions Control: Heidenhain TNC530 Electronic handwheel 10x SK40 tool holders available on request. Documentation and export possible at extra cost. Machine can be inspected under power. We are happy to send you further details or arrange an on-site inspection.

Condition: ready for operation (used), controller model: Fanuc 310i, empty load weight: 10,000 kg, total length: 4,500 mm, total width: 1,990 mm, total height: 2,300 mm, swing diameter over cross slide: 950 mm, Spindel 1: 20 kW - 5000 tpm - spindelboring: 70 mm Revolverkop 1: 12 aangedreven gereedschappen - 2,5 kW - 4000 tpm Aangedreven C-as X1 uurwerk: 165 mm Y1 beweging: +50/-30 mm Z1 uurwerk: 678 mm Spindel 2: 17 kW - 5000 tpm - spindelboring: 42 mm Revolver 2: 12 aangedreven gereedschappen - 2,5 kW - 4000 tpm Aangedreven A-as X2 uurwerk: 165 mm Z2 uurwerk: 640 mm Iemca Master 880 P staafaanvoer Dia of spindle bore: 70 & 42 mm Power on the spindle: 20 & 17 kW Number of speeds: 5000 rpm Chuck: Ø 175 mm Toolchanger: yes (2x) Number of tools: 12 tools (2x) Kedpev Rwltsfx Ahvelp

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, CNC machining centre DECKEL MAHO DMC 835V Year of manufacture: 2007 Control: Siemens 840D 4th axis (rotary table) controlled incl. touch probe Technical data: Kedpfx Ahoyn Rfrovelp Tool holder: HSK63 Tool changer with 30 positions X-axis: 835 mm Y-axis: 510 mm Z-axis: 510 mm

Condition: reconditioned (used), Year of construction: 2016, CNC Lathe DMG MORI ecoTurn 450 With Siemens 840 D SLIMline control system Year of manufacture: 2016 Kodpfxeyn Np No Ahvjlp Maximum turning diameter: 315 mm Center distance: 685 mm X-axis travel: 224 mm Z-axis travel: 600 mm Spindle bore: 91 mm Maximum spindle speed: 4,000 rpm Includes the following accessories: Sliding guard with interior lighting 12-station turret with 12 driven stations C axis, Y axis +/- 50 mm 5 driven tools VDI 40 60 tool holders VDI 40 HAINBUCH hydraulic collet chuck with foot switch On-machine tool measuring system Workpiece pick-up device Tailstock with quill 4-color signal light Chip conveyor Blow gun Coolant system with reinforced pump, 20 bar Operating manuals

Condition: excellent (used), Year of construction: 2014, CNC controller: M730BM Capacity Y-axis travel mm: ±50 Turning length mm: 510 Max. turning diameter mm: ø 356 Upper turret Number of tool slots St .: 12 Speed ​​driven tools RPM: 10.000 Main spindle Speed ​​spindle rpm: 5.000 Counter spindle Speed ​​spindle rpm: 6.000 Ksdsyn Iatjpfx Ahvelp Automation (Gantry Loader System GX-05 AI) GX-05 AI Gantry Loader package (left-side installation, double gripper hand). 14-station integrated workpiece storage. 20-pallet expanded workpiece storage. Custom gripper jaws for the loader hand. Modified lifting device with sensor and storage mounting device.

Condition: good (used), Year of construction: 2017, 4 axes Travel: X = 730 mm, Y = 730 mm, Z = 880 mm Tool holder: HSK-A63 Pallet changer / shuttle table Number of tool stations: 40 Klsdpsyn Drxefx Ahvjp

Condition: excellent (used), Year of construction: 2010, DMG DMU 80 monoBLOCK, 5-axis Year of manufacture: 2010 Control: iTNC 530 Technical specifications x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 12.000 min/-1 tool taper SK40 swivel milling head B-axis: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg NC rotary table, integrated, C-axis: 360 ° number of toolpositions 2x16 pos. tool taper SK40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 12 t Kodpfoytfn Sjx Ahvjlp dimensions of the machine ca. 4,5 x 4,0 x 2,6 m Accessories/options: - swarf conveyor - replaced X/Y/Z ball screws and spindle in 2019 - full set of documentations - precision vice - tool holders

Condition: ready for operation (used), Year of construction: 2006, DMG DMC75V linear, machining center, 5 axis Year: 2006 x-travel 885 mm y-travel 600 mm z-travel 600 mm control iTNC 530 Heidenhain Max. rpm 1 - 28.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 119 / 85 Nm tool taper HSK A63 Swivel range milling spindle B: -10° / +110° ° Kjdsytd E Nepfx Ahvelp spindle bearing diameter 80 mm table diameter 750 mm rotation range C: 360 ° rotary speed max. 100 min/-1 max. table load 600 kg feed speeds 1 - 90.000 mm/min rapid traverse 90 m/min Feed force X/Y: 13,8 kN Feed force Z: 10,35 kN number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 140 mm max. tool length 300 mm max. tool weight 10 kg max. workpiece height 460 mm Max. Workpiece Area ca. 750 x 600 mm passage max. 600 mm total power requirement 60 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,5 x 4,5 x 3,0 m Accessories/options: - including Fanuc robot - including palettizing system - 28000 rpm Kessler spindle - Through spindle coolant - Swarf conveyor - Clamping system Vice with jaws - full set of manuals

Condition: excellent (used), Year of construction: 2012, operating hours: 4,961 h, functionality: fully functional, travel distance X-axis: 120 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 200 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, overall weight: 1,800 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 4,961 h, spindle nose: HSK-E32, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Including plenty of tool holders and clamping fixtures for dental manufacturing Kledpfxoyr Difs Ahvop

Year of construction: 1999, condition: used, CNC Steuerung Heidenhain TNC 426 Kuehlmitteleinrichtung Spaenewanne CNC control Heidenhain TNC 426 coolant device chip tank Technische Daten / technical details: X-Weg / X-travel 600 mm Y-Weg / Y-travel 525 mm Z-Weg / Z-travel 500 mm Ksdpfodk Rwnjx Ahvelp Spindeldrehzahlen / spindle speed 6300 UpM /rpm Werkzeugaufnahme / spindle taper SK40 Vorschubbereich X/Y/Z / feed range 10000 mm/min. Universaltisch / clamping area of universal table 750x530 mm Gewicht der Maschine ca. / weight 6500 kg

Condition: excellent (used), Year of construction: 1998, operating hours: 54,400 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: 426, spindle speed (max.): 30,000 rpm, 5-axis machining center Manufacturer: DMG Model: DMU-50V Year of manufacture: 1998 Control: Heidenhain TNC-426 Power-on hours: approx. 54,400 h Spindle hours: approx. 12,900 h S/N: XXXXX Technical data: ----- - Travel X-Y-Z: 500 x 380 x 400 mm - NC rotary/swivel table 360° / 500 x 380 mm - Spindle: 30,000 rpm - Tool holder: HSK-50 - Tool magazine: 24 stations - Coolant system - Chip conveyor: no - Automatic tool measurement - Connected load: 26 kVA Klodpeynb Iqjfx Ahvjp - Weight: approx. 4.0 t Accessories: ----- - Manuals - Electronic handwheel - 20x HSK-50 tool holders

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Year of construction: 2011 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX Klsdpfxoym Nfho Ahvsp X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Table speed range: 12 min/-1 Tool Taper: SK 50 Numbers Of Tools In Magazin: 60 Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Kedpfxsym I U Is Ahvolp Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: not inspected (used), Year of construction: 2007, operating hours: 43,558 h, functionality: unexamined, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle speed (max.): 5,000 rpm, spindle bore: 118 mm, controller model: SIEMENS SINUMERIK 840 D POWERLINE, distance between spindles: 900 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates the buyer to collect the item within the specified time frames: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Maximum main spindle speed: 5,000 rpm Maximum sub spindle speed: 3,200 rpm Swing diameter: 270 mm Turning diameter: 120 mm Maximum bar diameter: 100/104 mm Spindle bore diameter: 118 mm Distance between spindles: 900 mm Travel X1-axis: 290 mm Travel Z1-axis: 650 mm Travel X2-axis: 180 mm Travel Z2-axis: 650 mm Travel Y1-axis: ±40 mm Travel Z3-axis: 670 mm Travel X3-axis: 175 mm Rapid traverse X/Z-axis: 30 m/min Rapid traverse Y-axis: 15 m/min Number of tool turrets: 2 Number of tools per turret: 12 All tool positions are driven MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D POWERLINE Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,500 x 2,500 mm Machine weight: 11,000 kg Operating hours: 88,040 h Kjdpfx Aoym A S Iehvslp Spindle hours: 43,558 h EQUIPMENT Chip conveyor Foot switch Note: The machine has the following defects: - The B-axis is defective (located on turret 1) - The guideways and drives are worn in line with the machine’s age - The X2-axis (guide rails) runs slightly out of alignment in the range of 0.03 mm (re-measurement required) - Setting the reference values for the axes in the control system is not functioning - The hydraulic pump was replaced by a spare pump after failure and is now set up externally as a separate unit External reference: Bilstein - Lot 2

Condition: not inspected (used), Year of construction: 2008, operating hours: 39,361 h, functionality: unexamined, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, controller model: SIEMENS SINUMERIK 840 D, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you are obliged to collect the item within the specified timeframe, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter: 640 mm Maximum turning diameter: 640 mm Maximum turning diameter (sub spindle): 400 mm Spindle distance: 1,500 mm Turning length: 1,185 mm Max. workpiece weight: 150 kg Slide travel X1: 550 mm Slide travel Y1: 180 mm Slide travel Z1: 1,185 mm Slide travel B1: 240° Slide travel X2: 180 mm Slide travel Z2: 1,050 mm Slide travel Z3: 1,150 mm Max. milling spindle speed: 12,000 rpm Max. main spindle speed: 4,000 rpm Max. sub spindle speed: 3,200 rpm Rapid traverse rate, Slide 1 (X/Y/Z): 40 / 24 / 70 m/min Rapid traverse rate, Slide 2 (X/Z): 24 / 36 m/min Rapid traverse rate, Slide 3 (Z): 36 m/min Tool holder: HSK 63 Number of tool positions in chain magazine: 40 MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 7,800 x 4,100 x 3,040 mm Machine weight: 16,500 kg Operating hours: 72,899 h Kledpfsym A D Rex Ahvjp Spindle hours: 39,361 h Bar feeder Model: COCCHE GIOVANNI CNC-DB 110 Year of manufacture: 2008 Serial number: CNCDB-08.306 Weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty and requires repair. - The Q2 axis (milling spindle tool changer) fails more frequently. - The X2 axis (guideways) moves slightly askew. - The guideways and drives show age-appropriate wear. External Reference: Bilstein – Lot 1

Condition: good (used), Year of construction: 2013, functionality: fully functional, CNC machining center DMG DECKEL MAHO DMF 260-11 with travelling column, suitable for machining large and heavy components in the energy, engineering, or automotive sectors. The machine is equipped with a modern DMG ERGOline control panel and a robust design for high precision and stability during machining. Technical specifications Axis travels X: 2600 mm Y: 1100 mm Z: 900 mm Table Table size: 3200 × 1100 mm Max. table load: approx. 4000 kg Spindle Max. speed: 10,000 rpm Taper: SK40 / SK50 (depending on configuration) Control system Kljdpeyrrcysfx Ahvsp Siemens / Heidenhain (ERGOLINE panel) Tool magazine Up to 60 positions Machine weight Approx. 25,800 kg Power supply 400 V / 50 Hz Connected load approx. 77 kVA (according to nameplate) Equipment Fully enclosed working cabin Automatic tool magazine Cooling system Chip conveyor DMG ERGOline control panel Paper filtration of coolant

Condition: excellent (used), Year of construction: 2021, operating hours: 7,237 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, torque: 64 Nm, controller manufacturer: Siemens, table load: 600 kg, rotational speed (max.): 10,000 rpm, overall weight: 5,600 kg, operating hours of spindle: 4,048 h, number of axes: 3, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in very good condition and has so far only been used for cutting M8 threads in aluminum. Therefore, the spindle load has also never been particularly high. Equipment: • Renishaw PP40 wireless workpiece probe • Tactile tool measurement system Klodpfxeyftzqs Ahvep • Job Shop package for Siemens 828 D • Chip conveyor • Tool changer with 24 positions • Tool holder for SK 40 DIN69871 and pull stud DIN69872 • Table surface 850x650mm • Drive power 100% duty cycle 9 kW • Drive power 40% duty cycle 13 kW • Torque 43 Nm • Maximum torque 64 Nm • Rapid traverse X / Y / Z 24/24/24 m/min • Coolant spray gun

Condition: good (used), Year of construction: 2003, x-travel 500 mm y-travel 500 mm z-travel 420 mm Klodpfx Ahoymqxcsvjp Control Heidenhain / Millplus total power requirement 35 kW weight of the machine ca. 5,7 t

Condition: used, DMG Mori Panel 85-240VAC 0,3A 2386389 ( 110498 ) Kedpoymqu Rofx Ahvjlp ID-No.: 2386389 Suppl.: 110498

Condition: good (used), Year of construction: 2009, Ref. -No.: 10616 Manufacturer: DMG Type: DMU 210 P Year of construction: 2009 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 257XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Clamping Area: 1.700 mm Tool Taper: SK 50 Spindle Speed: 10.000 RPM Klodpfx Aox R R Hcohvep Max. Torque: 288 Nm Total Power Requirement: 38 kW No. Of Working Stations: 60 Internal cooling: 40 bar Holding torque: 22.700 Nm Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. The machine can be viewed under power.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Kodpfxoyml U Se Ahvslp Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: excellent (used), CNC lathe DMG CLX 450 V3, year 2018, Siemens, in very good condition. Klsdpfox Hqh Ssx Ahvjp

Condition: used, Year of construction: 2013, DMG Deckel Maho DMC 60H Linear Horizontal Machining Centre with Siemens 840D Control, Table Length 500mm, Table Width 500mm, 4 Axis, X Axis 630mm, Y Axis 800mm, Z Axis 850mm, 303 Tools, Spindle Power 20kw, Spindle Speed 18000rpm, Scaper Belt Chip Conveyor with 980 litre Coolant System, Paper Belt Filter, Discharge Height 950mm, Width 380mm, IKZ 80 Bar, 14 litre/min Through Spindle Centre (AD), 12 Pallets, Rotary Pallet Changer, 2 x Pallets 500 x 500mm with T-slots, Load 600kg, Cooling Through Spindle Centre 80 Bar, Tool Magazine, (5 Wheels) 303 Magazine Slots HSK A63, NC Rotary Table Ø630mm, Infrared Measuring Probe Renishaw PP60 Optical (OMP60) hsk.a 63, Mpc Machine Protection Control, Laminated Glass Safety Pane for RH Cabin Door Window, Production Hours: 46048 (2013) Loading is free of charge to a suitable vehicle. Klsdpfx Ahjyrduuovep Removed for convenience of sale now lying at Brescia, Italy

Condition: excellent (used), Year of construction: 2018, operating hours: 3,970 h, functionality: fully functional, turning diameter: 32 mm, spindle speed (min.): 8,500 rpm, type of input current: three-phase, General Machine / Workpiece Data: Type: Swiss-type automatic lathe (8-axis configuration: 6 linear axes + 2 C-axes) Control: FANUC 32i-B CNC with 10.4″ colour display Max. bar stock diameter (main spindle): 32 mm (1.3 in) Max. bar stock diameter (counter spindle): 32 mm (some versions support up to 38 mm with optional components) Max. workpiece length: ~240 mm (9.4″) Axes & Travels: Linear axes: 6 axes (X1, Z1, Y1, X2, Z2, Y2) Ksdpfx Asxwvgrehvjlp C-axes: 2 (main and counter spindle) X-axis travel: ~70 mm (2.8″) Y-axis travel: ~405 mm (15.9″) Z-axis travel: ~100 mm (3.9″) Spindles: Main spindle: Max speed: ~8,500 rpm Power: ~5.5 kW (7.4 hp) Torque: ~40 Nm (29.8 ft-lb) Tooling Total tool stations: up to ~41 (configurable) Driven tools: 8 standard driven tool stations (capable of up to ~6,000 rpm) Simultaneous machining: support for up to 2 tools working at the same time Max bar passage ~33–36 mm Coolant tank ~520 L capacity

Condition: good (used), Year of construction: 2008, Universal Machining Center Machine type: DMG HSC 75 linear Control unit: Heidenhain i-TNC530 Year of manufacture: 2008 New spindle: 2025 Operating hours: 63,133 h Spindle hours: 28,596 h TECHNICAL DATA: Traverse paths: X-axis: 750 mm Y-axis: 600 mm Z-axis: 560 mm Feed rate (X/Y/Z): 90 m/min Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min A-axis: -10° B-axis: +110° Kjdpfsyq H Arjx Ahvelp C-axis: 360° Spindle speed range: 28,000 rpm Tool changer Tool holder: HSK-A63 Tool stations: 60 Tool diameter: 80 / 140 mm Tool length: 300 mm NC rotary table: Ø 750 mm Max. table load: 800 kg Table size: fixed table: 950 x 650 mm Max. table load: 1,000 kg Equipment features: Chip conveyor