Used Dmg Mori Seiki Nhx 4000 for sale (207)

Condition: like new (used), Year of construction: 2015, operating hours: 1,500 h, functionality: fully functional, spindle bore: 118 mm, bar passage: 118 mm, Machine with very few operating hours. As good as new. Machine with a large number of accessories. 20 bar pressure on the coolant. Turret from SMV. Credpfj Afzf Eex Aiisi

Condition: like new (used), Year of construction: 2013, operating hours: 1,450 h, functionality: fully functional, turning length: 1,250 mm, spindle bore: 80 mm, Equipment: documentation/manual, Machine with very few operating hours, almost like a new machine. Machine with a lot of accessories. 20 bar pressure in the coolant. Csdpfxs Afzffs Aiieri

Condition: excellent (used), Year of construction: 2023, operating hours: 12,320 h, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 4,020 h, spindle nose: SK 40, number of slots in tool magazine: 120, Universal Machining Center + Robot Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: 2023 / 2025 Control system: Celos with Siemens 840D sl Operate Technical Data Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed ​​range - main spindle: 20 – 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: Dia. 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 120 pos. Feed rates: Rapid traverse (X/Y/Z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4,020 h Technical features & accessories: - Active spindle cooling - Direct measuring system in all axes - Scraper-type chip conveyor with self-cleaning screen - Internal coolant supply (IKZ) 40 bar, comprising: - Paper belt filter - 600 l tank - Cabin roof - Rotary union in spindle - Duplex filter - Air blast through spindle center - Rotating viewing window - Chip flushing gun - Oil and emulsion mist separator - Infrared touch probe, make Heidenhain TS 460 (if present) - Tool measurement - Heidenhain TT160 (if applicable) - 3D quickSET preparation - PH Cell automation interface, comprising: - Interface - 4-channel rotary union - Automatic loading door - Operating mode 4 - Tracy peripheral surface interpolation - PH 150 pallet loading/unloading system, comprising: - 10-station pallet magazine - External electronic handwheel (if applicable) Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Unless otherwise agreed, sales between businesses (B2B) are always made without warranty. Crjdpfe Agr I Dex Aiisi

Condition: like new (used), Year of construction: 2022, operating hours: 458 h, functionality: fully functional, machine/vehicle number: 1536582684A, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 30 kVA, torque: 83 Nm, workpiece height (max.): 550 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 3,200 mm, total length: 4,500 mm, total width: 3,500 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 4,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13 W, number of spindles: 3, number of slots in tool magazine: 30, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this DMG MORI CMX 50 U universal machining center, in like-new condition. Operating hours: Power-on hours: 458 h / Spindle: 330 h, year of manufacture 2022. TECHNICAL DATA Axis travels: • X = 500 mm • Y = 450 mm • Z = 400 mm • B = -5° / +110° • C = n × 360° Work table: • 630 × 500 mm pivoting rotary table • 7 T 14 H7 grooves, 63 mm pitch • Central hole Ø 30 H6 • Permissible table load: 200 kg • Axis – table distance: 150–550 mm Main spindle (inline spindle): • Speed: 20 – 12,000 rpm • Power: 13 kW (40% DC) / 9 kW (100% DC) • Torque: 83 Nm (40% DC) / 57 Nm (100% DC) • Tool shank: SK40 DIN 69871 • Clamping according to DIN 69872, hydraulic control • Clamping force SK40/BT40: 10 kN Tool magazine: • 30 positions, chain with double gripper • Max. tool diameter: 80 mm (130 mm with adjacent pockets free) • Max. tool length: 300 mm (from the spindle face) • Max. tool weight: 8 kg • Max. magazine load: 120 kg • Tool change time: 2.7 s Feeds and accuracy: • Rapid feed rate X/Y/Z: 30 m/min • Max. feed force (40% DC): 4.5 kN • Linear guide rails with rollers on all axes • Direct measuring system on X, Y, Z (including air purge) • Positioning accuracy X/Y/Z: A = 6 µm (ISO 10791-4) • Repeatability X/Y/Z: R = 5 µm (ISO 10791-4) • Accuracy B/C: A = 16 seconds of arc (ISO 10791-4) • Repeatability B/C: R = 12 seconds of arc (ISO 10791-4) INCLUDED EQUIPMENT Base machine: • CMX 50 U universal machining center (C-A3390F) • DMG MORI SLIMline Multi-Touch 19" / Siemens 840D SL control (C-B3097F) • Coolant or air, switchable via M functions • Chip tray / drawer • Enclosure with sliding door • DMG MORI IoTconnector included as standard 20 bar production package with chip conveyor (C-K3661F): • Internal 20 bar coolant supply • Scraper-type chip conveyor, 250 l tank (left) • Washing of bed and ATC arm via M function • Coolant spray gun • External electronic handwheel • Enclosure roof Crsdpfx Aiez Epnvoisi • 4-color signaling lamp • Double cartridge filter (filter change without stopping the machine) Measurement / monitoring: • Renishaw measuring kit for Siemens (C-K4222F): PP40 probe with optical transmission, TS27R tool probe, measuring cycles with tool breakage monitoring, dummy tool and calibration ring • 3D QuickSET for CMX U (C-K2530F) – control and compensation of 5-axis kinematic accuracy Software and documentation: • DXF Import option on Siemens controller (C-G3067F) • Documentation in Romanian • Screen text in Romanian DMG MORI Digital Products: • Digital production package: IoTconnector, machine data connector MDC (OPC UA / MTConnect / MQTT), NETservice (remote diagnostics) • Messenger V4 – machine status in real time • DMG MORI Service Agent – preventive service warning • Machine 3D model in STEP format (upon signing of NDA, for CAD/CAM) NUMERICAL CONTROL – Siemens SINUMERIK 840D SL • TCU30.3 console, NCU720.3B PN • Safety Integrated • 19" multi-touch screen, 1024 × 1280 • Block processing time: 1.5 ms • User memory 16 MB + 4 GB extension (EES) CONNECTIONS • Standard 12,000 rpm: 30 kVA / 47 A / 50 A fuse at 400 V • With 20/40/80 bar package: 32 kVA / 50 A / 63 A fuse at 400 V • Voltage: 400 V / 230 V, 50/60 Hz, ±10% • Air: 6–8 bar, average consumption approx. 30 m³/h

Condition: used, Year of construction: 2013, operating hours: 10,322 h, functionality: fully functional, machine/vehicle number: NL254130510, We are offering this used DMG MORI NLX 2500 SY/700 CNC turning and milling center, manufactured in 2013, complete with a short bar loader magazine ILS-MKU 70/100, manufactured in 2015. Turning diameter max. 366 mm Turning length 705 mm Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Spindle speed range - main spindle 3,500 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose JIS A-8 Spindle bearing diameter 140 mm Spindle bore 90 mm Max. usable bar diameter 80 mm Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle nose JIS A2-5 Spindle bearing diameter 85 mm Spindle bore 43 mm Max. usable bar diameter (-) mm X-axis travel 260 mm Z-axis travel 795 mm Y-axis travel +/- 50 mm Rapid traverse (X / Y / Z) 30 / 10 / 30 m/min Number of tool positions 12 Tool holder BMT 60 Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 3.7 kW Total power consumption 40 kVA Machine weight approx. 6.4 t Credpozwvv Tjfx Aiiei Short bar loader magazine ILS-MUK 70/100 Type: MUK 10016-II Year of manufacture: 2015 Material diameter: 6-100 mm Material length: 250-1650 mm Length: 2400 mm Width: 1600 mm Outreach: 330 mm Weight: approx. 680 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2016, operating hours: 3,300 h, functionality: fully functional, Manufacturer: DMG MORI Model: ecoMill 70 Year of manufacture: 2016 Control system: Siemens Machining: 3+2 axes Internal cooling (IKZ): available Spindle hours: approx. 3,300 h X-axis: 750 mm Y-axis: 600 mm Z-axis: 520 mm Machining: 3+2-axis positioning B-axis: -10° to +95° Cjdpfjz S Uyrjx Aiijri C-axis: 360° Rapid traverse X/Y/Z: 24 m/min Max. feed rate: 24,000 mm/min The machine is in very good condition.

Condition: good (used), Year of construction: 2020, CNC Turning / Millingcenter Machine type: DMG MORI CLX 750 V4 Control: Siemens 840 D solutionline + Shopturn Year: 2020 SPECIFICATIONS Max. turning length: 1.290 mm Turningdiameter: 640 mm Max. swing over bed: ca. 790 mm Main Spindle: SM127 Spindle nose: A2-11 3-jaw chuck: 400 mm (SMW) mm Spindle speeds: 2.000 rpm Spindle power: 46 / 37 kW Torque: 2.000 / 1.600 Nm Partscatcher A left C-Axis: 0,001° Codpfe Afm Erjx Aiisri Amount of turrets: 1 Tool capacity: 12 Tool: VDI 50 Driven Tools revolution driven tools: 4.000 drive power driven tools : 8 kW X-Axis: 435 mm Y-Axis: 80 +/- mm Z-Axis: 1.290 mm Tailstock Equipment Steady rest: SMW Autoblock dragged bezel support Chip conveyor Tool measurement Direct linear scales Electronical handwheel cooling system: 5-20 bar Chip rinsing pistol Oil mist separator

Condition: excellent (used), Year of construction: 2014, DMG MORI DMC 635V ecoline Year Built 2014 Control : Heidenhian Crjdjxgk Nmepfx Aiiei Spindle 12,000rpm Taper : BT40 ATC 30

Condition: good (used), Year of construction: 2015, Ref. -No.: 10716 Manufacturer: DMG MORI Type: CTX alpha 500 Year of construction: 2015 Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 004xxxxx Tool holder type: VDI 30 X stroke: 260 mm Z - stroke: 550 mm Bar passage: 65 mm Turning Diameter: 500 mm Turning Length: 520 mm Spindle Speeds: 5.000 RPM Spindle Bore: 76 mm Tool changer: 12 Pcs Operating hours: 38.500 Hours Weight Of The Machine Ca.: 4.8 t Codpfx Aie Ahw R Esieri Further information: Including chip conveyor, transport securing equipment, documentation and accessories. The machine has been cleaned and can be inspected under power.

Condition: used, Year of construction: 2017, Manufacturer: DMG MORI, Type: DMU 75 monoBLOCK, Year of manufacture: 2017, Serial number: 12430007443, Operating hours: 28,368, Spindle hours: 11,627, Control system, Manufacturer: Heidenhain, Type: iTNC 530, 21" Operator terminal ERGOline Touchscreen, Tool changer, 63-position SK 40, Travel range X/Y/Z: 735 x 650 x 560 mm, Spindle speed max.: 12,000 rpm, Machine table clamping area: 1,000 x 650 mm, Coolant system, Oil mist extraction, Chip conveyor, Chip cart Credpfxez Tluce Aiiji +++ IMPORTANT: This machine is part of an online auction! +++

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 398 mm, travel distance Z-axis: 214 mm, total height: 1,800 mm, total width: 1,900 mm, product length (max.): 2,200 mm, number of axes: 2, Horizontal turning machine manufactured in 1998. This DMG Mori Seiki CL-200B features an X-axis travel of 398 mm and Z-axis travel of 214 mm. It is equipped with a Renishaw tool setter and a workpiece catcher that has never been used. The machine has approximately 10,000 operating hours and has always been operated in a single-shift environment. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki CL-200B machine we have for sale. Contact us for further details. • Operating hours: approx. 10,000 • Automatic cycle time counter has not reached its limit (indicates relatively low usage) Codpeyxgg Isfx Aiisri • Operated in single-shift environment • Currently under power Additional equipment • Renishaw tool setter • Workpiece catcher (never used) • Röhm chuck, approx. 1.5 years old Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2014, 5-axis machining center Brand: DMG MORI Type: DMU 75 Monoblock Year: 2014 CNC: Heidenhain iTNC530 Equipped with: Integrated rotary table, dia. 600 mm / 600 kg 35 kW spindle – 18,000 rpm 60-position tool changer TS 649 probe 3D quickset 40 bar coolant system 600-liter coolant tank with paper filtration Infrared tool probe Coolant gun Chip conveyor Specifications: Table surface 800 x 650 mm (dia 600 inclinable) Crjdpfsz E R D Sjx Aiioi X-axis travel 750 mm Y-axis travel 650 mm Z-axis travel 560 mm B-axis -/+120° C-axis 360,000° Spindle speed 2 - 18,000 rpm Spindle power 35 kW Spindle taper SK 40 Rapid traverse XYZ 40 m/min Machine dimensions (approx.) 3200 x 2600 x H 2900 mm Weight (approx.) 11,600 kg

Year of construction: 2017, condition: used, spindle speed (max.): 5,000 rpm, turning length: 500 mm, CNC Lathe Crsdpfj Ahkf Sex Aiiei Manufacturer: DMG MORI Model: CTX beta 500 Year of manufacture: 2017 Control system: Heidenhain CNC-Pilot 640 Technical specifications: Turning length: 500 mm Spindle speed: 5,000 rpm Drive power - main spindle: 100/40% duty cycle (ED) 25/34 kW Tool interface: VDI 30 Number of tool stations: 16 positions Spindle operating hours: approx. 3,528 h Condition: used Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: excellent (used), Year of construction: 2018, operating hours: 3,843 h, functionality: fully functional, machine/vehicle number: 320000620, turning length: 1,240 mm, turning diameter over cross slide: 480 mm, turning diameter: 480 mm, spindle motor power: 33,000 W, spindle speed (max.): 3,250 rpm, spindle bore: 115 mm, travel distance X-axis: 307 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, mount diameter: 315 mm, rotational speed (max.): 3,250 rpm, rotational speed (min.): 20 rpm, torque: 630 Nm, bar passage: 102 mm, workpiece weight (max.): 150 kg, feed rate X-axis: 30 m/min, feed rate Y-axis: 22 m/min, feed rate Z-axis: 36 m/min, total height: 2,150 mm, total length: 4,800 mm, chuck outer diameter: 315 mm, total width: 2,100 mm, collet bore: 102 mm, bar diameter (max.): 102 mm, quill stroke: 120 mm, quill diameter: 100 mm, quill travel distance: 1,200 mm, swing diameter over cross slide: 480 mm, spindle nose: A2-8, swing diameter over bed slide: 700 mm, overall weight: 7,200 kg, spindle diameter: 140 mm, tool length: 250 mm, feed force X-axis: 7,000 N, feed force Y-axis: 7,000 N, feed force Z-axis: 11,000 N, turning diameter over bed slide: 700 mm, Equipment: rotational speed infinitely variable, For Sale: DMG MORI CLX 550 CNC Lathe (Model 2018) High-performance 4-axis turning center in excellent condition, ideal for heavy-duty and precision machining. Equipped with key factory options for maximum efficiency and versatility. Control System & Software: CNC Control: DMG MORI SLIMline® 19" Touch Control with Siemens 840D sl Operate Software Option: Integrated DXF Reader for fast, direct import and programming of 2D CAD files Key Technical Specifications & Features: Year of Manufacture: 2018 Control Unit: 4-Axis Configuration Bar Passage / Capacity: Extended Ø 102 mm passage option Spindle Speed: Up to 3,250 rpm Spindle Torque: 630 Nm (40% ED) Turning Capacity: Max. turning diameter Ø 480 mm | Max. turning length 1,240 mm | Swing over bed Ø 700 mm Tailstock Setup: Includes base and hydraulic interface preparation for steady rest Included Accessories & Tooling Package: Tool Setter (Automatic tool measuring probe) Part Catcher & Bar Puller Bar Feeder Interface / Preparation Driven Tooling Included: 1x Angular Driven Tool Holder (90°) 4x Straight Driven Tool Holders Collet Chucks: 2x ER32 & 2x ER40 Crodo Agvvgspfx Aiiji Clean, well-maintained machine ready for immediate production.

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 30, DMG MORI DMU 50, 3rd Generation 5-Axis Universal Machining Center Manufacturer: DMG MORI Model: DMU 50, 3rd Generation Year of Manufacture: 2018 Control System: Siemens 840D sl Operate with CELOS Operating Panel: 21.5-inch ERGOline Multi-Touch Technical Data Machining: Csdj Agnykspfx Aiiori 5-axis simultaneous machining NC rotary table Travel distances: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm Swivel/Rotary Axes: B-axis: -35° to +110° C-axis: 360° Worktable: Clamping area: Ø 630 × 500 mm Maximum table load: 300 kg Main Spindle: speedMASTER motor spindle Spindle speed: 20–15,000 rpm Tool interface: SK40 Spindle power: 21 kW (40% duty cycle) Continuous power: 16 kW (100% duty cycle) Tool Changer: Tool magazine: 30 positions Tool interface: SK40 Feed Rate: Rapid traverse X/Y/Z: 42 m/min Special Equipment Internal coolant supply (IKZ) with 40 bar Coolant system with 600 liter tank Paper band filter system including cabin roof Chip conveyor with scraper chain Double-stage filter, 25 µm, manually switchable Blow-off air through spindle center, selectable via M-function Renishaw PP60 optical infrared workpiece measuring probe (OMP60) Heidenhain TT160 tool measurement Tool length and diameter measurement Tool breakage detection 3D quickSET for checking and correcting machine kinematics ATC – Application Tuning Cycle Electronic handwheel Flushing gun for chip removal Total spindle hours: approx. 18,600 New spindle replaced in 2021 at approx. 5,800 hours

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Year 2014 Heidenhian TNC640 Control Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Credpfxsw Hxiws Aiiei Touch Probe BLUM Tool Measuring system 3D Quick Set Application Tuning Cycle Air Blast through spindle Super Fine filter system c/w tooling ----- Clearance Sales -----

Condition: used, Selective DMG Mori Type: LASERTEC 30 SLM Selective Laser Melting Machine Technical Data: Build Volume: 300 x 300 x 300 mm Layer Thickness: 20-100 µm Materials: Tool steel, stainless steel, cobalt-chromium alloys, titanium, aluminum, precious metal alloys, Inconel Laser: Ytterbium Fiber Laser Laser Type: YLR-600-WC Dimensions: 448 x 580 x 132 mm Crjdpfxozh Dp Ao Aiisi Weight: 40 kg Cooling: Water Central Wavelength Range: 1070 ±10 nm Modulation Frequency: 0-50 kHz Average Power, max. 600 W Power Adjustability: 10-100% Beam Parameter: 0.37 mm x mrad Condition: used Scope of Supply: (See Image) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 2012, CNC Turning / Millingcenter Machine type: Mori Seiki NZX 2000 / 800 SY2 Control: Fanuc 31i A Year: 2012 Available after: KW 50 SPECIFICATIONS Turningdiameter: 200 mm Max. swing over bed: 800 mm Max. turning length: 810 mm Spindle bore: 73 mm Cedpfsz Rl Dxjx Aiieri Bar capacity: 65 mm Main Spindle Max. revolution: 5.000 rpm Spindle power: 25 / 22 kW Torque: 358 Nm Bar capacity: 65 mm Spindle nose: A2-6 C-Axis: 0,001° Subspindle Max. revolution: 5.000 rpm Spindle power: 25 / 22 kW Torque: 358 Nm Bar capacity: 65 mm Spindle nose: A2-6 C-Axis: 0,001° Amount of turrets: 2 Tool capacity: 16 + 16 Driven Tools: 16 + 16 Tool: BMT32 revolution driven tools: 12.000 Y-Axis: 110 mm Req. space (LxBxH): 5.120 x 2.721 m Machine weight: 8.500 kg Equipment Chip conveyor Partscatcher Internal cooling: 70 bar cooling system: Knoll Short Bar Loader: Irco Breuning – ILS MUK 7016 mit Spindelverlängerung Toolholders

Condition: used, Year of construction: 2017, Equipment: chip conveyor, Universal Machining Center Manufacturer: DMG MORI Model: CMX 50 U Year of manufacture: 2017 Control system: DMG MORI SLIMline Technical details: X-travel: 500 mm Y-travel: 450 mm Z-travel: 400 mm B-axis: -5 / +110° C-axis: 360° Table dimensions: 630 x 500 mm Rapid traverse: 30 m/min Spindle speed range: 20 – 12,000 rpm Drive power (40/100%): 13/9 kW Tool holder: SK 40 Number of tool stations: 30 positions Crsdpfxj Agpdns Aiiei Operating hours: approx. 11,605 h Spindle hours: approx. 4,061 h Technical features & accessories: - Chip conveyor - Internal Coolant Supply (ICS) - Coolant spray gun - Electronic handwheel - Direct measuring system (X, Y, Z axes) - Renishaw probe kit - Oil and emulsion mist separator Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools shown, and workholding devices are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 2007, Manufacturer: DECKEL MAHO Model: DMU 50 Year of manufacture: 2007 Machine type: Vertical machining center Application area: Milling Location: Germany Condition: As is, where is Control system: Heidenhain ITNC 530 Number of axes: 5 Travel of X-axis: 500 mm Travel of Y-axis: 450 mm Travel of Z-axis: 400 mm Main spindle speed: 10,000 rpm Spindle speed range: 20 – 10,000 rpm (variable) Tool changer: Chain magazine with double gripper Tool magazine capacity: 30 tool positions Max. tool diameter: 80 – 130 mm (depending on speed) Max. tool length: 290 mm Max. tool weight: 6 kg Table type: Digital swivel-rotary table Table dimensions: Ø 630 mm x 500 mm Max. table load: 200 kg Swivel range of the table: -5° to +110° (total 115°) Drive power: 9 kW (100 %) / 13 kW (40 % duty cycle) Torque: 82 Nm (40 % duty cycle) Measuring system: Direct linear measuring system Codpfxsz An S Rs Aiijri Input resolution: 0.01 mm Positioning tolerance: 0.010 mm Rapid traverse: 24 m/min Feed rate: 20 m/min Coolant tank capacity: 80 l Electrical connection / Power consumption: 17 kVA Maximum current: 28 A Fuse / Network protection: 35 A Voltage: 400 V / 230 V / 24 V Frequency: 50 Hz Installation dimensions (L x W x H): 4,860 mm x 4,350 mm x 2,424 mm Transport dimensions (L x W x H): 2,210 mm x 2,120 mm x 2,150 mm Transport weight: 4,050 kg Manufacturer: DECKEL MAHO — Model: DMU 50 (2007). Machine type: Vertical machining center for milling applications. Condition: As is, where is. Control system: Heidenhain ITNC 530. Number of axes: 5. Axis travels and table: X = 500 mm, Y = 450 mm, Z = 400 mm. The machine is equipped with a digital swivel table (Ø630 mm x 500 mm) with a maximum table load of 200 kg and a swivel range of -5° to +110° (total 115°). Spindle and tools: Main spindle speed up to 10,000 rpm with a variable speed range of 20–10,000 rpm. Tool changer: Chain magazine with double gripper; tool magazine capacity 30 positions. Max. tool diameter depending on speed (80–130 mm), max. tool length 290 mm, max. tool weight 6 kg. Drive and accuracy: Drive power 9 kW (100%) and 13 kW (40% duty cycle), torque 82 Nm (40% duty cycle). Measuring system: direct linear measuring system. Input resolution 0.01 mm and positioning tolerance 0.010 mm. Feed and auxiliary systems: Rapid traverse 24 m/min and feed rate 20 m/min. Coolant tank capacity 80 L. Electrical and transport: Electrical connection / power consumption 17 kVA; Maximum current 28 A; Fuse/protection 35 A; Voltages 400 V / 230 V / 24 V at 50 Hz. Installation dimensions: 4,860 mm x 4,350 mm x 2,424 mm. Transport dimensions: 2,210 mm x 2,120 mm x 2,150 mm. Transport weight: 4,050 kg.

Year of construction: 2017, operating hours: 29,259 h, condition: used, spindle speed (max.): 5,000 rpm, turning length: 500 mm, CNC Lathe Manufacturer: DMG MORI Type: CTX beta 500 Year of manufacture: 2017 Control system: Heidenhain CNC-Pilot 640 Cedpfx Ais Ahkfnsiori Technical data: Turning length: 500 mm Spindle speed: 5,000 rpm Drive power - main spindle: 100/40% duty cycle (ED) 25/34 kW Tool interface: VDI 30 Number of tool stations: 16 positions Operating hours: approx. 29,259 h Spindle hours: approx. 7,351 h Condition: Used Technical features & accessories: - C-axis and spindle brake (hydraulic) - Y-axis ± 60 mm - Programmable tailstock - Hydraulic hollow clamping device, Ø 77 mm - Differential pressure clamping for the main spindle - 16-station disc-type turret, driven tools for all 16 stations - Coolant system 8/20 bar - Belt filter unit (filtration fineness 40 µm) - Level monitoring - Connection port for oil mist separator - Coolant spray gun - TurnPlus Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: good (used), Year of construction: 2014, functionality: fully functional, DMG Mori Sauer Lasertec 65 Shape Year of manufacture: 2014 X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 560 mm Control system: Siemens 840D sl Main spindle: Speed range – main spindle: 20 – 10,000 min/-1 Drive power – main spindle: 13 / 9 kW Max. torque: 83 / 57 Nm Tool interface: HSKA63 DIN 69893 NC rotary table: Table clamping surface: 800 x 650 mm Max. table load: Swiveling range / Rotational range T-slots: 600 B: +/- 120 C: 360 Max. workpiece dimensions: 650 (840) x 500 mm Tool magazine: Number of tool positions: 30 Cjdpfx Aijz Ix Uqoijri Max. tool weight: 6 kg Max. tool diameter: 80 mm Max. tool diameter with free neighboring position: 160 mm Max. workpiece length: 315 mm Tool change time (tool to tool): 1.6 sec Chip removal time: 8.0 sec Feeds: Rapid traverse: 40 m/min Feed force: 7/13/10 kN Feed rate: 1 – 40,000 mm/min Total power consumption: 24 kVA Machine weight: approx. 11.5 t Space requirement: approx. 4.5 x 3.5 x 2.3 m Documentation Coolant system Electrical handwheel Laser head: 100 watts Laser operating hours: 6177 h / 2802 h Machine operating hours: 18703 h / 4738 h

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 950 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 20,000 rpm, spindle motor power: 25,000 W, number of axes: 5, This 5-axis DMG MORI DMU 95 monoBLOCK was manufactured in 2022. It features a working range of 950 mm x 850 mm x 650 mm, 40 bar IKZ and a motor spindle with a speed of 20,000 rpm. The machine includes a double gripper chain magazine with 60 stations and an NC swivel rotary table with a diameter of 850 mm. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 95 monoBLOCK vertical machining centre. Contact us for further details. - Motor Spindle: speedMASTER 20,000 rpm- Spindle Drive Power: 35 kW (40% DC / ED) / 25 kW (100% DC / ED)- Tool Interface / Taper: HSK-A 63 according to DIN 69893 (adapted working spindle and magazine)- Tool Changer: Double gripper chain magazine with 60 tool stations- Rotary Table: NC swivel rotary table, C-axis table surface: dia. 850 mm x 750 mm, integrated into rigid table 1,000 mm x 750 mm- Internal High-Pressure Coolant (IKZ): 40 bar / 23 l/min through spindle centre (AD), frequency-controlled- Coolant Tank / Filtration: Bürener Maschinenfabrik 600-litre coolant unit with paper band filter- Chip Disposal: Scraper flight chip conveyor (discharge height: 950 mm, width: 970 mm) - External Coolant Supply: 4 bar / 40 l/min- Washdown & Flushing: Ring coolant nozzle for vertical headstock (16 water / 7 air nozzles), work area door chip wash, manual spray gun- Spindle Air Blast: Air blast through spindle centre selectable via M-function- Mist Collector: Oil and emulsion mist extraction unit with mechanical filter (throughput volume: 1,100 m³/h)- In-Process Probing: Renishaw PP60 optical (OMP 60) infrared touch probe- Tool Measurement: Blum Laser DIGILOG for vertical tool length and diameter measurement in workspace- Workspace Visibility: Rotating viewing window (Rotoclear) in machine door- Spindle hours: 1.031 h, Machine-On: 2.190 h Technical Specification Crodpfe Ahpm Aex Aiiei Taper Size HSK 63

Year of construction: 2014, condition: ready for operation (used), Optical measurement machine manufactured in 2014. This DMG MORI UNO 20/40 features a travel path of 202.207 mm on the X-axis and 404.397 mm on the Z-axis. It includes a manual SK50 spindle with vacuum clamping and comes with various optional reduction adapters. If you are looking to get high-quality optical measurement capabilities, consider the DMG MORI UNO 20/40 machine we have for sale. Contact us for further details. - Spindle Type: SK50 manual spindle with vacuum clamping- Travel Path X-Axis (min / max): -50.862 mm / 202.207 mm- Travel Path Z-Axis (min / max): 0.102 mm / 404.397 mm- Operating Voltage (U): 230 V- Power Consumption (Pmax): 650 VA- Operating Pneumatic Pressure: min. 6 bar – max. 8 bar (Nominal: 6 +/- 0.5 bar)- Software: Microvision Version V5.1.8.7 (Installed language: German)- Operating System: Windows 7 (German)- PC Hardware: Terra All-in-One PC (Serial No.: R3731075) – Note: Defective / Non-booting- Installed Postprocessors: Fanuc, Tec35, MicrosetCC ITNC530, MicrosetCC_Millplus, Millplus (2Stufen), Siemens 840, TNC- Calibration / Plug Gauge: Calibration arbor SK50 (DMG Microset, ZTP-1898; L=74.98 mm, D=5.94 mm, R=2.97 mm)- Optional Reduction Adapters: * Adapter SK50 to HSK63 * Adapter SK50 to SK40 * Adapter / Calibration arbor SK50 to SK50- Included Peripherals & Accessories: * Terra All-in-One PC (defective) with metal table stand and power supply * USB flash drive with complete device data backup * Standard USB keyboards and computer mice- Maintenance History: Comprehensive service, geometry calibration, and buffer battery replacement completed by HAIMER Microset on 21.10.2025 Crjdj Ahhbqepfx Aiisi

Condition: excellent (used), Year of construction: 2019, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, table load: 1,000 kg, spindle speed (max.): 20,000 rpm, spindle nose: HSK- 63A, number of slots in tool magazine: 60, tool length: 420 mm, Universal Machining Center Manufacturer: DMG MORI Type: DMU 95 monoBlock Year of manufacture: 2019 Control system: Celos with Siemens 840D sl Operate Technical Data Travel ranges: X-axis: 950 mm Y-axis: 850 mm Z-axis: 650 mm C-axis rotation range: 360° A-axis swivel range: +/- 120° Main spindle: Tool holder: HSK-63A Main spindle speed range: 20,000 rpm Main spindle drive power (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Rotary table: Table dimensions: C-axis Ø 850 x 750 mm integrated into Fixed table 1,000 mm x 750 mm Max. table load: 1,000 kg Max. workpiece dimensions: Ø 1,040 mm (clamping capacity) / Ø 850 mm (machining capacity) Height 590 mm Tool changer: Number of tool pockets: 60 positions Max. tool diameter: 80 / 160 mm Max. tool length: 420 mm Max. tool weight: 8 kg Chip-to-chip time: 5.9 s Feed rates: Rapid traverse (X/Y/Z): 40 m/min Feed rate (X/Y/Z): 40,000 mm/min Crsdpfx Aio Agr Igsiji Technical features & accessories: - Tool changing system with double gripper - MPC Machine Protection Control - Production package: Chip conveyor with coolant unit 600 l / 160 Gallons, Paper belt filter Internal coolant supply, 40 bar / 23 l/min, through-spindle (AD) External coolant supply, 4 bar – 40 l/min (theoretical pump capacity) Chip flushing in the cabin door (not a standard coolant unit) - Spray gun 3 bar – 40 l/min - Oil and emulsion mist separator, mechanical filter, throughput 600 m³/h - Renishaw PP60 optical infrared probe (OMP 60) (if present) - Blum laser, tool measurement in the machining area - 3D quickSET preparation - Electronic handwheel (if present) Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Unless otherwise agreed, sales between B&B customers are always made without warranty.