Used Dmg Milltap 700 for sale (382)

Condition: good (used), Year of construction: 2017, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, 5-axis machining center DMG MORI CMX 50 U including robot Year of manufacture: 2017 Control unit: Siemens Operate Technical Data Travel paths: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: -5 to +110° C-axis: 360° Main spindle: Tool holder: SK 40 Spindle speed range: 20 - 12,000 rpm Drive power – main spindle (100/40% duty cycle): 13 / 9 kW Worktable: Table size: Ø 630 x 500 mm Tool changer: Number of tool stations: 30 positions Feeds: Rapid traverse (x/y/z): 30 m/min Operating hours: Spindle hours: Technical features & accessories: - Direct absolute measuring system in x, y, and z, including air purge - Blowing air switching via M-function - Production package, consisting of: • Internal coolant supply 12 bar • Chip conveyor, tank 250 L • Enclosure roof Gbodpfxey Ry N Tj An Rsl • Tool changer door can be opened • Signal lamp • Touch probe PP40 • Tool measurement TS27R • Tool breakage monitoring Robot ROBOJOB Type: Mill-Assist-E Year of manufacture: 2018 Spindle bearings replaced in autumn 2025.

Condition: used, Year of construction: 2014, x-travel 600 mm y-travel 500 mm z-travel 500 mm total power requirement --- kW weight of the machine ca. 9,6 t dimensions of the machine ca. --- m Gbjdpeycxinjfx An Rel

Condition: used, Year of construction: 2014, x-travel 400 mm y-travel 400 mm z-travel 375 mm total power requirement --- kW weight of the machine ca. 7,6 t Gjdpfx Anjycxihe Robl dimensions of the machine ca. --- m

Condition: used, Year of construction: 2004, operating hours: 153,199 h, machine/vehicle number: IntNr231566, For sale is a high-performance DMG Speed 12-7 Linear sliding headstock automatic lathe with FMB Minimag bar feeder. Control: Fanuc 16i-TB with DMG-specific operator interface Year of manufacture: 2004 Technical data Number of axes: 7 axes (X1, Y1, Z1, X2, Z2, C1, C2) Gbodjy Ehdnspfx An Rol Maximum bar diameter: 12.7 mm Maximum turning length: 120 mm Rapid traverse rates: X-axis (linear): 40 m/min Linear drive cooling: Separate cooling unit for thermal stabilization of the linear motor. Z-axis: 30 m/min Main spindle speed range: 0 – 12,000 rpm Drive power: 3.7 / 5.5 kW C-axis: 0.001° resolution for high-precision milling operations Counter spindle speed range: 0 – 12,000 rpm Travel (Z2): 150 mm C-axis: full-featured integrated C-axis Tool carrier (linear slide system) Total tool positions: up to 18 stations Driven tools: 3 to 5 positions for cross machining Max. speed of driven tools: 6,000 rpm Bar feeder: FMB Minimag for bar diameters from 2 to 23 mm. Bar length: 3,020 mm Chip conveyor Compact extinguishing system / Kraft und Bauer automatic fire suppression systems Parts separator Chip flushing system The machine can be demonstrated under power by prior appointment. Technical data and details are subject to change and error. Prior sale reserved!

Condition: used, Year of construction: 2004, operating hours: 145,113 h, machine/vehicle number: IntNr231565, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Technical data MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Gbjdpfx Aoy Ehdbsn Rel COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Small extinguishing system / Kraft & Bauer fire suppression system Operating manual Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, table width: 1,000 mm, table length: 1,250 mm, table load: 3,000 kg, number of slots in tool magazine: 180, Work piece up to 1530 x 1295 x 3500 Kg Tool size up to 650 mm length and 30 Kg Tool size up to 400 x 250 mm and 30 Kg Extende feed rate up to 15 kN-100% ED Coolant Filtration     BLUM Laser NT 3D Quick ser MPC protection 3D Measuring probe DXF Import   Gbjdpfx Ajx Sqpten Rjl Tool package 180 Tool HSK-100A 2 x Cast iron angle plates 1500 mm   15000 Working hours 1e owner machine  X - Travel: 1600mm Y - Travel: 1100mm Z - Travel: 1400mm B-Axis indexing: 360000° Table Length: 1250mm Table Width: 1000mm Table load: 3000 Number of pallets: 2 Feed rate X-Axis: 60000mm/min. Feed rate Y-Axis: 60000mm/min. Feed rate Z-Axis: 60000mm/min. Spindle Taper: HSK-100ISO/Bt/Mk Power on spindle: 52kW Speeds / ranges: 12000Rpm ATC / revolver: 180 Number of controlled axis:4 Length: 9170mm Width: 6320mm Height: 3969mm Weight: 39500kg

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, feed rate X-axis: 40,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 40,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 2,620 mm, total length: 8,400 mm, total width: 3,423 mm, table width: 750 mm, table length: 2,900 mm, table load: 2,150 kg, rotary table diameter: 750 mm, rotational speed (max.): 8,000 rpm, overall weight: 16,000 kg, operating hours of spindle: 8,295 h, coolant supply: 20 bar, spindle motor power: 35,000 W, 5-axis CNC machine (VMC) DMG MORI - DMF 260-7 MACH-ID 9609 Make: DMG MORI Type: DMF 260-7 Control: HeidenHain iTNC530 Year: 2012 Pendel screen to split working area C1 + C2 Duo (NC) Rotary table Ø 750 mm Rotation speed table 50 Rpm indexing 360 Degrees Paper filter with IKZ 40 Bar Rapid feeds in all direction 20.000 mm/Min Work load 8000 Kg Spindel (cutting) hours 8295 H X - Travel: 2600mm Y - Travel: 700mm Z - Travel: 700mm A - Axis: 360000° B - Axis: - 110 to + 110° Table Length: 2900mm Table Width: 750mm Table load: 2150 Table Ø: 750mm Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 8000Rpm ATC / revolver: 30 Gedpfx Ansy Hq Tns Rsbl Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8400mm Width: 3423mm Height: 2620mm Weight: 16000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2015, operating hours: 16,661 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 480 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 845 mm, bar diameter (max.): 67 mm, overall weight: 10,000 kg, controller manufacturer: SIEMENS, controller model: 840 D, number of slots in tool magazine: 48, swivel angle B-axis (min.): 110 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DMG MORI Beta 800 TC was manufactured in 2015. It features a Siemens sl Operate 3G control, a counter spindle with a C axis, and dual chucks on both main and counter spindles. Equipped with a 48-tool HSK 63A chain magazine and a coolant system capable of 8/20 bar, it's ideal for complex turn-mill operations. Consider the opportunity to buy this DMG MORI Beta 800 TC turn-mill centre. Contact us for more information about this machine. • CNC control: Siemens SL Operate 3G, 1 channel, without CELOS • Configuration: Counter spindle ISM 52 with C-axis (instead of tailstock) • Tool magazine: Chain magazine for 48 tools, HSK 63A Gbsdpsx H U Ezjfx An Rel • Coolant system: 8/20 bar, 600 l tank • Chuck rinsing for main and subspindle • Coolant supply to counter spindle Additional equipment • Workholding: • Main spindle: 3-jaw chuck SMW BBD210-66 and DMG TCC 65 collet chuck • Counter spindle: 3-jaw chuck SMW BBD210-66 and DMG TCC 65 collet chuck • Chip conveyor: Hinge type • Preparation for mist collector • Bar machining package Ø 67 mm • Tool measurement probe: Blum B-H7210 • Approx. 40 toolholders (to follow) Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2014, operating hours: 27,608 h, controller manufacturer: SIEMENS, This 5-axis DMG MORI CTX beta 800 TC was manufactured in 2014. It features a main spindle speed of 5,000 RPM and a sub spindle speed of 6,000 RPM, along with a 24-piece tool magazine. Ideal for complex turn-mill operations, consider the opportunity to buy this DMG MORI CTX beta 800 TC turn-mill centre. Contact us for further details regarding this machine. • Tools: 24 pcs • Incl tools shown on the pictures • Excl barfeeder Gbsdpfx Anjx U D Hqe Rel

Condition: excellent (used), Year of construction: 2012, operating hours: 3,355 h, functionality: fully functional, turning length: 450 mm, turning diameter: 200 mm, spindle speed (max.): 5,000 rpm, spindle bore: 51 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 450 mm, overall weight: 3,800 kg, For sale is a CNC lathe from the brand Gildemeister, model CTX 310 Eco. The machine is in excellent condition and ready for immediate use. Technical specifications: Gjdpfx Ajxf T N Ten Rsbl Year of manufacture: 2012 Operating hours: 3,355 h (see picture) Control: SIEMENS SINUMERIK 810D Powerline Max. turning diameter: 200 mm Max. swing diameter over bed: 330 mm Max. turning length: 450 mm X-axis travel: 160 mm Main spindle speed: 5,000 rpm Spindle bore: 51 mm Turret: 12-station turret (VDI 30) Live tooling: 6 driven tool stations Live tool speed: approx. 4,500 rpm Rapid traverse X/Z: 30/30 m/min Dimensions: approx. 4200 mm x 1700 mm x 2300 mm Machine weight: approx. 3,800 kg Chip conveyor included in the offer. Tool holders not included in the offer (can be offered additionally). Transport and loading can be organized across Europe upon request, at extra cost. Prices are exclusive of VAT. Inspection by appointment possible. Contact us — our team is happy to assist you! Trade-in or exchange possible! Machinery trading PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, CNC lathe DMG CLX 450 V3, year 2018, Siemens Slimline control C-axis with driven tools Sauter turret with 12 positions VDI40 Chuck 250 mm Spindle bore 80 mm Godpfx Aex Hqh Sen Rjbl X-axis travel: 267 mm Z-axis travel: 600 mm - Measuring probe - Parts catcher - Tailstock - Chip conveyor - Documentation - 3 driven tool holders included with the machine Cutting hours: 4,600 hours Very good condition

Condition: good (used), Year of construction: 2003, x-travel 500 mm Gbodpfxoy Raluj An Rsl y-travel 500 mm z-travel 420 mm Control Heidenhain / Millplus total power requirement 35 kW weight of the machine ca. 5,7 t

Condition: ready for operation (used), Year of construction: 2018, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1100 mm Y-AXIS TRAVEL: 560 mm Z-AXIS TRAVEL: 510 mm DISTANCE SPINDLE NOSE-TABLE: 120-630 mm RAPID FEEDS X-Y-Z: 30 m/min SPINDLE: 20 - 12000 rpm; 9 - 13 kW; ISO 40 - DIN TABLE SIZE: 1400 x 560 mm Gbodowh Dg Rspfx An Rsl MAX ADMITTED LOAD: 1000 Kg HIGH PRESSURE COOLANT: 12 Bar TOOL MAGAZINE: CHAIN-TYPE ; 30 POS CONTROL UNIT: HEIDENHAIN TNC 620 WEIGHT: 5830 Kg OVERALL DIMENSIONS: 4028 x 2750 x 2950 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL NOTE: WITH No 30 TOOLS-HOLDERS ISO 40

Condition: ready for operation (used), Year of construction: 2012, controller manufacturer: HEIDENHAIN, overall weight: 15,070 kg, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DMG DECKEL MAHO DMF 260|11 was manufactured in 2012. It features a spindle speed of 14,000 RPM and a tool magazine with 30 stations, providing efficient tool management. The machine is equipped with a swivel milling head and an NC rotary table for enhanced versatility. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMF 260|11 vertical machining centre we have for sale. Contact us for further details. • Power consumption: 46 kVA • Voltage: 400 V 3/N, PE • Frequency: 50/60 Hz Gjdpey Nyvwsfx An Rebl • Nominal current (In max): 66 A • Maximum fuse: 80 A • B-axis: Swivel milling head • C-axis: NC rotary table (left side) • Cooling: Cooling unit for drives • Lighting: LED machine light • Axis drives: X/Y/Z feed drives Additional equipment • Spray gun Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2023, Lathes Travel distance X: 495 mm Travel distance Y :125 mm Travel distance Z: 1560 mm turning length: 1540 mm max. turning diameter: 660 mm max. circulation diameter: 660 mm spindle boring: 65 mm range of revolutions till: 5000 rpm powered tools B-axis: ±120° Gbsdpfxey Nxc As An Rel Tool spindle speed: 12,000 rpm Tool magazine: 38 tools Machine weight: 18,800 kg Condition: rarely used, like new

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Chip conveyor, Bar feeder interface, Detachable handwheel, Parts catcher, Milling spindle, Y-axis, Tool setter, Collet chuck, Tooling Gbedpfjy R Az Esx An Rel

Condition: excellent (used), Year of construction: 2014, operating hours: 20,980 h, turning length: 800 mm, turning diameter over cross slide: 340 mm, turning diameter: 500 mm, spindle motor power: 25,000 W, spindle speed (min.): 1 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 76 mm, travel distance X-axis: 300 mm, travel distance Z-axis: 800 mm, mount diameter: 250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, rotational speed (min.): 1 rpm, overall weight: 6,800 kg, DMG MORI CTX beta 800 – CNC Lathe Manufacturer: DMG MORI Model: CTX beta 800 Year of manufacture: 2014 Control: Siemens ErgoLine Technical Data Max. turning diameter: approx. 500 mm Turning diameter over cross slide: approx. 340 mm Turning length: approx. 800 mm Chuck diameter: 250 mm Bar capacity: approx. 76 mm X-axis travel: approx. 300 mm Z-axis travel: approx. 800 mm Tool turret: 12-position Spindle speed: max. 4,000 / 6,000 rpm Gbodpfx Aney R Agbj Rjl Spindle power: approx. 25 kW Voltage: 400 V Frequency: 50 Hz Connected load: approx. 65 kVA Machine weight: approx. 6,800 kg Equipment Siemens ErgoLine operator panel Hydraulic chuck C-axis Chip conveyor Coolant system Precision CNC slant bed lathe Condition Machine can be inspected under power Subject to prior sale Offered without tooling Ex-works location Technical data without guarantee Service Disassembly, loading, and transport possible Europe-wide processing available 📍 Location: Germany 📩 Further information, photos, and videos available upon request

Condition: excellent (used), Year of construction: 2017, operating hours: 13,240 h, turning length: 500 mm, turning diameter over cross slide: 290 mm, turning diameter: 500 mm, spindle motor power: 13,000 W, spindle speed (min.): 1 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 65 mm, overall weight: 4,300 kg, ## DMG MORI CTX alpha 500 – CNC Lathe Manufacturer: DMG MORI Gsdpsy Rzggofx An Rjbl Model: CTX alpha 500 Year of manufacture: 2017 Control: Siemens 840D sl / ErgoLine ### Technical Specifications * Max. turning diameter: approx. 500 mm * Turning diameter over cross slide: approx. 290 mm * Turning length: approx. 500 mm * Chuck diameter: 210 mm * Bar capacity: approx. 65–73 mm * X-axis travel: approx. 190–210 mm * Z-axis travel: approx. 525 mm * Y-axis: optional / approx. ±40 mm * Tool turret: 12 positions * Spindle speed: max. 5,500 / 6,000 rpm * Spindle power: approx. 13–20 kW * Voltage: 400 V * Frequency: 50–60 Hz * Connected load: approx. 30 kVA * Machine weight: approx. 4,300–4,650 kg ### Equipment * Siemens ErgoLine operating panel * Hydraulic chuck * C-axis * Chip conveyor * Coolant system * Precision slant-bed CNC lathe ### Condition * Machine can be inspected under power * Subject to prior sale * Sold without tooling * Ex works * Technical data subject to confirmation ### Service * Dismantling, loading, and transport available * Europe-wide handling possible 📍 Location: Germany 📩 Further information, pictures, and videos available on request

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you the following: Godpfxoy Rx Sts An Rebl Manufacturer: DMG MORI Model: DMU 50 3rd Generation Year of manufacture: 2019 Control system: Heidenhain TNC 640 Technical specifications: Travel distances: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range: 0 – 20,000 rpm Drive power – main spindle (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Worktable: Swivel rotary table, simultaneous operation: D 650 x 500 mm Tool changer: Tool holder: CAT 40 (conversion to SK 40 possible) Number of tool stations: 60 positions Operating hours: approx. 13,500 h Spindle hours: approx. 5,300 h Technical features & accessories: - Active spindle cooling - Direct position measuring system in X, Y, Z, B, C - Scraper-type chip conveyor - Internal coolant supply (ICS) 40/80 bar, consisting of: - Paper band filter - 980 l tank - Cabin roof - Rotary union in the spindle - Blowing air through the spindle center - Dual switch filter - Rotating inspection window - Rinsing gun for chip flushing - Oil and emulsion mist separator - Infrared measuring probe, make: Renishaw PP 60 optical (OMP 60) - Tool breakage control IRS2 - Preparation for 3D quickSET - MPC (Machine Protection Control) - Operating mode 4 - Coolant temperature control for ICS system Accessories, depicted tools, and clamping devices are only included in delivery if specified in the additional information. Subject to change and error in technical data and information as well as prior sale!

Condition: ready for operation (used), Year of construction: 2013, operating hours: 31,460 h, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, table load: 1,500 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 85 monoBLOCK was manufactured in 2013. It features an impressive X-axis travel of 935 mm, Y-axis travel of 850 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,040 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 85 monoBLOCK vertical machining centre we have for sale. Contact us for further details. Gjdpfxjyt Rdrj An Robl • Max feedrate: 40,000 mm/min • Table size: Ø 1,040 mm • Through-spindle coolant: 20 bar • Operating mode 4: machining process control (work with open work area door allowed) • Repairs/maintenance: • C-axis seal replaced just after warranty (improved version) • Spindle replaced (05/2021) • Machine measured last year – circular interpolation (Ballbar) within tolerance • Typical use: • Duralumin machining 80% overall • 3-axis: 50% • 5-axis: 40% (up to 10% 5-axis continuous) Additional equipment • Measuring probe: TS649 • Tool probe: Blum Laser • 3D quickSET • Electric handwheel • Rinsing gun • Chip conveyor • 70-80pcs HSK 63 tool holders (various assemblies) including several end mills, T-mills, 2x sets of KAISER turning heads, JAGER 60,000 rpm electrospindle and more. Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2010, operating hours: 8,510 h, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: 840D solutionline, spindle speed (max.): 18,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5-axis DMG MORI DMU 60 monoBLOCK was manufactured in 2010. It features a working area of 730 mm x 560 mm x 560 mm and a rigid table size of 1,000 mm x 600 mm. The machine is equipped with a motor spindle capable of 18,000 rpm and includes a controlled NC swivelling milling head. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 60 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Tool clamping: Manual • Swivelling milling head: Controlled NC B-axis with hydraulic clamping • Spindle offset: 100 mm • Swivelling range: -120° / +30° (X-axis travel reduced by 100 mm) • Tool changer: Pick-up system, 24 magazine positions • Table: Rigid, 1,000 mm x 600 mm • Control: Siemens 840D solutionline • 3D path control • 3D machining, 3D tool correction • TRANSMIT lateral surface transformation (milling of cylindrical paths - TRACYL) Gbsdpfx Ansy Ndkls Rsl • CompCad compressor function for high-speed machining • Operating mode 4 (manual intervention with doors open) • Probing and calibration: • 3D measuring probe • 3D quickSET toolkit for checking/correcting 5-axis kinematic accuracy • Running time: 30,106 hours (spindle: 8,510 hours) • Note: Soft key buttons on the screen sometimes fail; operation may require the machine’s mouse pad or an external keyboard. Additional equipment • Chip conveyor • Optional: 125 SK40 tool holders Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2015, operating hours: 11,223 h, spindle speed (max.): 20,000 rpm, total height: 800 mm, table width: 650 mm, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 75 MonoBlock was manufactured in 2015. It features an X-axis travel of 750 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a spindle speed of 20,000 rpm and a tool magazine with 60 positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 MonoBlock universal machining centre we have for sale. Contact us for further details. • 5-axis simultaneous machining • Spindle taper: SK 40 • Tool magazine: 60 positions • Internal coolant supply: 40 bar • Spindle Hours: 11,223 h • Machine on hours: 32,851 h • A-axis Range: +/- 120 degree • C-axis Range: 360 degree • Table: Integrated CNC rotary table (diameter 650 mm) within an 800 x 650 mm table surface • Clamping: Hydraulic clamping for the swivel rotary table • Probing: HEIDENHAIN touch probe • Chip Management: Chip conveyor • Coolant: Internal Coolant Supply (ICS / IKZ) 40 bar • Coolant Tank: 600-liter capacity with paper band filter • Cleaning: Wash-down gun (spray pistol) • Extraction: Extraction unit (mist collector) • Table type: Integrated swivel rotary table Additional equipment • Infrared measuring probe Gbodpfjy Ndg Tex An Rjl • Electronic handwheel • Chip conveyor • Internal coolant supply system with paper band filter • 3D Quickset preparation • Coolant ring nozzle • Air blast • Operating Mode 4 (BA4) • Safety glass window • DMG Netservice client • Optional: approx. 80 tools available Technical Specification Through-spindle Coolant Yes Taper Size SK 40

Condition: good (used), Year of construction: 2012, Vertical Machining Center Machine Type: DMG DMF 180 - 7 Control: Siemens 840 D solutionline Year of Manufacture: 2012 TECHNICAL DATA: Travel Paths: X-axis: 1,800 mm Y-axis: 700 mm Z-axis: 700 mm Feed Rate (X/Y/Z): 40 m/min Rapid Traverse (X/Y/Z): 40 m/min Spindle Speed Range: 20 - 14,000 rpm Spindle Motor: 18.9 / 14 kW Tool Holder: SK 40 Tool Stations: 30 Table Size: 2,100 x 700 mm Max. Workpiece Weight: 1,500 kg Workpiece Height: 550 mm Connected Load: 19 kW Space Requirement (LxWxH): 5.533 x 4.231 x 2.693 m Machine Weight: 13,000 kg Features: Chip conveyor Gbsdpjy Rk Nwefx An Rjl

Condition: used, Year of construction: 2002, turning diameter 400 mm turning length 635 mm Gedpfx Aoy I A U Hen Robl control Heidenhain Eltropilot greates pass round over bed 570 mm travel -x axis 220 mm travel -z axis 635 mm main spindle bore 79 mm drive of main spindle 21 kW max. torque on the spindle 240 Nm main spindle speeds: 25-5.000 turning speed range - C-axis 100 U/min feed power in the axis x + z 3,5 / 7 N rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min total power requirement 44 kva weight of the machine ca. 6 t

Condition: used, Year of construction: 2006, turning diameter 600 mm turning length 1250 mm control Siemens 840D Gsdpjy I A Utjfx An Rjbl radial face slide travel 320 mm turning speed range 5-3.000 U/min Number of tools 8 St. total power requirement 42 kva weight of the machine ca. 5,5 t dimensions of the machine ca. 3,6x2,15x1,95 m