Used Disassemble for sale (1,007)

Condition: good (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, total width: 6,300 mm, total length: 15,000 mm, total height: 4,000 mm, overall weight: 2,000 kg, type of cooling: air, Equipment: type plate available, The chamber is in perfect condition and has barely been used. It is currently disassembled, with all its components included (walls, doors, lighting fixtures, ceiling, evaporator compressors). It does not include the refrigerant gas. Everything can be loaded onto a trailer. Hjdpezwmwnefx Acnjt

Condition: used, functionality: fully functional, Year of construction: 1976, control type: manual, degree of automation: manual, actuation type: electric, working width: 600 mm, sheet thickness (max.): 3 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness copper (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 3 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 5 bar, pressure (min.): 4 bar, pressure (max.): 5.5 bar, overall weight: 4,500 kg, total length: 3,000 mm, total width: 2,200 mm, total height: 1,800 mm, Equipment: centralized greasing system, MINO GIOVANI BATTISTA Circular Shears for Cutting Steel Sheets 600 mm x 3 mm – used Coil Slitting Line – MINO GIOVANI BATTISTA + Strip Straightener MINO GIOVANI BATTISTA Max. sheet thickness: 3 mm Max. cutting width: 600 mm Knife sets (more than 50 pieces) Inner coil diameter: 400–550 mm Outer diameter: up to 1,500 mm Max. coil weight: up to 5 tons Decoiler and recoiler with spacers Technical Data Hsdpfx Aceyn Shzenot Drive type: electric Working width: 600 mm Max. sheet thickness: 3 mm Max. steel thickness: 3 mm Power: 22 kW (29.91 HP) Connection voltage: 380 V Frequency: 50 Hz Total weight: 4,500 kg Total length: 3,000 mm Total width: 2,000 mm Total height: 1,800 mm Equipment • Centralized lubrication system • Pneumatic coil removal from decoiler • The machine is powered and currently installed in production Included Free of Charge Along with the circular shears, we provide a sheet metal cold rolling machine free of charge for achieving tight thickness tolerances. MINO GIOVANI BATTISTA – Rolling Machine Model: LAS Power: 6 kW Weight: 4,500 kg Cold rolling machine (for tight tolerances) Max. material width: 130 mm Max. material thickness: 3 mm Decoiler, belt-driven power transmission Prices Circular shears: EUR 11,000 Rolling machine: EUR 3,500 The rolling machine is included in the package at no extra charge, as it was used together with the line. Disassembly and loading costs: EUR 1,800 Delivery Terms Parity: EXW 10290 Zaprešić – Croatia Loading space length: 6 m Width: 2.2 m Total weight approx.: 9 tons Prices are net of VAT – reverse charge Delivery Time The machine is available 10–15 days after payment. The fixed loading date must be announced at least 7 days in advance for organizing forklift and crane.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 8Q00001264, For sale is a powerful and precise Wittmann linear robot W822-1264 for injection molding applications and automation tasks. The unit is packaged and secured on a Euro pallet and comes with the matching handheld device (teach pendant), emergency stop buttons, cabling, and the original technical documentation. The unit is in good condition and fully functional after disassembly. Technical data (according to the nameplate): Manufacturer: Wittmann Kunststoffgeräte GmbH (Vienna, Austria) Model / Type: W822-1264 Article number: 8Q00001264 Year of manufacture: 2015 Payload: 15 kg Travel distances / stroke (X / Y / Z): X-axis (ejection stroke): 550 mm Y-axis (vertical stroke): 1200 mm Z-axis (lateral stroke / main axis): 2500 mm Supply voltage: 360V – 400V (50/60 Hz, 3PH/N/PE) Connected load: 1.9 kVA Weight: 275 kg Scope of supply & components: - Main unit / linear robot Wittmann W822-1264 - Pneumatic / gripper head with C-axis / swivel function and pneumatic valve blocks (SMC). - Including energy chains / drag chains for organized cable and hose routing. - Control system & operating unit - Original Wittmann Teachbox R8 / touch-screen handheld device with protective housing. - Additional handheld unit with emergency stop switch and function buttons. - External button boxes / control elements (including EMERGENCY STOP, quality control part, etc.). - Complete cabling, oil cooler control lines, Harting multi-pin connectors, and pneumatic hoses. - Original folder "Wittmann Technical Documentation" (including circuit diagrams, operating manual, and documentation). Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Hjdezu Rzfopfx Acnet Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit our website.

Condition: used, Year of construction: 2021, functionality: fully functional, Save on liquidity – leasing and hire purchase options available! You are bidding on a Hobart basket conveyor dishwasher, type CN series, in top condition, energy-efficient, with exhaust and wastewater heat recovery. This will save you a significant amount on energy costs in the long term. The machine was first installed in June 2021 in a canteen and was used for lunchtime service. Due to the closure of the business, operations were discontinued. The dishwashing system was newly purchased by the operator and treated with care, and all necessary maintenance was carried out. HOBART presents the new generation of the proven CN series as a powerful PROFESSIONAL version – the new basket conveyor dishwasher stands for greater efficiency and economy, making commercial dishwashing even more sustainable. Professional, powerful, and reliable for the daily challenges in commercial kitchens. Optimal washing results with low energy consumption – even for plastics. The CN basket conveyor dishwasher series has a modular design and operates in a left-to-right configuration, starting with pre-washing, main washing, rinsing, drying, and unloading with a conveyor belt. The disassembly was carried out by the Hobart factory service team. Commissioning will also be carried out by the factory service team, with a contribution to costs, so that the warranty applies. This machine has a recommended retail price of approximately €58,000 net / €69,020 gross. You will receive an invoice with VAT shown. 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. A prerequisite for warranty claims is that the machine is installed and commissioned by an authorized Hobart service team. Hsdjzu Rwmepfx Acnst Technical data: External dimensions of the dishwasher: W: 4215 x D: 2336 x H: 2150 mm. Dimensions are shown in the photo sketch. Passage width: 510 mm Passage height: 440 mm Electrical connection: 400V 3NPE 50Hz; 26.5kW Model: CN-C-A-CDC Serial number: 866707054 Year of manufacture: 2021 Subject to change and errors.

Condition: new, We offer you a new sales shelving unit for purchase. Technical data and further information: Overall height: approx. 1,587 mm Overall depth: approx. 855 mm Overall width: approx. 1,310 mm Special features: - Shelf height can be adjusted individually - Shelves can be installed at an angle (see images) - Castors for flexible storage - All castors are equipped with locking brakes, allowing storage on sloping surfaces - Base frame can be folded up, creating space for a Euro pallet - Material surface: high-quality chrome-plated - Suitable for various industries - Easy and straightforward assembly Included in the scope of delivery: 01x Base frame, new Width: approx. 1,310 mm Hjdpfx Acjhh Dgxonot Depth: approx. 855 mm 01x Back panel, new incl. stabilization hooks 04x Locking castors, new incl. Allen key for assembly 02x Shelves, new Depth: approx. 375 mm 02x Shelves, new Depth: approx. 425 mm 01x Operating manual Please refer to the attached drawing for further details. Notes: The shelving unit will be delivered in disassembled condition and must be assembled on site. This is new merchandise; however, the packaging may have minor damage or dirt accumulation, etc.

Condition: excellent (used), The scope of delivery includes: 02x workbench frames, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Frame height: 900 mm Frame depth: 1,000 mm Includes cross and diagonal braces, base plates The frames are pre-assembled (bolted framework) 04x workbench crossbars, used Material color: RAL 7035 light gray Box profile: 80 x 40 mm Crossbar type: TRV1-240-084-30CE Clear span: 2,400 mm Hjdpji Ewqyefx Acnet 08x locking pins, new Design: fully galvanized 01x chipboard, grade II, used Chipboard thickness: 38 mm Chipboard width: 2,580 mm Chipboard depth: 1,000 mm Surface: possibly coated (possibly in two parts) 01x chipboard, grade II, used Chipboard thickness: 38 mm Chipboard width: 2,380 mm Chipboard depth: 1,000 mm Surface: possibly coated (possibly in two parts) 16x drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images are intended to illustrate the material. The material color may vary. The chipboards may be coated or uncoated. - The workbenches are supplied disassembled; - The workbench frames are pre-assembled; - The production time is usually approximately 5 working days.

Condition: good (used), Note: - The images are for illustrative purposes. - The material color may vary. - The workbenches are supplied disassembled. - The shelving uprights are pre-assembled. - The production time is typically approximately 3-5 working days. The scope of delivery includes: 01 x Used workbench Dimensions: 2,900 x 1,000 x 938 mm Consisting of: 02 x Used workbench uprights Manufacturer: Bito Type: PL 38 Material color: sendzimir galvanized Frame profile: P 25 Profile dimensions: 90x65x2.5 mm Adjustment grid: 75|75 mm Incl. transverse and diagonal braces, Base plates The uprights are pre-assembled (bolted framework) 900 mm high 1,000 mm deep 02 x Used workbench crossbars Manufacturer: Bito Type: PL 38 Material color: green Box profile: 127x50 mm Crossbar type: PT27.127LN Design: Head crossbars Hedpoziy Htjfx Acnot Clip type: 3 HK 2,700 mm clear width 02 x Used workbench crossbars Manufacturer: Bito Type: PL 38 Material color: green Box profile: 127x50 mm Crossbar type: PT27.127LN Clip type: 3 HK 2,700 mm clear width 08 x Used locking pins Used chipboard Material thickness: 38 mm Number of panels: 01 | 2,900 x 990 mm (two-part) 01 | 2,680 x 990 mm (one-part) 16 x Wing nuts Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Dimensions: Width: approx. 2,900 mm Height: approx. 1,038 mm Depth: approx. 1,100 mm Technical data for the workbench frame: Manufacturer: Jung Heinrich Type: T Included in the scope of supply: 02x workbench stands, used Material color: blue Stand height: 1,000 mm Stand depth: 1,100 mm Stand profile: 100 x 65 mm Includes cross and diagonal braces, base plates The stands are pre-assembled (welded framework) 02x workbench crossbeams, used Material color: yellow Box profile: 120 x 50 mm Crossbeam type: HN 120|25 Clear span: 2,700 mm 04x locking pins, used Design: fully galvanized 01x chipboard, 2nd choice, used Hodpfelnfi Rjx Acnet Chipboard thickness: 38 mm Chipboard width: 2,900 mm Chipboard depth: 1,100 mm Chipboards may be in two parts 08x drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images serve to illustrate the material. The material color may vary. - The workbenches are delivered disassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), We offer you a used workbench frame for sale here. Dimensions: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in the scope of delivery: 02x Workbench stands, used Material color: sendzimir galvanized Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted frame) 04x Workbench crossbars, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 08x Locking pins, used Design: fully galvanized The images serve to illustrate the material. The material color may vary. Hedpjhvmmtjfx Acnet - The workbenches are supplied disassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: new, Your contacts within our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Included in the scope of delivery: 1x workbench frame, new Material color: anthracite Overall width: approx. 1,400 mm Overall height: approx. 900 mm Overall depth: approx. 600 mm 1x worktop, new Overall width: approx. 1,400 mm Overall depth: approx. 600 mm Notes: - The workbenches are delivered disassembled. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope. Our services at a glance: (Prices on request) Hodeh Euqlepfx Acnjt Assembly and installation Please note our general assembly conditions. Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelving systems. Delivery with our own fleet (without unloading)

Condition: new, We are offering you two new sales shelving units for purchase. Features: - Shelf height can be adjusted individually - Shelves can be installed at an angle (see images) - Castors for flexible storage - All castors are equipped with locking brakes, allowing storage on sloping surfaces - The base frame can be folded up, creating space for a Euro pallet - Material surface: high-quality chrome-plated - Suitable for various industries - Easy and straightforward assembly Technical data and further information: Hsdpshu Apmefx Acnjt Overall height: approx. 1,587 mm Overall depth: approx. 855 mm Overall width: approx. 1,310 mm The scope of delivery includes: 02 x Sales shelving units, new each consisting of: 01 x Base frame, new Width: approx. 1,310 mm Depth: approx. 855 mm 01 x Back panel, new including stabilizing hooks 04 x Locking castors, new including Allen wrench for assembly 02 x Shelves, new Depth: approx. 375 mm 02 x Shelves, new Depth: approx. 425 mm 01 x Operating manual Please refer to the attached drawing for further details. Notes: The shelving unit is delivered in disassembled condition and must be assembled on-site. This is new merchandise; however, the packaging may have minor damage or dirt deposits, etc.

Condition: new, We are offering 10 new sales shelving units for sale. Features: - Shelf height can be adjusted individually - Shelves can be installed at an angle (see images) - Castors for flexible storage - All castors are equipped with locking brakes, allowing storage on sloping surfaces - The base frame can be folded up, creating space for a Euro pallet - Material surface: high-quality chrome-plated - Suitable for various industries - Lightweight and easy to assemble Technical data and further information: Overall height: approx. 1,587 mm Overall depth: approx. 855 mm Overall width: approx. 1,310 mm The scope of delivery includes: 10x sales shelving units, new each consisting of: 01x base frame, new Width: approx. 1,310 mm Depth: approx. 855 mm 01x back panel, new including stabilization hooks Hedpfx Acohu Apujnjt 04x locking castors, new including Allen key for assembly 02x shelves, new Depth: approx. 375 mm 02x shelves, new Depth: approx. 425 mm 01x instruction manual Please refer to the attached drawing for further details. Notes: The shelving unit is delivered in disassembled condition and must be assembled on-site. This is new merchandise; however, the packaging may have minor damage or dirt deposits, etc.

Condition: excellent (used), The scope of delivery includes: 02x workbench stands, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: 800 mm Includes cross and diagonal braces, base plates The stands are pre-assembled (bolted frame) 04x workbench cross members, used Material color: RAL 7035 light gray Hjdpfx Aei Ew Dzscnet Box profile: 80 x 40 mm Cross member type: TRV1-240-084-30CE Clear span: 2,400 mm 08x locking pins, new Design: fully galvanized The images serve to illustrate the material. The material color may vary. - The workbench frames are supplied disassembled; - The workbench stands are pre-assembled; - The production time is usually approximately 5 working days.

Condition: excellent (used), The scope of delivery includes: 02x workbench stands, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted framework) 04x workbench traverses, used Material color: RAL 7035 light gray Box profile: 80 x 40 mm Traverse type: TRV1-240-084-30CE Clear span: 2,400 mm Hsdpfxoi Ewqre Acnst 08x locking pins, new Design: fully galvanized 01x chipboard, 2nd choice, used Chipboard thickness: 38 mm Chipboard width: 2,580 mm Chipboard depth: 800 mm Surface: possibly coated (possibly in two parts) 01x chipboard, 2nd choice, used Chipboard thickness: 38 mm Chipboard width: 2,380 mm Chipboard depth: 800 mm Surface: possibly coated (possibly in two parts) 16x self-drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images are for illustrative purposes only. The material color may vary. The chipboards may be coated or uncoated. - The workbenches are supplied disassembled; - The workbench stands are pre-assembled; - The production time is typically approximately 5 working days.

Condition: excellent (used), The scope of supply includes: 02x workbench stands, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted framework) 04x workbench crossbars, used Hjdpfxei Ew D Ej Acnst Material color: RAL 7035 light gray Box profile: 80 x 40 mm Crossbar type: TRV1-240-084-30CE Clear span: 2,400 mm 08x locking pins, new Design: fully galvanized The images serve to illustrate the material. The material color may vary. - The workbench frames are supplied disassembled; - The workbench stands are pre-assembled; - The production time is typically approx. 5 working days.

Condition: used, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Several production lines for sale: 1 MECATHERM line 2 BENIER/KAAK line Hsdezwf Skepfx Acnjt 1 FRISTCH line for pastry production Still operational at the factory. Possible to visit before disassembly.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,300 h, functionality: fully functional, workpiece weight (max.): 5,000 kg, cutting height (max.): 250 mm, total length: 350 mm, total height: 300 mm, cutting width (max.): 420 mm, total width: 50 mm, control cabinet width: 220 mm, saw blade diameter: 450 mm, rotational speed (min.): 3,000 rpm, overall weight: 5,000 kg, type of input current: three-phase, Weinmann WBZ160 POWERSIX machining/sizing center. Year 2019. Approximately 3300 operating hours. Serviced in July 2026 by a HOMAG technician (report available upon request). Hodpfxszwf Ace Acnot Very good overall condition. Fully functional. Machine has already been disassembled and is ready for loading (packaging done according to supplier specifications). Transport will require 2 covered semi-trailers (to be arranged and paid for by the buyer).

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 TECHNICAL DATA - crucible capacity: 4.4t - tilting furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode 1 - pouring rate: 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average crucible lifespan: 4 – 6 months - furnace equipped with an additional device used to modify the liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including the bottom-pour stopper - Third group – inductor with a power of 120 kW, voltage 380 V 50Hz, whose main task is to heat the liquid metal. The inductor is constantly air-cooled during operation. - Fourth group – switchboard with a built-in transformer, contactors and control station. POURING PROCESS Hjdpfjzfyu Asx Acnot The pouring process proceeds as follows: DISAMATIC 2032 A displays the molds on the conveyor in the correct position. The correct position means that the open pouring basin in the mold is located in a position compatible with the bottom-pour stopper at the bottom of the crucible. If the desired position is achieved, the operator manually (by means of a lever) lifts the bottom-pour stopper in order to fill the mold, until the liquid metal is visible in the outflow. The speed of pouring the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer firebrick lining, where one layer is permanent, but the second is expendable. The permanent lining consists of an insulating layer, which is a lightweight burned stone, and a sillimanite layer. The expendable layer consists of a corundum material, meaning a concrete with a high clay content (94%). Both parts are connected together by means of a special cement. The crucible inductor is located in a lining of Al₂O₃ or MgO and SiO₂, depending on the requirements. The material used to seal the bottom-pour stopper has the quality of chamotte with different clay content. The inductor is assembled to the pouring furnace by means of screws and a sealing compound with the proper plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected together. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN 1. crucible: approx. 4 – 6 months 2. inductor: approx. 12 weeks The lifespan of the ceramics depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts have no direct contact with the liquid metal. PRICE *44,100 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are paid by the Buyer; the price includes additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: new, Schunk Clamping Bolt Zero-Point Clamping System SPA-X 40 (0471155), New 🧰 Product Features • Manufacturer: Schunk • Material: Stainless steel • Condition: New • Variant: Compensating bolt • Holding force M10: 35 kN • Compensation in X: ± 1 mm • Weight: 0.24 kg • Product number: 0471155 💰 Price € 109,- net, excl. VAT Price from 10 units € 99,- net, excl. VAT • Quantity discount: on request • Private sale: No minimum order quantity • Shipping costs: Available throughout Europe, on request • Delivery time: Immediately available • Inspection and collection: Possible at any time by appointment • Product number: P10452 Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock (Changes and errors in technical data, details and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty racking, used & new Description: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of warehouse mezzanines & steel construction mezzanines immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS, USED & FROM INSOLVENCY / BANKRUPTCY SALES: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 Hsdpfjzwc Rwsx Acnet • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND AREA OF BUSINESS: ONLINE AUCTIONS & RESALE For dismantling and clearance orders, we offer a complete, all-round service package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete inventory including a clean sweep of the premises. 2. Commission auction: Conducting auctions on behalf of the client. Our full service provided by our own employees: Cataloging, office preparation, inspection, goods issue, logistics, dismantling and clean hand-over. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: good (used), functionality: fully functional, Equipment: chip conveyor, documentation/manual, For sale used Mori Seiki NHX5000 horizontal machining centre in excellent condition. Model: NHX-5000/40 Year: 2012 Hsdpfxouf S Rzs Acnot The machine is available on site by prior arrangement. Delivery parity: EXW Székesfehérvár. We can assist in disassembling and assembling the machine on request.

Condition: good (used), functionality: fully functional, Item: LC-100826-FristamFPE FRISTAM FPE STAINLESS STEEL CENTRIFUGAL PUMPS Manufacturer: Fristam Pumpen, Germany Pump type: Hygienic centrifugal pumps Series: FPE Material: Stainless steel Condition: Used We offer 3 Fristam FPE stainless steel centrifugal pumps, suitable for hygienic applications in the food, dairy, beverage, and processing industries. Available pumps 1. Fristam FPE 3532 A Type: FPE 3532 A Serial No.: 0438460197 Stainless steel pump housing Hygienic connections 2. Fristam FPE 2552/250A Type: FPE 2552/250A Serial No.: 0458460117 Stainless steel pump housing Hygienic connections 3. Fristam FPE 752/250A Type: FPE 752/250A Serial No.: 0482460083 Stainless steel pump housing Hygienic connections Applications Fristam FPE centrifugal pumps are designed for hygienic processing applications and can be used for transferring various liquid products, depending on the required capacity and product characteristics. Typical applications include: Dairy processing Milk and liquid dairy products Beverage production Food processing Water and process liquids CIP systems Other hygienic liquid applications The pumps have been disassembled and are available from our warehouse in Denmark. Motor power, RPM, and exact capacity are not specified at this time and should be confirmed before purchase. The pumps can be sold individually or together as a package. Location: Denmark Delivery: EXW Denmark Hsdpfszuzc Hjx Acnot Availability: Immediately available

Condition: used, Factory-reconditioned edge processing line for 3 mm edges Manufacturer: IMA Type: Combima Consisting of: Machine 1: Used edge processing machine from IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 1,500 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min Hedpfx Aozuyqvocnot - Motorized width adjustment with electronic setpoint and actual value display - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Milling unit with 1 motor, 4.4 kW, 100 Hz - Hot melt adhesive unit with 2-roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 2 motors, 1.5 kW - Chamfering unit with 2 motors, 0.6 kW - Profile drawing blade unit - Straight drawing blade unit - Edge sanding/buffing unit - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB - 1 used rotating device for changing from longitudinal to transverse - Factory-reconditioned with a 12-month warranty - Max. panel length 2,500 mm, max. panel width 1,500 mm Machine 2: Used edge processing machine, manufacturer: IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 3,000 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Protective milling unit with motor 3.3 kW, 100 Hz - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Enclosed gluing unit with double roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 1 upper and 1 lower motor, 0.4 kW - Chamfering unit with 2 motors, 0.4 kW - Copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear lower workpiece profiles, copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear upper workpiece profiles, profile drawing blade unit - Straight drawing blade - Buffing unit - Center support - Pull-out rollers 800 mm - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB Delivery time after order placement approx. 4-6 months (depending on current workload and scope of desired work). Individual machine configurations are possible according to customer requirements, as the machines are disassembled down to the base frames and reassembled after replacing all wear parts.

Condition: used, Year of construction: 2006, functionality: fully functional, year of last overhaul: 2022, SCHULER GRÄBENER TMK 2-630 – 630 t Punching and Forming Press with Coil Feeding System Manufacturer: SCHULER / Gräbener Pressensysteme Type: TMK 2-630-3.0-50/210 S Year of Construction: 2006 Press Force: 6,300 kN / 630 t Design: Mechanical Punching and Forming Press / Single-Action Press For sale is a SCHULER GRÄBENER TMK 2-630 mechanical single-action press / punching and forming press with a press force of 6,300 kN, including a complete SCHULER automation strip guiding, straightening, and coil feeding system. The system was used for the mass production of punched and formed parts and is currently still fully assembled on site. Technical Data Press Rated Force: 6,300 kN Rated Stroke: 12 mm Stroke: 50–210 mm Stroke Rate: 15–60 strokes/min Max. Flywheel Speed: 960 1/min Ram Adjustment: 200 mm Max. Installation Height: 800 mm Table / Tooling Area: approx. 3,000 × 1,500 mm Max. Tool Dimensions: 3,000 × 1,500 × 800 mm Max. Tool Weight: 12,000 kg Drive Power: max. 280 kW Rated Current: 420 A Compressed Air: 6 bar Hydraulic System: 400 bar Clutch / Brake: 6 bar Permissible Switching Rate Clutch / Brake: 16/min Machine Weight without Accessories: approx. 138,000 kg Coil and Feeding System SCHULER Automation / Gräbener Pressensysteme, Year of Construction 2006. Coil / Uncoiling Unit: Type AC-LH-160-0650 Strip Width: 40–600 mm Coil Outer Diameter: 900–1,800 mm Spreading Range: 470–530 mm Coil Uptake / Uncoiling Strip Guiding and Straightening System Threading / Strip Guiding Devices Automated Material Feeding Roller Guides Conveying / Removal Technology Complete Protective Enclosure Control / Operation SCHULER System Control Siemens SIMATIC Operating Components Siemens SIMATIC OP17 Touch Panel Separate Operating Panel for the Feeding System Setup Operator Devices Unidor Process / System Monitoring Condition and Maintenance The system was overhauled in 2022 for approximately €85,000. The maintenance history has been regularly recorded. Current maintenance and repair records are also available for 2026. The system is fully assembled on site and can be inspected by appointment. Scope of Supply The press system is sold, including the associated SCHULER automation and the existing coil, strip guiding, straightening, feeding, and removal technology, as well as the associated protective enclosure and operating / control devices, according to the existing system scope. Complete Service from a Single Source Upon request, we offer a complete project management service for this system – from financing to installation and commissioning at the new location. Possible Services: Individual financing and leasing solutions Organization and support for disassembly Heavy-load loading and transport International transport and export processing Organization of crane and heavy-load operations Reconstruction and assembly at the new location Support during commissioning Coordination of required service and specialist companies This allows the system to be taken over not only at the current location, but also as a completely organized machine project, depending on the customer's requirements. Location: Germany Availability: by arrangement Inspection: by appointment Disassembly / Transport / Reconstruction: can be completely organized upon request Financing / Leasing: upon request Hodjzv Utnjpfx Acnjt Technical data based on available documents and nameplates, subject to change and prior sale.

Condition: new, functionality: fully functional, fuel type: hybrid, overall weight: 55,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-75 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrated grizzly feeder, 1070x760 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 150-300 tph Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and the travel track units is highly economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: -Model: FTJ 11-75 -Production Capacity: 150 – 300 tons per hour -Maximum Feeding: 700 mm -Crusher Type: Jaw Crusher -SIZE: 1070x760 mm -Generator: 300 kva -CSS Setting: 45 – 160 mm -Weight: 55000 tons -Dimensions: 2900x3500x14.500mm – Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly advantages. Hjdpozv Tfisfx Acnet FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), functionality: fully functional, Industrial meat slicing machine for boneless meat The EBAKI 1 V horizontal slicer provides consistent cutting of boneless meats. It is particularly suitable for the poultry industry, but can also process pork, beef, turkey, or certain processed meats. This allows for obtaining multiple fillets or slices parallel to each other from a single piece of meat. This technology meets the needs of cutting workshops, meat processing companies, and manufacturers of processed products. Furthermore, horizontal cutting provides a more consistent thickness while improving the presentation of the finished product. Precise horizontal cutting Hsdpfx Acjzv N Rzenot The product moves between a lower conveyor belt and an upper conveyor belt. These two conveyors hold the meat in place as it passes through the cutting area. Then, the blades perform an alternating movement in opposite directions. This ensures that the product remains stable and the resulting fillets are consistent and parallel. This system also minimizes material loss during cutting. Consequently, it helps to better utilize the meat and standardize portions. Diverse applications The EBAKI range can perform horizontal slicing of chicken breasts, turkey, beef, pork, sausages, or bacon. The manufacturer also offers applications for cordon bleu, cooked chicken breasts, and certain extra-thin cuts. Thanks to this versatility, the machine can be integrated into various production lines. It can be used after the preparation or trimming of the meat. Then, the fillets can be transferred to a marinating, cooking, coating, packaging, or freezing line. Cleaning and production integration The EBAKI design provides easy access to the cutting elements and conveyors. In this range, guides and belts can be disassembled without tools to simplify cleaning and maintenance. The EBAKI horizontal slicer is therefore a suitable solution for companies seeking consistent cutting, better utilization of raw materials, and more homogeneous production. Technical specifications: Brand: EBAKI Model: 1 V Type: Horizontal slicer for boneless meat Year: 2022 Serial number: 22 234 12 20 Power: 1.5 kW Voltage: 400 V Power supply: 3 phases + neutral + ground Frequency: 50–60 Hz Current: 5 A Weight: 460 kg L4MFJ3V6