Used Diode Packages for sale (11,518)

Condition: used, total width: 1,350 mm, total length: 2,120 mm, total height: 1,500 mm, Empty weight: 2.000 kg - Documentation available: No - CE certificate present: No - Serial number: 25 - Control: Conventional - Motor power: 3.0kW - Center distance: 750mm - Model: inderslijper extern - Travel X: 750mm - Center height: 150mm - Grinding diameter: 300mm - Table length: 850mm - Table width: 150mm Fodpfx Abjx Ebl No Togk - Transport dimensions: 2120mm x 1350mm x 1500mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. • Generator system shall be produced according to manufacture standards and it shall incorporate Fgjdpfsx D A R Dsx Ab Tek an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.

Condition: good (used), Loma IQ3+ Metal detector Fgodsx Ebinepfx Ab Tok Stainless, belt dimensions 1100mm x 300mm, aperture 500mm x 90mm, 3Ph

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, Control Unit Brand SIEMENS Model 840 D Main Drive Tool taper IMS 76 Number of axis 3 This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information about this machine. Application Types Fsdpfx Abjx D Nd Ds Togk Turning

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details turning diameter 800 mm turning length 1500 mm control Siemens 840 D swing over bed 1000 mm swing diameter over slide rest 800 mm max. workpiece weight between centres 2000 kg main spindle speeds: 2000 U/min main drive 62 kW transmission ratio 4 milling spindle drive 37 kW milling spindle turning speed range: 25 - 10000 U/min total power requirement 82 kVA weight of the machine ca. 28 t dimensions of the machine ca. 8,2 x 5,3 x 3,6 m Additional information UniCen Series – for large complex components With the Monforts machine tools from the UniCen Series 1000 you can work with large, complex components up to 1500 mm diameter and 1000 mm swing diameter entirely, process capably and cost effectively in one set-up. Great flexibility results from the five interpolating axis. The B axis swivelling drill-mill head with a swivel range of 190 deg. directs the tools to the workpiece in almost every position and every angle. Additionally, the tool head can be loaded fully automatically by 60 tools from a separate chain magazine. Thus, even complex freeform surfaces with high surface finish quality are possible. Advantages > Wear free Monforts Hydrostatic > Optimal vibration damping Fgjdpfx Aex D U Hwob Tok > Long-term accuracy > Long life and highest machining performance > Complex five axis machining via the B axis swivelling drill-mill head > Turning, drilling, milling and thread-cutting on one machine > Precision ball-screw with preloaded double nut Extensive partial overhaul since November 2023: - All ball screws including bearings overhauled: X1/X2/Y1/Z1/Z2 - All cylinders overhauled - All Siemens motors overhauled: main spindle, tailstock, magazine, tool 1+2, X/Z/Y/B/C/U/W - Siemens control panel replaced, control module and LT module repaired - Clamping elements/ATC renewed: Ortlieb collet, clamping package incl. pull rod - Tailstock quill renewed - All wipers replaced and covers reworked - Drive belts and safety windows renewed - Various cables renewed * CNC Control SIEMENS 840 D * Swivelling milling head at the top (B axis), interpolating, HSK-A 63 * Y axis * C axis * 8-station turret at the bottom, for driven tools * 60-station tool changer * NC-controlled tailstock, quill diameter 150 mm, max. quill stroke 180 mm * Hydrostatic longitudinal guide in the Z-axis * Coolant system with paper belt filter * Chip conveyor * Oil-cooler, make SCHIMPKE * Extraction system * Power chuck, make FORKARDT, diameter 500 mm

Condition: used, Year of construction: 2003, Horizon VAC-100a VAC-100m SPF-20A FC-20A Booklet Making System, Used This Horizon booklet making system is a powerful solution for professional booklet production, combining collating, stitching, folding, and front trimming in an efficient process. It offers high productivity, versatile applications, and easy operation for efficient booklet production. Key Features: - Two collating towers: VAC-100a and VAC-100m with 10 stations each - Versatile stitching options: Saddle, corner, and side stitching possible - Touch & Work: Intuitive operation thanks to user-friendly technology - 9 programmable memory locations for repeat jobs - Precise error control: Prevention of miss-feed, double-feed, and jam problems - Expandable configuration: Possibility to add more VAC-100 towers Technical Specifications: - Paper format: max. 350 x 500 mm; min. 148 x 120 mm - Booklet format: max. 250 x 350 mm; min. 85 x 120 mm - Paper weight: 40-300 g/m² - Processing thickness: 2-22 sheets (80 g/m²) - Trimming thickness: 4-50 sheets (80 g/m²) - Front trim: max. 25 mm - Production speed: max. 3,600 booklets/h Fgjdpfjx D Urgex Ab Tjk - Collating performance: up to 9,900 sets/h - Loading capacity per station: 55 mm - Power supply: 230V; 50/60Hz - Total power consumption: approx. 2.3 kW All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Year of construction: 2023, condition: excellent (used), Mettler Toledo Type: DSC 3 Mettler Toledo DSC 3 STARe System – FRS5+ Sensor – Thermal Analysis + Accessories Year of manufacture: 2023 Fgsdpfsx D Ufysx Ab Tsk Installation/Commissioning date: 06.11.2023 For sale is a high-quality Mettler Toledo DSC 3 STARe System, one of the leading laboratory instruments for Differential Scanning Calorimetry (DSC). Ideal for research, development, material testing, and quality assurance. The device comes from a controlled laboratory environment and is in excellent optical and technical condition. Device Functions: With the DSC 3, the following thermal properties can be analyzed, among others: - Melting point / glass transition - Crystallinity & phase transitions - Heat capacity (Cp) - Reaction kinetics (curing, cross-linking, decomposition) - Purity determination - Oxidation induction time (OIT) Thanks to the FRS5+ sensor, the device offers maximum sensitivity and stability. Technical Specifications: - Model: DSC 3 STARe System - Sensor: FRS5+ - Temperature range: up to 500 °C - Furnace power: 200 W - Gas controller: GC 005 - Cooling: fan / air cooling - Software version: 3.20 / 1.3.13 - Power supply: 100–240 V AC, 50/60 Hz - Weight: approx. 20–22 kg Important note: "The table shown in the photos is not part of the sale." Condition: used Included in delivery: (see pictures) - Mettler Toledo DSC 3 main unit - Touchscreen control unit - FRS5+ sensor - Gas controller GC 005 - Sample punch (Mettler) - Brooks Sho-Rate flowmeter - Comprehensive documentation & training materials - Multiple folders (STARe System, E-DOC, EDU packages) - Accessories as shown in the images (Specifications and data are subject to change and correction!) For further questions, we are happy to assist you by phone.

Condition: used, Field of application: Mining Introducing the formidable mobile crushing and screening plant on wheels by Polygonmach, a blend of power, innovation, and versatility. Designed to withstand challenging conditions and deliver exceptional results, this mobile crusher is an exceptional choice for any high-volume crushing and screening application. Our design, built in a two-chassis format, combines optimum functionality and power in a compact yet robust package. The first chassis is equipped with a vibrating feeder, PJC-110 Primary Jaw Crusher, bypass conveyor for soil extraction, feeding conveyor, and wheeled mobile chassis with hydraulic legs. Our Dust Removing System ensures your operation stays clean and efficient, demonstrating our commitment to both productivity and the environment. The second frame is fitted with a METSO HP 300 cone crusher, vibrating screen with 3 or 4 decks, feedback conveyor from vibrating screen to cone crusher, and fold-up type stockpile conveyors. This frame, too, comes with wheeled mobile chassis, ensuring easy transportation and positioning. Boosting a total motor power of 500 kW and an electric generator requirement of 700 kVA, our system provides an impressive production capacity of 250-300 tph, with a maximum feeding size of 1100*850mm The convenience of a 4.5 meters feeding height adds to the seamless operation of this powerful system. Fodox D A Hropfx Ab Tegk Further showcasing our attention to detail, the system comes with a state-of-the-art Automation System featuring PLC and a remote controller for easy and efficient operation. With the additional optional diesel electric generator set, this plant is fully prepared to meet all your operational needs. Technology: jaw Mobility: mobile Other characteristics: primary, compact Capacity: Max.: 300 t/h(184 lb/s)Min.: 250 t/h(153 lb/s) Motor power: 500 kW(679.81 hp) Opening height: 1,100 mm(43.3 in) Opening lenght: 850 mm(33.5 in)

Condition: used, functionality: fully functional, mileage: 343,303 km, power: 331 kW (450.03 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,253 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cruise control with active prediction Cab: CR Battery, 210 Ah, rear Fedpfjx Dz H Rjx Ab Tjgk Diesel engine DC13 164 450 hp Euro 6 /Japan Emission 2016 Gearbox GRS905R Advanced Emergency Braking AEB, Auxiliary brakes, Retarder type R4100D, Exhaust brake control Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm Night heater WTA cab heater 3kW Storage rear lower, driver side refrigerator Technical specifications smart ADR Continental Tyres for front axle, 315/70 Tyres for rear axle, 315/70 Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only Main wheelbase, 3750 mm Axle ratio, i = 2.53 Fuel tank capacity 825 l, left Fuel tank capacity 395 l, right AdBlue tank capacity 105 l, right Road speed limiter, adjustable, limiter (engine speed regulation) Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED, automatic Daytime running light function LED and position lamps Fog lamp front type LED 3 diodes Cornering light Roof air deflector adjustable Door window air deflector

Year of construction: 2015, operating hours: 48,086 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D Main Drive Number of spindles 2 Tool taper IMS 76 Number of axis 3 Tail Stock Pinol tool taper VID 30 Tools Number of station 2x16 Fgodpex D Ndwjfx Ab Tjk This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2015. It features a Siemens 840 D control, a main spindle and counter spindle, and a bar machine package for efficient operations. Ideal for complex turning and milling tasks, it includes a hinge type conveyor and a coolant system with multiple pressure settings. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) Fgjdsx D U Alspfx Ab Tjk 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws

Condition: good (used), resistor, wire potentiometer, resistor -Types see pictures -Price: complete Fgjdpsb A Svvjfx Ab Tok -Packages: 4 -Bags: 25 -Weight: 8.5 kg

Condition: used, total length: 1,500 mm, total width: 750 mm, total height: 1,350 mm, Empty weight: 700 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 150 - Swing over bed [mm]: 300 - Carriage turning diameter [mm]: 160 - Distance between centres [mm]: 500 - Bed width [mm]: 210 - Spindle bore [mm]: 36 - Min. spindle speed [rpm]: 15 - Max. spindle speed [rpm]: 3550 - Transport dimensions: 1500mm x 750mm x 1350mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Fsdpfox D Tlrsx Ab Tegk VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2017, General Data Fodpfx Aox D Nxusb Tsgk Machine weight 8300 kg Additional Equipment RDS arm control software Portable laptop configured for operation This ROMER Absolute Arm 7730 was manufactured in 2017. It features a 3.0 m measurement range, volumetric accuracy of ±0.040 mm, and weighs 8.3 kg. Designed for ease of use with a Zero-G counterbalance, carbon fiber tubes, and continuous rotation of the main axis. Includes a mobility package with batteries and Wi-Fi, and a magnetic base for versatile mounting. If you are looking to get high-quality measuring capabilities consider the ROMER Absolute Arm 7730 machine we have for sale. Contact us for more information. Application Types Measuring

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details Fgjdpfx Aox D Tyceb Tek grinding length 2000 mm grinding width 850 mm distance spindle center to table 900 mm control Siemens 840 D total power requirement 155 kVA weight of the machine ca. 15 t dimensions of the machine ca. 8815 x 4185 x 2963 mm Additional information CNC Precision Surface and Profile Grinding Machine Technical Specifications: Grinding length 2000 mm Grinding width 850 mm Travel, transverse 750 mm Distance from table to spindle center 900 mm (or 800 mm with intermediate plate) Magnetic plate size 2000 x 700 mm Table load without magnet 3500 kg Table speed 60 m/min. Spindle drive 26 kW Grinding wheel dimensions 500 x 150 x 203.2 mm Grinding wheel peripheral speed 35 m/s Equipment: 3-axis contouring control Siemens 840 D Grinding programs: Full-cut grinding Face grinding Plunge grinding Path grinding X/Y-axis and Y-Z-axis Profile grinding Automatic program sequence with roughing, finishing, fine finishing and spark-out grinding. Multiple plunge grinding for economical production Surface grinding with continuous, continuously programmable cross feed Grinding wheel calibration Plunge/step grinding Face grinding Dressing in the grinding cycle with lift-off amount Fully automatic compensation of dressing amounts Tool management AC servo drives with ball screw and absolute measuring system in the X, Y, and Z axes Preloaded precision roller guides in the X, Y, and Z axes with linear guides Portable electronic handwheel Automatic belt filter system Coolant heating Electro-permanent magnetic chuck Fully enclosed Direct measuring system in the vertical axis Temperature-controlled machine bed for consistent accuracy Linear motor in the X-axis, table speed max. 60 m/min. Swiveling control panel Continuous speed control of the grinding spindle Electrical linear measuring device for cross-travel adjustment with zero point setting in any position, resolution 0.001 mm Electro-mechanical locking via position control of the headstock in the cross direction for profile and plunge grinding Mechanical extraction of coolant mist TAG table dresser Pre-profiling dresser VPG 190 Diamond grinding wheel, 190 mm diameter Software program for pre-profiling dresser VPG Rough profiling (roughing) CNC table profile dresser TAD 190 Profile depth max. 45 mm Contour accuracy +/- 0.0025 mm Swivel angle +/- 65 degrees Max. dressing speed 210 mm/min. Diamond wheel for table dressing machine TAD 190 Regrinding package for diamond wheel Intermediate plate for raising the magnet WinWop profiling software Import of CAD profile data SP 60 JOB Listing expansion package Additional holes for the magnet clamping plate to facilitate removal of workpieces using compressed air Ghost shift circuit for shutting down the machine after the end of the program

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting Fgjdpfjb A N Uqox Ab Tek -inch thread: 1/2"- 2" inch -Packaged: in contact -Weight: 15 kg

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,316 h, General Data Measurements width 2665 mm Measurements depth 3065 mm Measurements height 2840 mm Machine weight 5600 kg Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 20 – 12000 Number of axis 3 Movement X-Axis Movement 550 mm Y-Axis Movement 550 mm Z-Axis Movement 510 mm Table Table load 600 kg Tools Max weight 8 kg Max tool diameter 80 mm Max tool length 300 mm Type of tool holder SK40 Media Power consumption 20 kVA Additional Equipment Job Shop package Renishaw PP40 wireless workpiece probe TS27R tool measurement probe Scraper-type chip conveyor Coolant tank capacity: 200 L (left side) Coolant pump: 20 bar internal through-spindle coolant Machine enclosure roof LED work area lighting This 3-axis DMG MORI M1 PRO was manufactured in 2022. It features a robust inline spindle with a speed range of 20-12000 rpm and a 24-position automatic tool changer. The worktable supports up to 600 kg with dimensions of 850 × 650 mm. Additional highlights include a Renishaw PP40 probe, 20 bar coolant system, and LED lighting. Ideal for precision machining tasks. Contact us for more information about this machine. Fgedjx D Nigopfx Ab Tek Application Types Milling

Condition: good (used), functionality: fully functional, Technical details tool taper VDI 40 DIN 69880 number 22 Stück Additional information A range of tool holders in good condition. Fsdox D Tk Uopfx Ab Togk Tool holder size: VDI 40, DIN 69880 Were used on a Gildemeister CTX 500 E CNC lathe. Quantity: 1 driven tool holder, angled design. 18 driven tool holders, straight design. 3 standard tool holders. Only sold in a package!

Condition: ready for operation (used), Year of construction: 2019, operating hours: 40 h, Control Unit Brand SIEMENS Model Sinumerik 828D Fedpfxex D Havj Ab Tegk Main Drive Spindle speed range 10–5000 Number of axis 3 Movement X-Axis Movement 450 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Tools Type of tool holder SK40 This 3-axis EMCO Emcomat FB-450 MC was manufactured in 2019. It features a travel range of X450/Y350/Z400 mm, a fixed angle table of 800x400 mm, and a table load capacity of 450 kg. The spindle speed reaches up to 5000 rpm, complemented by a rapid traverse of 5000 mm/min. Includes a Sinumerik 828D interface with multi-touch display and a comprehensive 3-axis control package. If you are looking to get high-quality milling capabilities consider the EMCO Emcomat FB-450 MC machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2011, operating hours: 18,595 h, condition: ready for operation (used), General Data Measurements width 4600 Measurements depth 9950 Measurements height 2400 Machine weight 12000 Control Unit Brand SIEMENS Fgodpox D Sgzsfx Ab Tjk Model Sinumerik 840 D Main Drive Spindle speed range 300 Workpiece Workpiece X 3000 mm Workpiece Y 1500 mm Workpiece Z 115 mm Max Material Thickness Steel 20 mm Stainless steel 15 mm Aluminium 15 mm Additional Equipment Closed machine frame with an integrated laser unit Torque drive combined with direct linear drives Enclosed beam delivery via fiber optic cable Water-air chiller for machine cooling Integrated electrical cabinets with internal lighting Automatic pallet changer (lengthwise installation) Power supply through TruDisk integrated into the machine Working area lighting Wide longitudinal conveyor Positioning laser diode This TRUMPF Trulaser 5030 Fiber was manufactured in 2011. A robust fiber laser cutting machine, it features a 3000 Watt laser output and a working area of 3000 x 1500 x 115 mm. Capable of cutting up to 20 mm steel, 15 mm stainless steel, and 15 mm aluminum, it operates with a Siemens Sinumerik 840 D control system. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 Fiber machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2020, Main Drive Spindle speed range 15000 RPM Movement X-Axis Movement 1016 mm Y-Axis Movement 635 mm Z-Axis Movement 635 mm Fsdpfox D Smuox Ab Tsgk Table Min distance between vertical spindle and table 102 mm Max distance between vertical spindle and table 737 mm Additional Equipment Chip Conveyor with Belt Drive Export Packaging 8-Station Pallet Pool for UMC UMC Spare Tool Storage (1 unit) Through-Tool Air Blast (TAB) Auxiliary Coolant Filter Chip Tray Filter Kit This 5-axis HAAS UMC-1000SS was manufactured in 2020. It features a large working envelope with X, Y, and Z axes measuring 1016 mm, 635 mm, and 635 mm respectively. Ideal for complex geometries and multi-sided machining. Consider the opportunity to buy this HAAS UMC-1000SS universal machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2022, General Data Measurements width 3740 mm Measurements depth 1475 mm Measurements height 11920 mm Machine weight 3300 kg Control Unit Brand ARBURG Model SELOGICA ND Injection Unit Screw diameter 35 mm Shot weight 132 g (PS) Stroke volume 144 cm3 Injection pressure 2000 bar Screw speed 54 m/min Heating capacity 6.4 Clamping Unit Fedpsx D Sr Dsfx Ab Togk Clamping force 600 kN Opening stroke 400 mm Max open daylight 600 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max - Size of mold platens 510 x 510 mm Ejector stroke 125 mm Ejector force for / back 30 kN Media Main electronic connection 23 kW Pump drive power 15 kW Oil tank 135 l This Arburg 370 S 600-290 U Injection moulding machine was manufactured in the year 2022 in Germany. It is new, never used and still in original packaging. With a clamping force of 600 kN, 290 injection unit and screw diameter of 35mm (armored, highly wear-resistant screw) it is a compact, fully hydraulic clamping system - ideal for reliable and precise reproducibility in injection moulding operations. The closing unit can be tilted from horizontal to vertical. To be considered that machine comes without position control. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2017, Main Drive Fgedex D Dkfepfx Ab Tjk Number of axis 5 Control Unit Brand HEIDENHAIN Model TNC 640 This 5-axis DMG MORI DMU 75 monoblock was manufactured in 2017. It features a Heidenhain TNC 640 3D control, a production package with a 40 bar/23 l/min, 600 l tank, and a Blum laser for in-workspace tool measurement. Ideal for complex machining tasks, this vertical machining center represents a significant asset for precision engineering. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand MAZATROL Movement X-Axis Movement 615 mm Y-Axis Movement 260 mm Z-Axis Movement 1585 mm W-Axis Movement 1574 Additional Equipment Fodex D Emujpfx Ab Tjgk Overload detection system / M-coolant (equipped) prep M-thru 7MPa / Mazak Monitoring System B (RMP600) / Mazacheck / C-axis through milling head during rotation / M-code to be switched coolant/air thru / Ethernet operation function / B) Cylindrical & Polar Coordinate (EIA) / 5-Axis Machining Package for SmoothX / Signal Tower (3 colors lights, square) / 2nd Spdl C-Ax. Sync (fact. install only) / Raw/tube connection parts til 1 & 2nd spindle / Mayfran, Consep2000 side / Mayfran, Variflow HP Pack #1 (7 variable flow/pressure stages), 7.5 K/ Mayfran, HP Twin in-line cartridge filter upgrade / Mayfran, coolant gun This 5-axis Mazak Integrex i-400S was manufactured in 2017, featuring a 1500 mm bed, 72 Capto-tool magazine, and a Mazak Monitoring System B. It includes a 5-axis machining package for SmoothX and Ethernet operation functionality. If you are looking to get high-quality turn-mill capabilities, consider the Mazak Integrex i-400S machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2014, Control Unit Brand SIEMENS Model 840D Main Drive Number of axis 5 This 5-axis Mazak VTC 800/30SR was manufactured in 2014, featuring a robust 155-tool ATC, 15 bar through-spindle coolant, and a KUKA robot for enhanced automation. It includes a technology package for 5-axis milling and a robot interface, making it ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information about this machine. Fsdpfxex D I A Ee Ab Tsgk Application Types Milling