Used Diode for sale (110)

Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller Here we offer a Lascon laser system with Lascon controller LPC03. Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +-10% Laser power: 550 W Supply voltage 100-264V +- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 offers the performance of a complete PC in a very small space. Instead of a hard drive, a replaceable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is ideally suited for tasks in the field of measuring, controlling and regulating in an industrial environment. Fodpjzdqkrefx Ak Uopl The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also offers space for the PCI card PCI-1P. In conjunction with the LASCON measuring and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180mm Drives: none Storage medium: replaceable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212mm x 80mm x 250mm (Height x Width x Depth) Protection class: Front: IP40 Environment: 15°C - 40°C Type: LPC03 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 74 h, laser power: 3,300 W, laser wavelength: 1,030 nm, power: 12 kW (16.32 HP), input voltage: 400 V, type of input current: three-phase, total length: 770 mm, total width: 1,400 mm, total height: 1,770 mm, Laser unit with low working hours. It was as a backup unit. Fpsdpotwb Tfjfx Ak Uol

Condition: good (used), Year of construction: 2005, operating hours: 63,102 h, machine/vehicle number: A0230A1162, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 28,387 h, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, TRUMPF Trumatic L3050 Laser Cutting Machine Year of manufacture: 2005 Control system: Sinumerik 840D Fpjdpfxex Ap A Ro Ak Uol Laser type: TLF 6000 Laser power: 6000 W Working area X: 3000 mm Working area Y: 1500 mm Working area Z: 115 mm Max. speed X: 60 m/min Max. speed Y: 60 m/min Laser on hours: 63,102 h, Beam on hours: 28,387 h Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 15 mm Equipment: HI-LAS high-pressure cutting Cutting head with 5" lens Cutting head with 7.5" lens Quick-change cutting heads Sheet position detection system Laser positioning diode Programmable selection of cutting gases with stepless pressure adjustment Micro welds PMS plasma monitoring system Sprint-Las Head distance regulation (DIAS III) ContourLas AutoLas Plus Oil spray system Hydraulic pallet changer Work area lighting Longitudinal conveyor Sectional extraction system Filtration system Automatic shut-off Light barriers Tele-service RJ 45 3.5'' floppy disk drive User manual Used machine in good condition, inspected by qualified personnel. Machine available in March 2026.

Condition: good (used), Year of construction: 2013, 4 piece diode laser system, Limo Diocut 1300 - second-hand - : Price per piece ex location: 1.950.-€ (net)! Manufacturer: LIMO (Lissotschenko Mikrooptik) Type: Diocut 1300 Year of manufacture: 2013 400V, AC +/- 10% 50/60 Hz I < 16A, 3 phase, + N + PE Condition: good, Fpedpfoumi Stjx Ak Usl Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: good (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, laser power: 8,000 W, CNC laser cutting system TruLaser 5030 Fiber (L68) 8000 Watt with LiftMaster X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 8000 Watt Standard equipment: Machine - Enclosed machine frame - Power supply for TruDisk integrated into the machine - Torque drive in combination with linear direct drives - Enclosed beam guidance via laser light cable (LLC) - Machine cooling unit (water-air) - Integrated control cabinets - Integrated cabinet - Automatic pallet changer in longitudinal direction - Longitudinal conveyor - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine Fedszv Trvepfx Ak Uspl - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF laser - Solid-state laser TruDisk 4001 with one LLC outlet - LLC according to standard layout (cable directly next to the machine) - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005). Cutting head - Universal cutting unit with fully adaptive lens system - Single cutting head strategy - Protective glass against lens contamination - Online condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - Microweld - AdjustLine - Multi-sheet processing - Condition Guide - Extended machine sensor system for Condition Guide - 19" touch color screen Data transfer - USB interface - RJ-45 network connection - Central Link - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust extraction system - Machine cladding, certified viewing window, door on the right - Electric roll-up roof + Solid-state laser TruDisk 8001 with 1 LLC outlet - BrightLine fiber - High-speed cutting package - Smart Beam Control (intelligent beam monitoring) - Performance package for fusion cutting + Smart Nozzle Automation - Nozzle changer - Automatic nozzle inspection + High-speed cutting package Eco + Integrated camera 1 for process monitoring (view of the first 2.5m) + CoolLine + Copper cutting package (includes cutting data) + Brass cutting package (includes cutting data) Automation + Basic LiftMaster unit - incl. stainless steel grid (tine spacing 67mm, interchangeable tines), suction frame, stripping device, double sheet detection, symmetrical arrangement) + Loading station - for stack height up to 200mm + Separation of thin sheet metal - Available for sheet thicknesses s = 0.8-2.0mm + Unloading platform + Loading platform + Right-hand arrangement

Condition: repair required (used), functionality: not functional, Year of construction: 2007, operating hours: 134,409 h, machine/vehicle number: A0270A0124, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: Siemens, laser hours: 51,652 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, year of last overhaul: 2023, Equipment: documentation/manual, TRUMPF TRULASER 5060 CO₂ Laser Cutting Machine – 6000 W TRUMPF TRULASER 5060 – 6000W CO₂ Laser – Year 2007 – To be recommissioned Brand: TRUMPF Model: TRULASER 5060 (CO₂ Laser) Laser power: 6000 W CNC control: Siemens Serial number: A0270A0124 Year of manufacture: 2007 Technical specifications • Beam operating hours / cutting time: 134,409 h • Laser operating hours under power: 51,652 h • Maximum steel thickness: 25 mm • Dimensions: 10,300 x 3,820 x 2,550 mm • Weight: 16,500 kg Standard equipment: - TruFlow 6000 W resonator - HI-LAS high-pressure cutting Fjdpfeztb Elex Ak Uopl - Cutting heads with 7.5’ and 10’ lenses - Quick-change cutting head device - Automatic sheet edge detection - Capacitive profile follower and APC process control - Positioning laser diode - Programmable cutting gas pressure - Programmable power cycle - Oil vaporization device - PCS (Process Control System) - Plasma line and LLS (laser power control) - Sprint Line - Contourline - Modem and remote diagnostics - Focus Line - Laser logbook - Automatic pallet changer - Work area lighting - Automatic nozzle cleaning - Conveyor for small parts and scrap - Multiple suction box - Suction device and dust collector - Automatic stop - TFT color screen - 3.5’ floppy disk drive - TruTops laser lite - RJ 45 network card - Safety device Including: air cutting, 3.5’ laser head with high speed, Load Master preparation, additional post-processor Machine condition The machine was in operation until 2023. The laser source and optical path maintenance have been regularly performed by TRUMPF. Technical inspections and preventive maintenance operations have also been carried out annually by the manufacturer. The machine is currently shut down and requires repairs before recommissioning, including pipe replacement. A detailed quote for the repairs and parts to be replaced has been prepared by TRUMPF and can be provided to serious buyers. The overall condition of the equipment requires, at a minimum, the acquisition of the spare parts mentioned in the manufacturer’s offer in order to restore satisfactory production conditions. Sales conditions • Immediate availability • Sold as is • Disassembly, loading, and transport are the responsibility of the buyer • Documentation and repair quote available upon request This machine represents an excellent opportunity for a company with the necessary technical skills to restore it or seeking a machine base for spare parts. For any further information or to arrange a visit, please contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, laser type: fiber laser, Used laser cutting system with 8 kW fiber laser and LiftMaster Compact (Stopa version) Manufacturer: TRUMPF Model: TruLaser 5040 fiber (L69) Year of manufacture: 2015 Operating hours approx.: 67,000 h, Laser on: 40,100 h Fedpfxjy A I Tqj Ak Uopl TECHNICAL DATA: Maximum material thickness: Mild steel O2: 25 mm, Stainless steel N2: 40 mm, Aluminum N2: 25 mm, Copper O2: 10 mm, Copper N2: 5 mm, Brass N2: 10 mm Position deviation: 0.05 mm Max. position scatter Ps max: 0.03 mm Working area: 4,000 x 2,000 mm Laser power: 8,000 watts STANDARD EQUIPMENT Machine: Closed machine frame Torque drive combined with linear direct drives Enclosed beam guidance via fiber optic cable (LLK) Cooling unit Machine cooling unit (water-air) Integrated control cabinets with interior lighting Integrated storage cabinet Automatic longitudinal pallet changer 19" touch color screen Longitudinal conveyor belt TruDisk power supply via the machine Work area illumination Positioning laser diode Spray unit PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device SPECIAL EQUIPMENT: Solid-state laser TruDisk 8001 with 1 fiber output Smart Nozzle Automation (includes nozzle changer, automatic nozzle condition monitoring, and smart skip) BrightLine fiber CoolLine (only with BrightLine fiber) DetectLine: precise sheet position detection (incl. automatic focus measurement) Wide transverse conveyor with tipping container (container to the right of the machine) Cleaning brush Integrated camera (Full HD) for process monitoring and single frame transmission to the network (view of the first 2.5 m) Additional 10 m extension of fiber optic cable between laser and machine Smart Collision Prevention (requires smart-collision-prevention plug-in for TruTops) Machine podium version (without steel structure) Storage interface for STOPA large-scale storage systems (SKL or UL) Safety devices for storage integration incl. 2nd light barrier circuit Storage interface (without storage cart) LiftMaster Compact (STOPA version) TRUMPF Laser: Solid-state laser TruDisk 8001 with one fiber output Fiber optic cable as per standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control (The TruDisk laser is subject to international export controls. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005)) Cutting head: Universal cutting unit with fully adaptive lens system Piercing head strategy Protective glass to prevent lens contamination Protective glass condition check ControlLine: height control and sheet outer edge detection Control system: SINUMERIK 840D SL control Simple workshop programming TruTops Laser via network access Quick re-production Integrated TRUMPF technology data Automatic shut-off Programmable cutting gas/pressure selection ContourLine FastLine FlyLine Microweld AdjustLine Teleservice via Internet Data transfer: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber exhaust system Compact extraction unit Machine enclosure, certified viewing window, door on right Electric roll-up roof This used machine can be inspected under production conditions. All details without guarantee – sale is without any form of warranty or guarantee. Subject to prior sale.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 3,000 h, degree of automation: automatic, laser source manufacturer: TRUMPF, laser hours: 1,860 h, laser power: 3,000 W, TruLaser Tube 5000 fiber Laserpower: 3000W Year of manufacture: 04/2022 Machine on: 3100 h Laser on: 1860 h (!) Machine:  Feed station with self-centering clamping jaws  Tube support (raw material) with automatically retractable tube supports  Feed-through chuck with self-centering tensioning rollers  Adaptive clamping system for the feed-through chuck  Work area illumination  Tube support (finished part) with extendable guide rollers  Finished part deposit (contains one conveyor table and conveyor table extension)  High-precision drives TRUMPF laser  Excitation using pump diodes  Laser power control  Laser log function  Closed beam guidance via laser light cable (LLK) Cutting head Fsdpfszh H Axsx Ak Uopl  Lens cutting head with 150 mm focal length  Magnetic coupling Control  TRUMPF control system based on Sinumerik 840D SL  Integrated technology data  Auto switch on and shutdown  Programmable cutting gas pressure  Remote support interface  Pivoting control panel with 19” touch screen  Condition Guide Functions  AdjustLine  ControlLine  FocusLine  NitroLine  PierceLine Data transmission  USB interface  RJ45 network interface  Central Link  Online Update Manager Accessories  Clamping jaw pair up to D 152 mm  Guide rollers, round/rectangular tubes  Ceramic part (one piece)  Cutting nozzles start-up set Safety  CE marking and EC Machinery Directive  Protective cabin with laser protective screens  Monitoring system for gas pressure, temperature and cooling water  One and two-beam safety light barriers Advanced standard configuration  Machine bed for 6.5 m raw material length  LoadMaster Tube for 6.5 m raw material length (including bundle space)  Part-removal station for 3 m finished part length (including scrap conveyor belt with container)  Compact dust extractor  Laser process cooler (water-air) Bevel cut technology package  Bevel cutting up to maximum 45°  Contains electrically movable feed-through chuck  Application-specific restrictions may arise depending on the respective material properties or the desired machining process Front LoadMaster Tube installation +1,5m unloading (max 4,5m)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, laser power: 6,000 W, CNC laser cutting machine TruLaser 3040 Fiber (L50) 6000 Watt X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 20 mm Sheet metal thickness copper max.: 8 mm Standard equipment Standard features Fodpfozlpb Sox Ak Uopl Machine - Closed machine frame - Integrated cabinet with roller shutter - Torque drive in combination with linear direct drives - Closed beam guidance via laser light cable (LLC) - Cooling unit - Integrated control cabinets with internal lighting - Automatic sheet metal changer in longitudinal direction - 19" touch color screen - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk 3001 with one LLC output - Excitation via pump diodes - Laser power control Cutting head - Universal cutting head - Single cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet metal edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - TruTops Laser via network access - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - FastLine - FlyLine - AdjustLine - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust collection system - Machine enclosure, certified viewing window, door on the right - Sliding roof - Nozzle changer - CoolLine

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting system TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Standard equipment: Machine - Closed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head Fpedszv Sa Eopfx Ak Usl - Universal cutting unit - Single-cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction of parts - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine cladding with certified viewing window door right - Sliding roof + Nozzle changer

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 63,000 h, laser type: fiber laser, laser hours: 48,000 h, laser power: 3,000 W, Equipment: CE marking, documentation/manual, Model: TruLaser 5030 fiber (L41) Year of manufacture: 2013 A new cutting head was installed in 6/2026! Machine hours: 63,000 machine hours, 48,000 laser hours Working area: 3000 x 1500 mm Standard equipment Machine • Enclosed machine frame • Torque drive in combination with linear direct drives • Enclosed beam guidance via fiber optic cable • Machine cooling unit (water-air) • Integrated control cabinets with interior lighting • Automatic pallet changer in the longitudinal direction • Wide longitudinal conveyor belt • Power supply for TruDisk via the machine • Work area lighting • Positioning laser diode • Spray device • PierceLine • FocusLine • NitroLine • PlasmaLine • Automatic nozzle cleaning TRUMPF Laser • Solid-state laser TruDisk 3001 with one fiber optic cable outlet • Fiber optic cable according to standard layout • Laser cooling unit (water-air) • Excitation via pump diodes • Laser power control • Laser logbook function Cutting head • Universal cutting head with fully adaptive lens system • Protective glass against lens contamination • Condition monitoring of the protective glass • ControlLine: Height control and sheet edge detection Control system • Control system SINUMERIK 840D SL • 17" touch color screen • Simple workshop programming • Advanced workshop programming • Fast reproduction • Integrated technology data • Automatic shutdown • FastLine • AdjustLine • Teleservice via internet data transmission • USB interface • RJ-45 network connection Safety • CE marking • Light curtains • Multi-chamber extraction system • Integrated compact dust extraction system Fpedpfx Aezrxdvek Uol • Fire alarm system in the compact dust extractor • Machine enclosure, certified viewing window, door on the right • Electric roll-up roof

Condition: refurbished (used), functionality: fully functional, This excellently maintained Agilent 1200 HPLC system is ready for immediate use and provides a reliable solution for both routine and advanced chromatographic analyses. Annual preventive maintenance has been performed by certified Agilent Service Engineers. The final maintenance and qualification were performed in July 2026, during which the system successfully passed the inspection (PASS). Configuration: Agilent 1200 Solvent Tray Agilent 1200 Vacuum Degasser G1322A Agilent 1200 Quaternary Pump G1311A Agilent 1200 Series Standard Autosampler G1329A Agilent 1200 Thermostatted Column Compartment G1316A with integrated switching valve Agilent 1200 Series Diode Array Detector (DAD) G1315B PC with Windows 10 Agilent ChemStation CDS software included 6-month warranty Enjoy 25% off your first service when you sign up for a maintenance contract with us. Fpjdpfezy Hldex Ak Usl

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (beveling unit) Manufacturer: Zinser Type: 2425-I/3600 Fpedsw Rpvbjpfx Ak Uol Year of manufacture: 2017 CNC control: 5010 Travel length: 11 m Oxy-fuel cutting table with oscillating conveyor system, including dust extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source Automatic gas console Includes automatically rotating plasma beveling unit Bevel System 2015/350 Downflow 3DFP9-SP filter system Power: 9 kW Laser diode 9926ä

Condition: excellent (used), Year of construction: 2008, For sale is a used TruLaser 3530 laser cutting machine. Technical data: - Operating hours: Beam-on 2955 h / Laser-on 15464 h - X-axis travel: 3000 mm (max. 3104) - Y-axis travel: 1500 mm (max. 1580) - Xp-axis travel: 300 mm (max. 305 mm) - Z-axis travel: 114 mm - Max. material thickness: 20 mm - Maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - Max. positioning speed, axis-parallel: 120 m/min - Simultaneous: 170 mm/min - Acceleration during positioning, X-axis: 9 m/second - Xp + Y-axis: 15 m/second - Cutting, X-axis: 4 m/second - Cutting, Xp and Y-axis: 15 m/second Standard equipment: - Enclosed machine frame with integrated laser resonator - Motion unit for optimal processing speeds - Additional high-dynamic Xp axis - Automatic pallet changer - Enclosed beam guidance - NitroLine, high-pressure cutting - FocusLine, constant focal position - Compressed air cutting - PierceLine, reduction of the piercing process - PlasmaLine, plasma sensor technology - SprintLine, fast processing - LensLine Fpsdpfx Akeixl Tno Ujl - FlyLine - ContourLine, for producing small holes - Microweld - Spray device - Positioning laser diode - Programmable cutting gas pressure - Automatic shutdown - Work area lighting - TruTops Laser lite - CO2 laser TruFlow 3200 with high-frequency excitation, mirror telescope and maintenance-free turbo-radial blower - Laser control TASC 3, logbook function and cooling unit - Laser cutting head with 5 and 7.5 lenses and quick-change device - ControlLine, capacitive height control and process control - Control system Sinumerik 840D: Open control - Causes of error messages via diagnostic functions Extended machine equipment: - Pallet changing system - Laser cutting heads 5" and 7.5" - Additional laser cutting head with 3.75" lens for high-speed cutting - Dimensions in mm: approx. 9300 x 4600 x 2000, weight in kg: approx. 11500 Year of manufacture: 2008 Special price: €45,000 net Machine has been disassembled. Can be viewed after prior arrangement. If interested, please contact us.

Year of construction: 2020, condition: excellent (used), WM1 300 CNC incl. Renishaw TP 200 Year of manufacture: 2020 Clamping tools from DK Fixiersysteme 3-axis CNC control High-resolution CCD matrix camera 1.5x magnification Incident lighting via LED ring light; 4 sectors and 1 ring individually switchable Precision measuring stage (X and Y axes) Diode laser for positioning assistance Joystick and trackball for axis movement with fast/slow toggle Camera-based measurement data acquisition Precise edge detection in transmitted and incident light using intelligent image processing algorithms Compact and handy – high performance Rapid operation with maximum measurement precision Special features Incl. Renishaw TP 200 touch probe system Switchable LED surface illumination Diode laser for positioning assistance With a measuring range of 300 mm × 200 mm × 200 mm, it excels particularly with stamped parts, plastic and rubber components, milled parts, tools, profiles, and PCBs. Key highlights of the measuring microscope include camera-based measurement data acquisition, rapid operation, and high precision. Another notable feature is the precise edge detection in transmitted and incident light using smart image processing algorithms. Despite its high performance, the WM 1 300 CNC is compact and handy, measuring 900 mm × 950 mm × 950 mm. Fodpfx Akjzpwd Ns Uopl Please feel free to contact us if you have any further questions!

Year of construction: 2007, condition: used, Technax welding machine HWS2202 from relay production / welding system for contacts Fedpfju Eqtqsx Ak Uspl semi-automatic stranded wire to contact incl operating instructions inside lined with black plastic plates without cooling unit Generator Harms-Wende HW2000 welding transformer: HWT 2108-6,3 (power rating at 20% 80kVA; voltage sec. 6,3V; 2 diodes) year 2007

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D, overall weight: 12,000 kg, total height: 2,400 mm, This TRUMPF Trulaser 5030 Fiber was manufactured in 2011. A robust fiber laser cutting machine, it features a 3000 Watt laser output and a working area of 3000 x 1500 x 115 mm. Capable of cutting up to 20 mm steel, 15 mm stainless steel, and 15 mm aluminum, it operates with a Siemens Sinumerik 840 D control system. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 Fiber machine we have for sale. Contact us for more information. Additional equipment • Closed machine frame with an integrated laser unit • Torque drive combined with direct linear drives • Enclosed beam delivery via fiber optic cable • Water-air chiller for machine cooling • Integrated electrical cabinets with internal lighting • Automatic pallet changer (lengthwise installation) • Power supply through TruDisk integrated into the machine • Working area lighting • Wide longitudinal conveyor • Positioning laser diode Machine Benefits Technical Machine Benefits • Positioning accuracy: 0. 05 mm • Laser rated output: 3000 watts Fpjdpfszvv A Dsx Ak Uol Extra Information The LiftMaster is included with the machine. Dimensions Machine Depth 9950 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, laser power: 6,000 W, CNC Laser Cutting System TruLaser 3040 Fiber (L81) 6000 Watt X Working area max.: 4000 mm Y Working area max.: 2000 mm Z Working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Operating hours: 18581 hrs. Laser beam on: 13125 hrs. Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 25 mm Sheet metal thickness copper max.: 10 mm Standard Equipment Machine: Working area: 3000 x 1500 mm Closed machine frame Cooling unit for machine and laser (water-air) Longitudinal conveyor Motion unit for highly precise machining Work area lighting Position laser diode Spray device Automatic nozzle cleaning Gantry drive in combination with linear direct drives Integrated control cabinets Integrated cabinet Closed beam guidance via laser light cable (LLK) Machine status indicator Machine ambient temperature 5 to 35 °C Laser: Excitation via pump diodes Laser power control Cutting head: 1-cutting head strategy Universal cutting head with adaptive lens system Protective glass Online condition monitoring of the protective glass Control system: Fjdpfx Ajzln Udek Uopl Fast reproduction Control system SINUMERIK 840D SL Ergonomic control panel with 21.5″ wide-screen multi-touch color display Integrated technology data Copper cutting package • Cutting data O2 and N2 Brass cutting package • Cutting data N2 Automatic shutdown Programmable cutting gas / pressure selection Microweld Remote support interface Multi-sheet processing (• Not possible in combination with automation) Condition Guide Functions: AdjustLine ControlLine FastLine FlyLine NitroLine PierceLine (• Additionally available from TruDisk 6001: Regulation and monitoring of the piercing process) FocusLine Data transmission: USB interface RJ-45 network interface Central Link Online Update Manager • Automatic download of updates via remote support connection • Installation of the updates when the machine is switched on or by the customer or by TRUMPF service • To use, the Online Update Manager must be activated; deactivation is possible at any time by the customer. Safety: CE marking Light curtains Multi-chamber extraction system Machine enclosure with certified viewing pane, door on the right Extended Standard Equipment: Compact dust collector Sliding roof Automatic pallet changer in the longitudinal direction Support rails made of structural steel External solid-state laser TruDisk 3001 with 1 LLK output Power supply for TruDisk via the machine - External solid-state laser TruDisk 6001 - BrightLine fiber - Nozzle changer - Copper cutting package - Brass cutting package - Mobile Control App - Viewing pane, door on the left - HighSpeed Eco - RCI interface - CoolLine - DetectLine

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser hours: 7,000 h, laser power: 4,000 W, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 750 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 80 m/min, power: 4 kW (5.44 HP), Equipment: CE marking, cooling unit, dust extraction, fume extraction, ONLY 7,000 OPERATING HOURS – LASER UNIT! Special Equipment: - Automatic front-opening sliding door - Cabin lighting - Movable pendant control panel - FastLine Cell - 2D cutting tables with support rails & drawers Standard description: - Machine frame with Y-arm and integrated laser unit - Laser unit: CO2 laser TruFlow4000, high-frequency excited - Maintenance-free turbo radial blower - Mirror telescope - Cooling unit - Positioning laser diode - Laser power control - Logbook function - Drives: maintenance-free three-phase servomotors - Illumination under the Y-arm - Magnetic coupling for processing head - Head detection - AutoLasPlus - Pendant control panel - TFT color monitor - Teach panel - Network connection RJ 45 Fjdsyidpqspfx Ak Ujpl Processing Methods: - Laser cutting - Dynamic cutting head (155mm) - Cutting head (240mm) - PierceLine

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,197 h, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D SL, laser power: 6,000 W, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,525 mm, number of axes: 3, This 3-axis HGTECH Marvel 6000-3015 fiber laser cutting machine was manufactured in 2022. It features a working area of 3000 x 1500 mm. The machine is equipped with a Siemens SINUMERIK 840D SL CNC control and an automatic pallet changer for enhanced productivity. If you are looking to get high-quality cutting capabilities, consider the HGTECH Marvel 6000-3015 machine we have for sale. Contact us for further details. • Working area: 3000 x 1500 mm • Drive system: gantry drive • Transmission: rack and pinion • Control panel: touch color display • Motors and drives: Siemens motors and drive modules • Cutting head: Precitec ProCutter (compact/lightweight, autofocus focusing lens, distance sensor) • Laser source: external solid-state fiber laser Raycus • Laser output: single fiber (one LLK output) • Positioning: laser diode • Sheet detection: outer edge detection • Nozzle cleaning: automatic • Workspace lighting: integrated Fpodpfx Aey Egwaek Ujl • Status indication: machine status light • Waste system: roll-out drawers, right side • Electrical cabinet: with internal lighting • Electrical connection: 380 V, 3‑phase, 50 Hz, 100 A Additional equipment • Cooling system: chiller unit • Pallet system: automatic pallet changer (longitudinal) • Extraction system: multi-chamber extractionNote: Laser power appears twice with different values (4000 W and 6000 W). Please confirm the correct rating.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Fpodpfey Samusx Ak Ujl Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: excellent (used), Here, we offer a laser beam source from Coherent. Designation: AVIA 355-X Operating hours: Diodes 43022/43022, Head 42955 Crystal Shifter: 1845.91 hours Wavelength: 355nm Excitation: diode-pumped Laser type: Nd:YAG laser Laser type 2: THG, Q-Switch Fsdjzdy H Aspfx Ak Uepl Operating mode: pulsed Laser power: 10 W at 60 kHz Beam divergence:

Condition: used, mileage: 722,540 km, power: 368 kW (500.34 HP), first registration: 05/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Vehicle equipment and technical details: General information: * Chassis type: S 500 A4x2EB * VIN code: YS2S4X20005553872 Fpsdoyv Uh Ispfx Ak Usl * Maximum permissible gross vehicle weight: 18 tons ---- Technical data: * Product class: Truck * Wheel configuration: 4x2 * Wheelbase: 3600 mm * Chassis width: 2600 mm * Chassis height: extra low * Front axle load, technical: 7500 kg * Rear axle load, technical: 11500 kg * GVW, legal: 18,000 kg * GVW, technical: 44,000 kg * Maximum permissible gross vehicle weight, technical: 19,000 kg * Emission level: Euro 6 * Engine: DC13 155/500 hp, 368 kW (500 hp), displacement: 13 liters * Transmission: GRS905R, Opticruise, TMS2 * Retarder: Scania R3500 * Front axle tire size: 355/50 R22.5 * Rear axle tire size: 295/60 R22.5 * Rim material: Aluminum * Front axle rim type: 22.5x11.75 Aluminum Alcoa DuraBright * Rear axle rim type: 22.5x9.00 Aluminum Alcoa DuraBright * Braking system: EBS7, electronic, ABS/EBS: 4S/4M * Hill hold: available * Air tank capacity: front 70 dm³, rear 30 dm³ * Suspension system: Air suspension front and rear, extra low air suspension height front * Leveling system: fast, truck and trailer * Steering gear: ZF 8098, ratio: 17-20:1, adjustable steering wheel (tilt + slide) * Speed limiter: 89 km/h (legal 90 km/h) ---- Cab: * Type: CS, length: 20 dm, roof height: high * Color: Ebony Black * Windshield: tinted, with rain sensor * Air conditioning: automatic, with auxiliary heater (WTA cab heater 3 kW) * Sunroof: electric * Cab mounting: Air Comfort * Driver and passenger seat: Premium, leather black, driver's seat with adjustable backrest and seat ventilation * Lower bunk: extendable from 800 to 1,000 mm, mattress: pocket spring * Upper bunk: width 700 mm, with safety net * Bluetooth: available * Navigation: with topographical map data for Europe * Audio system: AUS4 * USB ports: dashboard, passenger side, driver and passenger side, rear wall * Headlights: LED, fog lights: LED (3 diodes), daytime running lights: LED * Rearview mirrors: electrically adjustable and heated, spherical, driver/passenger side * Storage compartments: driver/passenger side, refrigerator box rear lower on driver's side, drawer rear lower passenger side ---- Additional equipment: * Fifth wheel coupling: +GF+ SK-S36.20 2/128, position: -510 mm * Mounting plate: 22 mm, D-value max 152 kN * Rear splash guard: plastic, length 96 mm * Spray suppression device according to EU 109/2011: included * Front mirror: electrically adjustable and heated * Horn: compressed air 118 dBA * Trailer brake coupling: ISO type, 1x15-pin connector ---- Certificates: * Advanced Emergency Braking: E4 - 131R - 010008 EXT.05 * Lane Departure Warning System (LDWS): E4 - 130R - 000010 EXT.04 * Speed Limiter: E4 - 89R - 000069 EXT.13 ---- * Front axle tire dimension: 355/50R22.5 * Rear axle tire dimension: 295/60R22.5 * Fuel tank: 450 + 450 liters * AdBlue tank: 96 liters * Technical total weight: 19000 kg * Tare weight: 8227 kg * Permissible trailer load: 26470 kg * Total length: 5810 mm * Wheelbase: 3600 mm * Next inspection due: 07.2027 * Engine operating hours: 12513 hours ---- Vehicle number: 11934 ---- Errors and prior sale excepted ---- Advertisements and various lettering have been digitally removed. ---- We will gladly assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you, for an additional fee...

Year of construction: 2020, condition: excellent (used), WM1 300 CNC incl. Renishaw TP 200 Year of manufacture: 2020 Clamping tool from DK Fixiersysteme 3-axis CNC control High-resolution CCD matrix camera 1.5x magnification Incident light illumination via LED ring light, 4 sectors and 1 ring individually switchable Precision measuring table in X and Y axes Diode laser for positioning assistance Joystick and trackball for axis movement with fast/slow switching Camera-supported measurement data acquisition Precise edge detection in transmitted and incident light using intelligent image processing algorithms Compact and portable – powerful performance Easy handling with maximum measurement accuracy Special features Including Renishaw TP 200 touch probe system Switchable LED surface illumination Fpjdpfsyuut Tjx Ak Ujl Diode laser for positioning assistance With a measuring range of 300 mm × 200 mm × 200 mm, it excels especially in the measurement of stamped, plastic, rubber and milled parts as well as tools, profiles, and PCBs. Key features of the measuring microscope include camera-assisted data acquisition, quick operation, and its high precision. Of particular note is the precise edge detection in transmitted and reflected light, powered by smart image processing algorithms. Despite its powerful capabilities, the WM 1 300 CNC remains compact and handy with dimensions of 900 mm × 950 mm × 950 mm.

Condition: used, Year of construction: 2005, The SCREEN PTR 4100, manufactured in 2005, is a dependable computer-to-plate system designed for high-quality plate imaging. With a maximum plate size of 830 x 660 mm, it provides consistent and precise output for professional offset printing environments. This unit is equipped with a Heidelberg Autoloader for efficient plate handling, a Xitron RIP with dongle for accurate workflow and imaging control, and a stacker for streamlined plate management. Currently located in Germany and still in operation at a printshop, the SCREEN PTR 4100 combines robust engineering with automation features, making it a reliable solution for printshops seeking accuracy, productivity, and ease of use in plate production. Format: 830 x 660 mm Max. Size: Plate size: Min 324 x 370 Speed: Speed: approx 10 plates/h Equipment: 4-up Thermal PlateSetter - 16 channel infrared laser diodes Resolution: 2400 dpi Autolader Including Xitron Rip with dongle Fsdpfx Akjw U Dt As Uopl Punching device Blower Unit 7846 Hours The diodes are in very good condition, as can be seen in the pictures.