Used Dimter for sale (52)

Condition: like new (used), spare parts + accessories Rex + Kupfermühle + GreCon + Dimter + Cook Bolinders various in stock Kupfermühle Rex Dimter Fjdpfx Ajlifbdob Tegk Grecon Cook Bolinders

Condition: good (used), Year of construction: 2006, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2006 Motor power 7,5kW Input table automatic feeding 4,10m (throughfeed system) Outut table automatic 6 pcs. kickers on right outfeed table Fgodpsxtxi Iefx Ab Tsk Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: good (used), Sorting plant, sorting conveyor belt, sorting behind an optimizing saw. Conveyor belt length: approx. 8,000 mm conveyor belt width: approx. 250 mm Fgjdpfx Absg Ufnxs Tsk working height: without feet Drive: without motor 5 pcs. pneumatic buffers Belt is disassembled, because of transport, cables and hoses have to be made new.

Condition: excellent (used), Year of construction: 2012, Optimazition cross cut machine Salvador super push 200 Fgjdpfxsxp Ig Uj Ab Tek

Condition: used, Year of construction: 1997, Dimter Profi Joint 600 KD Finger Jointing Line The line's throughput was 2.5 boards per minute. Board dimensions: L = 900 mm, H = 180 mm, and W = 600 mm. If the maximum volume of one full board is 0.081 m³ x 2.5 = ~0.2 m³, the material can be loaded into the machine in one minute. However, this directly depends on the size of the loaded raw material. Linear meters: We processed 10,000–12,000 meters in an 8-hour shift. Using raw material 24 mm thick and 98 mm wide. Fgodpfx Asxmvxyob Tek The length of the raw material ranged from 200 to 60 m. dismantled

Condition: excellent (used), Year of construction: 2016, 1 Up-stroke angle cross- cutting saw model UKA 600 with pneumatic stroke and clamping device Saw unit mounted on rotating table of diameter : 980 mm Saw blade diameter : 600 mm Cutting capacity : 165 x 240 mm 90 degrees Maximum cutting height : 165 mm at the Fence and 175 mm Diameter (at 90 degrees) for round material Cutting angles : 30 – 90 – 30 degrees 45 – 90 – 45 degrees with automatic function Motor power : 5.5 Kw Voltage : 400 Volt 50 Hz Working height : 920 mm 1 Tiger Stop 7.5 Automatic Stop and pusher Total length : 7.95 meter Working length : 7.35 meter Net working length (automatic saw) : 6 meter Voltage : 220 Volt 50 Hz Motor power : 0,45 Kw Feed speed : maximum 40 m/min (Depends on load) Précision : +/- 0,4 mm as pusher. Infeed-table for TigerStop 6.8 Total length : 7.4 meters Table width : 325 mm 1 Outfeed / infeed table with side fence Length : 3.7 meter Width : 325 mm Fgsdpfx Aexivhajb Tek Right side pusher version (video for explanation purposes only) The machine is operated by push button for semi-automatic use or fully automatic for 90 degree angles controlled by the TigerStop. The rotation table is controlled by a Tigerstop Servo drive TigerDrive

Condition: repair required (used), Finger Jointing Line Dimter HK 400 Finger jointing system for wood bundles Fgodpfx Abjvi Hw No Tek Wood input lengths: 800–6000 mm Milling height: 285 mm Color: blue Requires repairs, sold as-is The system has already been dismantled and is stored at the Jöma warehouse A lot of material for little money All technical documentation is available We also provide technical assistance

Condition: good (used), Year of construction: 2005, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2005 Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table automatic 6 pcs. kickers on left outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included. Fsdpsxtxg Hsfx Ab Togk

Condition: good (used), Paddle ejector for sorting belt Length: approx. 600 mm Working height: 850 mm Fgedpsqmizdsfx Ab Tok Drive: Rexroth servo more available also other length

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, Dimter OPTICUT 204R OPTICOM ASSIST control – programming in CZ/DE/EN Fgsdpfexgdwdjx Ab Tsk Programming – by classes, quality, marking cut, length cut – full optimization Very simple programming Full documentation – operating manual, parts catalogue, pneumatic and electric schematics Maximum cutting length 4000 mm (extendable up to 6700 mm) Maximum cutting height 100 mm Maximum cutting width 260 mm Saw blade diameter 500 mm Feed speed 180 m/min Number of sorters – 4 (expandable up to 10) Saw lift – pneumatic Cutting accuracy +/- 0.5 mm The machine is powered and available for testing The machine is like new, 100% complete and fully operational! We can arrange transport within the EU.

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). Fgjdpfx Aew Uf Tksb Tsk The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: used, Year of construction: 2007, No. 3177 Fgodeu Atmujpfx Ab Tjk Optimizing cross-cut system Grecon Dimter OptiCut 200-1 Used, year of construction 2007 For cross-cutting fixed lengths Wood dimensions to be processed: Input lengths min./max. 3000 - 5000 mm Input widths min./max. 80 - 200 mm Input thicknesses min./max. 38 - 80 mm Timber cross-sections max. 200 x 50 Final timber length min./max. 700 - 1000 mm Average number of cuts / board 5 Wood types: Softwood or hardwood Performance of the system: Feed speed max. 180 m/min, infinitely variable Time per cross-cutting process incl. brakes 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m coupled with feed motor of the saw Item 2: OptiCut 200-1 automatic cross-cut saw in left-hand design With built-in length measuring wheel and built-in blow-out device for waste Graphics-capable input terminal, 1 / 4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is fed from the left Pos. 3: Outfeed conveyor belt / sorting station with drive unit, without ejector Belt length approx. 1.5 m Machine already dismantled and stored The infeed table was not used by the previous owner. 2 feed rollers were installed for the material feed. The conveyor table is there, only the rubber belt is missing. Sale on behalf of customer, ex location Austria, without transportation and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), functionality: fully functional, Conveyor belt Belt conveyor Dimensions: L 7600 x W 350 x H 900 mm Belt width: 240 mm Rexroth 3-phase permanent magnet motor Fjdpfx Aovn Sk Sob Tjgk cleaned, repaired, and function-tested

Condition: excellent (used), Year of construction: 2010, I sell the set of 3pcs. Grecon Dimter belt conveyor suitable for Industry use, for example wooden industry, material manipulation etc. Total length 2,00m Band width 300mm Fsdpot Rt I Hofx Ab Togk Feeding with electric motor 0,37kW / 0,55HP Fully working. Available immediately.

Year of construction: 2004, condition: excellent (used), Dimter optimization crosscut saw 350 with elevation AH 1400 mm crosscut see picture crosscut saw control cabinet Scanner interface sorting 6500 mm long 3 pushers Waste flap Machine is already dismantled and immediately available Machine ran without problems until dismantling Fedpfxjncc Ics Ab Togk Transport can be organized

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, ### Weinig Dimter OptiCut 350 – Optimizing cross-cut saw The Weinig Dimter OptiCut 350 is a high-performance Optimizing cross-cut saw widely used in the woodworking industry for precise cut-to-size operations with simultaneous material optimization. This machine ensures high-speed, accurate cutting, maximizing raw material efficiency while minimizing waste. Year of manufacture: 2005 Technical condition: Very good --- Technical Specifications: 1. Input material length: - Maximum length: 6,200 mm - Minimum length: 500 mm 2. Material width: - Maximum width: 300 mm - Minimum width: 40 mm 3. Material thickness: - Maximum thickness: 100 mm Fgjdev Dm U Rjpfx Ab Tok - Minimum thickness: 15 mm 4. Cutting speed: - Maximum cutting speed: 250-350 cuts per minute - Feed speed: up to 200 m/min 5. Cutting tool: - Saw blade rotational speed: approx. 3,000 RPM 6. Control system: - CNC control with an advanced PLC system for precise cutting process management. - Optimization data input to maximize material utilization and minimize waste. - Touchscreen interface for easy machine operation and parameter input. 7. Optimization system: - Equipped with a defect recognition system (manual or automatic defect marking) to eliminate defective sections during cutting. - Length optimization function based on production requirements (e.g., minimizing waste, maximizing output of specific lengths). 8. Material feeding system: - Automatic feeding system for seamless material input. - Integrated conveyors and transport systems for efficient material flow through the machine. 9. Waste management: - Automated waste removal and sorting system to separate defective wood fragments. - Number of ejectors: 9 unit 10. Cutting accuracy: - High precision cutting with an accuracy of ± 0.5 mm, depending on wood parameters and machine settings. 11. Power supply: - Standard power supply: 400 V, 50 Hz --- ### Additional Features: - Automatic defect marking: The operator can mark defects on the wood (e.g., knots, cracks), and the machine automatically optimizes the cutting process to avoid these sections. - Safety features: Equipped with modern safety systems, including lock sensors and protective covers. --- Applications: The Weinig Dimter OptiCut 350 is ideal for woodworking industries, especially in facilities producing structural wooden components, furniture parts, and solid wood processing plants. Thanks to its optimization capabilities, this machine significantly increases productivity and efficiency while reducing material waste.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Grecon Ultra microstrip line - German production - year of production 2001 - for soft and hard wood - DTR TECHNICAL PARAMETERS: length of elements min/max 150/1000 mm width of elements min/max 40/205 mm height min/max 20x80 ratio min length / max width 2:1 initial length min/max 3000/6100 mm power of disc engine 5,5 kW blade spindle diameter 30 mm milling cutter motor power 22 kW spindle diameter 50 mm Fsdpfxorf Ty So Ab Tegk total length 11500 mm width 5300 mm total power consumption 39 kW air pressure 8 bar air consumption 660 NL/min nozzle diameter 250 and 100 mm extraction demand 6150 m3/h 30m/s transport dimensions 1300 cm x 220 cm x 200 cm weight 6700 kg

Condition: ready for operation (used), Panel length: 3200mm, panel width: 1000mm, max. workpiece thickness: 38mm, min. infeed length: 500mm. Fgedpfx Abjm Habde Tek

Condition: repair required (used), Year of construction: 1994, functionality: limited functionality, machine/vehicle number: 6305/7, pressing force: 15 t, working height: 905 mm, total length: 1,900 mm, pressing force 15 t line consisting of : Fgodjg T Spajpfx Ab Tek feed rollers with servo drive press 15 t inclusive hydraulic unit feed rollers with servo drive saw >>without electrical equipment

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2301.14, Sawn timber length cross cut line, timber width 20 - 300 mm, height 10 -100 mm Fgedpsw Rr Dbofx Ab Tok

Condition: good (used), reciprocating cross-cut saw For cutting glue laminated beams to length machine length 2200 mm Machine width 1200 mm working height 850 mm Fedpfog E Iqfox Ab Togk without control

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, The Grecon Combipact wood joining line, year of manufacture 2009, is an advanced system used in the woodworking industry, primarily for joining short lengths of wood into longer pieces using finger jointing. Thanks to this process, it is possible to use wood waste to produce full-value structural elements, such as in beams, scantlings and panels. Technical data: 1. initial length of the elements: - Minimum length: 150 mm - Maximum length: 1000 mm 2 Width of elements: - Minimum width: about 20-40 mm. - Maximum width: about 200 mm. 3. thickness of elements: - Minimum thickness: about 15-20 mm. - Maximum thickness: about 80 mm. 4. Final length after jointing: - Standard maximum length after jointing: from 6000 mm. 5 Capacity: - The production capacity is usually 5 to 15 joints per minute, which gives the ability to process up to 3000 mb/hour. Fodouiz I Rjpfx Ab Tsgk 6. joint type: - Finger jointing, which is made with high precision, providing a durable and strong connection. 7. Press pressure: - Typically, a hydraulic press applies a pressure of several to several tons to effectively join the parts. 8 Control: - A PLC control system that provides process automation with the ability to set various parameters for joining wood. 9 Gluing: - Grecon Combipact lines are equipped with automated glue application systems that precisely dispense the correct amount of bonding agent. 10. power supply: - Standard power supply: 400 V, 50 Hz

Condition: used, Milling spindle Fedjqwgrpepfx Ab Tegk Milling spindles for finger joint cutters Finger jointing machine various lengths various models In stock at www.joema-shop.com Manufacturers: GreCon, Sauter, DIMTER

Condition: excellent (used), operating hours: 10 h, functionality: fully functional, Grecon Dimter Ultra automatic wood joining line Machine after major renovation. Specification: Tenner: Sawheadstock: - Spindle speed: 3000 rpm - Saw motor power: 6 kW - Chip extraction: Ø100 mm Milling headstock: - Shank diameter: Ø50 mm - Usable shank length: 210 mm - Max. tool diameter: Ø250 mm-Ø150 mm - Spindle speed: 6000 rpm - Milling motor: 15 kW / 3000 rpm - Chip extraction: Ø150 mm Feed table: - Minimum board length: 150 mm - Maximum board length: 700 mm - Working feed: Steplessly adjustable Fgsdpfxeuddvaj Ab Tok Dust extraction: Chipper exhaust port diameter: Ø100 mm Mill exhaust nozzle diameter: Ø150 mm Dust extraction capacity (flow rate): ~2400 m3/h Pneumatic system: Working pressure: 6 bar Air requirement: ~2.5 m3/h at 6 bar (15 Nm3/h) CONTI M 6/6000 longitudinal wood joining press: Press: - Loaded strip width: 25 – 160 mm - Finished strip length: approx. 6000+15-50 mm - Pressing force: 3 – 7.5 T (3 000 – 7500 daN) Circular saw: - Saw diameter: Ø400 mm - Spindle diameter: Ø30 mm - Motor: 4 kW / 3000 rpm Dust extraction: - Saw exhaust nozzle diameter: Ø100 mm - Dust extraction efficiency (flow rate): ~400 m3/h Pneumatic installation: - Working pressure: 6 bar - Air demand: ~2.5 m3/h at 6 bar (15 Nm3/h) Scope of renovation work: 1. Cleaning the machine bodies and applying new paint 2. Replacing with new bearings on: the main spindle of the tenoner; on the saw headstock of the press; linear bearings on the guide of the tenoner table carriage; bearings on the working belts. 3. Installing a new glue nozzle with a pitch of 3.8 mm on the tenoner body, installing a glue supply tank with a safety valve; 4. New conveyor belts 5. Replacement of wiring on machine bodies 6. Replacement of pneumatic hoses for actuators, solenoid valves and other pneumatic elements in machines with new ones; 7. Replacement of gear wheels and double-row chain on the belt-chain feeder of the press. 8. Regeneration of electromagnetic brakes on the tenoning machine 9. Replacement of seals and O-rings (repair kits) in pneumatic actuators Replacement of worn solenoid valves with new ones. 10. Replacement of graphic panels on the tenoning machine cabinet, on the press cabinet, on the small press panel with new ones. 11. Replacement of buttons, lamps and switches on panels and control boxes with new ones. Replacement of boxes with connectors with new ones. 12. Replacement of controllers supervising the operation of the tenoning machine and press with new ones. Adjustment of the machine control program to the user's needs 13. Installation of a new inverter on the press rollers and on the pusher of the receiving table projector; 14. Maintenance of electrical installations in control cabinets, modernization and preparation of electrical diagrams. 15. Installation of covers, grids and necessary descriptions, stickers and health and safety signs as well as manufacturer's logos and nameplates. 16. Replacement of V-belts with new ones, checking pulleys; gear motors and engines; 17. Replacement of limit switches, inductive and optical sensors (photocells) with new ones. We specialize in wood joining machines. Installation, start-up and training of employees in the scope of machine operation in Poland included in the price, in other countries for an additional fee. We provide service and access to spare parts.

Condition: used, Roller conveyor with three ejectors Length: 5.5 m Fedpfoxtbt Nex Ab Tegk Roller width: 300 mm Roller diameter: 100 mm Working height: 940 mm