Used Demag Chain Hoist for sale (556)

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Sumitomo DEMAG Systec 170/520-600 NC 5 Year of manufacture: 2008 Control system: NC 5 Screw: 45mm Injection volume: 323ccm / 294g Clamping force: 1700KN Tie-bar spacing: 520mm x 520mm Mold height: min 275mm - max 585mm Maximum plate spacing: 1085mm Opening stroke: 500mm Ejector stroke: 160mm Core pull: 2x Pneumatic valve: 1x Equipment: Core pull, 2-circuit, serial to tool movement on the movable platen Pneumatic valve 5/2, No. 1, on the movable tool platen Ejector parallel to the tool movement Clamping force controlled Freely programmable inputs/outputs (3 inputs/3 outputs) 3 in/3 out, freely programmable Start/stop program (with purging) Interface for handling, Euromap 67 (50-pin) Interface for tool protection (ejector plate safeguard) Plug-in ejector plate safeguard Integrated hot runner control, 8 zones Tool protection Switch-off of tool cooling Closed-loop clamping force control Active mold protection via sensor Hydraulic screw drive, high speed Temperature control of cooling feed zone Follow-up pressure switchover WID 1 circuit Back pressure programmable Injection via DFE pump, speed closed-loop Intrusion Reduced nozzle sealing force at open mold, programmable Process data recording (PDE) with graphics and control Extended storage for process/mold data and report lists on internal memory Program for storing process data on external memory Switch-on/off program with purging Flexible clamping sequence with ejector and cores Amendment report Event history Help function, integrated hints via control Detailed hints via control Preventive maintenance program 2 freely programmable screens Intrusion 2x socket combination 380V, 230V Printer Change journal PDE control, graphics ERGOStart Knedpjz Rkmfjfx Anuec The machine is currently being overhauled and tested for functionality.

Condition: used, Year of construction: 2023, Machine No. 26, Serial No. 7271-0616, NC5+ control system, maximum clamping force 1,300 kN, conveyor system, manufacturer Colortronic, handling system, manufacturer Wittmann, type Primus 14-0704, year of manufacture 2023, safety enclosure, conveyor belt, L/W approx. 1,800 x 800 mm, skylight. Kodpfxjz H Rc Do Anujnc

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: TD2002/0365, DEMAG KBK overhead crane, span approximately 4x4m – expandable upon request! Load capacity / lifting capacity: 500 KG - 0.5 tons Technical data of the system: Overhead crane track made of Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, supports/hangers, etc. Includes Dalmec manipulator PFS 120KG NL Articulating boom, rotatable 360 degrees, with approximately 3m reach The crane is disassembled and immediately available Ksdpoztutvsfx Anujnc Very good condition, see pictures The item is located in 75053 Gondelsheim Shipping via freight forwarder or collection only by prior appointment Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity 125KG - 1600KG Please inquire about your overhead crane with the required load capacity and dimensions.

Condition: excellent (used), Year of construction: 2007, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, injection pressure: 1,865 bar, injection weight: 192 g, mold height (min.): 200 mm, ejector stroke: 100 mm, Year of manufacture: 2007 Injection shot weight: 192g Injection unit 410 Screw diameter: 40 mm Specific injection pressure: 1865 bar Injection volume: 217 ccm Injection shot weight: 192 g Screw L/D ratio: 20 Mold closing unit 100 Mold plate dimensions: 600x600 mm Distance between columns: 420x420 mm Ejector force: 35 kN Mold height: 200 mm Ejector stroke: 100 mm Weight: 5000 kg Control system: NC4 Tooling: - 2 x hydraulic core - pneumatic valve Knsdpfxszt I Rno Anujc - Euromap 67 connector

Condition: excellent (used), DEMAG / ABB / TELEMECANIQUE – Frequency Converters / Inverters – 11 units: Ksdpfx Ajyu S Alsnuonc 1. DEMAG Type - ACS800 04M-0140-3+D150+E210+H355+H356+H360 with resistance unit (new) – 1 unit. 2. DEMAG Type - ACS800 04M-0210-3+D150+E210+H355+H362+N672 with resistance unit (used) – 1 unit. 3. DEMAG Type - UD DPU415V024E10 – 1 unit. 4. TELEMECANIQUE Type - ATV 58ED23N4 – 15 kW (in original packaging). 5. DEMAG Type: ABB – ACS 800 – 2 units. 6. DEMAG Type: ABB – ACS 800 – 1 unit. 7. VACON / AC DRIVE – 3 units. 1. VACON Type: X4K40400C 2. VACON Type: XX4K440075C 3. AC DRIVE Type: X4K40075C1 8. AC DRIVE Type: X4 – 1 unit.

Condition: excellent (used), DEMAG / ABUS / STAHL / KONECRANES / SCHNEIDER / TELEMECANIQUE – Pendant control stations / Pendant pushbutton stations / Empty enclosures: DEMAG Pendant Control Station / Pendant Pushbutton Station: 1. Type: DST 9 / DST 6/7 / DST 6 / DST 3 – 27 units (used). 2. Type: DRC10 2ST D3 – 2 units (new). 3. Type: DSE 10CS – 1 unit (new). 4. Type: DST 9 SP222 – 1 unit (new). Kjdpsyvuakofx Anuenc 5. Type: DSE 8 P222BE – 1 unit (used). 6. Type: DCS – 1 unit (new). ABUS Pendant Control Station / Pendant Pushbutton Station: 1. Type: 70268 – 2 units (new). 2. Control cable Type: SC15X1 L., 2000 mm – 2 units (new). STAHL Pendant Control Station / Pendant Pushbutton Station: 1. Type: STH 1202 - 021 – 1 unit (new). 2. Type: STH 1202 - 021 – 1 unit (used). KONECRANES – 1 unit (new). SCHNEIDER Pendant Control Station / Pendant Pushbutton Station: 1. Type: XACA 1436217 – 1 unit (new). TELEMECANIQUE Pendant Control Station / Empty Enclosures: 1. Type: XAC A08 – 2 units (new). 2. Type: XAC B02 – 2 units (new). 3. Type: XAC B06 – 1 unit (new). 4. Type: XAC B04 – 1 unit (new). ROTARY SWITCH – pushbutton – 1 unit (original packaging).

Condition: new, Bottom blocks / crane hooks / hooks – 53 pieces: Knjdpeyvvbcofx Anujc Bottom block – 40 tons for DH / DR / DMR (price and photos on request) Bottom block – 32 tons for DH 2000 / P2000 (price and photos on request) 1. Bottom block – 20 / 25 tons – (1 piece). 2. Bottom block – 12.5 tons – (1 piece). 3. Bottom block – 12.5 tons (without hook safety latch) – (1 piece). 4. Bottom block – 10 tons – (2 pieces). 5. Bottom block – 6.3 tons – (1 piece). 6. Bottom block – 12 / 10 tons / 6.3 tons / 3.2 tons / 2.5 tons – (3 pieces). 7. Bottom block – 5 tons / 3.2 tons – (2 pieces). 8. Bottom block – 4 tons (2 pieces, unused with storage marks). 9. Bottom block – 3.2 tons (2 pieces, used). 10. Bottom block – 2.5 tons, without hook (2 pieces). 11. Hook for chain hoists – 2 / 2.5 tons (1 piece). Abus bottom block / hooks: 1. Abus bottom block – 30 tons (used). 2. Abus bottom block – 12.5 tons (new, without hook safety latch). Konecranes bottom block – 5 tons (used). Hook – 150 tons (2 pieces, new). Hook – 40 tons (1 piece, new). Hook size no. – 2.5 (1 piece). Hook – 15 pieces. Hook – 12 pieces. Hook – 15 pieces.

Condition: used, functionality: fully functional, machine/vehicle number: 001656U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 18,100 mm span x 6,300 kg capacity. Ref. 001656U * Stored in a dry environment Knjdpfx Aszilalsnuec * Technically 100% sound and inspected All our new and used cranes, which we supply and install, come with a warranty! We can also supply our cranes with the following options: * Adjustment of length and/or height, and optional repainting * Power rails / conductor bar system * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Spare parts for your lifting equipment * Swing cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag spare parts. For more information, please visit the Jan Reiling B.V. website. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment, cranes, universal crane, hoist. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001657U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 18,100 mm span x 6,300 kg capacity. Ref. 001657U * Stored indoors * Technically 100% in order and inspected All our new and used cranes, which we supply and install, come with a warranty! We can optionally supply our cranes including: * Adjustments to length and/or height, and repainting if required * Power rail / conductor bar system * Radio remote control * Tandem control * Assembly and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Knsdpszila Esfx Anusc Cranes, overhead crane, jib crane, workshop crane, warehouse crane, hoist, crane, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: new, functionality: fully functional, power: 3.1 kW (4.21 HP), rotational speed (min.): 725 rpm, rotational speed (max.): 1,450 rpm, Demag motor KBA140 B8/4 Duty cycle: 40/40% Knjdpfozqtg Nox Anuoc Price upon request 3.1 / 6.2 kW 725 / 1450 rpm 15.2 A 400 V 50 Hz Long shaft version. Condition: New or fully overhauled.

Condition: good (used), Year of construction: 1993, Overhead crane, crane, trolley, crane running gear, crane travel gear, girder travel gear, head girder for bridge cranes, ceiling crane head girder, head girder for single-girder bridge crane, crane runway girder -Manufacturer: Demag, 1 set of end girders for single girder bridge crane -Type: ELV -Carrying rollers: Ø 160 mm Kedpfoyzw Iusx Anuenc -Hole spacing: 290 mm Ø 20 mm / Dimensions see photos -Transport dimensions: 2355/365/H245 mm -Weight: 302 kg

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Knjdpfx Anjy Hmfyeuec Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.

Condition: new, Radio remote control / joystick transmitter / transmitter / receiver: Ksdpfjyuy S Ujx Anuonc 1. Radio remote control / joystick transmitter / transmitter Type: DRC - JD2 with 4 batteries (new). 2. Transmitter type: DRC - 10 2ST D3 - 2 units (new). 3. Receiver type: DRC - MP D3 (new). 4. Circuit board type: DRC - DR D3 (new). 5. Electrical enclosure with receiver type: HBC FSE516 6. Receiver type: RC - E10 7. Radio remote control / joystick transmitter / transmitter - 2 units: Type: FSS760 - 40 Type: 716 - K 12973 8. Radio remote control / joystick transmitter / transmitter - 2 units: Type: F24 - 60 TK 9. Radio remote control / joystick transmitter / transmitter - 2 units: Type: F25 - 6D

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8673 0023, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, plate width: 1,880 mm, plate height: 2,150 mm, Regularly maintained machine - see repair history TECHNICAL DETAILS Clamping force: 15,000 kN Mounting plate dimensions (H x V): 2,150 mm x 1,880 mm Clear distance between columns (H x V): 1,500 mm x 1,250 mm Min./Max. mold height: 700 mm - 1,400 mm Maximum opening distance: 2,900 mm Control: DIAS Injection unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight: 9,880 g Injection pressure: 1,454 bar Electrical and hydraulic equipment Rated power of pump motor: 165 kW Heating power: 97 kW MACHINE DETAILS Net weight with control cabinet: 21,000 t Dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Electrical connection Main connection: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Repair history 2010: New screw with RSP and tube 2015: New Ibed 2015: New wiring board 2017: Motor and pump 2 new 2017: Injection cylinder BS piston rod new with seals 2017: Circulation pump oil cooler replaced Knodpjy T Hy Dsfx Anuec 2017: Teachbox replaced (Rob) 2018: Pumps P 1 + 3 replaced (at 65,800 h) 2018: Hydraulic oil change 2019: New injection valve 2019: Dosing inverter overhauled by Fa. Eichler 2021: Motor P1 new 2022: New RSP EQUIPMENT - Wittmann W 753 Robot - 2008 - Cage and conveyor belt

Condition: new, functionality: fully functional, Basic Drive Specifications (ACS800-DEMAG 04M-0170-3) Product Series: ACS800 (ABB Industrial Low-Voltage Drive) Application Software: DEMAG (Loaded with Demag's proprietary crane control program rather than standard ABB firmware). Construction Type: 04M (Drive module designed for cabinet installation with specialized mechanical configurations). Rating/Size: 0170 (Nominal current rating indicator; fits an R7 frame size).Normal Output Power: 132 kW Continuous Max Current: 248 A Heavy-Duty Power (Cranes): 110 kW (with 202 A continuous output) Voltage Rating: 3 (Three-phase input supply voltage of 380 V to 415 V AC). Hardware & Software Option Codes (+D150+E210+H355+H362+J400+L501+L502) The plus-codes define the factory-installed modifications and optional expansion modules: Code Component / Feature Description +D150 Brake Chopper Built-in dynamic braking control module. Essential for hoisting to safely dissipate energy generated during load lowering. +E210 EMC Filter Low electromagnetic emission filter conforming to standard European industrial standards (Category C3/Class A). +H355 Control Cabling Entry Specifies a specific bottom or standard orientation configuration for thick power/motor cables. +H362 Coated Circuit Boards Provides an extra layer of protective chemical coating on internal PCBs to prevent corrosion from dust, humidity, or aggressive industrial environments. +J400 Control Panel (CDP312R) Removable digital control panel with alphanumeric display mounted on the unit or cabinet door for programming and metrics tracking. +L501RDIO-01 Digital I/O First digital I/O extension module, giving extra programmable inputs/outputs for crane safety limits or interlocking. +L502RAIO-01 Analog I/O Analog I/O extension module, allowing precise master/joystick references or load cell signal reading. Ksdpfx Asy Udtksnuonc Brand new never used. Please check out our other listings as well.

Condition: like new (used), Ident No. 87481044 Knsdpfx Anozc H Hnjujc SED2Z Application: Keyboard Width: 86 mm Height: 67 mm Depth: 63 mm Weight: 252 g Condition: Like new

Condition: new, Year of construction: 2019, functionality: unexamined, machine/vehicle number: 40906979, Multiple units in stock. The products are new and unused. Kjdpfxoywy Dws Anusnc

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: ZBA112 A4 / A70D, power: 4 kW (5.44 HP), rotational speed (max.): 1,440 rpm, Demag motor ZBA112 A-4 Gearbox A70D H-1-44.1) 4 units in stock Condition: Used, in very good condition. ED=100% 4.0 kW 1440 rpm Brake 47.0 Nm B140 400V 50Hz Knsdpfoywi Edsx Anusc Price on request

Condition: new, Year of construction: 2022, power: 7.5 kW (10.20 HP), rotational speed (max.): 1,435 rpm, ZBA132 B-4 B050 / A70D H-1 i= 16.7 Condition: New ED = 60% kW = 7.5 Knodoywi Rgjpfx Anusc 1/min = 1435 380-400V 50 Hz Brake = 50 Nm Included: Pulse encoder Extra cooling fan Price on request

Condition: new, DEMAG control box / switch cabinet for hoist / wire rope hoist - DR / DMR / DH 1. Demag control box DR / DMR with frequency inverter DIC - 4 - 007 - C - 0032 - 05 Kodpfsyut Aajx Anusnc 2. Demag control box / switch cabinet for DH hoist

Condition: used, functionality: fully functional, Year of construction: 2003, machine/vehicle number: 001669U, load capacity: 500 kg, For sale Used Demag single-girder overhead crane, 15,124 mm span x 500 kg capacity. Ref. 001669U * Stored indoors * Technically 100% in order and inspected All our new and used cranes, which we deliver installed, come with a warranty! We can optionally supply our cranes including: * Adjustments in length and/or height and, if required, repainting * Power rail / conductor bar system * Radio control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. Knjdpfx Anezrthioujc For more information, please visit the Jan Reiling B.V. website. Cranes, crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall cranes, bridge cranes, workshop cranes, storage cranes, lifting equipment, cranes, universal crane, hoist. Overhead crane, overhead traveling crane. Single-girder, single beam. Chain hoist.

Condition: good (used), Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 420 mm -Item No.: 829676.44-01 -Groove width: 37 mm -Hole: Ø 70 x 55 mm -Quantity: 1x pulley available Knodpozh U Dqjfx Anusc -Dimensions: Ø 420 x 50 mm -Weight: 20.1 kg

Condition: excellent (used), Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 260 mm, unused -Groove width: 24 mm -Hole: Ø 50 x 45 mm -Number: 2x pulley available -Price: per piece -Dimensions: Ø 260 x 45 mm -Weight: 6.6 kg/pc. Kjdpfx Aezh U N Tsnusnc

Condition: good (used), Gearboxes, spur gears, bevel gears, worm gears, crane gearboxes -Manufacturer: Demag, Gearbox type 52 DF -Translation: i = 10.7 Knodpfoziaq Sex Anuoc -Shaft: Ø 25 x 60 mm -Dimensions: 230/252/H252 mm -Weight: 17.2 kg

Condition: good (used), Bridge crane, overhead crane, bearing housing, trunnion, bearing block, swivel mounting, bearing housing for crane hooks, crane hook bearing -Manufacturer: Demag, bearing housing crane hook bearing -Type: P5013 STB No. 6 Knodpfxsziayye Anujc -Bore: Ø51 mm -Dimensions: see photos -Dimensions: 180/130/55 mm -Weight: 6.0 kg