Used Demag Ac 80 for sale (509)

Condition: good (used), Crane system with two fixed (l= ~6.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Ncjdpfxsg Dgh Is Ahvep Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.

Condition: good (used), Crane system with two fixed (l= ~7.000 mm) and three running rails (l= ~5.000 mm) with trolleys which allow the mounting of log clamps with hoist. Tilt prevention system allows smooth and perfectly parallel displacing of the running rails. Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Nedeg Dghcepfx Ahvjcp Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.

Condition: good (used), Crane system with two fixed (l= ~14.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Tilt prevention system allows smooth and perfectly parallel displacing of the running rails. Nsdpeg Dgg Refx Ahvscp Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.

Condition: used, Technical details: Ncjdpoyuyiaofx Ahvep lifting capacity: 1,25 t lift: 4000 mm span width: 3000 mm pivoting angle: ca. 300 Grad total column height: 4020 mm stroke speeds: 8/2 m/min travel of hook: 4000 mm column diameter: 160 mm weight: 164 Kg dimensions L x W x H: liegend 4,2 x 3,5 x 0,2 m Column-mounted slewing crane with small foot flange octagonal 750 x 750 x 21mm - operation floor-operated pendant control - slewing electric/motor driven - jib LxWxH: 4100 x 125 x 300mm The crane is equipped with a new electric chain hoist STAR LIFTKET 1,0 to with electric trolley. Type 1000/2-4/1 Design 1000/2-4/1; lifting height 4.0m, lifting speed 4/1 m/min. Function: electric driving on carrier, up and down, as well as swiveling. without clamping plate! *

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: LS137, Technical Data: 1x Demag KBK 2 pillar slewing crane, nominal load (NL) 500 kg with Demag DK chain hoist Load capacity at full outreach: 500 kg Height: approx. 4.05 m Underside of jib: approx. 3.55 m Outreach: 4 m Hook height: approx. 2.8 m Total weight: approx. 1,000 kg incl. anchor plate 115x115 cm With 500 kg Demag DK chain hoist incl. bolts, cable carrier, trolley, end cap, etc. Slewing range: 300°, connection at 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes with load capacities from 80 kg to 5,000 kg available on request See pictures Njdpfxoywfmwo Ahvocp Shipping via forwarding agent or collection by appointment only

Condition: excellent (used), functionality: fully functional, Year of construction: 1986, machine/vehicle number: LS14 + RIO RES, Technical Data: 1x Demag KBK 2 pillar slewing crane NL 500KG with Demag PK chain hoist There are 4 cranes available!! Load capacity at full outreach: 500KG Height: approx. 3.55m Underside of jib: approx. 3m Outreach: 3m Hook height: approx. 2.6m Nsdpfxjywfl Te Ahvscp Total weight: approx. 300KG With 500KG Demag PK chain hoist Incl. bolts, cable trolley, trolley, end cap, etc. Slewing range 300°, connection to 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim, Germany Further cranes with capacities 80-5000Kg available – please inquire See pictures Shipping via freight forwarding or collection only by appointment

Year of construction: 1995, condition: good (used), DEMAG Electric Hoist DKUN 5-500-K-V1F4 Type: Electric chain hoist Year: 1995 Chain: 3 meters Three-phase 380V Ncodjudv Tkjpfx Ahvjp Capacity: 1.000Kg 2 speeds (12,5m/min. - 6,2m/min.) 1.7Kw

Condition: used, Year of construction: 1994, functionality: fully functional, power: 0.75 kW (1.02 HP), protection type (IP code): IP55, We offer this used Mannesmann Demag 500-K-V1 Big Bag Discharging Station, year of manufacture 1994. Ncsdeyv Uz Uepfx Ahvep Permissible load capacity: 0.5 t Year of manufacture: 1994 Hook lift: 10 m Chain dimensions: 5.8 x 15.2 mm Chain group: 10 H Lifting speed under load: 8 m/min Lifting speed unloaded: 4 m/min Rated motor power: 0.75 kW Rated current: 2.3 A Rated motor speed: 2680 rpm Protection class: IP55 If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 2011, functionality: fully functional, travel distance Z-axis: 1,500 mm, Equipment: documentation/manual, Number of axis: 3 Nodpfx Ahoyfhw Hsvscp Reach: 1500 mm Payload: 5 kg X=420mm Y=1200mm Z=1500mm c= 0-90 pneumatic

Condition: excellent (used), Chain Hoists - DEMAG / STAHL - 14 units: 1. Demag DKUN 10 - 2.5 t. 2. Demag PK10 - 2 t with electric travel trolley, control box, cables. 3. Demag PK 10 - 1000 kg. 4. Demag DKUN 5 - 500 kg. 5. Demag D-BE - 160 kg. 6. Demag PK 2 F - 500 kg. 7. Demag PK 2 N-F - 250 kg. Ncsdpfsyvwbwox Ahvjp 8. Demag chain hoist - 3 units: 1. Demag DKUN 2 - 250 kg. 2. Demag PK 2 N - 500 kg. 3. Demag PKVUN 1 - 125 kg. 9. Demag PK 1 N - 125 kg. 10. Demag Motor PKUN 1 - 125 / 250 kg. Stahl chain hoists: 1. Stahl T 405 M - 1000 kg. 2. Stahl T 302 S - 500 kg.

Condition: new, Bottom blocks / crane hooks / hooks – 53 pieces: Bottom block – 40 tons for DH / DR / DMR (price and photos on request) Bottom block – 32 tons for DH 2000 / P2000 (price and photos on request) 1. Bottom block – 20 / 25 tons – (1 piece). 2. Bottom block – 12.5 tons – (1 piece). 3. Bottom block – 12.5 tons (without hook safety latch) – (1 piece). 4. Bottom block – 10 tons – (2 pieces). 5. Bottom block – 6.3 tons – (1 piece). 6. Bottom block – 12 / 10 tons / 6.3 tons / 3.2 tons / 2.5 tons – (3 pieces). 7. Bottom block – 5 tons / 3.2 tons – (2 pieces). 8. Bottom block – 4 tons (2 pieces, unused with storage marks). 9. Bottom block – 3.2 tons (2 pieces, used). 10. Bottom block – 2.5 tons, without hook (2 pieces). 11. Hook for chain hoists – 2 / 2.5 tons (1 piece). Abus bottom block / hooks: 1. Abus bottom block – 30 tons (used). 2. Abus bottom block – 12.5 tons (new, without hook safety latch). Konecranes bottom block – 5 tons (used). Hook – 150 tons (2 pieces, new). Ncodpoyvvbcsfx Ahvsp Hook – 40 tons (1 piece, new). Hook size no. – 2.5 (1 piece). Hook – 15 pieces. Hook – 12 pieces. Hook – 15 pieces.

Condition: excellent (used), DEMAG / ABUS / STAHL / KONECRANES / SCHNEIDER / TELEMECANIQUE – Pendant control stations / Pendant pushbutton stations / Empty enclosures: DEMAG Pendant Control Station / Pendant Pushbutton Station: 1. Type: DST 9 / DST 6/7 / DST 6 / DST 3 – 27 units (used). 2. Type: DRC10 2ST D3 – 2 units (new). 3. Type: DSE 10CS – 1 unit (new). 4. Type: DST 9 SP222 – 1 unit (new). 5. Type: DSE 8 P222BE – 1 unit (used). 6. Type: DCS – 1 unit (new). ABUS Pendant Control Station / Pendant Pushbutton Station: 1. Type: 70268 – 2 units (new). 2. Control cable Type: SC15X1 L., 2000 mm – 2 units (new). STAHL Pendant Control Station / Pendant Pushbutton Station: 1. Type: STH 1202 - 021 – 1 unit (new). 2. Type: STH 1202 - 021 – 1 unit (used). KONECRANES – 1 unit (new). SCHNEIDER Pendant Control Station / Pendant Pushbutton Station: Njdpfx Aheyvuaksvjcp 1. Type: XACA 1436217 – 1 unit (new). TELEMECANIQUE Pendant Control Station / Empty Enclosures: 1. Type: XAC A08 – 2 units (new). 2. Type: XAC B02 – 2 units (new). 3. Type: XAC B06 – 1 unit (new). 4. Type: XAC B04 – 1 unit (new). ROTARY SWITCH – pushbutton – 1 unit (original packaging).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, overall weight: 11,800 kg, total length: 16,700 mm, load capacity: 10,000 kg, working height: 11,350 mm, lifting height: 11,350 mm, Equipment: documentation/manual, Demag overhead crane – Type: double-girder – Capacity: 2x 5,000 kg – Lifting height: 11.35 m – Year of manufacture: 2021 – Hoist type: wire rope hoists – FEM/ISO hoists: 2m / M5 – Manufacturer: Demag / Siempelkamp Dimensions – Span: 16,700 mm (center-to-center) – Total length: 17,000 mm – Installation height: 1,600 mm – Width: 3,860 mm – Wheelbase: 3,150 mm – Suitable for crane rail: A55 / 50 x 30 mm – Net weight: 11,800 kg Speeds – Hoisting: 8/1.3 m/min – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Features – Control: radio control – Crane manual available: yes Nedpfx Ahsyvr Hujvecp – Electrical diagrams available: yes – Condition: in very good condition. – Disassembled: yes, available immediately – Special features: 8.5 ton Equator with carousel available as option

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, overall weight: 3,700 kg, total length: 12,500 mm, total width: 2,932 mm, load capacity: 8,000 kg, main lifting speed: 12,500 mm/min, working height: 10,000 mm, lifting height: 10,000 mm, Equipment: documentation/manual, Demag Overhead Crane – Type: single-girder – Capacity: 8,000 kg Njdpfx Ajyvfn Rshvscp – Lifting height: 10 m – Year of manufacture: 2017 – Hoist type: wire rope hoist – FEM / ISO hoist: 3m / M6 – Manufacturer: Demag Dimensions – Span: 12,500 mm (center-to-center) – Installation height: 1,031 mm – Width: 2,932 mm – Wheelbase: 2,500 mm – Suitable for crane rail: 50 x 30 mm – Dead weight: 3,710 kg Speeds – Hoisting: 0.5–12.5 m/min (stepless) – Trolley travel: 3–30 m/min (stepless) – Crane travel: 6–60 m/min (stepless) Features – Control: radio control – Crane manual available: yes – Electrical diagrams available: yes – Condition: like new – Disassembled: yes, available immediately – Equipped with weight display

Condition: excellent (used), DEMAG / ABB / TELEMECANIQUE – Frequency Converters / Inverters – 11 units: Nodpfx Asyu S Alshvecp 1. DEMAG Type - ACS800 04M-0140-3+D150+E210+H355+H356+H360 with resistance unit (new) – 1 unit. 2. DEMAG Type - ACS800 04M-0210-3+D150+E210+H355+H362+N672 with resistance unit (used) – 1 unit. 3. DEMAG Type - UD DPU415V024E10 – 1 unit. 4. TELEMECANIQUE Type - ATV 58ED23N4 – 15 kW (in original packaging). 5. DEMAG Type: ABB – ACS 800 – 2 units. 6. DEMAG Type: ABB – ACS 800 – 1 unit. 7. VACON / AC DRIVE – 3 units. 1. VACON Type: X4K40400C 2. VACON Type: XX4K440075C 3. AC DRIVE Type: X4K40075C1 8. AC DRIVE Type: X4 – 1 unit.

Condition: excellent (used), 1. DEMAG gearboxes / crane gearboxes – 10 units. Type: AFM 06 – 1 unit Type: AFM 05 – 1 unit Type: AFM 04 – 1 unit (3 units available). Type: AFM 04 – 1 unit Type: ADE 50 DD – 1 unit Type: Bevel gearbox AFW 08 – 1 unit Type: WUK 60 TD – 1 unit Type: P 208 – 1 unit Ncsdpfjyu Sbuox Ahvep

Condition: excellent (used), functionality: fully functional, Year of construction: 1986, machine/vehicle number: MIKA-CN, Technical specifications: 1x Demag KBK 1 pillar jib crane, rated load 125 kg with Demag DC chain hoist (125 kg - year 2007) Load capacity at full outreach: 125 kg Height: approx. 3.05 m Underside of jib: approx. 2.55 m Outreach: 3 m Hook height: approx. 2.15 m Total weight: approx. 300 kg Njdpfxeyu E I Ie Ahvocp Equipped with 125 kg Demag DC chain hoist Including pin, cable drag chain, trolley, end cap, etc. Slewing range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location: 75053 Gondelsheim Additional cranes with load capacities from 80–5000 kg available, please enquire See photos Shipping via freight forwarder or collection by appointment only

Condition: new, Radio remote control / joystick transmitter / transmitter / receiver: 1. Radio remote control / joystick transmitter / transmitter Type: DRC - JD2 with 4 batteries (new). 2. Transmitter type: DRC - 10 2ST D3 - 2 units (new). 3. Receiver type: DRC - MP D3 (new). 4. Circuit board type: DRC - DR D3 (new). 5. Electrical enclosure with receiver type: HBC FSE516 6. Receiver type: RC - E10 7. Radio remote control / joystick transmitter / transmitter - 2 units: Type: FSS760 - 40 Type: 716 - K 12973 8. Radio remote control / joystick transmitter / transmitter - 2 units: Ncsdpfx Asyuy S Uehvop Type: F24 - 60 TK 9. Radio remote control / joystick transmitter / transmitter - 2 units: Type: F25 - 6D

Condition: new, DEMAG control box / switch cabinet for hoist / wire rope hoist - DR / DMR / DH Nodpfx Aheyut Aaovscp 1. Demag control box DR / DMR with frequency inverter DIC - 4 - 007 - C - 0032 - 05 2. Demag control box / switch cabinet for DH hoist

Year of construction: 2019, operating hours: 17,716 h, condition: ready for operation (used), General Data Measurements width 1920 cm Measurements depth 7750 cm Machine weight 26210 kg Measurements height 2410 mm Nodpfx Ahex D Nx Iovecp This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2003, operating hours: 96,986 h, clamping force: 600 kN, screw diameter: 30 mm, This DEMAG ET60-200 concept hydraulic injection moulding machine was manufactured in 2003. It features a clamping force of 600 kN and a maximum mold weight of 580 kg. The machine includes a robust injection unit with a screw diameter of 30 mm and an injection pressure of 1900 bar. Consider the opportunity to buy this DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Tie bar spacing (H x V): 420 x 420 mm • Platen dimensions (H x V): 530 x 540 mm • Min. mold installation height: 210 mm • Opening stroke: 400 mm • Max. mold weight: 580 kg (moving side 380 kg / fixed side 200 kg) • Ejector: • Stroke: 125 mm • Force: 41 kN • Retraction force: 15 kN • Pneumatic ejector: Yes • Core pull control: Yes (2 units, on the ejector side/AS) • Injection unit 1: • Unit size: 200 • Screw diameter: 30 mm • Injection pressure: 1900 bar • Stroke volume: 106 ccm • Shot weight (PS): 94 g • Screw L/D: 20 • Nozzle radius: 15 mm • Armored/wear-resistant injection unit: Yes • Process control: SPC (Yes) • Note: Maximum crane load warning: 2 metric tons Additional equipment • Robot/removal device: W621-1381 • Travel paths: Y 1200 mm, X 550 mm, Z 1500 mm • Hot runner controller: 7-zone integrated control Njdpfx Ajyg Nfushvjcp • Mold sensors: Kistler (p=1/t=0)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, screw diameter: 45 mm, total height: 2,213 mm, overall weight: 15,750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Additional equipment • Fanuc Robot Machine Benefits Qualitative Machine Benefits • Process data acquisition, mould protection Technical Machine Benefits • Mould height min: 350 mm / mould height max: 745 mm • Main electronic connection: 3/400 v 50hz • Programmable sequence, highly dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Extra Information Standard equipment: Support of the moving mould mounting platen via linear guides/ Ejector short / long stroke/ Interface for external printer (hardcopy)/ Individual axis movement optimization (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Pump drive power II, increased (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Mains connections drive / heating separate/ Data display coloured/ Oil cooler reinforced (cooling water supply up to 35 °C)/ Water connection for mould and machine cooling separate/ Basic version Europe/ Corrosion protection/ Ncjdjx D Hntopfx Ahvjp Paint finish: Deep black (RAL9005): Machine bed with internals, lower switch cabinet/ Signal white (RAL9003): Clamping unit, injection unit, nozzle guard/ Signal white (RAL9003): Fixed safety devices, upper switch cabinet/ Signal white (RAL9003): Safety doors/ Textured surfaces: Elastic machine bearings/ Digital and wear-free position measuring system (ultrasound/high-resolution rotary encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (according to EUROMAP March '96)/ Centring diameter fixed platen: 160 mm/ Centring diameter moving platen: 160 mm/ Without side ejector plate/ Standard mold installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety gate is closed)/ Ejector with position control (p/F+v independently programmable, parallel to mold movement)/ Toggle lever oil lubrication/ Injection unit/ Optional equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for ultra-fine filtering in the bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), can be disconnected via main switch/ Socket IECEE 3Ph / 400V-16A, can be switched off via main switch/ Flashing light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on movable tool plate (programmable)/ 6 pneumatic 5/2-way valves on fixed tool plate (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with non-return valves)/ Manual pressure relief for core pull 1-circuit/ Protective clothing on operator side widened (250 mm)/ Hot runner control 12 zones, integrated (2, 75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/ Holding pressure switchover dependent on hydraulic pressure (with pressure recording)/ Nozzle contact pressure when mold is open (programmable)/

Condition: ready for operation (used), Year of construction: 2013, operating hours: 27,551 h, clamping force: 2,200 kN, total height: 2,100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 22 Machine Benefits Technical Machine Benefits • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / maximum shot volume: 329 cm³ / maximum shot weight: 293 g / injection rate without accumulator: 254 cm³/s • Dosing stroke: 207 mm / maximum nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kn / number of heating zones: 4 / hopper capacity: 50 l / maximum injection speed: 160 mm/s • Holding force: 2420 kn / maximum opening stroke: 550 mm / minimum mold height: 300 mm / maximum mold height: 580 mm / maximum platen distance: 1130 mm • Mold clamping plates (hxv): 880x830 mm / clearance between tie bars (hxv): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kn Njdpox D Hnyefx Ahvjcp • Dry cycle time according to euromap 6 (stroke): 427 mm • Net weight without oil: 10100 kg Dimensions Machine Depth 6460 mm

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. • 5x similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating Nodox D Rqropfx Ahvocp • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mold and oil cooling • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centering diameter (D=100/125) for fixed mold platen • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, clamping force: 500 kN, screw diameter: 25 mm, injection weight: 46 g, total height: 1,779 mm, overall weight: 4,200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Additional equipment • Granule Dryer Ncsdpfxjx D Eccs Ahvop • Handling System • Conveyor Belt - 1400 mm x 400 mm • Precision Scale • Temperature Units - 2x HB‑Therm Machine Benefits Technical Machine Benefits • Exceptional energy efficiency • Enhanced platen rigidity and mold safety • Fully electric direct-drive system • Ultra-precise direct-drive motors with 0. 1 ms response time • Displacement: 52 cm³ • Spray pressure: 2180 bar • Tool clamping platens: 520 x 570 mm Extra Information Control Unit Advanced control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Dimensions Machine Depth 4308 mm