Used Demag Ac 40 for sale (497)

Year of construction: 1972, condition: used, functionality: fully functional, machine/vehicle number: TRFA12+14x, 1x Demag friction wheel drive travel drive for rope hoist crane hoist P-train bridge crane etc Stock from years of construction 1971 + 1976: Hjdst Rtm Njpfx Afiofn 14x RF310 - motor type 16/6KF8-2 0,15-0,6KW 5m/25m/min price 2850.- / pc. 12x RF400 - motor type 19/11KF12-2/2 0,18-1,1KW 6,3m/40m/min Price 3650.- / pc. with 2 speeds Complete with tension clamps, motor/gearbox and friction wheel We can also overhaul defective, porous friction wheels for you and have new ones made - please enquire. Weight complete approx. 100-150 kg, connection to 380V 50Hz Used condition Item location is 75053 Gondelsheim See pictures

Condition: used, Year of construction: 2001, Clamping force: 350 t Platten dimensions: 1040 x 950 mm Distance between tie bars: 710 x 630 mm Screw diameter: 50 mm Shot weight: 400 g Shot volume: 442 cm3 -2 core pullers -2 air valves, controllable hot runners: 1-16 chanel -1 kaskade Hjdpfxsva Ht Se Afiefn Type: Horizontal Drive: Hydraulic

Condition: used, Year of construction: 1987, machine/vehicle number: 001256U en 001257U, 2x Single-girder suspension crane 3.840mm x 0.5t Hfjdpfjf H A E Dsx Afijn

Condition: used, Column-Mounted Crane DEMAG type PK1 N-F Capacity: 125 kg Arm travel: 3500 mm Height under hook: 2200 mm Total column height: 3150 mm Height under arm: 2700 mm Hsdowvpvmjpfx Afiofn With electric hoist Chain exit: length 2100 mm In good condition Voltage: 380 V Weight: approx 250 kg

Condition: good (used), Indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T girders, IPB steel girders -Steel beams: for bridge crane, length 2x 13400 mm / 2x 11000 mm / 2x 7970 mm -Carrier: IPB 340, HEB 340 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos Hodpfx Afju Inrioiefn -Shipping/Price: in pairs or complete -Weight: 1650/1360/950 kg/pc. / 7920 kg total

Condition: good (used), DEMAG travel motor / crane motor / drive motor. Gear motor SBA 100 B2 - 2 units. Motor type: SBA 140 B2 - 2 units. Motor type: SBA 125 B 8/2 - 1 unit. Motor type: SBA 125 B 4/2 - 1 unit. Motor type: SBA 100 b 4 - 2 units. Hedpeu Uvptjfx Afiofn

Year of construction: 1974, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: Si12,5, Demag P625 H13 4/1 wire rope hoist hoist crane indoor crane overhead crane payload 12500Kg -12,5t 380V 16A, hoist 6,5m, 4 strands ( 2 hoist speeds - 0,5 - 5m/min ) Hoist was overhauled by Erich Schäfer Hfsdpfx Afjupw Aljisn Corresponds to new condition Fully functional Pick up in 75053 Gondelsheim, forklift is available for loading Shipping by forwarding agent possible, please ask for zip code

Condition: used, Year of construction: 1998, Clamping force: 60 t Hedpfxjvurhqs Afiofn Screw diameter: 30 mm Shot weight: 96 g Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Shot volume: 106 cm3 1 x core puller Type: Horizontal Drive: Hydraulic

Condition: excellent (used), functionality: fully functional, DEMAG P400 hoist 6 parts in total - Fine-tuning FG Hfodpfjv Uvubox Afijn - Main hoist motor - Sheath - Rope drum - Rope guide - Brake Good condition, some in mint to new condition Info: 20,000 DEMAG spare parts and components in stock! Demag parts warehouse

Condition: good (used), DEMAG gearbox / crane gearbox: 1 gearbox type - AFM04 - 2 pieces 2 Gearbox type - AF05 - 3 pieces 3 Gearbox type - AFM06 - 1 piece 4 Gearbox type - AME40 DD - 1 piece Hfsdpfx Afou Uvzpoien 5 Gearbox type - ADE50 DD - 1 piece

Year of construction: 1979, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: Si3,2t, Demag rope hoist crane hoist 3200Kg P616H13 Payload 3200KG / 3,2t payload / lifting capacity - 2-fall Lifting height approx. 8m Weight complete approx. 350 kg, connection to 400V 50Hz Hfsdpfx Afjupwproijn Mint condition, completely overhauled by Erich Schäfer Item location is 75053 Gondelsheim See pictures

Condition: excellent (used), functionality: fully functional, DEMAG hoist motor ZBR132 B12/2 B140 for DR10 hoist very good condition Hfodev Uhwzopfx Afion Please also check out my other offers

Condition: good (used), functionality: fully functional, Year of construction: 1973, machine/vehicle number: BÜ177, Technical data: 1x Demag KBK 1 wall-mounted slewing crane SWL 250kg with Demag chain hoist 250kg Load capacity at full outreach 500kg / 0.5t load capacity Hfedpew Hn Trsfx Afisn Outreach: approx. 2m Total weight approx. 150kg incl. wall bracket Incl. pins, cable festoon, travel trolley, end cap, etc. Incl. Demag chain hoist NL 250kg (newer year of manufacture) Slewing range 300°, connection 400V 16A Crane is dismantled and immediately available Item location is 75053 Gondelsheim Additional cranes available, load capacity 80–5000kg, please enquire See pictures Shipping by freight forwarder or collection by appointment only

Year of construction: 1996, condition: used, machine/vehicle number: MBMAKZ, Demag chain hoist Crane hoist 250Kg DKUND 2-250 K V1 with double chain 125Kg payload each 250KG / 0.25t payload / lifting capacity - 1 fall Distance between the two lifting chains approx. 1.2m (can also be shortened) Hjdpfx Ajtn Rirsfiofn Lifting height approx. 3.5m Complete with control cylinder (approx. 3m) Weight complete approx. 60 kg, connection to 400V 50Hz TOP condition, fully functional. No worn or used device! Connect and put into operation. Comes from current operation Item location is 75053 Gondelsheim See pictures

Condition: good (used), functionality: fully functional, Year of construction: 1973, machine/vehicle number: NL, Demag P416 H7 4/1 wire rope hoist hoist crane indoor crane overhead crane payload 6300Kg - 6,3t 380V 16A, lift 3,5m, 4 strands ( 2 lifting speeds - 4 / 8 m/min ) Used condition Collection in 75053 Gondelsheim, forklift available for loading Hfjdpfx Aeupw A Sjfijn Shipping by forwarding agent possible, please ask for zip code

Year of construction: 2000, condition: used, Demag chain hoist crane hoist 250 kg DKUN 2-250 K V1 F4 approx. 20 pieces available!!! 250KG / 0.25t payload / lifting load - 1 strand with 2 lifting speeds, lifting height approx. 4m complete with control bottle (approx. 3m) and load hook Weight completely approx. 40 kg, connection to 400V 50Hz, connection plug is included TOP condition, fully functional. No worn or used device! Hfodpfxog Nyyno Afion Connect and put into operation. Comes from ongoing operations Item location is 75053 Gondelsheim See pictures

Year of construction: 1998, condition: used, machine/vehicle number: MBMAKZDoppel, 1 piece - Demag chain hoist Crane hoist 250Kg DKUND 2-250 K V1 with double chain 125Kg payload each 10 pieces are available 250KG / 0.25t payload / lifting capacity - 1 fall Distance between the two lifting chains variable 20-120cm, lifting height approx. 3m Without frame, only the chain hoist with both deflection rollers including the blue mounting plates is sold Weight complete approx. 50 kg, connection to 400V 50Hz TOP condition, fully functional. Not a worn or used device! Connect and put into operation. Comes from current operation Hedpfetn Ritsx Afiefn Item location is 75053 Gondelsheim See pictures

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 1900 mm Measurements depth 6600 mm Measurements height 2400 mm Machine weight 14900 kg Injection Unit Screw diameter 50 mm Shot weight 482 g Stroke volume 530 cm3 Injection pressure 2426 bar Adjustable heating zones 5 Nozzle pressure 110 kN Clamping Unit Clamping force 2500 kN Opening stroke 670 mm Max open daylight 1380 mm Mould height min 330 mm Mould height max 710 mm Hfedpfx Ajxnd Sqsfion Ejector stroke 200 mm Ejector force for / back 81 kN Media Pump drive power 30 kW Oil tank 550 L This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Year of construction: 2000, condition: ready for operation (used), Four injection molding machines from various manufacturers are available. 1) Arburg Allrounder Centex 420C 1000-350, year of manufacture: 1996, clamping force: 1000kN, heating power: 8.6kW, weight: approx. 3850kg. The door interlocks of the machine are defective, and both control blocks are leaking oil. 2) Battenfeld BA 500-200 CD Plus, year of manufacture: 1991, weight: approx. 2500kg. The machine shows general oil leaks, the motor is missing, and the radial piston pump is presumably defective. 3) Demag Ergotech Concept 1000/420-310, year of manufacture: 2000, screw diameter: 32mm. The end plate of the machine is cracked, and there are small oil leaks. 4) Demag Ergotech System 80-310, year of manufacture: 1996, max. operating pressure: 210bar, screw diameter: 35mm, cores: 1. Including Geiger handling unit. The door interlock is defective, and minor oil leaks are present. Documentation available. An on-site inspection is possible. Hfodpfx Afjxn S Tpeion

Condition: excellent (used), Year of construction: 2007, operating hours: 26,500 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 Bh Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar distance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1,180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm Hsdpfjxn N H Tex Afisfn Screw L/D ratio: 20 Shot volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2,050 bar Wear-resistant screw; bimetallic barrel, standard L:D Check valve (RSP), 3-piece, ring type Increased injection speed: 300 mm/s Additional Equipment Increased mould installation height (min. unchanged, max. increased) Electrical/hydraulic interface for connecting 2 hydraulic cores on the moving mould platen via a separate hydraulic unit Offer valid for the injection moulding machine only

Condition: used, Year of construction: 2010, clamping force: 500 kN, displacement volume: 1,779 cm³, injection pressure: 1,855 bar, overall weight: 24,500 kg, load hours: 15,000 h, screw conveyor diameter: 80 mm, terms of delivery: EXW (ex Works) Hjdpexluk Ejfx Afijfn delivery time: on request terms of payment: 100% prior to delivery

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. Hfodoxmbv Djpfx Afisn Application Types Injection Moulding

Condition: used, Year of construction: 2017, clamping force: 480 kN, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, overall weight: 20,500 kg, load hours: 12,000 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) delivery time: on request Hfjdpfjxlukxjx Afion terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2005, Clamping Unit Clamping force 4200 Kn This DEMAG Ergotech 420/810-2300 was manufactured in 2005. It is a hydraulic injection moulding machine featuring a clamping force of 4200Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 420/810-2300 hydraulic injection moulding machine. Contact us for more information. Hjdpfx Afexl H Dwsiofn Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 1998, Clamping Unit Clamping force 4200 Kn Hjdpoxl H D Rofx Afiefn This DEMAG Ergotech 4200-2300 was manufactured in 1998. It is a hydraulic injection moulding machine featuring a clamping force of 4200 Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 4200-2300 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding