Crane sky Crane overhead crane Crane runway

Demag Erikkila Portalkran 9,6x5,5m 500KG 2x Demag PK Kettenzug 2x0,5t Kran

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: TH241-14/433886, operating hours: 131 h, ABUS ELV crane system crane runway bridge crane indoor crane crane Load capacity / lifting capacity: 5t - 5000 kg Gauge: 13,500 mm, overall width approx. 13,700 mm Year built: 1999, with floor control Lifting height: 6 m Dksdpfjx Ev Tksx Akvjr Overall height from crane top edge to hook approx. 1,020 mm (Girder: 540 mm + lifting gear: 480 mm) End carriage length with buffers approx. 270 cm SWP: Full load hours used: 131, theoretical remaining service life: 1,469 hours Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipment by freight forwarding possible, please inquire with postal code Collection preferred

Condition: excellent (used), For sale: OMIS 5 TON bridge crane, ideal for industrial use in a warehouse or factory building. Dodsy Aymijpfx Akvskr 🔧 Main features: Capacity: 5 tons (5000 kg) Type: double-girder overhead crane Brand: OMIS (Italy) Span (rail distance): 20,000 mm (20 m) Hook travel: 6.6 m Robust box girder structure ⚙️ Performance: Lifting speed: 4 m/min Bridge travel speed: 30 m/min (fast) – 7.5 m/min (reduced) Trolley travel speed: 16 m/min Power supply: 380V three-phase – 50 Hz Pendant push button controls 🏭 Usage: Always operated inside a covered industrial building Ideal for workshops, steel fabricators, and heavy-load handling

Year of construction: 2003, condition: excellent (used), machine/vehicle number: MBUT133-544, DEMAG KBK crane canopy crane runway with dimensions approx. 10.5 x 6m Payload / lifting capacity 500 KG - 0.5to Technical data of the system: Crane runway made of Demag KBK1/2 rails System is supplied complete: KBK rails, rail joiners, trolleys, end plates, cable trailing, brackets incl. steel 500KG chain hoist - lifting height approx. 3m Crane is dismantled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Dkjdety Sxwepfx Akvsr Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: reconditioned (used), Yaskawa MOTOMAN MH6 DX100 KOPPENDORFER Roboterservice has specialized in MOTOMAN robots for 25 years! Robots are checked and freshly serviced by us. There is the possibility of commissioning and programming We have various MOTOMAN robots and spare parts in stock: HP20 DX100 MH6 DX100 HP20 NX100 ES165 NX100 ES200 NX100 ES200 RD DX100 SP80 NX100 Dodpfjr D N Dajx Akvekr UP6 XRC UP50 XRC EA1400 NX100 EA1900 NX100 RM500 RM250 etc.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, Characteristics: Capacity: 60 T Dkodpfxexlpnro Akvor Cat 1 – 32 T; Cat 2 – 40 T; Cat 3 – 32 T and monorail cat 2 x 5 T Span: 27.45 m Lifting height: 16.33 m

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 160 t, stroke length: 300 mm, table width: 1,250 mm, table length: 800 mm, installation height: 500 mm, EXNER EX SL 160 double column press NEW Machine is under construction Pressing force 1600 kN Installation height: 500 mm stroke: 300 mm Table width: 1250 mm Dkedpfxjuw S A Ds Akvsr Table depth: 800 mm mech. depth stop

Condition: refurbished (used), RETROFIT complete Pressing force: 1600 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm Ram: 750 x 450 mm Throat depth: 360 mm Downward speed: 200 mm Upward speed: 125 mm Machine height: approx. 3,500 mm Weight: approx. 7,000 kg Connection: 17 kW - a complete retrofit kit for unrestricted manual loading and unloading compliant with EC directives and CE equipment requirements, - new control cabinet with certified two-channel electronic PLC safety controller from Siemens (1512SP F or 1515F) for process control, featuring integrated control panel for the operating modes: setup with two-hand control, single stroke with two-hand control, and foot operation (only in combination with BWS); manual lever operation is no longer possible, - hydraulic safety block for monitoring the closing movement of the main cylinder, - position-monitored directional valve for the up and down movement of the ram of the main cylinder, - two-hand control device with two-channel monitoring of the two-hand synchronization at the press table (incl. 5m cable), - replacement of main and control pump motors, - replacement of seals on the main cylinder, - fine filter with contamination indicator, - the press is equipped with an electronic position measurement system (including teach-in function and display of the current ram position), eliminating the need for a mechanical cam switch. Dksdpfxsw S Uazo Akver Main control panel integrated into the control cabinet (mounted on the right side of the machine): - 12" touch panel - Control buttons and switches for operating modes and drives - USB interface for data exchange - Light curtain Option: Drawing cushion

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-980 SA Serial No. 15.207, Year of manufacture 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working container / gross volume max. 980 liters Usable volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Speed 1000 to 1700 rpm, stepless Motor power 22 kW Mains connection 400 volts, 50 Hz - Operating time adjustable manually and via timer - Stepless motor speed adjustment via DANFOSS drive controller, type VLT 3032 (frequency inverter) - Manually adjustable eccentric balance weights - Container with rubber lining - Sound-insulated cover with pneumatic cover opening - Manual separating flap - Integrated screen separation device after the separating flap - Liquid connection - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Partition cover with perforated screen - 1 crate of pyramid-shaped grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Dksdpfx Aksdzqn Dovjr Transport dimensions L x W x H 2300 x 3000 x 2550 mm Weight 2500 kg Good condition Functional description: Workpieces and grinding media are set in motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the grinding media causes deburring and surface finishing of the workpieces.

Condition: excellent (used), Year of construction: 1969, functionality: fully functional, pressing force: 160 t, stroke length: 650 mm, table width: 1,200 mm, table length: 800 mm, working height: 600 mm, Equipment: safety light barrier, Lasco TSP 160S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2019. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Lasco TSP 160S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2019. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply. Djdpfx Ajv E Rd Ejkvekr

Condition: used, Year of construction: 2008, Punching-shearing unit, complete Manufacturer: GEKA Year of manufacture: 2008 MODEL: ALPS-150 Production hours: 400 Application type: Shearing Machine type: Shearing machine Control unit brand: Fagor Technical specifications: General data Width: 2200 mm Depth: 1350 mm Height: 2400 mm Weight: 5000 kg Control unit Manufacturer: Fagor Model: CNC 8070 CNC main language: English CNC language customizable: Yes Main drive shear force 2500 kN Workpiece X : 15000 mm Workpiece Y: 160 mm Workpiece Z: 200 mm Max. table load: 400 kg Max. material thickness: steel 16 mm Electronic main connection 50 hz/3P Additional equipment: 3xloading table 3xside loading table 3xunloading table This GEKA ALPS-150 was manufactured in Spain in 2008 and has been in production for 400 hours. Dkedpfxoudbzye Akver production hours. This machine is a complete automatic solution for punching, marking and shearing angles for medium and large steel profiles. With few working hours this machine is in perfect condition.