Used Demag Ac 100 for sale (515)

Condition: used, E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4 Dcsdsv Daqropfx Ab Ter Factory no.: 63207040 Year of manufacture: 1993 Load capacity 1000 kg Hook path 2.6 meters Distance from suspension to load hook 450 mm Main lifting speed 4 m/min. Fine lifting speed 1 m/min. Cable length of control box approx. 1.7 meters Mains connection 400 volts, 50 Hz. 2 load strands = 1000 kg - Emergency stop Weight 46 kg good condition

Condition: ready for operation (used), Year of construction: 1999, operating hours: 12,396 h, Clamping Unit Clamping force 4200 kN Injection Unit Djdpfx Abexuazzs Tecr Screw diameter 70 mm This DEMAG Ergotech 4200-2300 was manufactured in 1998. It is a hydraulic injection moulding machine featuring a clamping force of 4200 Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 4200-2300 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2007, clamping force: 420 kN, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, overall weight: 20,000 kg, load hours: 53,000 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Dodjxr N Urepfx Ab Tecr

Year of construction: 2002, condition: good (used), machine/vehicle number: HHNRW, Demag / CTI monorail with 7 Demag DH hoists (ladle transport system of an aluminum foundry) Payload / lifting load 6300 -7000 kg / 6.3 + 7 tons approx. 100m runway beam (CTI profile - kit system) without hall constructions ff. 9 pneumatic switches, bends, various distributors + control cabinets + pneumatic controls Documentation including circuit diagrams and test books are available Hoists can be moved individually on the rail system, each hoist has its own control, including busbar system to supply the hoists Can be moved completely in two stages - fine stroke! Used condition - system was serviced / overhauled in 2018 for 155000 euros (rails / hoists) Dcedpeh Ad Sasfx Ab Tjr Plant is dismantled and immediately available (scope of delivery approx. 20-25to approx. 2 truck loads) More pictures upon request. Shipping by courier possible, collection preferred Freight costs within a radius of 500 km 1400 euros. Please inquire about the exact costs according to your zip code!

Condition: new, functionality: fully functional, Rope guide for DEMAG DH left 5-6/14 left 1/7.5 left 3-4/11 right 5-6/11.3 left 10/20 left 20/25 Many more motors KBH / KBF / KBV / K-Motor, spare parts, brakes, and much more available on request. Invoice including VAT. Djdpfxjxu Di Ao Ab Tocr

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, opening stroke: 2,900 mm, tool height: 1,400 mm, TECHNICAL DETAILS Clamping force: 15,000 kN Platen dimensions (H x V): 2,150 x 1,880 mm Tie bar spacing (H x V): 1,500 x 1,250 mm Min. mold height: 700 mm Max. mold height: 1,400 mm Max. opening stroke: 2,900 mm Screw diameter: 145 mm Shot volume: 10,981 cm³ Shot weight (PS): 9,880 g Injection pressure: 1,454 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 14,400 x 3,400 x 2,900 mm Net weight (incl. control cabinet): 74,000 + 21,000 kg Electrical & hydraulic equipment Rated power of pump motor: 165 kW Heating capacity: 97 kW EQUIPMENT Wittmann W 753 robot (year of manufacture: 2008) Safety enclosure Conveyor belt Service history notes: 2010: New screw with RSP and barrel 2015: New IBED 2015: New wiring panel 2017: New motor and 2nd pump 2017: New injection side cylinder piston BS with seals 2017: Replacement of oil cooler circulation pump Djdpexup T Hsfx Ab Tscr 2017: Replacement of teach box (robot) 2018: Replacement of pumps P1 + P3 (at 65,800 operating hours) 2018: Replacement of hydraulic oil

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 878 40013, clamping force: 2,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Dodpfxsxtmp Ns Ab Tjcr

Condition: ready for operation (used), Year of construction: 2017, operating hours: 42,177 h, General Data Measurements width 2300 mm Dcsdpfx Aoxqh U Iob Tor Measurements depth 9700 mm Measurements height 290 mm Machine weight 4052 kg Injection Unit Screw diameter 70 mm Clamping Unit Clamping force 5800 kN This SUMITOMO SHI DEMAG El-Exis SP 580/1020-3000 was manufactured in 2017. A robust electrical injection moulding machine featuring a screw diameter of 70 mm, clamping force of 5,800 kN, and tiebar spacing of 1,020 mm. With 42,177 operating hours and 48,627,617 cycles, it's a proven performer. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 580/1020-3000 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2003, condition: ready for operation (used), Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) Engel ES 500/100 HLS, year of manufacture: 1998, operating hours: approx. 103000h. On-site inspection possible. Sale of individual machines possible. Djdpfxjxrf Nro Ab Tscr

Condition: used, Year of construction: 2010, clamping force: 500 kN, displacement volume: 1,779 cm³, injection pressure: 1,855 bar, overall weight: 24,500 kg, load hours: 15,000 h, screw conveyor diameter: 80 mm, terms of delivery: EXW (ex Works) Dedpfsxluk Esx Ab Tecr delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2007, Injection moulding machine Sumitomo Demag IntElect 150/520-610, year of manufacture 2007 (without the shown handling unit / temperature control equipment / material supply [hopper, loader]). Dcsdew E N S Tepfx Ab Tjr Designation SGM Operating hours Cycle counter Cylinder heating Electric drives Sumitomo Demag IntElect 150/520-610 29,125 26,530 3,562,329 - Sumitomo Demag IntElect 150/520-610, year of manufacture 2007: 5348 x 1468 x 2400 mm (LxWxH), net weight 7,400 kg. Demag 150: Screw diameter Ø 45 mm.

Condition: excellent (used), contactor control Dedpof Ey Edofx Ab Tecr Polu Box Make DEMAG with documents

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 879 1 0052, clamping force: 3,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Dcjdpfx Absxtmpve Tor

Condition: ready for operation (used), Year of construction: 2017, operating hours: 62,073 h, General Data Measurements width 2200 mm Measurements depth 8500 mm Measurements height 2800 mm Machine weight 2759 kg Injection Unit Screw diameter 70 mm Clamping Unit Clamping force 4500 kN This SUMITOMO SHI DEMAG El-Exis SP 450/920-2500 was manufactured in 2017. A robust electrical injection moulding machine, it features a screw diameter of 70 mm, a clamping force of 4,500 kN, and tiebar spacing of 920 mm. Despite its extensive use, it remains operational but requires attention due to a knee lever issue. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 450/920-2500 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding Dedoxqh Uzspfx Ab Tscr

Condition: used, Year of construction: 1991, operating hours: 35,498 h, functionality: fully functional, Equipment: documentation/manual, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume (70mm): 960 cm³ / 860 g Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2x Air valve: 1x Robot interface Equipment 2-circuit core pull / 2-circuit robot interface 5/2 air valve No.1 on moving platen Clamping force control Handling interface, Euromap 12 (32-pin) robot interface Tool protection interface (ejector plate safety) Integrated hot runner control, 2 zones Mould protection Electrical plug combination Dcodpfexk Tk Iox Ab Tsr

Condition: used, Year of construction: 2017, clamping force: 480 kN, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, overall weight: 20,500 kg, load hours: 12,000 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) Dedpfxjxlukxj Ab Tocr delivery time: on request terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2017, operating hours: 62,311 h, General Data Measurements width 18000 mm Measurements depth 7000 mm Measurements height 2500 mm Injection Unit Dedpfx Aboxqiafe Tscr Screw diameter 45 mm Clamping Unit Clamping force 3000 kN This SUMITOMO SHI DEMAG El-Exis SP 300/720-920 was manufactured in 2017. A robust electrical injection moulding machine, it features a screw diameter of 45 mm, a clamping force of 3,000 kN, and tiebar spacing of 720 mm. With 62,311 operating hours and 50,971,553 cycles, consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 300/720-920 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2007, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, load hours: 67,000 h, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Dedpfxjwz R Ius Ab Tecr Delivery time: by arrangement Freight basis: ex-works

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), General Data Dcodpfx Abjxp Snpj Ter Measurements width 1920 cm Measurements depth 7750 cm Measurements height 2410 cm Machine weight 25340 kg This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2007, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, load hours: 67,000 h, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Dodpfxjwlkcaj Ab Tecr Payment terms: 100% before takeover of the machine, net

Year of construction: 2019, operating hours: 17,716 h, condition: ready for operation (used), General Data Measurements width 1920 cm Measurements depth 7750 cm Measurements height 2410 Machine weight 26210 kg This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information. Dodpfx Aboxp Sn Ao Tjcr Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, Injection Unit Screw diameter 80 mm Shot weight 1212 cm³ Stroke volume 1212 cm³ Injection pressure 1877 bars Clamping Unit Clamping force 420 kN Ejector stroke 230 mm Dsdpfx Aboxpyt Hj Tocr Additional Equipment SEPRO Robot Included This DEMAG Ergotech System 420-1450 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech System 420-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. Application Types Dcedexpkuzepfx Ab Ter Injection Moulding

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 1900 mm Measurements depth 6600 mm Measurements height 2400 mm Machine weight 14900 kg Injection Unit Screw diameter 50 mm Shot weight 482 g Stroke volume 530 cm3 Dcsdpfexnd Sqox Ab Tjr Injection pressure 2426 bar Adjustable heating zones 5 Nozzle pressure 110 kN Clamping Unit Clamping force 2500 kN Opening stroke 670 mm Max open daylight 1380 mm Mould height min 330 mm Mould height max 710 mm Ejector stroke 200 mm Ejector force for / back 81 kN Media Pump drive power 30 kW Oil tank 550 L This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Dcjdpfxoxmbv Do Ab Ter Injection Moulding