Used Demag Ac 100 for sale (509)

Condition: used, functionality: fully functional, Year of construction: 1986, machine/vehicle number: ROD372, Technical data: 1x Demag KBK 2 pillar jib crane SWL 1000kg with chain hoist Capacity at full outreach: 1000kg / 1 ton SWL Height: approx. 4.05m Underside of jib: approx. 3.15m Outreach: 5m Hook height: approx. 2.55m Total weight: approx. 950kg With Demag PK chain hoist 1000kg Incl. pins, cable trolley, travel mechanism, end cap, etc. Slew range 300°, connection 400V 16A Crane is dismantled and available immediately Item location: 75053 Gondelsheim Further cranes available, capacity 80–5000kg, please inquire See pictures Hnodpfx Aoxmutpohvji Dispatch by freight forwarder or collection by appointment only

Condition: used, Column-Mounted Crane DEMAG type PK1 N-F Capacity: 125 kg Arm travel: 3500 mm Height under hook: 2200 mm Total column height: 3150 mm Height under arm: 2700 mm With electric hoist Chain exit: length 2100 mm Hjdpjxpubxsfx Ahvoni In good condition Voltage: 380 V Weight: approx 250 kg

Condition: excellent (used), functionality: fully functional, DEMAG P1000 H40 2x casings 2x cable drums Hnsdpsv Uacvsfx Ahvji 2x gearboxes 2x cable guides all in excellent used condition

Condition: excellent (used), functionality: fully functional, GEARBOX SET Part Number 82452533 DH1000 3ST (3-stage) i=112.3 4 DEMAG DH1000 gearboxes, excellent condition, like new RRP per unit: €21,902.00 net, only €6,900.00 net each when purchasing 4 units, individual purchase €7,990.00 net 4 DEMAG DH1000 plug-in shafts, new RRP per unit: €1,700.00 net, only €990.00 net each for purchase of 4, individual purchase €1,290.00 net Hsdpfsv T Ti Tex Ahvoni Thousands of DEMAG spare parts in stock Free shipping within Germany! Info! Over 30,000 DEMAG spare parts and components in stock! DEMAG crane parts warehouse

Condition: like new (used), functionality: fully functional, Demag drive Gearbox type: D08 i=3.24 (output shaft diameter 50mm, length 110mm) Motor type: KBA100 A -12/2 ED = 15/40% Hedpfx Ajvrzwcohveni 0.21 / 2.2kW 400V 50Hz Condition: As good as new

Year of construction: 2024, condition: reconditioned (used), functionality: fully functional, Demag / Hoist motors / Gearboxes / Drums / Casings / Creepspeed units / Driveshafts / Clutches P200 20/10 P-4 P400 24/10 K4P P400/ P600 24/14 K4P P1000 / P1200 28/12 K4P & 28/17 K4P P1600 / P2000 36/24 K6P Gearboxes 8 m/min ,10 m/min, 12 m/min /15 m/min Creepspeed units FG20 / FG24 / FG28 / FG36 Hedpfxeuhnzzo Ahvoni Price on request

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 6 Hnodpfxjxzqtzo Ahvji -Connector: 16-core cable -Transport dimensions: 840/300/H120 mm -Weight: 4.7 kg

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 6 Hedpfoxzqkyex Ahvoni -Connector: 16-pin -Transport dimensions: 640/430/H120 mm -Weight: 5.6 kg

Condition: good (used), Crane block, crane hook, load hook, single hook, bottom block -Cover: Lid for crane bottle 2 pieces / = 1 set -Type: unfortunately without type designation -Bore: Ø 55 mm Hsdpfx Aoxd Thaohveni -Transport dimensions: 350/350/H60 mm -Weight: 5.6 kg

Condition: good (used), Year of construction: 2014, Manufacturer: DEMAG Load capacity: 860 kg + 630 kg (equipped with two cranes) Hnodpfx Aeyu R Dzohvsi Exact technical dimensions are shown in the pictures. The crane runway can be extended using the structures and supports shown in the pictures; however, additional track elements are required for the extension, which are not available!!

Condition: used, Technical details: lifting capacity: 1,25 t lift: 4000 mm span width: 3000 mm pivoting angle: ca. 300 Grad total column height: 4020 mm stroke speeds: 8/2 m/min travel of hook: 4000 mm column diameter: 160 mm weight: 164 Kg dimensions L x W x H: liegend 4,2 x 3,5 x 0,2 m Column-mounted slewing crane with small foot flange octagonal 750 x 750 x 21mm Hodpfxoyuyias Ahveni - operation floor-operated pendant control - slewing electric/motor driven - jib LxWxH: 4100 x 125 x 300mm The crane is equipped with a new electric chain hoist STAR LIFTKET 1,0 to with electric trolley. Type 1000/2-4/1 Design 1000/2-4/1; lifting height 4.0m, lifting speed 4/1 m/min. Function: electric driving on carrier, up and down, as well as swiveling. without clamping plate! *

Year of construction: 1995, condition: good (used), DEMAG Electric Hoist DKUN 5-500-K-V1F4 Type: Electric chain hoist Hsdpfx Aeudv Tkshvoni Year: 1995 Chain: 3 meters Three-phase 380V Capacity: 1.000Kg 2 speeds (12,5m/min. - 6,2m/min.) 1.7Kw

Condition: good (used), Year of construction: 2011, functionality: fully functional, travel distance Z-axis: 1,500 mm, Equipment: documentation/manual, Number of axis: 3 Reach: 1500 mm Payload: 5 kg Hnedpfoyfhw Hex Ahvoi X=420mm Y=1200mm Z=1500mm c= 0-90 pneumatic

Condition: excellent (used), DEMAG / ABB / TELEMECANIQUE – Frequency Converters / Inverters – 11 units: 1. DEMAG Type - ACS800 04M-0140-3+D150+E210+H355+H356+H360 with resistance unit (new) – 1 unit. 2. DEMAG Type - ACS800 04M-0210-3+D150+E210+H355+H362+N672 Hedpfxjyu S Als Ahvjni with resistance unit (used) – 1 unit. 3. DEMAG Type - UD DPU415V024E10 – 1 unit. 4. TELEMECANIQUE Type - ATV 58ED23N4 – 15 kW (in original packaging). 5. DEMAG Type: ABB – ACS 800 – 2 units. 6. DEMAG Type: ABB – ACS 800 – 1 unit. 7. VACON / AC DRIVE – 3 units. 1. VACON Type: X4K40400C 2. VACON Type: XX4K440075C 3. AC DRIVE Type: X4K40075C1 8. AC DRIVE Type: X4 – 1 unit.

Condition: excellent (used), 1. DEMAG gearboxes / crane gearboxes – 10 units. Type: AFM 06 – 1 unit Type: AFM 05 – 1 unit Type: AFM 04 – 1 unit (3 units available). Type: AFM 04 – 1 unit Hjdpfx Ahsyu Sbueveni Type: ADE 50 DD – 1 unit Type: Bevel gearbox AFW 08 – 1 unit Type: WUK 60 TD – 1 unit Type: P 208 – 1 unit

Condition: excellent (used), functionality: fully functional, Year of construction: 1986, machine/vehicle number: MIKA-CN, Technical specifications: 1x Demag KBK 1 pillar jib crane, rated load 125 kg with Demag DC chain hoist (125 kg - year 2007) Load capacity at full outreach: 125 kg Height: approx. 3.05 m Underside of jib: approx. 2.55 m Outreach: 3 m Hook height: approx. 2.15 m Total weight: approx. 300 kg Equipped with 125 kg Demag DC chain hoist Including pin, cable drag chain, trolley, end cap, etc. Slewing range 300°, connection to 400V 16A Crane is dismantled and available immediately Hsdpfx Ahoyu E I Ijvjni Item location: 75053 Gondelsheim Additional cranes with load capacities from 80–5000 kg available, please enquire See photos Shipping via freight forwarder or collection by appointment only

Condition: new, Radio remote control / joystick transmitter / transmitter / receiver: 1. Radio remote control / joystick transmitter / transmitter Type: DRC - JD2 with 4 batteries (new). Hjdpfx Ahoyuy S Ujvsni 2. Transmitter type: DRC - 10 2ST D3 - 2 units (new). 3. Receiver type: DRC - MP D3 (new). 4. Circuit board type: DRC - DR D3 (new). 5. Electrical enclosure with receiver type: HBC FSE516 6. Receiver type: RC - E10 7. Radio remote control / joystick transmitter / transmitter - 2 units: Type: FSS760 - 40 Type: 716 - K 12973 8. Radio remote control / joystick transmitter / transmitter - 2 units: Type: F24 - 60 TK 9. Radio remote control / joystick transmitter / transmitter - 2 units: Type: F25 - 6D

Condition: new, DEMAG control box / switch cabinet for hoist / wire rope hoist - DR / DMR / DH Hjdpoyut Aasfx Ahvsni 1. Demag control box DR / DMR with frequency inverter DIC - 4 - 007 - C - 0032 - 05 2. Demag control box / switch cabinet for DH hoist

Year of construction: 2019, operating hours: 17,716 h, condition: ready for operation (used), General Data Measurements width 1920 cm Hnodox D Nx Iopfx Ahvoi Measurements depth 7750 cm Machine weight 26210 kg Measurements height 2410 mm This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2013, operating hours: 27,551 h, clamping force: 2,200 kN, total height: 2,100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 22 Machine Benefits Technical Machine Benefits • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / maximum shot volume: 329 cm³ / maximum shot weight: 293 g / injection rate without accumulator: 254 cm³/s • Dosing stroke: 207 mm / maximum nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kn / number of heating zones: 4 / hopper capacity: 50 l / maximum injection speed: 160 mm/s • Holding force: 2420 kn / maximum opening stroke: 550 mm / minimum mold height: 300 mm / maximum mold height: 580 mm / maximum platen distance: 1130 mm • Mold clamping plates (hxv): 880x830 mm / clearance between tie bars (hxv): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kn • Dry cycle time according to euromap 6 (stroke): 427 mm Hsdpfex D Hnyex Ahvsni • Net weight without oil: 10100 kg Dimensions Machine Depth 6460 mm

Condition: ready for operation (used), Year of construction: 2003, operating hours: 96,986 h, clamping force: 600 kN, screw diameter: 30 mm, This DEMAG ET60-200 concept hydraulic injection moulding machine was manufactured in 2003. It features a clamping force of 600 kN and a maximum mold weight of 580 kg. The machine includes a robust injection unit with a screw diameter of 30 mm and an injection pressure of 1900 bar. Consider the opportunity to buy this DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Tie bar spacing (H x V): 420 x 420 mm • Platen dimensions (H x V): 530 x 540 mm • Min. mold installation height: 210 mm • Opening stroke: 400 mm • Max. mold weight: 580 kg (moving side 380 kg / fixed side 200 kg) • Ejector: • Stroke: 125 mm • Force: 41 kN • Retraction force: 15 kN • Pneumatic ejector: Yes • Core pull control: Yes (2 units, on the ejector side/AS) • Injection unit 1: • Unit size: 200 • Screw diameter: 30 mm • Injection pressure: 1900 bar • Stroke volume: 106 ccm • Shot weight (PS): 94 g • Screw L/D: 20 • Nozzle radius: 15 mm Hnedpfxjyg Nfue Ahvsi • Armored/wear-resistant injection unit: Yes • Process control: SPC (Yes) • Note: Maximum crane load warning: 2 metric tons Additional equipment • Robot/removal device: W621-1381 • Travel paths: Y 1200 mm, X 550 mm, Z 1500 mm • Hot runner controller: 7-zone integrated control • Mold sensors: Kistler (p=1/t=0)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, screw diameter: 45 mm, total height: 2,213 mm, overall weight: 15,750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Additional equipment • Fanuc Robot Machine Benefits Qualitative Machine Benefits • Process data acquisition, mould protection Technical Machine Benefits • Mould height min: 350 mm / mould height max: 745 mm • Main electronic connection: 3/400 v 50hz • Programmable sequence, highly dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Extra Information Standard equipment: Support of the moving mould mounting platen via linear guides/ Ejector short / long stroke/ Interface for external printer (hardcopy)/ Individual axis movement optimization (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Pump drive power II, increased (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Mains connections drive / heating separate/ Data display coloured/ Oil cooler reinforced (cooling water supply up to 35 °C)/ Water connection for mould and machine cooling separate/ Basic version Europe/ Corrosion protection/ Paint finish: Deep black (RAL9005): Machine bed with internals, lower switch cabinet/ Signal white (RAL9003): Clamping unit, injection unit, nozzle guard/ Signal white (RAL9003): Fixed safety devices, upper switch cabinet/ Hodpfx Aox D Hntohvsni Signal white (RAL9003): Safety doors/ Textured surfaces: Elastic machine bearings/ Digital and wear-free position measuring system (ultrasound/high-resolution rotary encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (according to EUROMAP March '96)/ Centring diameter fixed platen: 160 mm/ Centring diameter moving platen: 160 mm/ Without side ejector plate/ Standard mold installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety gate is closed)/ Ejector with position control (p/F+v independently programmable, parallel to mold movement)/ Toggle lever oil lubrication/ Injection unit/ Optional equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for ultra-fine filtering in the bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), can be disconnected via main switch/ Socket IECEE 3Ph / 400V-16A, can be switched off via main switch/ Flashing light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on movable tool plate (programmable)/ 6 pneumatic 5/2-way valves on fixed tool plate (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with non-return valves)/ Manual pressure relief for core pull 1-circuit/ Protective clothing on operator side widened (250 mm)/ Hot runner control 12 zones, integrated (2, 75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/ Holding pressure switchover dependent on hydraulic pressure (with pressure recording)/ Nozzle contact pressure when mold is open (programmable)/

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. • The dosing unit (orange part) is not included. • Integrated socket combination, country-specific, • can be switched off via main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current device • Pneumatic 5/2 valve No. 1 on movable mold clamping plate; • programmable, supplied via central air connection • includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point outside the control cabinet • Interface for additional nozzle heating band; socket only Hsdpfx Ahex D Nlusvsni • 2-circuit core puller via switching valve on movable mold clamping plate; Q-independent (programmable); • With pilot-operated check valves to prevent core creep • Mold connection dimensions E (similar to Euromap March 96) • With side ejector plate, centering diameter of fixed platen: 160 mm • Centering diameter of movable platen: • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. • 5x similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mold and oil cooling • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis Hsdpfx Aex D Rqrohveni • Reduced centering diameter (D=100/125) for fixed mold platen • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled

Condition: ready for operation (used), Year of construction: 2013, operating hours: 17,577 h, clamping force: 1,600 kN, total height: 2,060 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 11 Machine Benefits Technical Machine Benefits • Clamping unit: 160 / locking force: 1760 kn / opening stroke max: 495 mm / mould installation height, min: 275 mm / mould installation height, max: 585 mm • Platen distance, max: 1080 mm / mould mounting platens (h x v): 760 x 785 mm / clear column distance (h x v): 520 x 520 mm • Ejector travel: 125 mm / ejector force: 35 kn • Injection unit: 340 / screw diameter: 35 mm / l/d ratio: 20 / injection flow (ps) without accumulator: 288 cm³/s • Metering stroke: 162 mm / nozzle stroke, max: 350 mm / nozzle immersion depth (svo): 20 mm / nozzle contact pressure: 30 kn • Material hopper capacity: 35 l / injection speed, max. , standard: 300 mm/s / injection speed, max. , increased: 500 mm/s • Net weight without oil filling: 7300 kg Extra Information Electrical & Pneumatic Interfaces: Sockets: 2 x Schuko (1Ph, 230V, 10A)/ 2 x IECEE (3Ph, 400V, 16A) – switched off via main switch/ Additional Schuko socket also listed (same rating)/ Valves: 1 x Pneumatic 5/2 valve on movable platen (programmable)/ 2 x Pneumatic 5/2 valves on stationary platen (programmable)/ I/O: 3 digital inputs / 3 digital outputs (freely programmable)/ Terminal board outside control cabinet/ Air & Cooling: Central air supply and piping/ Cooling system: open cycle/ Cooling water controller: 4 circuits with temperature indication (max. 10 l/min per circuit)/ Separate water connection for cooling (mould + machine)/ Switch-off for mould cooling (time programmable)/ Machine Mechanical & Motion Features: Clamp and injection unit colours: Jet black (RAL9005): bed, pump station, lower control cabinet/ Signal white (RAL9003): clamp unit, injection unit, guards, covers, safety doors/ Mould platen layout: E-standard (similar to EUROMAP, March 1996)/ No side ejector platen/ Ejector: held in front position against spring-loaded mold ejector/ Standard mold height/ Standard closing speed/ Hnedox D Hnmspfx Ahvoi Only active movement when safety guard is closed/ Screw: wear-resistant, nitrided barrel, standard L:D, 35 mm diameter/ Non-return valve: 3-piece ring type/ Control, Programming & Monitoring: Inputs/outputs and clamp sequence: freely programmable/ Switching programs (e.g., dry cycle, startup scrap counter, timer-controlled cooling)/ Injection process: Injection force with max injection speed: 200 mm/s/ Back pressure programmable via 6-point polygon/ Follow-up pressure switch-over based on melt pressure/ Follow-up, back pressure, metering: closed-loop control/ Feed throat temp control: closed-loop, max 90°C ±9°C/ Reduced nozzle sealing force (programmable)/ Clamp force: closed-loop control/ Active mold protection: sensor-based during closing/ Hot runner control: 5 zones integrated (2.75 kW total) Display, Software & Data: Coloured data display PDA (Process Data Acquisition): 100% control with graphical parameter recording/ Overlaid graphs for multiple cycles/ External statistical data export/