Used Deco 13 for sale (32,512)

Condition: excellent (used), functionality: fully functional, Single-sided edge processing line HOMAG with feed speed up to 32 m/min, precise workpiece positioning with rolling block chain (instead of standard chain), enhanced mechanization, fully automatic workpiece infeed WZ14, with belt sanding unit for solid wood edges. Includes: Edge banding and sizing machine HOMAG, type: PROFI KFL350/13/A3/WZ Loading station / feed table HOMAG POWER TBL100/30/30/S Return system / BOOMERANG LIGMATECH, type: ZHR 30/L/185/F Kodpswvlhlefx Afiodu Edge bonding with PUR and EVA adhesives.

Condition: used, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Eurotherm, servo motor type ACM2n 0220-4/1-3 -Speed: 4000 rpm -Torque: 2.2Nm -Shaft: Ø 14 x 30 mm -Protection class: IP54 Kdodpfoh Hbxuex Afiju -Dimensions: 200/88/H120 mm -Weight: 4.2 kg

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, Feutron climate chamber Type: 3703/13 Hum: 70% Year of construction 2012 See more information in the attachments Door is damaged (paint damage) Kedpfx Afevwm Nuoiodu

Condition: used, machine/vehicle number: 2520, round bar steel:42 mm square edge steel:38 mm Kdedpfx Ascxxrpsfiju L-beam:90° 110x10 mm flat steel:150 x 16 mm blade length:250 mm notching deepth up to:12 mm notching: l + T material:80 x 10 mm hole punhing press: pressure:50 t stroke:27 mm hole punching press: capacity (dia. x thick.):25 x 16 / 20 x 19 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:1,6 x 0,85 x 1,8 m

Condition: good (used), Year of construction: 2019, operating hours: 270 h, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, total height: 88 mm, total length: 600 mm, input voltage: 360 V, well-preserved electro-permanent magnet clamping plate from Wagner incl. cable without control unit pole pitch 13mm Ksdewp D I Depfx Afiodu

Condition: excellent (used), Self-loading press for gluing Orma LS/ECO/CA 30/13 Working length 3000mm Working width 1300mm Automatic material loading Kdodpfx Aev Nhx Usfisu Glue application system Shelves heated with oil to 130C Top pressure force 57t Side pressure force 9t Year of production 2001 CE certificate

Condition: new, sheet thickness: 13bending length: 4100upper roll diameter: 360 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Kdodpjd Ab Ruofx Afisu Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 12.516,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: used, Friction wheel, impeller, bridge crane, indoor crane, assembly crane, workstation crane -Friction wheel drive for: Demag crane -with: pantograph -with: control switch Kdsdpfjc Rwcxjx Afisu -Dimensions: 660/330/H340 mm -Weight: 41 kg

Condition: good (used), Peddinghaus Combined Section Steel Shear Type 210/ 13 See condition Kdsdpfsv D Nzysx Afiou

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 3,740 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 300 mm, TECHNICAL DETAILS Number of axes: 4 processing axes + A-axis Spindle power: 15 kW Model: HSK F63 Working surface Kjdpfx Aevwatyofiedu In X (single processing, workpiece length): 3,740 mm In X (pendulum processing, workpiece length): 1,830 mm In Y (workpiece width): 1,550 mm In Z (workpiece thickness): 300 mm Work tables: Double Use of tables: simultaneous or alternating Feeding system Model: HOMAG OPTIMAT TBP 370 gantry loader Type of feeding: Automatic panel feeding through spreader beam Usable dimensions: Panel width: 400 - 1,600 mm Panel length: 400 - 2,000 mm Panel thickness: 16 - 36 mm Maximum panel weight: 60 kg Drilling group Total number of spindles: 16 Number of vertical spindles: 12 Number of horizontal spindles: 2 + 2 Tool magazine Turret: 12 positions

Year of construction: 1990, condition: excellent (used), I sell the turning device HOMAG TD31/25/13. Year 1990. One side feeding suitable for line. Element width 1250 + 1250mm Kedpjktfvfsfx Afiedu Total length 6500mm Available immediately. Ready for work, possible to test. With full manuals.

Condition: excellent (used), Year of construction: 2022, High frequency panel Press Orma Model LS ECO 25/13 Year of production: 2022 Technical condition: very good Manufacturer: Orma Macchine – Italy Work Table and Feed System: • Work dimensions: 2500x1300 mm, 3.25 m² • Mechanical pusher: length 2500 mm, used for advancing pieces into the press; fixed pushing speed; pushing bars operated by a chain system • Limit switch for stopping the press at the end of the work table • 1 foot pedal for moving pieces on the work table • 1 emergency stop button _____ Hydraulic Press Model LS/ECO: • High-frequency platens, dimensions: 2500x1300 mm • Mobile lower platen • Vertical pressing system: Kdedpfx Afev Ayfteiju o 4 vertical pressing pistons with a diameter of 70 mm, maximum total force of 40 tons, stroke/opening: 150 mm • Horizontal pressing unit: o Consists of 5 double-acting pistons with a diameter of 40/25 mm that operate 5 steel pressing plates; stroke/opening: 150 mm o Maximum total force: 7.5 tons o Pistons can be activated via a special device to reduce the pressing area • Rear vertical pressing unit: o Used to fix the last pieces and contrast the lateral horizontal pressing unit, consisting of a steel bar (2500x150 mm) o Actuated by 3 vertical pistons with a 70 mm diameter, total maximum force: 30 tons, stroke: 150 mm • Side pressing unit and rear clamping device: o Allows the production of pieces with unlimited length • Two working cycles: o Manual or automatic, selected by pressing a button o Special cycle for adjusting after pressing • Independent pressing units: o Each of the three hydraulic units has an independent pressure setting • Single hydraulic circuit: o Uses the same oil reservoir o Total power: 5 HP • Main control panel equipped with all command options (PLC included) for press operation • Press structure made of welded steel bars and profiles _____ Evacuation System: • Working dimensions: 2500x1300 mm • Mounted at the rear of the press on the mobile pressing unit • Gravity unloading system with triangular profile elements _____ INCLUDED: a. High-Frequency Generator • 20 kW high-frequency generator • Adjustable to five frequency positions, allowing the generator to be used based on the type of operation • Silicon diode bridge for constant efficiency • Fully equipped with all components for connection to the press • Press platens made of insulating materials, covered with aluminum plates to allow high-frequency transmission o Aluminum coating functions as positive and negative poles (upper and lower platen) b. Stainless steel platen coating c. Height adjustment for side steel pressing plates d. Additional thickness for the side pressing plates We offer professional dismantling, loading, installation, commissioning, and training on machine operation. We also provide ongoing maintenance services and access to spare parts.

Condition: new, bending length: 3100sheet thickness: 13upper roll diameter: 300 Technical specifications: - Hardened and polished rolls Kjdpfx Afsd Ab S Teiodu - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 9.400.00 We have many references!

Condition: excellent (used), Year of construction: 2013, CFT S.p.A. sorting and crushing line consisting of: - CFT S.p.A. receiving hopper with drum screen type: VASCA di LAVAGGIO con ELEVATORE model: L945 1/13 serial number: 24621 year of manufacture: 2013 plastic mesh belt with partitions belt width: 540 mm partition height: 30 mm distance between partitions: 200 mm lifting height: 1950 mm sieve: 1 mm overall dimensions: 3400 mm x 2950 mm x 1950 mm. - Conveyor belt, loading/inspection belt CFT S.p.A. inspection belt with work platform type NASTRO di CERNITA model L945-313 serial number 24622 year of manufacture 2013 plastic belt belt width 600 mm overall dimensions 4200 mm x 2800 mm x 1680 mm. - S/s tank with volume sensor - Lifting/loading/feeding belt with partitions CFT S.p.A. plastic belt with partitions belt width: 600 mm partition height: 120 mm distance between partitions: 700 mm lifting height: 3100 mm overall dimensions: 5000 mm x 1900 mm x 3900 mm. - CFT S.p.A. crusher with progressive discharge pump Type: TRITAGHIACCIO Model: CR 2 Serial number: 24602 Year of construction: 2013 Internal dimensions of hopper: 950 mm x 1000 mm x 900 mm Overall dimensions: 5800 mm x 2100 mm x 3500 mm Kdsdevq I Huspfx Afisu - Hopper/bunker/tank with volume sensor Dimensions: 1750 mm x 1600 mm x 1250 mm

Condition: used, functionality: fully functional, Agilent 1200 series G1160A 12/13 Sel Valve. Kodpfx Asuavnyofijdu The Agilent 1200 Series valves provide the user a comprehensive solutions for more flexibility through solvent selection and column selection. They offer new automation capabilities for sample preparation as well as higher sample throughput with alternating column regeneration. The Agilent 1200 Series valves are fully integrated in the CAN environment (control area network) of the Agilent 1200 Series LC system and can be controlled by the Agilent ChemStation Software. Liquid contacts: Stainless steel and PEEK Port size: Accepts 10-32 male threaded fittings Flow passage diameters: 1.0-mm (0.040”) Volume in flow passage: Stator (includes stator face seal) 6.4 µl/hole, rotor seal 4.0 µl/groov Maximum pressure: 21 MPa (207 bar, 3000 psi) Recommended flow range: 0.2 – 100 ml/min (at high pressures, after the pump) 0.2 – 10 ml/min (at low pressures, in front of the pump 2 for sale. 1 piece/890 EUR. Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 10,608 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, construction height: 2,800 mm, fork length: 1,300 mm, drive type: Diesel, Sideloader Mast type: Triplex Technical condition: good Kdsdpfxsu Ac Hqo Afieu

Year of construction: 1980, condition: used, machine/vehicle number: 30245035, The offer here is a double shear table. The machine dates back to 1980 and has a lifting capacity of 4,000 kg. The lifting table has a driven runway system and has the XYZ function (lifting, process, etc). The advantage of double scissors is that they can achieve a high operating stroke when space is limited. The dimension is 8. 20 m long and 1. 20 m wide. The conveyor belt has a width of 80 cm and 10 cm roll diameter. Ksdpfxogtmv Se Afisdu

Year of construction: 2023, condition: new, machine/vehicle number: MR005063, Maximum technology with limited space requirements. Four-axis CNC machine with bumper protection, to be used for panel machining and solid wood. Machine with industrial designed frame, heavy duty, maximum precision on operations. Equipped with Easy2Go modern interface.Machine is equipped with the following options: Kjdpfxeqw U D Rj Afisdu - Machine conforming to CE regulations - Automatic lubrication system - Suction hood main motor 3-position adjustable - Tool length control Technical specifications: - Maximum panel thickness : 180 mm - Maximum panel length : 3115 mm - Maximum panel width : 1320 mm - Machine table : Beams with vacuum cups - Safety system : Bumper protection - Number of drilling spindles vertical : 12 piece - Number of horizontal drilling spindles (over Y-axis) : 2 piece - Number of horizontal drilling spindles (over X-axis) : 4 piece - Power milling motor : 13 hp - Milling spindle change : HSK63F - Tool changer positions : 11 piece - Milling spindle speed : 24000 /min - Tool length measuring system : Yes - Serial number : AH00006001

Condition: new, sheet thickness: 13bending length: 2550upper roll diameter: 270sheet length: 2550 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.690,-- Kdodod Ab R Tepfx Afiju - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, Year of construction: 2024, overall weight: 300 kg, load capacity: 10 kg, arm reach: 1,300 mm, The BWCOR-09/13 is an innovative, programming-free welding robot arm that has been specially developed for modern automation. With this collaborative robot, you can rely on a future-oriented solution that impresses with its intuitive operation and does not require any complex programming. Equipped with a user-friendly 8-inch touchscreen teach panel and emergency stop functions, the BWCOR-09/13 enables quick and flexible set-up directly on site. Thanks to the sophisticated control technology and freedom of movement in 6 axes, precise weld seams can be created without the need for complicated programming. With a working radius of up to 1360 mm and a load capacity of up to 10 kg, the BWCOR-09/13 is ideal for demanding welding applications in a wide range of industries. The advanced safety architecture with emergency stop and collision detection ensures safe human-robot collaboration. Kdsdpfxou Db Nte Afiju Due to its compact design and flexible mounting system, the BWCOR-09/13 can be installed in various positions, including wall and overhead mounting, making it the perfect choice for confined or demanding work environments. In addition, the extensive hardware interfaces and EtherCAT compatibility enable seamless integration into existing production lines. Take your welding processes to the next level with the BWCOR-09/13 - efficient, safe and future-oriented.

Condition: new, sheet thickness: 13bending length: 2100upper roll diameter: 230 Technical specifications: - Hardened and polished rolls Kjdpfxsd Ab Scs Afijdu - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 5.560,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, bending length: 2600sheet thickness: 13upper roll diameter: 270sheet length: 2600 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls Kdjdpfx Aed Ab Tdsfisu - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 8.250.00 Side supports EURO 6.690.00 We have many references!

Condition: new, bending length: 2100sheet thickness: 13upper roll diameter: 230 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine Kdsdpfxjd Ab Tis Afiou - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 5.560,-- We have many references!

Condition: new, bending length: 4100sheet thickness: 13upper roll diameter: 360 Technical specifications: - Hardened and polished rolls Kjdpfx Afsd Ab Szjiedu - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 12.516,00 We have many references!

Condition: used, Technical details: Kdjdpjvgbdxefx Afiju bore capacity in steel (diameter): 13 mm throat: 160 mm bore stroke: 60 mm spindle taper MT: MK2 spindle speed:: 210 - 2580 / 16 step U/min feed: manual mm/U table clamping surface:: 200 x 185 (fest) mm Distance spindle/table max.: 620 mm table clamping surface:: 260 x 265 (verstellbar) Distance spindle/table max.: 160 - 460 mm table rotating: ja ° drill table adjustment: 300 (Handkurbel) mm column diameter: Ø ca. 70 mm total power requirement: 900 Watt weight of the machine ca.: 90 kg dimension machine xH: 0,6 x 0,31 x 1,7 m The machine is equipped with a RÖHM 1-13 drill chuck incl. drill chuck key. Spindle run right. Small vice included *