Used Deckel G1L for sale (710)

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg Rjdpfx Ahoyml U Sjvjp ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information Rodpsymln Sjfx Ahvop The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: excellent (used), Deckel FP 3 Milling Machine 3-axis digital readout FAGOR Innova 30i-M, new 500 mm 300 mm 380 mm Rsdpeymffkjfx Ahvep SK 40 drawbar thread S 20 x 2 Vertical milling head 40 – 2,000 rpm, 18 speeds Universal table 800 x 420 mm 12 mm approx. 1,500 kg approx. 1,400 x 1,800 x 1,900 mm Centralized manual lubrication Coolant system Operating manual Completely overhauled by Harich in 2000!

Condition: used, Year of construction: 1989, functionality: fully functional, travel distance X-axis: 490 mm, travel distance Y-axis: 290 mm, travel distance Z-axis: 390 mm, Technical Data: Main Drive: Pole-reversible three-phase brake motor with right/left rotation ..... .. 2.0/4.0 kW 21 programmable spindle speeds ..... 25 ... 2500 rpm Tool holder in retractable quill . . . . . . NK40 Redpfx Aoymc Upohvop Switch-operated tool clamp Feed Drive: Central DC motor with electromagnetic clutches ..... . ..... 1.4 kW (5Nm) Feed rate (programmable) ·· . . . . . . 5 ... 500 mm/min Feed correction ... ! . . ... . . . . . . from 20 to 120% Rapid traverse for X, Y, Z ..... ... . 1500 mm/min Travel range, motor/manual: X (longitudinal) . . . . . . . . . . . . . . . . . 490/500 mm Y (lateral) . . . . . . . . . . . . . . . . . . . . 290/300 mm Z (vertical) without bellows . . . . . . 390/400 mm with bellows . . . . . . . . . . . . . . . . . 345/355 mm + Vertical milling head on spindle carrier manually adjustable ..... ... ..... .. ... 200 mm Machine dimensions (min.) Length/Width/Height ..... . 1420x1290x1870 mm (see also foundation plan) Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and expert installation – all from a single source. Billing based on individual conditions and contract term. Contact us for your personal offer.

Condition: used, Year of construction: 1994, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, quill stroke: 80 mm, rapid traverse X-axis: 6 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, workpiece weight (max.): 6 kg, Tool holder: 40 Magazine positions: 20 Machine weight: 3,200 kg Dimensions: Length: 2,740 mm Width: 2,660 mm Height: 2,140 mm Rodeymc T Espfx Ahvep Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Disassembly, transport, and expert installation – all from one source. Billing according to individual terms and duration. Contact us for your personal offer.

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar • Documentation: instruction manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 L • Measuring probe • Chip conveyor • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Rsdpfx Ahjymcvmovjp Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling Redpfx Ahow A Apyevsp - Several fixtures and clamping devices/milling cutters - Operating instructions

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters Redpfxsw A Ap Hj Ahvjp - Operating instructions

Condition: used, 1 used engraving cutter grinder Manufacturer: Deckel Model: SOE with optics Year of manufacture: 1988 Technical specifications: Motor speed: 2800 rpm Grinding spindle speed: 4500 rpm Rsdpfxsyl Iipj Ahvop Drive power: 0.55 kW / 380 Volt Weight approx. 200 kg Accessories and equipment: Collets Optical system Machine base / pedestal Tools

Condition: used, x-travel 630 mm y-travel 500 mm Rodpfx Aheynnuqjvop z-travel 500 mm weight of the machine ca. 4500 kg

Condition: excellent (used), Year of construction: 2002, operating hours: 46,259 h, functionality: fully functional, machine/vehicle number: 11210001263, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 10,000 rpm, Control: Heidenhein Mill plus Clamping Table 1000 x 800 mm Rodpfx Asxzddtehvep Taper HSK 100 Toolchanger 120 position Exchange of tables : 2 tables Coolant tank: 2000l Machine is in running condition, machine has spindle coolig

Condition: used, Universal swivel, tilting, and rotary table DECKEL Universal add-on table for tool milling machines suitable for FP 2L, FP 3L, or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with scale - Can be tilted to/from the machine +/- 15 degrees - Swivel range +/- 15 degrees Redpfx Ahed E A I Nsvep - Swivel table, tilting table, angle table Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Rodpjvt D D Usfx Ahvjp Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine no.: 52185 Year of manufacture: 1968 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 250 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-switchable Mains connection: 380 Volt, 50 Hz - Feed on X and Z axes Rsdpfx Ahedzqb Sovop - Two motor speeds and 8 gearbox speeds - Quill stroke on vertical milling head: 60 mm - Fixed angle table - Coolant system in the machine base - Free-standing control cabinet - Counter support with counter bearing for horizontal milling SK 40 Required space (L x W x H): 1200 x 1100 x 1600 mm Weight: approx. 1000 kg Very good condition

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 28317 Year of construction approx. 1960 Rodpfeiy Ekvex Ahvjp travel X: 245 mm Y: 150 mm Z: 340 mm table size 600 x 210 mm spindle admission horizontal MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 0,8 and 1,1 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - Pinol shift at vertical milling head 60 mm - vertical milling head +/- 90° tiltable - Metal base made of angle iron with machine feet space requirement L x W x H 1100 x 900 x 1650 mm weight 650 kg good condition

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine No. 33064 Year of manufacture approx. 1960, overhauled in 2012 Rjdpfedzp T Eox Ahvjp Travel X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: MK 4 - S20 x 2 Vertical spindle speed: 95–1900 rpm, 12 steps Horizontal spindle speed: 60–1200 rpm, 12 steps Motor power: 1.1 and 1.4 kW Power supply: 380 Volt, 50 Hz - Feed on X and Y axes - Quill adjustment on the vertical milling head - Fixed angle table - Coolant system with mechanical pump in the machine base - Separate control cabinet with cable connector Space requirement L x W x H: 1100 x 900 x 1600 mm Weight: approx. 900 kg Good condition Machine was overhauled in 2012

Condition: good (used), Deckel CNC tool milling machine Control Dimensions & weight: Rsdpfxjynf E Te Ahvop Weight: approx. 1.3 t - 1.5 t. Dimensions: approx. L x W x H 1.5 m x 1.5 m x 1.6 m The machine is equipped with mechanical handwheels for manual operation in addition to CNC control Control: DECKEL Dialog 4 (6004 50 004602 02) Training machine The data was read from the machine, therefore given without guarantee

Condition: good (used), Year of construction: 2004, Parts shown by hand not come. Rsdsylykxjpfx Ahvjp

Condition: used, operating hours: 18,001 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, nominal power (apparent): 82 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece length (max.): 900 mm, workpiece width (max.): 900 mm, total height: 3,267 mm, total length: 4,523 mm, total width: 8,436 mm, rotational speed (min.): 12,000 rpm, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 80, Year of construction: 2004 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 2500 Y-axis travel mm: 920 Z-axis travel mm: 820 Worktable Number of pallets: 1 Table dimensions mm: 3100 Maximum workpiece size (D x H) mm: 900 Spindle Spindle speed rpm: 12000 Spindle drive power kW: 35/25 (40/100%ED) Cooling Tank capacity: 600 Tool system Tool holder: HSK-A 100 Tool magazine slots: 80 Tool changer: Pick-up With free neighboring places mm: 160 With occupied neighboring places mm: 100 Max. Tool Length mm: 250 Max tool weight kg: 12 Equipment Chip conveyor Rotating inspection windows Signal lamp Workarea light Air or water through spindle center RENISHAW Measuring probe Machine running times Under power: 61685 Spindle Working: 18001 Rated power kVA: 82 Basic machine dimensions / weight Length mm: 4523 Width mm: 8436 Height mm: 3267 Weight kg: 26000 Redpfeylw D Ajx Ahvjp

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, input voltage: 380 V, year of last overhaul: 2013, We are offering this very well-maintained Deckel FP 1 2101 tool milling machine, year of manufacture 1981. The mill was completely overhauled by FPS in 2013 and fitted with an ND780 position display. Since the overhaul, the machine has been used exclusively in medical technology for fixture manufacturing and has therefore only operated for a few hours. The machine is being sold without warranty. Control type: FP 1 2101 Serial number: 5685 Year of manufacture: 1981 Wiring diagram: 6004 004102 Operating voltage: 380 V~ Rsdpfxoym Ulgo Ahvep Frequency: 50 Hz Rated current: 13 A~ If you have any questions or require further information, please feel free to message or call us.

Condition: reconditioned (used), Year of construction: 2016, With Siemens 840 D sl Operate CNC control Year of manufacture: 2016 Travel ranges: X 400 Y 400 Z 375 mm Spindle speed range: 20 – 20,000 rpm, stepless Including the following accessories: Rjdpfoylpa Nex Ahvsp NC rotary tilting table 450 mm x 400 mm incl. table cooling 60-position tool changer with double gripper (HSK 63) 3D touch probe Heidenhain Electronic handwheel ICS 40 bar with paper band filter Scraper-type chip conveyor Bed flushing Active cooler for control cabinet Spindle cooling: water circulation cooling Rotoclear Direct path measuring system Blow air through the spindle center 3 height-adjustable machine feet Operating manuals

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-axis Heidenhain ND780 Digital Readout, special finish in light grey!!! Technical Data: >> Year of manufacture: 1986 Machine No. 2203-2126 >> Fixed angle table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min Redpfeylmh Dex Ahvsp >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head on spindle support adjustable by 150 mm >> Vertical and horizontal quill – SK40 >> Vertical quill extendable by 90 mm >> Pull stud system: M16 >> Weight approx. 1,500 kg Accessories and Features: >> 3-axis digital readout Heidenhain ND780 >> Coolant system >> Chip tray >> Central lubrication About the machine: Offered is a Deckel FP4M universal milling machine in very good condition. The machine has been partially overhauled, with minimal backlash and all leadscrews move smoothly and evenly. The milling machine runs quietly even at maximum speeds. Rapid traverse is available on all axes and all bellows are new. The fixed angle table has been newly scraped. A reliable and user-friendly machine. Oil change carried out. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take the opportunity to view and test the machine under power at our facility. For an additional charge, the machine can be supplied in CE-compliant configuration.

Condition: good (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Machine is being sold on behalf of the customer and can be inspected under power. Machine location: Czech Republic (Brno) Manufacturer: Deckel Maho Model: DMC 635V Year: 2007 Approx. 32,000 operating hours Rodpfx Aheylmdfovep Control: Heidenhain iTNC 530 Spindle mounting: SK40 Speed: 10,000 rpm Travel (X/Y/Z): 635 / 510 / 460 mm Clamping surface (table): 790 x 560 mm 30-position tool changer + Blum laser tool measurement + Paper band filter / ICS 20 bar / 600 l + Chip conveyor Dimensions (approx.) LxWxH 260 x 390 x 240 cm Installation area 530 x 590 cm Weight: approx. 4,200 kg

Condition: excellent (used), Deckel FP1 AKTIV (3-Axis Active) Machine no.: 2102-3240 Year of manufacture: approx. 1988 Travel paths: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2,000 rpm Motor power: 1.6 and 2 kW Power supply: 380 V, 50 Hz Equipment/Accessories: - Active digital readout, 3 axes, HEIDENHAIN type TNC 113 - Infinitely variable feed in X, Y, and Z axes - Vertical milling head quill travel: 60 mm - Vertical milling head swivels and extends 100 mm horizontally - Coolant system (coolant tank in machine base) - Documentation - Central lubrication system - Machine vice - Various toolholders/collets/tools Rsdpfx Aoyll A Tjhvep Space required (L x W x H): 1,350 x 1,100 x 1,700 mm Weight: 850 kg The machine has been visually reconditioned and technically inspected. Geometry inspection videos can be provided upon request. Backlash Y axis: 0.1 mm Backlash X axis: 0.2 mm Backlash Z axis: 0.15 mm Runout horizontal spindle: 0.001 mm Runout vertical spindle: 0.001 mm Parallelism deviation Y axis: 0.002 mm (measurement path: 150 mm) Parallelism deviation X axis: 0.01 mm (measurement path: 300 mm) Geometry inspection videos can be provided upon request. The following parts have been renewed: - Gears in horizontal head replaced and gear shaft newly mounted - New guide cover for Z axis + various attached parts - Machine refurbished - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Function test carried out

Condition: excellent (used), Year of construction: 2002, CNC Machining Center DECKEL MAHO DMU 80 T Year of manufacture: 2002 Control: Heidenhain iTNC 530 Redpjylk Sysfx Ahvsp Spindle: replaced on 14.11.2018, approx. 17,000 hours Technical data: Travel paths: X: 880 mm Y: 630 mm Z: 630 mm Controlled B-axis in milling head: -15° to 90° Spindle speed: 12,000 rpm Tool changer capacity: 32 positions Tool holder: SK 40 Coolant system: available