Used Deckel G1L for sale (701)

Condition: used, Keyway milling head, head for DECKEL milling machine, type FP 1 Factory number: 21948 Dovetail width: approx. 74 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 285 mm Predpeznn Hrefx Af Sob Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm Stroke size: max. 80 mm Stroke rate: max. 475 double strokes/min. Tool holder: 4-sided, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head) - This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head (Mounting in place of the vertical milling head) - Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle - Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35° - Small breakout point on the housing Weight: 28.5 kg DECKEL FP1 has a pressure angle of 15° on the drive wheel. DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes Psdjr D T U Dopfx Af Sjrb - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: Sinumerik 840 D, rotational speed (max.): 18,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, coolant supply: 70 bar, number of spindles: 1, number of slots in tool magazine: 180, Horizontal machining center DECKEL MAHO DMC 60 H Linear with double pallet changer and 180 tool magazine positions Year of manufacture: 2009 Prjdpjx Dlgnefx Af Sjb Control: Sinumerik 840D Technical data: Spindle speed: 0–18,000 rpm Drive power: 35 kW Torque: Spindle taper: HSK 63 Number of magazine positions: 180 pcs Number of pallets: 2 Pallet size: 500x500 mm Travel distances: X-axis: 630 mm Y-axis: 800 mm Z-axis: 650 mm C-axis: 0.001° All axes with linear drives Equipment: -Coolant system -Chip conveyor The machine has been regularly maintained and is still very precise! More pictures will follow. Video available on request.

Condition: used, x-travel 300 mm y-travel 160 mm z-travel 330 mm table surface area 600 x 200 mm table load capacity 200 kg Spindle Speed 40-2.000 U/min. tool taper SK40 dimensions 1200 x 1160 x 1800 mm Prjdpfx Asy Sbkbof Seb machine weight ab. 800 kg

Condition: ready for operation (used), Year of construction: 2001, operating hours: 44,134 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: HEIDENHAIN TNC426/430, spindle speed (max.): 12,000 rpm, The machine can be offered for sale at a price of €2,500 (net) ex works. TECHNICAL DETAILS Travel in X-axis: 1,150 mm Travel in Y-axis: 710 mm Travel in Z-axis: 710 mm Spindle speed (max.): 12,000 rpm Table dimensions: 1,500 x 800 mm Table load capacity: 1,100 kg C-axis: 0 - 360° Tool holder: SK40 Number of tool magazine positions: 32 MACHINE DETAILS Operating hours: 44,143 h Control system: HEIDENHAIN TNC426/430 Total connected load: 62 kVA Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,800 x 3,000 mm Machine weight: 9,700 kg EQUIPMENT Coolant system Prsdpey Uk Hwefx Af Seb NC rotary table mounted on the machine table Chip conveyor Electric handwheel Manuals / Documentation

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: Deckel MAHO, milling machine table T-slot table from CNC machining center -Table surface: Ø 800 mm -T slots: Slot width 14 mm, slot spacing 63 mm Pjdoy H Itljpfx Af Sorb -Transport dimensions: 800/800/H300 mm -Weight: 355 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC 530 , rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X-axis: 780 mm Travel range Y-axis: 560 mm Travel range Z-axis: 560 mm B-axis, infinitely adjustable: 150° (-120°/+30°) Rapid traverse rate (X / Y / Z): 50 m/min Feed rate: 20 - 15,000 mm/min Spindle speed (max.): 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool interface: SK 40 Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Pjdpfxezcqa Ss Af Sorb Table speed range: max. 30 rpm Number of tool positions: 120 Max. tool diameter: 80 mm Max. tool diameter with free adjacent tool pocket: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 Total power consumption: 64.2 kVA Dimensions & Weight Footprint: approx. 7.0 x 7.0 x 2.8 m Machine weight: approx. 12.0 t Operating Hours Operating hours: 39,256 h Power-on hours: 72,107 h EQUIPMENT Chip conveyor Coolant system High-pressure cooling 40 bar through-spindle coolant Paper band filter Pallet changer, 2 positions Tool breakage monitoring According to the seller, the spindle was presumably replaced. However, no service report is available to confirm this. The machine's data storage was renewed in January 2026. No CE declaration of conformity is available in DIN A4 or PDF format.

Condition: excellent (used), Year of construction: 2011, Heidenhain TNC 620 control system Travel X/Y/Z: 1035/560/510 mm Spindle speed: 12,000 rpm Psdjzfx T Dopfx Af Sorb Tool magazine for 30 tools, SK 40 Through-spindle cooling: 12 bar Chip conveyor

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table length: 1,600 mm, table width: 1,400 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg Prjdezauxgepfx Af Seb If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: good (used), functionality: fully functional, Deckel FP 1, Prjdjzfglhepfx Af Ssb Year of manufacture approximately 1983 / Overhauled by Arnold & Co. around 2012 3-axis digital display, Travel range X/Y/Z 400/150/340 mm, Table size 600 x 210 mm, T-slots: 4 T-slot width: 12 mm Spindle speeds: 20 - 2000 rpm Speed stages, main spindle: 12 Feed stages: 10 Spindle mount: MK 4 Vertical quill travel: 60 mm Machine weight approximately: 0.8 t

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP4M Active Manufacturer: Deckel Type: FP4M Condition: used, good Digital readout: 3 - axis digital readout Heidenhain Travels: X - axis: approx. 500 mm Y - axis: approx. 400 mm Z - axis: approx. 400 mm Table clamping surface: approx. 700 x 400 mm Speed range: approx. 50 - 2500 rpm Tool holder: ISO 40 Hydraulic tool clamping Psdpfxozgvmds Af Ssrb Drive power: approx. 6.0 kW Feed rates & rapid feeds: in all 3 axes Feed range: approx. 8 - 630 mm/min Rapid traverse: approx. 3.0 m/min L x W x H: approx. 2300 x 1800 x 1800 mm Weight: approx. 1750 kg Machine light Spindle guard Scope of delivery: - 10x tool holders - Allmatic high-pressure vice - documentation - Spindle guard

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller model: HEIDENHAIN TNC 530, workpiece weight (max.): 4,000 kg, overall weight: 35,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, spindle nose: SK 40 (DIN 69871), number of slots in tool magazine: 60, CNC Machining centre DECKEL MAHO DMU 160 P TECHNICAL CHARACTERISTICS: Year of manufacturing: 2008 CNC control: HEIDENHAIN TNC 530 Number of simultaneous axes: 5 Stroke X axis: 1600 [mm] Stroke Y axis: 1250 [mm] Stroke Z axis: 1000 [mm] Feed rate on X, Y and Z axes: 15000 [mm/min] Traversing feeds X, Y and Z axes: 60000 [mm/min] Table dimensions: Ø1500 x 1250 [mm] Prjdpfx Aezggmbjf Sob Max. load on table: 4000 [Kg] Spindle type: SK 40 (DIN 69871) Min. spindle speed: 20 [rpm] Max. spindle speed 12000: [rpm] Tool changer magazin number of stations: 60 Machine weight: 35000 [Kg] INCLUDED EQUIPMENT: 1 × HEIDENHAIN part probe 1 × laser measuring system for tool setting and tool monitoring 3 × HEIDENHAIN linear glas scales on the X, Y and Z axes 1 × through-spindle coolant system 1 × chip conveyor 1 × paper-band filtration unit (paper filter system) More information upon request.

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 700 mm Pedpfjy A Tdnex Af Sjrb z-travel 600 mm turning speeds 12000 1 U/min control Heidenhain total power requirement 59 kW weight of the machine ca. 10,6 t

Condition: good (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Machine is being sold on behalf of the customer and can be inspected under power. Machine location: Czech Republic (Brno) Manufacturer: Deckel Maho Model: DMC 635V Year: 2007 Approx. 32,000 operating hours Control: Heidenhain iTNC 530 Spindle mounting: SK40 Speed: 10,000 rpm Travel (X/Y/Z): 635 / 510 / 460 mm Pjdpfx Afsylmdfs Sjrb Clamping surface (table): 790 x 560 mm 30-position tool changer + Blum laser tool measurement + Paper band filter / ICS 20 bar / 600 l + Chip conveyor Dimensions (approx.) LxWxH 260 x 390 x 240 cm Installation area 530 x 590 cm Weight: approx. 4,200 kg

Condition: ready for operation (used), Deckel SOE Graver Grinder Largest collet bore: 17.5 mm Largest grinding length: 90 mm Largest grindable angle: 180° Largest grindable radius: 10 mm Coarse adjustment: 100 mm Fine adjustment: 15 mm Dividing head support pivoting: 90° Coarse adjustment of dividing head slide: 40 mm Fine adjustment of dividing head slide: 12 mm Height from pipe guide center to grinding spindle center: 140 mm Wheel size: 100 x 50 x 20 mm Accessories: Optics Collets You are welcome to come by for a viewing. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. If you have any questions, please feel free to contact us by phone. The phone number is located at the very bottom of the item page in the seller's imprint/legal information. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. The assembly and electrical connection of the machine/device must be carried out or checked by a trained specialist. Deviations from technical specifications and errors in the description of the item may occur and are reserved. Podev T T Ivopfx Af Ssrb Shipping is only available to businesses - for private consumers, only pickup is possible.

Condition: ready for operation (used), Deckel Maho Lasersoft 3D control panel, used, in good condition, 100% operational, scope of delivery as shown in the photos. Psdpfsx Eq E Ijx Af Ssrb

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: Pjdpfx Afoxcp R Ue Serb - NC rotary table with pallet carrier - Rotary pallet changer - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump -Manufacturer: Vogel, oil central lubrication pump from milling machine Deckel FP4L -Type: MFE 5/S3 -Motor: Type DM 6 60 W -Dimensions: 185/130/H250mm -Total weight: 5 kg Prsdpfxsul H Ene Af Seb

Year of construction: 1974, condition: like new (used), As good as new Deckel FP1 tool milling machine overhauled by FPS with 3-axis Heidenhain digital readout , Adjustable angle table , SK 40 spindle mount. Spindle brake , accessories : Counter holder , various collets. Very good working condition, can be demonstrated under power by arrangement. Predsq A Icqspfx Af Ssb

Condition: good (used), Cross table, cross-sliding table, clamping table, clamping plate with T-slots, clamping angle -Cross table for lid type: KF12 -Table surface: 400 x 400 mm -Travel path: x 50 mm/y 65 mm Psdpfeb A Ix Eex Af Serb -Weight: 60 kg

Condition: used, Year of construction: 2005, x-travel 750 mm Pjdpfx Afjt Hw Trs Sorb y-travel 560 mm z-travel 600 mm Control HEIDENHAIN iTNC 530 total power requirement 70 kW weight of the machine ca. 11.000 kg dimensions of the machine ca. m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _____ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/130 Nm Spindle run-up time / stop time 3.2 sec Feeds / Quickfeeds, X, Y and Z Axes max. 90,000 mm/min Feed force 11.000/9.500 N Axis acceleration, X / Y / Z Axes 15 / 12 / 18 m/s Spindle drive 25/35 kW Total electrical load, approx. 75 kW - 400 V - 50 Hz Weight, approx. 11.000 kg Accessories / Special Features: This machine is very interesting because of the very stable double Column Portal Design and with the modern linear technology for fast and powerful high precision work. * HEIDENHAIN modern CNC Control System Model iTNC 530 in 3 axes, with all the usual options, cycles and sub programmes. * Table moves only in x axis and allows a comfortable loading of heavy workpieces * 30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max. length 300 mm. Max. weight 10 kg. Cut-to-cut time 6 sec. Pick-Up by main spindle. * BLUM tool-breakage control, Blum Receiver for RENISHAW –Head, no head available. * Double linear motors ensure very fast feed motions and strong feed power, equipped with own cooling system. * KESSLER Milling Spindle, Liquid-cooled, steplessly programmable up to 18.000 rpm * Completely covered working area with 2 sliding doors, one with spin-type bull-eye. * KNOLL Coolant device with scraper-type chip conveyor and pressure pomp. * Spindle working hours approx. 23.000 h Condition : Very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2007, x-travel 1350 mm y-travel 560 mm Podpfjzlb Dfsx Af Ssrb z-travel 510 mm Control Heidenhain iTNC 530 total power requirement 13 kW weight of the machine ca. 5 t

Condition: good (used), DMG DMC 63 V, serial number 2885-0725, 11,972 operating hours. Available at the end of 2026. Psdpezqdlpsfx Af Sorb

Condition: used, machine/vehicle number: 2810 - 4271, x-travel:500 mm y-travel:400 mm z-travel:450 (390) mm surface of table:710 x 430 mm spindle speed max.:40 - 4000 U/min feed range:10-2000 mm/min rapid traverse:4,0 m/min spindle drive motor:4,0 kW tool taper:SK40 control:CNC Contour 3 power capacity:9 kW weight of the machine ca.:2 t dimensions of the machine ca.:2,4 x 2,3 x 2,3 m Deckel FP4 NC Machine for Medium - Heavy range use. - Spindle Head can be swiveled 90° (left or right) - Universal Work Table ( 710 x 430 mm ) - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872. - Deckel Contour 3 CNC control Systems. Pedpeh Ra Izjfx Af Ssrb - Portable Electronic handwheel and Handheld operating unit for easy Setting and control. - Powerful 2.2 kw Siemens Axis Servo motors and 4.0 kw Motor for Main Spindle. The machine has Central Lubricant system, Seperate Power cabinet, Enclosed Chip tray and Splash cabin

Condition: used, Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 1,600 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 90 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 530, workpiece weight (max.): 3,000 kg, total height: 3,600 mm, total length: 8,017 mm, total width: 4,905 mm, table width: 1,000 mm, table length: 1,250 mm, table load: 3,000 kg, rotational speed (max.): 10 rpm, overall weight: 35,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 28 W, spindle nose: HSK63A, number of slots in tool magazine: 60, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, Equipped with: - 5 axes - Automatic pallet changer system - High-pressure coolant system running through the spindle with paper filter and 1000-liter tank Prsdpfx Afezgbdzj Ssb - Automatic tool presetting system by BLUM - CE marking