Used Deckel Fp6 for sale (692)

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication Itjdpou Dm E Hefx Ah Neb To the machine : On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Universal milling machine Deckel FP4M with 3-axis digital display Heidenhain in special paint light gray !!! Technical data: >> Year of construction 1986 Machine no. 2203-2486 >> Rigid angle table >> Speed: 50 - 2500 rpm >> Feed: 8 - 630 mm/min >> Drive power: 3.7 / 4.4 KW >> Spindle brake >> rapid traverse 1300 mm/min >> Traverse paths X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved 150 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Vertical quill 90mm extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: Ijdpfx Aevb T Ufoh Notb >> 3-axis digital display Heidenhain >> Coolant device >> Chip tray >> Central lubrication To the machine : We are offering a Deckel FP4M universal milling machine in very good condition. The machine has little crank play and all spindles can be moved easily and evenly. The milling machine runs smoothly even at maximum speeds. Rapid traverse in all axes. A reliable and user-friendly machine. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more precise. Take the opportunity to inspect and try out the machine under power on site.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm Itsdovbifgepfx Ah Nob >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop >> Operating instructions >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3L with 3-axis digital display K&C NEW, very good condition Technical data: >> Year of manufacture approx. 1975 Machine no. 0924 >> Rigid angle table (clamping surface 1000 mm x 440 mm) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Feed from 10 to 500 mm/min >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2.2 KW >> Travel X/Y/Z: 800/300/400 mm (travel Y can still be moved by 200) >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable SK40 >> Tightening system S20x2 >> Weight approx. 1900 kg Accessories and equipment: >> 3-axis digital display K&C Newly installed with manufacturer's guarantee and operating instructions. Display device: reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, rows of holes, radius milling functions, etc. Itsdjvn N Hdjpfx Ah Nob >> Mechanical central lubrication >> Operating instructions >> Hydraulic vice 160mm >> Walter rotary table 500mm About the machine: A Deckel FP3L universal milling machine in very good condition is offered. The vertical head can be moved by 200 mm to allow an even larger working area. A central pump ensures the lubrication of the various axes. The special feature of this type of machine is the basic structure; it is a machine with an inclined table bed. The movements are assigned to the work spindle and thus to the tool. The accuracy is therefore very high, since different workpiece weights have no influence on the axis movements. Mechanically and electrically tested. Take the opportunity to view and try out the machine on site with power on.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Deckel Maho DMU 50 evo Linear with TNC 530 control from Heidenhain, TOP condition Technical data: >> Year of manufacture 2006 >> Manufacturer Heidenhain, type iTNC 530 >> Travel paths X500/Y450/Z400 Isdpfxevyr Tdj Ah Nstb >> C-axis 360 degrees >> B-axis 0 degrees to 161.955 degrees >> Tool holder HSK A63 >> Max. spindle speed up to 18000 rpm >> Feed continuously programmable up to X, Y, Z 20000 mm/min C-B axis continuously programmable up to rapid traverse speed >> Rapid traverse Y- Z axis 50 m/min X-axis 80 m/min (linear drive) B-axis 40 rpm C-axis 50 rpm >> Tool magazine: Double gripper 60 magazine spaces >> Table clamping area Ø 500 x 380 mm T-slot spacing 63/14H7 >> Table load 200 KG >> Dimensions and weight: approx. Machine without control and attachments Depth 3.0 meters Width 2.4 meters Height 2.6 meters Weight approx. 7000 kg >> Operating voltage 400 V >> electr. Handwheel Heidenhain HR 410 >> Power connection 17 KVA >> Chip conveyor >> Active spindle cooling >> Mist extraction >> IKZ 40 bar >> Coolant lubricant cleaning system (fleece filter system) >> Spray gun >> Visiport >> Sealing air on the measuring system >> Preparation for robot loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage control Cpvnunmsoi >> Complete documentation Dn2F2R The following work was carried out: >> Generally overhauled main work spindle >> Complete maintenance: All cooling hoses and pneumatic hoses replaced, new filters, fluids and belts replaced. Scrapers, etc. Complete cleaning. >> Geometrically measured (acceptance protocol) About the machine: A Deckel Maho DMU 50 evo Linear machining center with a TNC 530 3D path control from Heidenhain is offered. The machine is in very good condition. The main spindle on the DMU was overhauled (replacement spindle), completely serviced and an acceptance protocol was created. Take advantage of the opportunity to view and try out the machine on site with power on.

Condition: excellent (used), Year of construction: 1986, Dear Sir or Madam, We are offering you very well-maintained milling machines of the Deckel FP4M type. The machine is at least technically tested in our workshop and is therefore fully functional. We look forward to your inquiry! Delivery time: on request Machine no. xxxx-xxxx Year of manufacture: xxxx Table design: rigid Speed: 50 - 2500 rpm Feed: 8 - 630 mm/min Rapid traverse: 1300mm/min Drive power: 3.7kW / 4.4kW Rapid traverse: 1300mm/min Iedpfxslrw Tij Ah Netb Travel paths X/Y/Z: 500/400/400mm Tool holder: SK40 Tightening system: M16 Quill stroke vertical: 90mm Weight: approx. 1.6t Other equipment and accessories: on request Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can overhaul the selected machine completely or in part - You are free to choose the paint color of the selected machine decide - If you wish, you can order additional accessories such as tools etc. directly - If you wish, we can install additional accessories such as safety devices etc. - We will be happy to take care of the shipping and/or delivery

Condition: reconditioned (used), feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 340 mm, Updated Machineseeker description (with travel distances) Deckel FP1 Aktiv – 3 axes – partially overhauled – ready for immediate use Offered for sale is a Deckel FP1 Aktiv in technically inspected and partially overhauled condition. The machine has been professionally refurbished and is in a reliable, operational state. Ideally suited for workshops, toolmaking, training, as well as single part and small batch production. This is not an unchecked used machine but a technically overhauled tool machine with a clearly defined scope of performance and a predictable delivery time. Technical data and features Travel distances: X-axis approx. 300 mm Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Stepless feed on all 3 axes Coolant system Brake motor Itedpfx Ahox Tdy Io Nsb Fixed angle table New LED work lamp New leveling feet Technical documentation in PDF format Scope of refurbishment Workshop tested and partially overhauled Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of all existing adjustment options Renewal of all lubricants Replacement of selected standard and various wear parts New paint finish in RAL 7035 / 7016 The conscious decision for a partial overhaul provides an optimal compromise between operational reliability, cost-effectiveness, and availability. A complete overhaul of the guideways was not carried out, as there was no technical necessity for this. Scope of delivery Machine loaded free of charge Delivery time approx. 12 weeks

Condition: good (used), Year of construction: 1990, Deckel FP 4 MK Tool Milling Machine Deckel FP 4 MK with Heidenhain TNC 113 Control System, Year of Manufacture 1990, Completely Overhauled in 2014, Excellent Condition, CE Compliant! This machine comes from the training workshop of Continental. Itsdpfxeyalcps Ah Njb Technical Data: Year of Manufacture: 1990 Completely Overhauled: 2014 Digital Readout: 3-axis active digital readout HEIDENHAIN TNC 113 X-Axis Travel: 500 mm Y-Axis Travel: 400 mm Z-Axis Travel: 400 mm Tool Holder: SK 40 hydraulic tool clamping DIN 2080 Milling Head Type: Vertical milling head Speed Range: 50 - 2,500 rpm, 18 steps Table Type: Swivel table Clamping Surface Table: 800 x 490 mm T-slot Size: 14 mm Weight: approx. 1,450 kg Dimensions: approx. 2,500 x 2,700 x 2,100 mm Accessories and Equipment: Heidenhain TNC 113 control Hydraulic clamping vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, control manual, and programming examples Hand wheels Coolant system About the machine: Offered here is a Deckel FP 4 MK tool milling machine equipped with a Heidenhain TNC 113 control unit. This universal milling machine is in excellent original condition, having only been used for training purposes in a facility. The control is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching between vertical and horizontal milling is straightforward thanks to the tilting vertical head. The guides are regularly lubricated via the central lubrication system. The Deckel has been mechanically and electrically tested in our facility. You are welcome to inspect and test the Deckel under power on-site. You will find more milling machines from renowned manufacturers on our website.

Condition: used, Year of construction: 1996, operating hours: 8,900 h, functionality: fully functional, DMG vertical machining center Model DMU 50 V Year : 1996 5 axis Length movement : 500 mm. Cross movement : 380 mm. Vertical movement : 380 mm. Spindle : BT 40 Spindle speed : 8000 RPM. Tools in magazine : 24 pieces Control : Deckel Maho MillPlus Spindle hours : 8900 Interface RS-232 C Short arbors Itsdpfx Aeyahh Ioh Nob

Condition: good (used), Year of construction: 2002, operating hours: 24,396 h, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 39 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, table width: 600 mm, table length: 850 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Our 4-axis machining center DMG (DMC 64 V linear) is currently for sale. • Control system: Heidenhain iTNC 530 • The machine is in good condition, fully operational, and can be inspected under power on site. • The machine is equipped with a full-fledged 4th NC axis (rotary table by Nikken). • The machine has an additional M-function: "Compressed air cooling through the spindle." • Chip conveyor included. • We have a factory-overhauled milling spindle in stock as a spare part, which can be purchased for an additional charge if needed. • The tools and clamping devices shown in the pictures are not included in the sale. • We are extremely satisfied with the machine’s precision and reliability. • The machine is available at short notice. • Dismantling and loading of the machine can be organized by us upon request for an additional fee. Itjdpfxoyacito Ah Nob

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm Itedpfx Asx S Rxnjh Njb control SLIMline Siemens turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 13 / 9 kW Torque 83 / 57 Nm tool taper SK 40 table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min rapid traverse 30 m/min total power requirement 17 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V Ecoline - only 9.290 Spindle-Hours

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: S 11 Speed /2357, total height: 1,760 mm, total length: 1,100 mm, total width: 850 mm, spindle speed (max.): 12,000 rpm, spindle speed (min.): 500 rpm, feed length X-axis: 100 mm, feed length Y-axis: 190 mm, feed length Z-axis: 325 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, grinding length: 270 mm, rotational speed (min.): 500 rpm, rotational speed (max.): 12,000 rpm, center height in crank: 220 mm, center height: 300 mm, collet bore: 25 mm, grinding spindle speed: 12,000 rpm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, pivoting range: 360 °, travel distance X-axis: 100 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 325 mm, center width: 620 mm, grinding spindle motor power: 1,100 W, table length: 190 mm, table width: 200 mm, table height: 1,020 mm, power: 1.1 kW (1.50 HP), height adjustment type: electric, workpiece diameter (max.): 400 mm, input current: 20 A, grinding diameter: 125 mm, input frequency: 50 Hz, disc diameter: 125 mm, input voltage: 380 V, space requirement width: 2,000 mm, space requirement length: 1,800 mm, space requirement height: 1,800 mm, grinding wheel speed: 12,000 rpm, distance table to spindle center: 325 mm, tool diameter: 300 mm, workpiece length between centers: 270 mm, distance between centers: 270 mm, number of spindles: 1, additional equipment features: Drehzahl stufenlos einstellbar, Equipment: rotational speed infinitely variable, Universal tool grinding machine ISOG S 11 Speed, year 2009, opto-electronic measuring system with microscope, video camera, and monitor. Universal dividing head SK 40. 1 set of indexing plates. Radius grinding attachment. Helical and clearance grinding attachments. Wheel dressing device. Extraction unit. 1 set of collets. 1 machine vise. Grinding wheel arbors L=48mm and L=75mm. Setting gauges and support fingers. Ijdpfx Ahoyaatve Notb

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture. Itedpfox S Edlsx Ah Njb

Condition: used, total height: 16,000 mm, total width: 1,100 mm, total length: 1,500 mm, Empty weight: 1.000 kg Milling machine miller, mill Model: Conventional Manufacturer: Deckel Type: FP2 Travel: 400x270x400mm Spindle-speed: 40-2000 pm Table: 700x330mm Spindle-take: ISO40 Ijdpfsx S Eayex Ah Njtb Motorpower: 2,2kW Machine-dimensions: 1500x1100x1600 Machine-weight: 1000kg. - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 2.2 - X-axis travel [mm]: 400 - Y-axis travel [mm]: 270 - Z-axis travel [mm]: 400 - Table length [mm]: 700 - Table width [mm]: 330 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Transport dimensions: 1500mm x 1100mm x 16000mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1984, Ref. -No.: 10594 Manufacturer: DECKEL GILDEMEISTER Type: MD 3S Year of construction: 1984 Type of control: CNC Control: ELTRO MPULS Ijdpfx Asx Sw I Njh Netb Storage location: Halberstadt Country of origin: Germany Turning Diameter: 400 mm Turning Length: 600 mm Swing Diameter: 600 mm Spindle Bore: 73 mm

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Itedpex Sv I Uofx Ah Njb Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,421 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 18000 Tool taper BT40 Number of axis 5 Movement X-Axis Movement 2500 mm Y-Axis Movement 920 mm Z-Axis Movement 820 mm This 5-axis DECKEL MAHO DMF 250 linear was manufactured in 2006. It features a Heidenhain iTNC530 control, extensive travel capabilities with X2,500mm, Y920mm, Z820mm, and a high-speed spindle at 18,000rpm. The machine includes a BT40 spindle taper, ATC 30 magazine, and full NC rotary capabilities on A, B, and C axes. Consider the opportunity to buy this DECKEL MAHO DMF 250 linear universal machining centre. Contact us for more information about this machine. Application Types Ijdex D Igwepfx Ah Njtb Milling

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,900 h, General Data Machine weight 6800 Main Drive Spindle speed range 12000 Movement Itsdpfox Stl Dex Ah Nsb X-Axis Movement 640 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm Table Outer length 850 mm Outer width 600 mm This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2005. Ideal for precision machining, this vertical machining center offers robust performance and reliability. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64V linear vertical machining center. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rotational speed (max.): 12,000 rpm, CNC control Heidenhain TNC 430 32-fold tool changer coolant device 2x chip conveyor measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. A dividing wall is also with the machine. Then the X-travel will be split. Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 520 mm Itjdpfx Ahsu Hf Ryj Nsb Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 1986, travel distance X-axis: 710 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 455 mm, x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 4 Speed: 6300 rpm Tool holder: SK40 Quill stroke: 80 mm Table size: 550 x 1000 mm Itjdpjx T Awxofx Ah Neb Table load: 0.6 t Total power requirement: kW Machine weight approx.: 4 t

Year of construction: 1974, condition: like new (used), As good as new Deckel FP1 tool milling machine overhauled by FPS with 3-axis Heidenhain digital readout , Adjustable angle table , SK 40 spindle mount. Spindle brake , accessories : Counter holder , various collets. Very good working condition, can be demonstrated under power by arrangement. Iodpfx Ahjq A Icqe Notb

Condition: good (used), Boring tool Scope as shown in the pictures Itedpex Trkzefx Ah Nob ISO / SK 40 with drawbar thread for DECKEL machines

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 7500 kg Control Unit Brand SIEMENS Model SINUMERIK 810D powerline and ShopMill Main Drive Spindle speed range 50–12000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 640 mm X-Axis Rapid Traverse 70 m/min Y-Axis Movement 600 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 500 mm Z-Axis Rapid Traverse 40 m/min Itedpfx Ajx R E Izoh Njb Table Table load 600 kg This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2007. It features a Siemens 810D ShopMill control, SK40 spindle with speeds up to 12,000 rpm, and a tool magazine with 30 positions. The machine includes a chip conveyor, coolant gun, and a high-pressure coolant system. Ideal for precise and efficient machining. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2001, General Data Machine weight 6500 kg Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Spindle speed range 18000 rpm Ijdpfox R E Iuox Ah Notb Spindle motor power 35 kW Number of axis 3 Movement X-Axis Movement 560 mm Y-Axis Movement 560 mm Z-Axis Movement 510 mm This 4-axis DECKEL MAHO DMC 50 H horizontal machining centre was manufactured in 2001. Ideal for precision machining, it offers robust construction and reliable performance. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2013, x-travel 835 mm y-travel 510 mm z-travel 510 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm table surface area 1.000 x 560 mm max. table load 800 kg Ijdpfjx R Enuex Ah Notb number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min feed power 5.000 N total power requirement 28 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,8 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 40.108h operating hours, 12.656h spindle hours - incl. Lehmannn 4th Axis - incl. Lehmann tailstock - incl. 20x SK 40 tools