Used Deckel Fp2 Nc for sale (690)

Condition: reconditioned (used), Year of construction: 1988, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1988 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Machine no.: 88-6730 Guarantee: 12 months single shift from delivery For machines located outside of our Northern Bavarian sales area, the travel costs are to be borne by the customer. Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or pulling the power plug incl. production of a mounting adapter plate Used as seen The machine is technically corresponding to the state of the year it was built. Gbedpfx Aolxpfmjn Rol

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 geometric acceptance with test report Accessories: Gbedpfxer En Dyj An Rjl - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Condition: reconditioned (used), Year of construction: 1996, Tool and cutter grinder Make: Deckel Model: S0 Gsdsx Hx Eljpfx An Robl Year of manufacture: 1996 – workshop tested Machine no.: 26617 Accessories: - Grinding wheel with flange - Operating manual Used as seen The machine technically corresponds to the condition of its year of manufacture.

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Gbedpfx Anox It Rxs Rol Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: reconditioned (used), Year of construction: 1998, Tool Grinder Make: Deckel Model: S0 Year of manufacture: 1998 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Machine no.: 26230 Gbsdpfoy Drkcex An Rjl Warranty: 12 months single-shift from delivery. For machines located outside our North Bavarian sales area, travel costs are to be covered by the customer. Accessories: - Grinding wheel with flange - Operating manual Including new electrics On/Off switch in new enclosure with undervoltage release coil to provide restart prevention (e.g. in case of power failure or unplugging the machine) Sold as seen Technically, the machine corresponds to the state of the art at the time of its year of construction.

Condition: reconditioned (used), Year of construction: 1994, Universal tool milling machine Make: DECKEL Model: FP 4 MK Aktiv Year of manufacture: 1994 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey Gbjdpfx Ajfzbtmen Rol RAL5008 grey blue Mach. no.: 2203-8668 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Universal table 660 x 380 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating instructions -used, as seen-

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Active Year of manufacture: unknown - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2302-2319 Gjdsh Rv U Espfx An Robl Milling head type: 2271 Milling head number: 700-0883 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, electric - Coolant system - Operating instructions - Drill grinding device with diamond disk -used, as seen-

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2203-7097 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 Godpfx Anolfc U Ds Robl - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating instructions Used as seen The machine is technically corresponding to the state of the year of manufacture.

Condition: good (used), Year of construction: 2003, x-travel 500 mm y-travel 500 mm z-travel 420 mm Control Heidenhain / Millplus Gjdjy Raluepfx An Robl total power requirement 35 kW weight of the machine ca. 5,7 t

Condition: ready for operation (used), Year of construction: 2001, - USED - 5-AXIS VERTICAL MACHINING CENTRE WITH ROTARY AND TILTING TABLE X-AXIS TRAVEL: 500 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 400 mm SPINDLE: 9000 rpm; 13 kW; HSK 63 B-AXIS: -10° +95 ° C-AXIS: 360 ° TABLE SIZE: 700 x 500 mm MAX ADMITTED LOAD: 200 Kg TOOL MAGAZINE: CHAIN-TYPE ; 16 POS CONTROL UNIT: HEIDENHAIN WEIGHT: 3000 Kg OVERALL DIMENSIONS: 2000 x 1520 x 2140 mm ACCESSORIES: SWARF CONVEYOR Gbedpfswl R Dqex An Rol NOTE: MANUAL 5th AXIS

Condition: good (used), Year of construction: 2001, functionality: unexamined, travel distance X-axis: 350 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 340 mm, rapid traverse X-axis: 20 m/min, controller model: Siemens Sinumerik 840 D, total height: 2,100 mm, total length: 3,800 mm, total width: 3,600 mm, table load: 100 kg, rotational speed (max.): 15,000 rpm, overall weight: 1,600 kg, For sale is a 5-axis machining center from DMG, model DMU 35 M, equipped with two manual axes. The machine is in good condition. Technical specifications: DMU 35 M Year of manufacture: 2001 X-axis: 350 mm Y-axis: 240 mm Z-axis: 340 mm Spindle speed: 15,000 rpm Feed rate: Infinitely variable up to 5,000 mm/min Rapid traverse: 20 m/min Clamping surface: Ø 400 x 280 mm Rotary range: 360° (mechanical) Table clamping: +105 / -150 (mechanical) Max. table load: 100 kg Tool holder: SK 40 Tool clamping: pneumatic/mechanical Required space: 3,800 x 3,600 x 2,100 mm Transport dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Transport and loading can be arranged for an additional charge, Europe-wide. All prices are subject to VAT. Inspection by appointment is possible. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase and sales Gbodpjy Nz Nrefx An Rel BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell your machine? For further information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2012, controller manufacturer: HEIDENHAIN, overall weight: 15,070 kg, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DMG DECKEL MAHO DMF 260|11 was manufactured in 2012. It features a spindle speed of 14,000 RPM and a tool magazine with 30 stations, providing efficient tool management. The machine is equipped with a swivel milling head and an NC rotary table for enhanced versatility. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMF 260|11 vertical machining centre we have for sale. Contact us for further details. • Power consumption: 46 kVA • Voltage: 400 V 3/N, PE • Frequency: 50/60 Hz Gjdpfxjy Nyvwo An Rsbl • Nominal current (In max): 66 A • Maximum fuse: 80 A • B-axis: Swivel milling head • C-axis: NC rotary table (left side) • Cooling: Cooling unit for drives • Lighting: LED machine light • Axis drives: X/Y/Z feed drives Additional equipment • Spray gun Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2004, Deckel Maho DMC 70 V – Vertical Machining Centre Offered here is a used vertical CNC machining centre Deckel Maho DMC 70 V equipped with Heidenhain TNC 426 control. Gbodoy R E H Depfx An Rel Technical specifications: Type: Vertical machining centre, 3-axis Travel X/Y/Z: 700 / 500 / 500 mm Table size: approx. 750 x 500 mm Spindle speed: up to 8,000 rpm Tool changer: Chain magazine Control: Heidenhain TNC 426 Operating voltage: 400 V / 50 Hz Manufacturer: Deckel Maho GmbH, Pfronten Condition: Used, on-site inspection possible

Condition: ready for operation (used), Deckel Maho 2238-4630 rotary table SN: 0174 for FP4-60 machine – diameter: 63cm / height: 43cm, used, normal signs of wear, 100% functional, delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Gbjdey Np Najpfx An Rol

Condition: ready for operation (used), Deckel Maho tool holder for Deckel Maho FP4-60 milling machine, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Gbsdpfx Anoy Np Nge Rel

Condition: used, Year of construction: 2013, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Sinumerik 840 D SL Siemens turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm tension force 8 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm distance spindle nose and table 120 - 580 mm number of toolpositions 30 pos. Max. mould width 80 / (130) mm max. tool length 250 mm max. tool weight 6 kg Gbsdpfx Ansym Dz Ro Rjl max. total weight 80 kg change-time tool to tool 1,6 sec change-time chip to chip 6,0 sec rapid traverse 30 m/min feed speeds 1 - 20.000 mm/min Feed force max. 5 kN total power requirement 28 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 4,0 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 635 V New Design - ShopMill - WITHOUT perforated plate - WITHOUT clamping device - WITHOUT tools

Condition: used, Year of construction: 2012, x-travel 635 mm Gbsdex Nqu Dspfx An Rsl y-travel 510 mm z-travel 460 mm table surface area 790 x 560 mm spindle taper SK 40 spindle turning speed - stepless 20 - 12.000 U/min spindle drive 13 kW max. torque on the spindle 83 Nm feeds x/y/z -stepless bis 20.000 mm/min rapid traverse 30 m/min ATC 20 Pos. tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 12 bar control HEIDENHAIN, TNC 620 total power requirement 17 kVA weight of the machine ca. 3,9 t dimensions of machine L x W x H 3,0 x 1,92 x 2,35 m Accessories: electron. hand panel, chip conveyor,coolant

Condition: ready for operation (used), Year of construction: 2007, operating hours: 20,082 h, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis DECKEL MAHO DMC 70 H duoblock was manufactured in 2007. It features a Siemens 840D control unit and a robust tool holder type of SK40. The machine is equipped with hydraulically clamped clamping towers, ensuring secure workpiece handling. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 70 H duoblock horizontal machining centre we have for sale. Contact us for further details. • Apparent power: 60 kVA • Nominal current (max): 86 A • Fuse protection: 100 A • Voltage: 400 V • Frequency: 50 Hz • Control voltage: 24 V Additional equipment Gbjdpfsy Ndibsx An Rol • 2 hydraulically clamped clamping towers (workholding) Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2003, operating hours: 64,930 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 400 kg, rotational speed (max.): 12,000 rpm, Required space: approx. 3.5 x 2.5 x 2.5 m (L x W x H, without chip conveyor) Machine weight: approx. 6,300 kg Gjdpfx Ansy Ncnpe Rebl

Condition: excellent (used), Year of construction: 2008, Vertical machining center Deckel Maho DMF 220 Linear Year of manufacture: 2008 Control: Siemens 840 D Technical specifications: CNC control: Siemens Sinumerik 840D Number of axes: 3 X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Max. clamping height: 600 mm Table size (LxW): 2,600 x 600 mm Max. table load: 2,200 kg Guideway type: Linear guide Max. power: 35 kW Tool holder: SK40 Gbsdjy Nbbzepfx An Rjl Tool magazine capacity: 60 Tool change time: 9.6 s The machine was in active serial production until recently and was predominantly used for machining steel and aluminum. Equipment: ⦁ Partition wall for setup time optimization (parallel machining / setup in one cabin half) ⦁ Conveyor belt filter system for coolant processing ⦁ Automatic tool changer ⦁ Generous working area for complex components

Condition: good (used), Year of construction: 1995, operating hours: 28,099 h, functionality: fully functional, machine/vehicle number: 662280, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: DECKEL MAHO, controller model: CNC 425, total height: 2,000 mm, total length: 3,000 mm, total width: 2,400 mm, table width: 480 mm, table length: 900 mm, overall weight: 2,000 kg, number of slots in tool magazine: 16, mount diameter: 40 mm, input voltage: 400 V, power: 20 kW (27.19 HP), input frequency: 50 Hz, input current: 50 A, DECKEL MAHO MH 600 B CNC Vertical Machining Center - Tool holder: SK 40 Gsdpey I Tgysfx An Robl - Table with 7 T-slots - Including rotary table from manufacturer WALTER, type: TANIP125NEG, year of manufacture: 2010 Notice: The item must be collected on a binding date between 24.08. and 27.08.2026 at a time to be mutually agreed. FCA D-61352 Bad Homburg – loaded on truck

Condition: used, functionality: fully functional, Tool Grinding Machine Manufacturer: DECKEL, Model: S 1 Technical Details Manufacturer: DECKEL Model: S 1 Speed: from 3750 to 7500 rpm Connection: 380 V Machine weight: approx. 400 kg Dimensions (L x W x H): 1.2 x 0.70 x 1.40 m All information provided without guarantee. A powered demonstration is possible at any time in our showroom. Gbjdpfx Anjyw N Tue Rjl

Condition: ready for operation (used), Year of construction: 2001, operating hours: 8,200 h, functionality: fully functional, machine/vehicle number: 28850018432, TECHNICAL DETAILS Tool diameter: max. 140 mm Speed at maximum diameter, max.: 6,500 rpm Balancing quality according to DIN ISO 1940: G 6.3 Tool Magazine Number of tools: 24 Tool diameter, standard tools: max. 80 mm Tool diameter, special tools with adjacent positions free: max. 140 mm Tool length: max. 300 mm Tool weight: max. 7 kg Magazine load: max. 72 kg Table Clamping surface with T-slots DIN 650-14: 800 x 500 mm Loading height, top of table: 850 mm Workpiece height: max. 240 mm Table load capacity: max. 500 kg Coolant System Tank capacity with standard chip container: 150 l Tank capacity with spindle cooling: 80 l Pump performance standard, flow rate: 30 l/min Pump performance standard, pressure: 1.2 bar Tank capacity with chip conveyor option: 750 l Pump performance, chip conveyor option, flow rate: 40 l/min Pump performance, chip conveyor option, pressure: 3.0 bar Tank capacity including chip conveyor: 750 l Pump performance, internal coolant supply, flow rate: 30 l/min Pump performance, internal coolant supply, pressure: 15 bar Chip Disposal Chip conveyor discharge height: 850 mm Chip conveyor type: scraper belt MACHINE DETAILS Rated power: 30 kVA Rated current: 42 A Delayed main fuse: 3 x 50 A Operating voltage: 400 V Frequency: 50 Hz Compressed air connection: 6 bar Required system delivery rate: 38 Nm³/h Ambient temperature: +5 to +40 °C Average temperature over 24 h: +35 °C Relative humidity: 30–95 % Dimensions & Weight Transport dimensions of the machine with table (L x W x H): 3.1 x 2.1 x 2.4 m Transport weight: approx. 4,200 kg Mounting elements: 4 x BNV 150/4 EQUIPMENT Fixed station coding Vertical tool changer Pick-up system via work spindle Coolant system Spindle cooling Chip conveyor Internal coolant supply Gsdpfey Rta Eox An Rjbl Mounting elements BNV 150/4

Condition: used, DECKEL dividing head for direct and indirect dividing Includes the following equipment: - with tailstock - with draw tube - with 3 division plates Optional: Godpfx Ajy Rmwqjn Robl 3-jaw chuck and/or 4-jaw chuck

Condition: used, Year of construction: 2001, x-travel 630 mm y-travel 500 mm z-travel 500 mm control Heidenhain TNC 430 spindle speed: 10000 U/min power capacity - milling spindle 13/9 kW feed 30 m/min rapid traverse 30 m/min no. of workpieces in the magazine 24 Stück tool taper SK 40 table surface area 800 x 500 mm table load 0,5 t Overall size 1,9 x 3,3 x 2,6 mm weight of the machine ca. 4500 kg Used vertical machining centre in good condition. Godjy I A Umopfx An Robl - external eletronic hand wheel - coolant system - servo tool magazin