Used Deckel Fp 1 for sale (698)

Condition: used, functionality: fully functional, x-axis travel: 400 mm y-axis travel: 220 mm z-axis travel: 400 mm Pjdpfx Agoxphn Ejwsgu Speed range: 40 - 2000 rpm Speed steps: 18 Internal taper: SK40 Spindle head movement automatic/manual: 190 / 200 mm Clamping surface (table): 730 x 240 mm Table longitudinal travel automatic/manual: 390 / 400 mm Table vertical travel automatic/manual: 390 / 400 mm Feed range: 8 - 400 mm/min Rapid traverse: 1200 mm/min Electronic digital display SONY Rotary table Sheet steel cabinet with 5 drawers and various machine accessories, e.g. various spare parts, tool holders, milling cutters, exchangeable table

Year of construction: 1969, condition: good (used), Univ. tool milling machine DECKEL type FP 1 Machine No. 37101 Year of construction approx. 1969 travel X: 300 mm Y: 150 mm Z: 340 mm table size 600 x 200 mm spindle mounting MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 1,0 and 1,5 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - pinol shift at vertical milling head 60 mm - adjacent control cabinet space requirement L x W x H 1000 x 900 x 1750 mm Podpfx Asl Dx I Segwegu weight 690 kg good condition accessories: - collets - rotary table - vice - Counterholder H. Milling

Condition: good (used), functionality: fully functional, DECKEL FP1 Active milling machine Manufacturer: Deckel Type: FP1 Active Condition: very good Control type conventional Control active HEIDENHAIN TNC X-path 300 mm Y-path 160 mm Z-path 340 mm Tool holder SK40 Speed 40-2000 rpm. Control Active HEIDENHAIN TNC Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. TBH 1200x1100x1600 mm Pgsdpfx Agexnniajwju

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2810-4023, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, table length: 430 mm, table width: 710 mm, total height: 2,400 mm, total length: 2,300 mm, total width: 2,300 mm, overall weight: 2,000 kg, A well-maintained and fully functional Deckel FP4NC tool milling machine with Contour 3 control is for sale. Included is a dividing unit (4th and 5th axis) Deckel FP 2212 (No. 800-0237), which significantly expands the application range of the machine. The machine was only used for plastics. The machine is ready for immediate use and is ideal for precise single and series production or educational institutions. It was last used in November 2024. The machine can be inspected at any time by arrangement. Pick-up on site: Grossacherstrasse 41, 8634 Hombrechtikon, from ramp Technical data: Machine: Deckel FP4NC Machine/vehicle number: 2810 - 4023 Condition: used, very good condition Accessories: Dividing unit Deckel FP 2212 + extensive additional accessories Travel paths: x-axis: 500 mm y-axis: 400 mm z-axis: 450 (390) mm Work table: Table area: 710 x 430 mm Spindle: Speed range: 40 – 4000 rpm (stepless) Spindle drive: 4.0 kW Tool holder: SK40 Feeds: Working feed: 10 – 2000 mm/min Rapid traverse: 4.0 m/min Performance and dimensions: Total drive power: 9 kW Machine weight: approx. 2 t Footprint: approx. 2.4 x 2.3 x 2.3 m (LxWxH) Equipment: CNC control Contour 3 Dividing unit available for 4th and 5th axis Vertical head swivels +/- 130° Rigid angle table Automatic central lubrication Remote control panel with removable handwheel Separate control cabinet with main safety switch Emergency stop on the control panel Compact design Special features: Deckel dividing unit FP 2212 included in the scope of delivery Podpowrya Iofx Agwjgu Extensive accessories for versatile machining

Condition: ready for operation (used), Working travels 300x150x340mm Universal table 600x260mm Spindle taper 40 Spindle speeds 40-2000 rpm Digital read-out Misc.accessories MARCELS MASCHINEN CH Pgjdpfx Agsdr E Apswsu

Condition: excellent (used), machine/vehicle number: 2300-0053, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table length: 1,000 mm, table width: 520 mm, total height: 1,900 mm, total length: 1,500 mm, total width: 1,800 mm, rotational speed (max.): 200 rpm, rotational speed (min.): 40 rpm, overall weight: 1,000 kg, - Number of table slots: 6 EQUIPMENT: Pedpfswdn A Uex Agwegu - Swivel table - Three-axis digital readout (Heidenhain) - New bellows - New cranks

Condition: good (used), DECKEL FP2A CNC milling machine with Contour 3 control and vice. x-path 300 mm y-path 300 mm z-path 400 mm Spindle holder ISO 40 Gmqcb8 Pgjdpjrfaq Rjfx Agwju Spindle speeds 40 - 4000 rpm Table size 620 x 390 mm Feed rates infinitely variable 4 - 4000 mm/min Table load 0.45 t Total power requirement kW Machine weight approx. 1.6 t Operating voltage 380 V Base area 1.9 x 2.0 mm Switch cabinet 1.90 x 0.75 x 1.05 m Space requirement approx. 2.9 x 2.7 x 2.0 m

Condition: good (used), Year of construction: 1987, Deckel FP4M tool milling machine with 3-axis Heidenhain digital readout, fixed table, SK 40 spindle taper. Accessories: various collets and milling arbors. Good, ready-to-operate condition. Can be demonstrated under power by arrangement. Psdoxmi I Ijpfx Agwogu

Condition: good (used), Offered for sale is a partially overhauled DECKEL FP1 Aktiv universal milling machine, equipped with a 3-axis Heidenhain digital readout TNC 113 and a dividing rotary table with a three-jaw chuck. Thanks to its compact design, this machine is ideal for smaller hobby workshops or garages. Manufacturer: DECKEL Model: FP1 Machine no.: 2102-3314 - Travel X/Y/Z 300 x 160 x 340 mm - Spindle speed range 40–2000 rpm - Stepless feed in all three axes - Rapid traverse in all three axes - Vertical milling head - 100 mm adjustable vertically - Horizontal milling attachment - 3-axis Heidenhain digital readout TNC 113 - Coolant system - Dividing rotary table with a three-jaw chuck Pedpfoxmgguox Agwogu Total power requirement: 1.9 kW Machine dimensions (L x W x H): 1.30 x 1.10 x 1.60 m Weight: approx. 850 kg Price is quoted net, ex-works, loaded. Condition: Used.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Digital Readout Heidenhain, infinitely variable feed, in very good condition Technical Data: >> Year of manufacture: 1978 Machine No.: 2202-10163 >> Fixed angle table >> Spindle speeds: 25 - 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier >> Vertical and horizontal quill - SK40, extendable >> Drawbar system S20x2 >> Weight approx. 1400 kg Accessories and Equipment: >> 3-axis digital readout from Heidenhain >> Coolant system >> Mechanical central lubrication About the machine: Pjdpfx Ajxghtvjgwjgu Offered here is a Deckel FP2 universal milling machine in very good condition. The FP2 has very little backlash, and all spindles move smoothly. The machine runs quietly even at maximum speeds. On this newer FP2 model, the feed rate is infinitely adjustable on all three axes, and each axis is equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and improves precision. You are welcome to view and test the machine under power at our facility.

Condition: good (used), functionality: fully functional, DECKEL FP1 tool milling machine + tool cabinet with contents (tool holders and tools, see photos) Ready for use. Price €9,700 (+ VAT) Disassembly on site and transport are the responsibility of the buyer. Pgjdpfx Agjw Hnx Iswsu

Condition: used, functionality: unexamined, machine/vehicle number: 2820-0520, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, quill stroke: 80 mm, table length: 700 mm, table width: 460 mm, rotational speed (max.): 4,000 rpm, ★★★ CNC Tool Milling Machine Deckel FP3A ★★★ ● Machine Number: 2820-0520 ● Condition: Not tested ● Delivery Terms: Free loaded on truck – Unpacked ● Location: Sprockhövel ● Availability: Immediate ● Payment Terms: Advance payment – by bank transfer ● Internal No.: DÖRK2 ⚙️Technical Specifications ☑️Control: Grundig Contour 3 ☑️Tool Holder: SK 40 ☑️Travel: X 400 mm, Y 400 mm, Z 400 mm ☑️Vertical Quill Stroke: 80 mm ☑️Table Dimensions: 700 x 460 mm ☑️Vertical and horizontal milling ☑️Speed: up to 4,000 rpm ☑️Vertical milling head adjustable on spindle block: 50 mm ☑️Voltage: 380 V / 50 Hz ☑️Power consumption: 14.5 kVA ☑️Coolant system ☑️Handwheel ☑️ALLMATIC HD 160 vice Scope of delivery ✔ ALLMATIC HD 160 vice ✔ Available manuals (see pictures) Dimensions & Weights ● Installation dimensions L x W x H approx.: 3000 x 3000 x 2200 mm ● Weight approx.: 2,000 kg If you have any questions or would like to arrange a viewing, please feel free to contact us. ⚠️Be sure to check out our other listings as well⚠️ Additional notes: ►We expressly recommend collection via direct shipment (freight carrier) ►The goods are sold under exclusion of any warranty Pgedpfxsw Aicyo Agwsu ►Technical data not guaranteed ►Subject to prior sale ❗The sale of the goods is exclusively to businesses❗

Condition: used, For sale: the tool milling machine shown in the photos, manufactured by the German company Deckel, model FP3A. The machine offers manual, semi-automatic, and automatic operation modes. Controlled via G-codes. Control type: CNC 2102 Deckel. Psdpfxoxluu Rs Agwjgu

Condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: 2832-1076, feed length X-axis: 560 mm, feed length Y-axis: 500 mm, feed length Z-axis: 390 mm, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 390 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, total height: 2,265 mm, total width: 2,410 mm, total length: 2,710 mm, table width: 530 mm, table length: 900 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, table load: 800 kg, overall weight: 2,890 kg, input voltage: 380 V, workpiece weight (max.): 800 kg, input current: 44 A, input frequency: 50 Hz, number of spindles: 2, number of slots in tool magazine: 20, Equipment: documentation/manual, Tool holder: SK 40, Control: DECKEL DIALOG 11, with documentation. According to our research, the NPL01 board of the tool changer is defective. Therefore, the automatic tool changer does not work. Otherwise, the machine is fully functional. Operating manual (Machine manual 1), diagnostic manual for the 'DIALOG11' control, machine manual 2 (accessories), programming manuals 1-3, and electrical wiring diagrams are available. Podpowqdtpefx Agwogu The machine can be viewed under power. The machine is bought as is. No warranty.

Condition: good (used), Year of construction: 1975, Cover FP3L with.3-axis Heidenhain digital readout , rigid table , vertical milling head , SK 40 S20x2 spindle mount . Good working condition. Ready for demonstration under power by arrangement. Psdpfx Aeuclbzogwjgu

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 2803-2693, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 32 rpm, quill stroke: 80 mm, quill travel distance: 80 mm, type of input current: three-phase, Equipment: documentation/manual, For sale is a precise and robust Friedrich Deckel FP3NC tool milling machine, year of manufacture 1985, equipped with a Dialog 4 CNC control system. The machine is German-made, renowned for its quality, and is suitable for tool and mould making as well as precise single-part and small-batch production. Technical Data (extract) Model: FP3NC Control: Deckel Dialog 4 Year: 1985 Serial Number: 12767 Main spindle power: 2.0 / 3.0 kW, pole-changeable three-phase brake motor Spindle speeds: 31.5 – 6300 rpm (2 ranges, manually switchable) Tool holder: SK 40 Quill Stroke (manual): 80 / 80 mm (horizontal/vertical) Travel paths: Pgedpfjxlghpjx Agweu X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Feed rate: 2 – 3600 mm/min Rapid traverse: 4000 mm/min Clamping slots in table: 4 slots, 14H7, 63 mm spacing Total weight: approx. 1800 kg Electrical connection: 380 V, 50/60 Hz, connected load 14.5 kVA Rated current: 22 A Control voltage: 24 V Equipment & Control - 4-axis contouring operation with dialog-guided input - 3D linear and circular interpolation, helical interpolation, polar coordinates - Extensive drilling and milling cycles, graphical cycle entry support - “Contour pocket” milling cycle for pocket machining (including irregular shapes and islands) - Subroutine functions, program memory up to 512 kByte - Tool offsets for up to 100 tools - Interfaces for cassette recorder, punch tape reader, floppy disk or Winchester drive (DNC-capable) Condition & Features - Machine is fully functional - High-precision, stable design – ideal for workshops, training or production - Operating manual and technical documentation available - Inspection by appointment possible

Condition: used, Year of construction: 1985, functionality: fully functional, table length: 680 mm, table width: 380 mm, table height: 345 mm, For sale is a Deckel milling table, which was installed on an FP2 milling machine. The angle and rotation functions are fully functional, unfortunately there is no longer a crank. Signs of use on surface recognizable on pictures Pgedpfx Aeuuh Suegweu Dimensions: 38*68 cm Height: 25 cm

Condition: used, functionality: fully functional, machine/vehicle number: 34496, Friedrich Deckel FP1, used, in good condition Podoxivpwopfx Agwogu

Condition: used, Motor output 3 kW total power requirement 3 kw Pedpfx Ajv Nq Skjgwogu Weight 1.400 kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and stepless feed, in very good CONDITION, CE compliant Technical Data: >> Year of manufacture: 1992 Machine No.: 2102-6209 >> Fixed angle table (newly planed) >> Spindle speed: 40 – 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system M16 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system Pgedpfexdi Ivox Agwju >> Machine lamp >> Operating manual, spare parts plan About the machine: For sale is a universal milling machine Deckel FP1 with CE certification, in very good condition. The machine has very minimal backlash and all spindles can be moved easily. Even at maximum speed, the milling machine runs very smoothly. A special feature is that the control cabinet is connected to the machine via a plug, making transport easier. On this newer FP1 model, the feed in all three axes is infinitely variable, and the machine features rapid traverse in those axes as well. Another great advantage is the active 3-axis digital readout. With this Heidenhain path control, you can input dimensions, and the machine will automatically move to them. The FP1 was previously located in a training facility, where it was only used occasionally. The oil was changed, and the machine has been mechanically and electrically inspected. The Heidenhain digital readout makes working easier and even more precise. Take the opportunity to inspect and test this machine under power at our premises.

Condition: good (used), Year of construction: 1975, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle holder, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Pedpfeu Ezb Ejx Agwjgu

Condition: excellent (used), Year of construction: 1985, x-travel 600 mm y-travel 500 mm z-travel 500 mm spindle taper 40 SK turning speed range 18 - 6300 U/min paper band filter 515 mm table load 350 kg air temperature of the exhaust valve 0,001 mm rated capacity boring motor 3600 x 4900 mm hollow in the drive pipe 8 kW Pgjdpfjunt H Rjx Agweu 3300 kg 475 kg total power requirement 380 50 23 kW weight of the machine ca. t dimensions of the machine ca. m Machine from training workshop! ° Engine brake ° Safety handwheels ° 2 x emergency stop switches Accesories: * Rigid angle table * Coolant facility

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 360 mm, For sale is a Deckel FP1 with 3-axis active control system The machine is fully functional and will be checked, cleaned and put into stock in our incoming goods department. Technical data: Digital display 3-axis active digital readout HEIDENHAIN X-axis travel 300 mm Y-axis travel 160 mm Z-axis travel 340 mm Tool holder: SK 40 Milling head type. Vertical milling head Speed range: 40 - 2000 mm/rev Number of steps: 16 Feed X-axis 290 mm Y-axis feed 150 mm Feed Z-axis 330 mm Machine weight 650 kg Machine dimensions 1200 x 1100 x 1800 mm Accessories - Active function in X-, Y- and Z-axis - Coolant device The offer refers only to the machine without tools, this can be negotiated additionally On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Pgedjr H E Uispfx Agwju Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 450 mm turning speeds 31,5 - 1600 U/min tool taper SK 40 quill stroke vertical 80 mm diameter of quill 80 mm table: 1000 x 850 mm total power requirement 4,0 kW weight of the machine ca. 2,6 t dimensions 2,1 x 1,7 x 1,7 m Pgodevlakuepfx Agwsu Universal tool milling machines - Digital display - Angle table - Coolant system - Machine feet

Condition: good (used), Year of construction: 1989, Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 M16 spindle holder. Good working condition, ready for demonstration under power by arrangement. Pgodpjtp Nyfofx Agwju