Used Debut Press Hydraulic for sale (25,365)

Condition: excellent (used), functionality: fully functional, overall weight: 4,000 kg, shelf length: 3000 mm shelf width: 1300 mm water heating Cjdpozgf Tyofx Ailsrd 6 hydraulic cylinders cylinder diameter: 70 mm safety switch – shear pin Weight: 4000 kg

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 16 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, clearance between the columns: 500 mm, oil tank capacity: 60 l, total length: 1,040 mm, total width: 1,030 mm, total height: 2,000 mm, 16 ton hydraulic press for sale in good condition HANS SCHOEN TES 16 two-column hydraulic press Year of manufacture: 1986 Pressing force 160 kN motor power: 3kw 380v 50Hz two-hand operation Installation height: 280 mm Stroke: 100 mm Cedozf Ilcopfx Ailjrd Table width: 440 mm Table depth: 320 mm Machine dimensions: height: 200cm width: 103cm length: 104cm weight: 1000kg.

Condition: new, Year of construction: 2026, machine/vehicle number: 06-26-005, functionality: fully functional, power: 17 kW (23.11 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 360 mm, ram plate width: 750 mm, ram plate length: 450 mm, distance table to ram: 800 mm, total length: 2,200 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic single-column press PYE 160 S1/M >completely overhauled / CE marking with  24 months warranty< from the manufacturer ZEULENRODA PRESSTECHNIK Hydraulic press for forming and assembly operations, pressing force 160 t Complete overhaul with CE conformity Ram stroke: 500 mm Clamping plate, press table: 900 x 580 mm with customer-specific clamping arrangement One-piece C-frame press in steel welded construction Newly manufactured table and ram plate according to customer requirements! Ram plate, twist-proof 3-sided protective guard, on the operator side via light curtain, on the side via sliding guard elements SIEMENS control system -new- Conversion to electronic stroke measuring system Remote maintenance ----- Further services, plant retrofit Control / Operation: • Rapid traverse function • USB interface for data exchange • Touchscreen / visualization SIEMENS • Two-hand control unit with two-channel monitoring of the two-hand synchronous circuit on the press table, (incl. 5m cable) • Limit switches for stroke adjustment are replaced by initiators • Monitoring of the initial stroke after completion • Replacement of the existing 60-V DC solenoids on the pilot control valves with 24-V DC solenoids, including the necessary intermediate plates • The press has an electronic stroke measuring system (including teach-in function and display of the current ram position). This eliminates the mechanical cam switching mechanism. Hydraulic system • Hydraulic safety block for monitoring the closing movement on the main cylinder • Position-monitored directional control valve for the up and down movement of the ram • Replacement of the motors of the main and control pump Cedpfx Aiszf Ht Solord • Replacement of the seals on the main cylinder • Fine filter with contamination indicator • All installation and piping work New documentation including CE declaration of conformity Delivery time / Implementation time: approx. 5 months

Condition: new, Year of construction: 2024, pressure 60 t stroke 400 mm table surface area 800 x 500 mm feed down 4,03 mm/sec feed up 5,82 mm/sec column daylight 820 mm oil pressure max. in the work cylinder 400 bar oil volume 26 l voltage 400 V / 50 Hz total power requirement 3 kW Crodpfx Asvcrmvoiljd weight of the machine ca. 0,55 t dimensions of the machine ca. 1,5 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • Pressure cylinder moveable horizontally, • Working table hydraulical adjustable, • Cylinder Ø 150 mm, piston base Ø 85 mm.

Condition: new, Year of construction: 2024, feed under pressure 2,7 mm/sec pressure 100 t stroke 400 mm table surface area 920 x 560 mm feed down 4,25 mm/sec feed up 8,22 mm/sec oil pressure max. in the work cylinder 385 bar oil volume 26 l Crsdpovcrm Aofx Ailsd diameter of piston 125 mm column daylight 920 mm voltage 400 V/ 50 Hz total power requirement 4 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,7 x 0,9 x 2,1 m • unused workshop press, (Demonstration machine) • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjusted in height, • Cylinder Ø 175 mm, piston base Ø 125 mm.

Condition: used, Year of construction: 1996, Technical details: pressure: 6,3 t throat: 170/180 mm stroke: 310 mm power capacity: 3 kW dayligth: 775 mm Crsdpfx Aistxdmwelsd weight of the machine ca.: 1,5 t clamping table: 470 x 330 mm table height over floor: 800 mm C-Type 1 Station *

Condition: new, Sicmi PSV 70 M - Hydraulic workshop press with a servomechanical handwheel for cylinder adjustment The PSV model is particularly suitable for sheet metal straightening, inserting bushings, or sheet metal inserts. The lowering and raising of the cylinder is controlled by a handwheel with a servomechanism, which allows for adjustment of the cylinder position to within hundredths of a millimeter, thus ensuring absolute precision. The cylinder stroke is 350 mm and exerts a maximum pressure of 270 bar. Since the approach speed of the cylinder is 10 mm/s or less, the operator can operate the electro-hydraulic press with only one hand. The platform is mobile, and its vertical movement is achieved using the main cylinder, which simplifies sheet metal processing and pressing operations. The hydraulic workshop press with a servomechanical handwheel is also available in a version with a transverse cylinder, which allows for transverse movement of the main cylinder using a handwheel. This solution therefore allows you to always work in the center of the cylinder axis, avoiding processes that could damage the hydraulic press. Correct positioning and locking of the cylinder in the desired position is ensured by a specially designed system. The frame of the PSV hydraulic workshop press is made of an extremely rigid, electro-welded steel construction, which has been specially developed to ensure maximum robustness and stability. Optional equipment: System for preventing cylinder rod torsion Support plates Cjdpezcphbefx Ailord Pair of V-shaped prisms

Condition: used, Year of construction: 2001, pressure 70 -800 kN chamfer lenght 2505 mm distance between columns 2125 mm Cedpfx Asyz Dgwoilord Control OP 2000 controlled axis 7 throat 420 mm stroke 200 mm dayligth 470 mm table width 60 mm table height 960 mm ajustment speed 100 mm/sec working feed 10 mm/sec return speed 100 mm/sec weight of the machine ca. 6,3 t Patented Amada technology ensures absolutely correct bending results without bombing device

Year of construction: 1980, operating hours: 7,663 h, condition: used, pressure 320 t Crsdpfod Ih Nrsx Ailed throat 800 mm stroke 630 mm distance between table / ram max. 1000 mm ram head dimension 710 x 600 mm table-size 800 x 1200 mm work height max. 1015 mm quantity of oil 1100 l Number of working hours 7663 h weight of the machine ca. 15 t dimensions ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available.

Condition: new, Synchronized hydraulic bending press MVD Available in stock, subject to prior sale! Model: I Bend D 4100/320 ESA W660 color video CNC control Number of controlled axes: 7 (Y1-Y2-X-R-Z1-Z2-X5) Motorized WILA back gauge Multi-beam barriers with NEW DSP LASER electronics High-speed motorized rear stop UNIMEC (Made in Italy) Cjdpfx Aofh N Ageilord GIVI MEASURES optical sensors (Made in Italy) Bending length: 4100 mm Tonnage: 320 tons Throat depth: 510 mm Stroke: 410 mm Opening: 635 mm Includes upper tooling and lower die from ROLLERI

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, AXA ELECTRO-HYDRAULIC PRESS WITH MOVING CYLINDER. Capacity: 150 tons. Dual automatic speed with rapid traverse. Special electrical panel with fast/slow switch for one-hand operation. Moving cylinder with 816 mm traverse stroke. Internal daylight from shoulder to shoulder: 1500 mm. Ram stroke: 300 mm. No. 01 AXA PM150/15 ELECTRO-HYDRAULIC PRESS WITH MOVING PISTON – NEW CONDITION “CE” MARKED. -DUAL AUTOMATIC SPEED WITH RAPID TRAVERSE. -COMPLETE WITH A SPECIAL ELECTRICAL PANEL FOR FAST/SLOW SWITCH FOR ONE-HAND OPERATION. -TECHNICAL DATA SHEET ATTACHED. -Applied force: 150 tons -Cylinder stroke: 300 mm -Internal daylight: 1504 mm -Approach speed (rapid traverse): 1450 mm/minute -Working speed (slow): 105 mm/minute -Cylinder ram stroke: 300 mm -Cylinder ram diameter: 110 mm -Stem diameter: M30 -Tank capacity: 50 liters -Max. pressure: 350 bar -Voltage: 400 V, Frequency: 50-60 Hz -Power: 3 kW motor -Max. current consumption: 7.3 A Cjdpfx Aijlruhdolord -Weight: 1500 kg GALTECH distributors. • 2MP block. • No. 2 VIVOIL external gear unidirectional pumps. One for rapid approach and return (calibrated at 20 bar), and one with adjustable pressure controlled by a handwheel to set the required power. • Maximum pressure valve with mechanical lock to prevent overpressure. • Standard pressure gauge to display the applied force. • INTECH electrical panel certified according to current regulations and with independent CE marking.

Condition: new, Year of construction: 2025, OMCN 100-ton electro-hydraulic press, Model 164/R Made in Italy DOUBLE-SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH PRESSURE GAUGE Hydraulic press with rapid-action motor, pressure gauge, and double-speed hydraulic power unit achieved with a vane pump for rapid approach and return, and with an axial piston pump for the working phase. Equipped with a calibration valve and a three-position control distributor (forward, idle, return). The machine is complete with oil. Supplied with a winch for lifting the worktable. The ram is made of special steel, treated, and chrome-plated. The machine is equipped with two-hand control and synchronization as per current regulations. Complete with protective panels, rear and side. Cedpfsfh R Nysx Ailjrd CE approval, including electromagnetic compatibility. Ram stroke: 310 mm Internal width: 1,010 mm

Condition: new, Year of construction: 2025, OMCN P30/SA hydraulic press with a 2-speed hand pump, 30 tons. OMCN P30/SA hydraulic press with manual operation via a two-speed hand pump and a robust base frame that provides maximum stability and minimal footprint. Thanks to the perforated frame, the support base is height-adjustable in 9 different positions, allowing the press to be adapted for working with parts of various sizes. The winch allows for convenient and quick lifting of the worktable. + faster approach + precision Cedpfx Asklyvteilerd Essential in workshops and in the industrial sector, perfect for pressing metal objects, for example, during the assembly of mechanical components, the fitting of bearings or pulleys onto shafts. Made in Italy and CE certified, this press is manufactured with robust materials that guarantee reliability over time and is capable of generating a force of 30,000 kg. Footprint: 2180 x 1300 x 600 mm Weight: 280 kg Pressure: 30 tons Distance between uprights: 695 mm Piston stroke: 190 mm Piston diameter: 60 mm

Condition: new, Year of construction: 2025, functionality: fully functional, The motorized hydraulic press P50MR guarantees high performance and maximum precision thanks to its robust structure, entirely laser-cut without welds in the areas of greatest stress. It is equipped with an immersion motor power unit 400 [V] 50-60 [Hz], a rapid approach and return pump calibrated to 20 [bar], plus an adjustable pressure pump with a handwheel to achieve the required power. It is also equipped with a maximum pressure valve with mechanical locking to prevent overpressure, and the pressure gauge (standard) allows for extremely precise calibration of the power output. Power: 50 tons Distance between inner uprights: 800 mm Approach speed: 1800 mm/min Working speed: 350 mm/min Rapid return flow rate: 26 l/min Slow return flow rate: 5 l/min Cylinder stroke: 300 mm Cylinder bore: 135 mm Rod diameter: 70 mm Rod thread diameter: M30 Tank capacity: 50 liters Maximum pressure: 350 bar Voltage: 400 V Frequency: 50-60 Hz Cedpfx Aiefvhqgsljrd Motor power: 3 kW Maximum absorbed current: 5.5 A Weight: 500 kg Dimensions: 1550 x 800 x 1965 (h)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Shelf length: 3000 mm Shelf width: 1300 mm 6 hydraulic cylinders, 75 mm Clearance: 400 mm Water heating Year of manufacture: 2001 Weight: 3200 kg Credezfgarepfx Ailed Overall length: 440 cm Overall width: 190 cm

Condition: good (used), Description PEM Serter 4, very good condition Credpfxjzfbu Do Ailsd The machine can process insertion fasteners from all manufacturers up to 53 kN (from M2 to M8 in steel and up to M6 in stainless steel). Quick tool change, ideal for small batch sizes. This machine has an additional manual QX system as special equipment, which enables quick switching between 4 different tools. The QX system is purchased separately as an accessory. The individual price is €2,000. The one-hand operation of this tool allows an operator to install four different types and/or sizes of fasteners with a single setup. The machine includes a laser pointer, stroke counter, and a robust, lockable cabinet for storing tools and accessories. Self-collection only, no delivery. If interested, please contact us.

Condition: used, Year of construction: 1980, pressure 6,3 t Cjdoy Ig Nbjpfx Ailord stroke 250 mm throat 150 mm dayligth 450 mm table surface area 330 x 270 mm table height over floor 970 mm ram surface 240 x 100 mm oil volume 30 l power requirement 1,5 kW dimensions (WxDxH) 0,9 x 1,3 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (make Pilz), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 1985, pressure 6,3 t stroke 250 mm throat 150 mm dayligth 440 mm table surface area 330 x 270 mm table height over floor 970 mm ram surface 65 mm oil volume 30 l power requirement 1,5 kW Cedpoyfwvljfx Ailjrd dimensions (WxDxH) 0,8 x 1,3 x 2,4 m with oil-hydraulic drive, light-guard (make Sick C 4000), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation

Condition: used, functionality: fully functional, ---IMAL hydraulic press brake, 3000 x 85 tons (red and white), 4 axes, 500 mm throat depth. Dimensions: 400 x 180 x 260 (H) cm, weight 7,000 kg (70 cwt). Credowyndwspfx Ailsd

Condition: used, Year of construction: 1987, machine/vehicle number: 10064, functionality: fully functional, operating hours: 90,041 h, input voltage: 380 V, type of input current: three-phase, pressing force: 200 t, stroke length: 300 mm, table width: 800 mm, table length: 1,290 mm, table height: 1,000 mm, ram plate width: 800 mm, ram plate length: 1,300 mm, oil tank capacity: 1,300 l, total length: 2,330 mm, total width: 1,600 mm, total height: 4,150 mm, overall weight: 21,000 kg, control cabinet height: 2,070 mm, control cabinet length: 1,500 mm, control cabinet width: 400 mm, DGUV certified until: 06/2026, die cushion stroke: 70 mm, distance between side stands: 420 mm, installation height: 600 mm, Equipment: safety light barrier, 1x tool safety input Cedpfxsyvgrhj Ailord Two-hand control panel with emergency stop 8x hydraulic clamps Electrically adjustable depth stop Cut stroke damping Ejector - draw cushion for ram and press table Electronic stroke and pressure measurement system Hydraulic main drive pump completely overhauled with a new drive motor

Condition: refurbished (used), MAE Hydraulic Press 25 Ton Details Manufacturer: MAE. Type: HY-S25. Condition: Refurbished. Specifications Press force: 25 tons Frame type: C-frame Drive: Hydraulic Stroke: approx. 400 mm Table surface: approx. 800 × 500 mm Motor power: approx. 5.5 kW Hydraulic tank capacity: approx. 140 liters Crjdpfjzd Shfsx Ailed Operation: Two-hand operation. Dimensions Length: approx. 950 mm. Width: approx. 1700 mm. Height: approx. 2900 mm. Weight: approx. 4000 kg.

Condition: refurbished (used), Year of construction: 1987, machine/vehicle number: 3163, functionality: fully functional, pressing force: 25 t, stroke length: 100 mm, table width: 360 mm, table length: 220 mm, Equipment: safety light barrier, Schoen hydraulic double-column press NH 25 (3163) completely overhauled machine – year of manufacture 1987/2026 Pressing force 250 kN Installation height: 280 mm Stroke: 100 mm Table (width): 360 mm Table (depth): 220 mm The machine is undergoing a general overhaul new control system new light curtain Csdezd Akqopfx Ailjrd hydraulic system revised

Condition: excellent (used), Year of construction: 2024, machine that shapes metal or material under very high pressure Crsdpfsy A Hv Djx Ailjd

Condition: good (used), JDS hydraulic press Csdpeiki Ahofx Ailerd Bed: 505 x 510 mm Dimensions: 140x140x285 cm LxWxH

Year of construction: 2023, condition: used, Pressing force 53 t stroke 300 mm control Siemens Pneumatic system pressure 6 bar Maximum supply pressure of the pneumatic system 10 bar Pressure in the hydraulic system 255 bar Crodjzbvm Ispfx Ailod Dimensions (HxWxD) 3.200 x 2.500 x 2.350 mm weight 8.000 kg In our assessment, the bushing press is in like-new condition. Technical features: - Bushing pressing including plastic deformation - TOX pneumatic-hydraulic actuator with 53t pressing force at 6 bar - 300mm stroke - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.