Used Cutter 125 Mm for sale (77,938)

Condition: new, Year of construction: 2026, Rotary machine vices, recommended as basic equipment for milling, drilling and planing machines, etc. Lightweight design makes these very popular. Vice features Cast iron rotary QH machine vice, useful while working with grinding, milling, drilling and planing machines, etc. Made of high-quality cast iron Equipped with swivel base with 360o pitch, 1o gradation Body, along with the moving jaw, is made of high-quality cast iron Top side of the lead screw secured from dirt and chips Possible disassembly of the swivel base Gedpfjvxgm Aox Ad Isbp While replacing inserts it is advised to machine their surfaces attached to the vice in order to achieve the accuracy parameters specified in the technical documentation

Condition: new, Year of construction: 2026, Our offer includes a wide range of machine vices: angle, precision and grinding. All of them are made of high-quality materials, providing durability and versatility. Vice features Cast iron rotary QH machine vice, useful while working with grinding, milling, drilling and planing machines, etc. Made of high-quality cast iron Equipped with swivel base with 360o pitch, 1o gradation Body, along with the moving jaw, is made of high-quality cast iron Top side of the lead screw secured from dirt and chips Possible disassembly of the swivel base Gbsdpfx Aevxghmsd Isp While replacing inserts it is advised to machine their surfaces attached to the vice in order to achieve the accuracy parameters specified in the technical documentation

Condition: new, Year of construction: 2025, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, working length: 1,250 mm, working width: 1,250 mm, Equipment: CE marking, cooling unit, documentation/manual, P class = machining area X 1250 mm x Y 1250 mm x Z 100 mm High-precision linear motor axis system with 6 kW laser power (* Prices vary depending on the configuration and laser power; this is a brand-new laser machine manufactured by us.) Laser machining: simple and highly precise – laser cutting with high speed and quality. Gbsdpfx Ajk Ran Eed Iep

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 700 mm, roll pitch: 120 mm, total width: 790 mm, total height: 110 mm, total length: 36,125 mm, conveying length: 36,125 mm, construction width: 790 mm, construction height: 110 mm, axle spacing: 120 mm, TAF article number: 1000004055 (241076.4) Manufacturer: unknown Year of manufacture: unknown Overall dimensions: approx. 36,125 x 790 x 110 mm (LxWxH) Cheek width: 790 mm Cheek height: 100 mm Conveyor length: 36,125 mm Conveyor width: 700 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 120 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK Godpfx Adsuiha To Ijbp

Condition: new, Year of construction: 2026, SL class = machining area X 1250 mm x Y 2500 mm x Z 100 mm Gbjdpfxek Ranzs Ad Iop High-precision linear motor axis system with 6 KW laser power (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Laser processing easy and high-precision - Laser cutting with high speed and quality

Condition: ready for operation (used), Very well-known and reliable Cauhe die-cutting machine, format 1200x1600 mm, year of manufacture 1996, from second owner. Gbedpfjxz Ncbjx Ad Iep

Condition: new, Technical data for the pallet racking crossbeam: Racking system: Stow Type: Pal Rack NS Included in the scope of delivery: 01x Pallet racking crossbeam, new Material color: RAL 2004 orange Box profile: 160 x 50 mm Crossbeam type: PNB0436 Clips: 4 HK (hooks) Clear width: approx. 3,300 mm Max. load per pair of crossbeams: 4,500 kg with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting out Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any further transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Gbjdpfszlhr Aex Ad Isp

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Gedpfszkmi Djx Ad Isbp Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: good (used), Included in the scope of delivery: 1x deep-profile frame, used Material color: Sendzimir galvanized Overall length: approx. 1,250 mm for shelf depth: 1,200 mm clear span: approx. 1,100 mm crossbar support: approx. 50 mm support angle: L: approx. 80 x 80 mm overall width: approx. 860 mm internal width: approx. 855 mm material thickness: approx. 3 mm Side frame: Length: approx. 1,245 - 1,070 mm tapering towards the front Width: approx. 200 mm Height: approx. 195 mm End stop: Width: approx. 200 mm Height: approx. 195 mm Your contacts within our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Gedpor Dr Suefx Ad Ijbp General information about the item: This is a used item; scratches, dents, and signs of wear may be present. This item is offered for collection only. Any further transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: ready for operation (used), Used can manufacturing line for the production of 73 mm or 99 mm cans. Several compositions of machines are available. Consisting of: - Krupp Sdvt duplex slitter Gbodpfxjvy Tyxe Ad Isp - Soudronic FBB400 welding machine - Soudronic inside powder coating system - Outside lacquering system - Frei curing oven - Metalbox 65d spin flanger - FMI A304 beader - FMC 652 seamer

Condition: ready for operation (used), Used can manufacturing line for the production of 153 mm milk powder cans. Optional can be quoted for other can sizes as well or can be set to 153 mm food cans. - Krupp Sdvt duplex slitter - Soudronic SBW150 welder - Free outside lacquer - Precision tools gas curing oven - Blema KEBS 160 flanger Gbsdovy Txzjpfx Ad Isp - Klinghammer SIA 180 beader - Angelus 50p seamer

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Gbedowc Nrnepfx Ad Ijp Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: used, Used chamber filter press Andritz/Netzsch 1500x2000 with 125 plates Quantity: 2 available Press dimensions: Length: 13455 mm x Width: 3125 mm x Height: 4635 mm Empty weight: 51600 kg Filter area: 459 m2 Filter area after expansion: 559 m2 Press volume: 4989 l Press volume after expansion: 6080 l Cake thickness: 25 mm Gbjdpfxszlb D Se Ad Ijp

Condition: excellent (used), For sale is a Schimanek Type 70 manual bookbinding guillotine, manufactured in West Germany. This is a robust machine designed for the precise cutting of paper, cardboard, and other bookbinding materials. The device is equipped with a long cutting arm that provides high cutting force, an adjustable back gauge with a scale, and a stable worktable. The massive construction guarantees accuracy and long-term durability. Technical specifications: Manufacturer: Schimanek Model: Type 70 Serial number: 24256 Gbsdpjziwnhofx Ad Iep Country of manufacture: West Germany Type: manual bookbinding guillotine Maximum cutting width: approx. 700 mm Adjustable back gauge with scale Manual material clamping Robust metal construction Condition: used Applications: paper cutting, cardboard cutting, corrugated board cutting, bookbinding work, printing houses, graphic design studios. The machine is sold in the condition shown in the pictures.

Condition: excellent (used), For sale: a Karl Tränklein Case Bender, a machine designed for shaping and bending the spines of hardback book covers. The device gives the covers the appropriate curvature, ensuring a perfect fit to the book block. The machine is equipped with adjustable rollers, allowing for adaptation to different cover thicknesses. The robust cast iron construction ensures high precision and long-lasting durability. Technical data: Manufacturer: Karl Tränklein Type: Case Bender / spine forming machine Working width: approx. 600 mm Adjustable roller pressure Stable cast iron construction Electric drive Gbsdpfx Ajziwnbod Iop Work table Condition: used Applications: Production of hardback books, Bookbinding, Printing companies, Graphic arts companies, Production of albums, catalogs, and covers.

Condition: good (used), total length: 1,000 mm, total width: 600 mm, total height: 2,500 mm, load capacity per storage section: 150 kg, TECHNICAL DATA • Manufacturer: META • Frame height: 2,500 mm • Shelf width: 1,000 mm • Frame depth: 600 mm • Shelf load capacity: 150 kg • Number of shelves per bay: 6 • Surface: galvanized • Plug-in assembly • Condition: used Large quantities available immediately. Graduated prices net per piece plus VAT: Basic bay: Gedpeuk E Thjfx Ad Iobp 1 - 5 bays: €54.00 6 - 20 bays: €52.38 21 - 50 bays: €50.76 From 51 bays: €49.14 Add-on bays: 1 - 10 bays: €39.00 11 - 25 bays: €37.83 26 - 75 bays: €36.73 From 76 bays: €35.69 Ex works Nordhorn. YOUR CONTACTS: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We will be happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipment is possible for an additional charge. The additional costs depend on the delivery location and the scope of the shipment and can be requested individually from us. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. The price is understood to be the unit price/net price or as specified in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK in Nordhorn deals in new and used products in the areas of warehouse logistics, conveyor technology, storage platforms, textile storage, and machines for retail, industry, and trades. We offer you attractive used offers from various manufacturers/brands on an ongoing basis. If you have any questions, please do not hesitate to contact us. Four wins – The success factors of DLK – Storage technology | Levelmaker® | Logistics | Solutions

Condition: used, total length: 1,220 mm, total width: 400 mm, total height: 2,000 mm, load capacity per storage section: 150 kg, We are offering used shelving systems for sale here. Gsdjy Dgglspfx Ad Iebp TECHNICAL DATA Manufacturer: Nedocn Type: Shelf N Frame height: 2,000 mm (new product) Shelf: 1,220 x 400 mm (used product) Load capacity per shelf: 150 kg Number of levels: 5 Plug-in assembly Cross brace Graduated prices net per piece, plus VAT: Base units: 1 - 5 units: €41.50 net per piece 6 - 20 units: €39.43 net per piece 21 - 50 units: €37.35 net per piece 51 units and up: €35.28 net per piece Add-on units: 1 - 5 units: €29.50 net per piece 6 - 20 units: €28.03 net per piece 21 - 50 units: €26.55 net per piece 51 units and up: €25.08 net per piece PROJECT DESIGN Our sales team will be happy to create a non-binding offer tailored to your specific needs. TRANSPORT & ASSEMBLY We will gladly assist you with the transport and assembly of the goods. TERMS OF PAYMENT Payment terms will be agreed upon in the event of an order. The price is quoted as a unit price/net price or as stated in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK, based in Nordhorn, trades in new and used products in the areas of warehouse logistics, material handling technology, storage platforms, textile storage, and machines for the retail, industrial, and craft sectors. We continuously offer interesting used products from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us. Win-win – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: like new (used), Cutter CFS GEA CutMaster 500 VACUUM After capital renovation 3 months warranty for parts Gjdoyn Dy Nepfx Ad Iebp

Condition: excellent (used), Taper shank chuck (28319) Gbedpfx Aoiuvumed Ijp Diameter 290 mm Cylindrical shank 78 mm Taper 6 mm Weight 54 kg

Condition: excellent (used), Splash guard Diameter 390 mm Wheel offset 6 Bolt circle diameter 135 mm Weight 56 kg Gbsdpfxefm Tqze Ad Iep

Year of construction: 2000, condition: excellent (used), Splash guard Diameter 400 mm Godpsd Tyu Rjfx Ad Isbp Taper 105 mm Bolt circle 135 Estimated age

Condition: good (used), Grinding wheel Diameter 500 mm Gbedpfxscx N Ate Ad Ijp 475 rpm.

Year of construction: 2011, condition: excellent (used), Lathe chuck Gbodjd Na Spopfx Ad Isp Diameter 330 mm Height 100 mm Weight 57 kg Year of manufacture is estimated.

Condition: used, Mounting block Gbodpfxsc Rmpue Ad Iep 2 available 1230 x 1230 mm Height 560 mm Distance between holes 60 mm

Year of construction: 2010, condition: excellent (used), Splash guard 24830 Diameter 500 mm Gbedpfjd Tyu Ejx Ad Iep Height 115 mm Taper 120 mm Estimated age