Used Corrugator for sale (232)

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: TK4S35322107121, working width: 3,200 mm, cutting speed: 90,000 mm/min, sheet thickness (max.): 50 mm, working length: 3,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Suitable materials: corrugated cardboard, cardboard, foam boards, films, label material, textiles, honeycomb panels, and other non-metallic materials Previous area of application: textile cutting Working area: 3,500 x 3,200 mm Max. material thickness: 50 mm Max. working speed: 1,500 mm/s MACHINE DETAILS Condition: disassembled Rated voltage: 380 V Mains frequency: 50/60 Hz Rated power: 24.38 kW EQUIPMENT - Vacuum table - Powered rotary tool - Drag knife Ibsdpjzpxg Ejfx Ap Hsb - Pin tool - Camera system - Conveyor system - Roll loading device - Workstation with computer and software

Year of construction: 1998, condition: good (used), Material separator, material selector, filter system, material separator, metering rotary valve, rotary valve, metering valve, rotary valve, conveying technology -Manufacturer: Höcker Polytechnik, material separators for paper, cardboard, corrugated board ... Iedex Td Iljpfx Ap Hjbb -Type:PMA-U -Drive: 0.75 kW -Inlet: 590 x 610 mm -Injection air volume: max. 12000 m³/h -Technical data: see photo of the nameplate -Transport dimensions: 2020/1340/H2000 mm -Weight: 878 kg

Condition: used, Platform trailer, heavy-duty trailer Industrial trailer with 2-axle swivel steering Manufacturer: PLAN, Type 11 Chassis No: 31361-1 = Year of manufacture 03/2015 Chassis No: 31361-2 = Year of manufacture 03/2015 Iodpfxoiiumre Ap Hebb Payload: 20000 kg Unladen weight: approx. 3760 kg Permissible total weight: 23760 kg Platform height: 850 mm Platform length: 5000 mm (between the tarpaulin frame) Platform width: 2500 mm Overall length: 6100 mm (without drawbar) Overall width: 2500 mm Tires: Ø 559 x 300 mm (solid rubber tire 559/305-406.4) - 4 wheels with 2-axle swivel steering - Tracking - Swiveling drawbar, drawbar can be bolted on at the front or rear - Drawbar with towing eye size 40 mm diameter - Small turning radius - Very stable outer frame made of U-beams, height 280 mm, width 95 mm - Very stable steel floor made of 10 mm corrugated sheet - Tarpaulin superstructure with steel base frame, can be loaded from the side, max. transport height 2300 mm under the tarpaulin Length for transport: 610 cm (with folded-up drawbar) Width for transport: 250 cm Height for transport: 330 cm (with tarpaulin superstructure) Weight per trailer: approx. 3760 kg Good condition 2 units available Price quoted per trailer

Condition: used, Used Xante Excelagraphix 4200 for sale. Mechanically functional. The printer is currently out of ink and has been idle for almost a year. Print method: 5 Memjet drop on demand thermal inkjet print heads Print width: 1067 mm Ink colors: five channels per printhead: CMYKK Print resolution: 1600 dpi x 1600 dpi or 1600 dpi x 800 dpi Print speed: up to 416 pcs. (1067 mm x 609 mm sheets per hour) Sheet feed: manual Isdpfx Aexhbw Rjp Hjbb Ink type: dye-based aqueous inks Ink cartridges: 5 ink cartridges (C, M, Y, K, K) - 2 liters Media thickness: corrugated material thickness up to 15.9 mm RIP: iQueue

Condition: ready for operation (used), Year of construction: 2011, A complete pasta line with 2x Cappelletti forming sets is available. 1) Pasta Technologies Group SRL dosing and mixing unit for pasta ingredients such as flour, water, and micro-ingredients. 2) Combined mixer-sheeter Pasta Technologies Group SRL MASA 540, year of manufacture: 2022, dough sheet thickness range: 7mm–8mm, dough sheet width: 540mm, corrugated rollers: 3, pairs of smooth rollers: 1. 3) 2x forming machines GEA/Pavan MRW 540, year of manufacture: 2011, pasta types: Ravioli/Cappelletti, production output Ravioli/Cappelletti: 140/120 strokes/min, dough sheet width: 540mm, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1300mm, weight: approx. 1200kg, filler frame weight: approx. 210kg. Includes 2x Cappelletti tools 3D. 4) Double conveyor belt and waste recovery unit. 5) Dough scrap return system Pasta Technologies Group SRL RS100 with cyclone. 6) Complete system control and management by Pasta Technologies Group QEHD. Documentation available. An on-site inspection is possible. Ibodpfx Apjw Dfgko Hsb

Condition: ready for operation (used), Fully Automatic Flatbed Die-Cutter, Non-Stop Feeder, Automatic Vacuum Plate, Double Sheet Cleaning Station, Turn Die Cutting Frame, (Batch Delivery) Non-Stop Delivery With Belt, Ibedswly D Hspfx Ap Hob Cutting Force 300 TON, Up to 4.500 Speed/H, Working With Corrugated Cardboard Of Thickness Max. 9mm, Min. 0,9mm, Format: Max. 1055x1575mm, Min. 400x600mm, Standard Accessories Bobst SPO 1575 EG 1980, fully rebuilted 2015, chain changed 2024.

Year of construction: 2006, condition: ready for operation (used), Specification Detail Die cutting and stripping unit Max. Sheet Size 1050 x 750 mm Min. Sheet Size 450 x 370 mm Ibodpjyha N Hjfx Ap Hsb Max. Die Cutting Area 1040 x 730 mm Max. Speed 7,500 sheets per hour Max. Pressure 250 tons Stock Range 100 gsm paper to 2000 gsm cardboard; up to 3 mm corrugated board Min. Gripper Margin 4 mm Machine Weight 18,000 kg

Condition: used, maximum load weight: 32,750 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 05/2025, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,739 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle TMT Walking Floor Semi-trailer, 92 cbm First registration 05/2025 Mileage only 75,854 km Internal dimensions (L x W x H) 13,600 x 2,470 x 2,650 / 2,825 mm Axle track 1,310 mm Unladen weight 7,870 kg Saddle height 1,150 to 1,180 mm Chassis made of S700 MC steel, hot-dip galvanized SAF axles with large disc brakes, 430 mm, reinforced "CD" version WABCO trailer EBS with anti-roll protection RSS 1st axle: Lift axle 3rd axle: Steerable axle Air tank: Aluminum Tire size: 6x 385/65 R 22.5 Jost full-load swivel saddle Lighting: ASPÖCK full-LED 2 x LED work lights Toolbox 800x500x500 mm CARGOFLOOR sliding floor with 21 planks, material thickness 8.0 mm, corrugated Full lining with sliding bearings Control system with wireless remote control Rear end plate made of stainless steel 2 crossbars, reinforced version. Only 2 crossbars allow for better and easier loading! Reinforced tarpaulin roof Rear crossbar can be tilted LaSi code according to EN 12642 XL Ijdpfszayidox Ap Hobb "Rollfix" protective cover for the left side wall, extending over the entire length with a retractable mechanism RENTING is the new BUYING; with us, it is also immediately available in a full-service rental agreement.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, 1 used steam boiler ----- - with corrugated flame tube and dished ends - Manufacturer: STANDARD Heating surface approx.: 240 sqm Capacity: 13.4 t/h Previous operating overpressure: 14.0 bar Iedpsxtndnefx Ap Hsbb Test overpressure: 18.2 bar Water content approx.: 18,160 l Year of manufacture: 1988 Equipped with Saacke natural gas burner type DG 80, gas control line, control cabinet, feed water pump, and existing coarse and fine fittings.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, There are 14 pieces of steep conveyor belts with corrugated edge for sale, the price is per piece; A few data about the conveyor belt ; L: 2000mm NB: 270mm GB: 470mm Belt speed constant : 4m/min Cleat height : 30mm Corrugated edge : 30mm high Hopper in the lower area Iodpfx Aju Smliop Hebb Heat resistant belt

Condition: excellent (used), Year of construction: 2018, working width: 1,200 mm, total length: 12,500 mm, 1 point 2 points boxes 3 points boxes Cardboard from 210-800 gsm Ibodpfxjtq E U Se Ap Hsb Corrugate A/B/E Crash lock 300 meter per minute Max width open box 120cm Min width open box 5cm alignment unit unit for 1-3th creasing Crash lock Gluing unit KAS C1000 3 Guns unit 2end and 4th creasing Remote control Lenght 12.5 m 12KW

Condition: new, functionality: fully functional, empty load weight: 770 kg, maximum load weight: 2,730 kg, overall weight: 3,500 kg, loading space length: 5,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, Product information "HAPERT AZURE H2 3.5t 5x2m lattice extension with 13-inch parabolic suspension" Extremely sturdy high-loader from trailer manufacturer HAPERT, model AZURE H-2 3500kg 505x200. Its foldable aluminum side walls allow for versatile use. Pallets can be easily loaded from the side or rear. All flaps and corner stanchions are removable, quickly transforming the loader into a platform. The standard equipment of the Hapert flatbed trailers is very comprehensive, including sturdy aluminum side walls, a pendulum and removable corrugated mesh extension, a low 13-inch chassis, parabolic suspension with shock absorbers and a 100 km/h rating, center stanchions, eccentric locks, tie-down eyes, net hooks on the hinge bases, an automatic support wheel, an extremely sturdy welded and hot-dip galvanized steel frame, and a reinforced and bolted V-drawbar. Technical specifications can be found below. We also offer a wide range of trailer accessories for Hapert car trailers. Higher side walls, corrugated mesh extensions, side wall extensions, a raised frame for the front, loading ramps, rear supports, 100 km/h approval, a tool box, tie-down straps, and a trailer lock are available for an additional charge. ... ----- You can also get: · Financing · Leasing (businesses only) · Consulting · Delivery throughout Germany (except islands) · Accessories · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repairs · TÜV inspection for car trailers Ahrens Car Trailer Center, Moordeicher Landstraße 37, 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 a.m. - 5:00 p.m. Ibsdpfx Aewiwggop Hsb

Condition: as good as new (ex-display), Year of construction: 2025, Complete solution for transporting bulk goods such as shredded goods, wood chips, wood pellets, granulate, etc. Aluminum angled conveyor incl. substructure Ibodsi Igdfopfx Ap Heb horizontal range 2,500mm (adjustable) Rising range 5,000mm (customizable) Angle in the bend 35,40 or 45° Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 500mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x25mm T-50 lugs - 400mm pitch 2-layer particularly laterally stable Fixed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Year of construction: 2023, condition: as good as new (ex-display), Aluminum angled conveyor belt with substructure including adjustable feet and machine feet for levelling Iodpfok Scxijx Ap Hjbb horizontal range: 2,500mm Rising area: 800mm Lead angle in bend: 40° Total conveyor length: 3,100mm Discharge height: 700mm Height of horizontal: 320mm PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Drive: motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Drive etc. ready for connection, motor 2 pcs. corrugated edges 80x45mm 2-layer particularly laterally stable Usable width 370mm

Condition: ready for operation (used), Year of construction: 1989, MACHINE: BOBST Domino 85-M Manufacturer: BOBST SA Model number: Domino 85-M Machine type: Folder-gluer Year manufactured: 1989 Machine Format: 850 x 800mm Ibjdpfxex S Uuyj Ap Hjb Technical Specifications: Convertible stock Solid up to 700 g/m2 Corrug. up to B flute Thickness 15 mm Sizes: standard boxes (blanks open) Width max 850 mm Width min 56 mm Length max 800 mm Length min 60 mm Drive System Inching speed 8 m/min Operating speed 20 - 400 m/min Crash lock bottom device Special version for 4/6 corner gluing HHS gluing system with 3 guns N. 2 gluing points disc system Belt pressing system delivery Main motor 21 kW Dimensions Length 14120 Width 2200 mm Weight 7000 - 10000 kg

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: WFB2500x2400, conveyor belt length: 4,900 mm, conveyor belt width: 290 mm, conveyor belt speed: 400 mm/s, total length: 4,200 mm, total width: 540 mm, total height: 2,000 mm, overall weight: 250 kg, discharge height: 2,000 mm, power: 0.55 kW (0.75 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, motor manufacturer: GEMOTEG, Equipment: type plate available, Complete solution for conveying bulk material such as wood chips, wood pellets, shredded material, granulate, etc. Aluminum angled conveyor belt incl. substructure Horizontal area 2,500mm Rising area 2,400mm Angle in bend 45° Feed height: 300mm Discharge height 2,000mm Total conveyor belt length measured on the floor: 4,200mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Drive: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz Protection class IP54 Ibodpferwi D Eox Ap Heb Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Shaft edge: 50x35mm 25 pcs. T-40 cleats - 396mm pitch 2-ply especially transversely stable Useful width: 290mm, results as follows: Queranordnung 70+35+290+35+70mm ONLY WHILE STOCKS LAST!!! All our prices are net prices plus VAT. - can also be viewed under power after consultation!

Condition: used, Corrugation types: F/W/E/B/C, double corrugation types: FF/FE/FB/EB, gray board weight: 600g-1200g/m², board thickness range: 0.15mm-6mm, grammage capacity: 180g-1200g/m², min. sheet size: 590mm/700mm, max. sheet size: 1015mm/1410mm, blade size X/Y: 995mm/1390mm, sheet start to 1st blade: 15mm. Documentation available. On-site inspection is possible. Ibjdpfx Apowltzxe Hjb

Condition: refurbished (used), The angled conveyor from MTF is available for sale. Feed length: 1300 mm Elevating belt: 1300 mm Maximum drop height: 1200 mm Ibsdpfx Apexmut Ns Hsb Usable width: 240 mm Total width: 520 mm New motor protection New conveyor belt with corrugated edge Corrugated edge: 300 mm Cleat height: 30 mm Belt speed: 4.2 m/min Mobile, with new running rollers

Year of construction: 2010, condition: used, machine/vehicle number: INS5, Technical Specifications & Performance Data This Divider Inserter by OMA is engineered for reliable insertion of cardboard partitions into cases at high efficiency. Built in 2010, it offers robust performance for industrial packaging and beverage production, making it a strong addition to any used bottling line or second hand packaging setup seeking improved product protection during transport. Manufacturer: OMA Model: INS ALV Year: 2010 Ibsdpfxsyh E Avo Ap Hob Production speed: approximately 1200 cases/hour Case formats: 6-bottle and 12-bottle cases Head configuration: single-head Included equipment: vibratory belt/conveyor for partition handling Electrical supply: 230 V, 50 Hz Installed power: 1 kW Weight: 1000 kg Marking: CE Advanced Automation & Control Systems The machine is equipped with a dual-sided control interface, featuring a redundant keypad on both sides of the frame to improve operability and access for line personnel. This layout streamlines adjustments, format changes, and maintenance tasks, enabling safer and more efficient operation. The single-head design supports consistent partition placement with reduced complexity and quick routine checks. Production Line Integration Capabilities Designed for seamless integration within industrial packaging lines, this Divider Inserter can operate inline with case erectors, bottle/case packers, and case sealers. It suits both retrofit projects and new installations in beverage production environments. Format compatibility includes 6- and 12-bottle case patterns, with straightforward changeover procedures supported by the dual-sided controls. The unit handles corrugated carton cases and cardboard dividers commonly used to protect bottles during logistics, making it a practical fit for bottling equipment and broader packaging machinery layouts. Machine Condition & Maintenance History The machine is currently in production and available for testing. Its ongoing operation demonstrates maintained performance and readiness for integration into a working used bottling line or industrial packaging line with minimal commissioning time. Operational Performance & Versatility With a throughput of approximately 1200 cases per hour, the OMA INS ALV supports mid-speed lines requiring dependable partition insertion to minimize bottle-to-bottle contact. The included vibratory belt ensures smooth partition feeding and orientation, enhancing process stability and reducing jams. The single-head configuration prioritizes accuracy and mechanical simplicity, which translates into consistent results and lower routine service requirements. Installation Requirements & Site Preparation The unit operates on a standard 230 V, 50 Hz electrical supply with a modest installed power of 1 kW, supporting energy-efficient operation. Its 1000 kg construction delivers stability during high-duty cycles while remaining compact enough for typical packaging hall layouts. The machine’s footprint is well-suited for integration along existing conveyor systems upstream of case sealing and downstream of case packing. Safety Standard...

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 7,000 mm, total width: 4,000 mm, total height: 3,130 mm, inner dimension height: 2,700 mm, inner dimension length: 6,900 mm, inner dimension width: 3,900 mm, Equipment: cabin, The automotive spray booth is a fundamental device in paint repair technology, enabling painting work to be carried out in safe and comfortable conditions while minimizing the negative impact on the surroundings and the environment. Specifications: - External dimensions: 7000 × 4000 × 3130 mm - Internal dimensions: 6900 × 3900 × 2700 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 640 × 1800 mm - Structure: standard steel - Heat exchanger: standard steel - Panels: EPS polystyrene - Total power: 7 kW - Installation: indoor only Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface - Installation possible only indoors Double Roof: - Upper external layer: corrugated steel panels - Inner structure: partially grated Air Circulation System (Supply System): - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 20,000 m³/h - Belt-driven system - Air recirculation control: none Lighting (Side Lights): - 20 side-mounted lamps - No option for ceiling lighting Air Heating System: - Single-stage Riello G10 oil burner, 54–120 kW - Manual burner control - Heating time: approx. 20 minutes Cabin Access: - Main Doors: - Dimensions: 3200 × 2600 mm - Three-leaf door system - Service Door: - Equipped with a separate service door - Pressure locks installed Filtration System: - Air intake: Pre-filter - Ceiling filter: Main high-flow filtration Filter Specifications: - Weight: 600 g/m³ - Thickness: 50 mm - Airflow: 900 m³/h - Capture efficiency: 97% - Air velocity: 0.25 m/s - Dust holding capacity: 650 g/m³ - Max temperature: 100°C - Filtration class (EN 779): M5 - Fire resistance (DIN 53438): F1 Ibodpfxexnbf Ue Ap Hsb

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials. Throughput is highly dependent on the screen and the input material: - up to 60 kg/h for EPS with a 15 mm screen *the coarser the screen, the higher the throughput. Motor 9.2 / 11 kW - 400 Volts, sturdy steel construction, hardened cutting blades, screen with interchangeable inserts, optional hole sizes: (8), (10), 15, 22, 26, 30, 40, or 60 mm with electric drive, star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge nozzle 150 mm, optional for plastic or corrugated pipes, blowing distance approx. 12 m, chassis with 2 running wheels Ø 380 mm, and one swiveling support wheel Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) weight approx. 240 kg, Ibjdpfeh S H T Uex Ap Hob Spare parts prices and options: 24 hardened blades, €9.90 each (net) 6 bolts, €14.90 each (net) 1 screen, €475 (net) 1 cover, €290 (net)

Condition: new, empty load weight: 820 kg, maximum load weight: 1,880 kg, overall weight: 2,700 kg, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, tire size: 195/50r13c, *3-S-K* tipper with leaf grid from *trailer manufacturer* HAPERT model COBALT HM-2 2700kg 305x180x30. Ibjdjqv Eidjpfx Ap Heb In our opinion, *cobalt tippers* from *Hapert* are extremely stable, very well equipped and also have a fair price. The *car trailer* as a *high loader* is designed for durability. High-quality equipment comes as standard with this three-way tipper. The extensive standard equipment of the *tipper trailer* at a glance. A corrugated grid attachment, extremely stable steel frame hot-dip galvanized, electro-hydraulics with battery, removable illuminated control unit, double-walled anodized aluminium side walls, all walls are foldable and removable, easy-to-operate eccentric locks, low chassis with 195/50R13C tyres, lashing eyes with 1000kg load capacity, net hooks, steel plate on wooden floor, automatic support wheel and a reinforced V-drawbar. We offer useful accessories for *Hapert three-way tipping trailers*. Here you will find an inexpensive side wall attachment, tarpaulin with frame, emergency hand pump, ramps, rear supports, 100km/h approval, tool box, lashing straps and lock.

Year of construction: 2003, condition: used, functionality: fully functional, GÖPFERT Corrugated Board Processing Machine SRE mini DE Year of manufacture: 2003 The machine performs the following processes: • Automatic sheet feeding • Longitudinal and cross cutting • Longitudinal and cross creasing • Slotting • Auxiliary die-cutting • Printing Equipment: - ANS 2/4500 feeder - Pneumatic tool clamping - Printing unit - Belt extraction table Isdpswzmc Iofx Ap Hebb - Siemens S7 control system Format: Max. sheet width: 1,400 mm Min. sheet width: 400 mm Max. sheet length: 4,000 mm Min. sheet length: 650 mm Material thickness: 2–7 mm Slot depth: 0–1,400 mm Slot width: 8 mm Max. die-cutting area: 90 x 1,400 mm Output: Max. 1,200 pcs/h

Condition: new, functionality: fully functional, empty load weight: 700 kg, maximum load weight: 2,000 kg, overall weight: 2,700 kg, loading space length: 5,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, Product information "HAPERT AZURE H2 2700kg 505x200x90cm Low Mesh Extension 13" High Loader" Isdpewiwvhefx Ap Hebb Extremely sturdy high loader from trailer manufacturer HAPERT, model AZURE H-2 2700kg 505x200. Thanks to its foldable aluminum side walls, the flatbed can be used very universally. Pallets can be easily loaded from the side or rear. All flaps and corner stanchions are removable, quickly transforming the flatbed into a clean platform. The standard equipment of the Hapert flatbed high loader is very extensive, including sturdy aluminum side walls, a low 13" chassis, center stanchions, eccentric locks, lashing eyes, net hooks on the hinged bottom sections, an automatic support wheel, an extremely sturdy welded and hot-dip galvanized steel frame, and a reinforced and bolted V-drawbar. Technical specifications can be found below. We also offer a wide range of trailer accessories for Hapert car trailers. These include higher side walls, corrugated mesh extensions, side wall extensions, a gross vehicle weight of up to 3500 kg, parabolic suspension, a raised front frame, loading ramps, rear supports, 100 km/h approval, a tool box, lashing straps, and a trailer lock, all available for an additional charge.

Condition: new, empty load weight: 770 kg, maximum load weight: 2,230 kg, overall weight: 3,000 kg, loading space length: 3,050 mm, loading space width: 1,780 mm, loading space height: 850 mm, tire size: 185/60R12, Felge schwarz, Three-way tipper with attachment from the manufacturer ANSSEMS model KSX3000 305x178E Go-Getter. The standard equipment of the Anssems tipper includes a steel floor, swinging and removable corrugated grid attachment, lashing eyes on the outside of the frame and inside, black rims, black aluminum side walls, all folding and removable, LED lighting, storage box, electric hydraulics with battery and cable remote control, drive-on rail shaft (rails at extra charge), sturdy welded steel frame, support wheel and a V-drawbar. We also offer accessories for Anssems tipper trailers with grid attachment such as flat tarpaulin, ramps, support set, lashing straps, net hooks, trailer net and anti-theft device. Isdjq Rfn Sopfx Ap Hebb