Used Copying Milling Machine for sale (83,972)

Condition: good (used), Technical data: Travel paths: Longitudinal X-axis: 762 mm Cross Y-axis: 305 mm Vertical Z-axis: 406 mm Quill travel: 127 mm Dcodpfx Abow Ebhmo Ter Spindle mount: collet chuck Table size: 1067 x 229 mm Speed range: 50–3750 rpm in two steps Weight: 1000 kg Equipment: - SONY digital readout, 2 axes (X and Y-axis) - Machine lamp - Drill chuck 0–13 mm - Collet system - Machine vice, jaw width 150 mm - Safety guard, electrically secured, type ZE-FS 30-300, fully mounted - Documentation Condition: good, workshop-tested

Year of construction: 1998, condition: like new (used), Retrofitted: 2025 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Dcjdpfx Absv D Rxms Tsr Technical features Dimensions Table dimensions: 7650 x 1000 mmNumber of T slots: 7T slots dimensions: 22 mm Traverses of axis X axis traverse: 5850 mmY axis traverse: 1200 mmZ axis traverse: 1500 mm Milling head Head type: Auto-indexing head UDG (every 2,5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 29,6 kW Feedrates Feedrates: 20 - 5000 mm/minRapid feedrates (X-Y-Z): 10000 mm/min Weight and dimensions Maximum weight on table: 4000 kg/m2Machine weight approx.: 31000 kgMachine dimensions approx.: 11590 x 5179 x 3485 mm Accesories Pherimetral guarding and new perimeter safety fenceAutomatic tool changer: ATC-30Longitudinal rear chip conveyorElectronic handwheel: New HR-510External coolant and high pressure through spindle Sales conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Year of construction: 2018, condition: used, machine/vehicle number: 7.F1/105-16 38204, 1 refrigerated dryer Dcjdpfx Absx Akhzs Tjr

Condition: used, Year of construction: 1990, Universal tool milling machine Make: MACMON Model: M 100 E Year of manufacture: 1990 – workshop tested Machine No.: 1479 Geometrical inspection with test protocol Accessories: - 3-axis digital readout K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual Dodpex Ada Rsfx Ab Tecr Used as seen, without warranty The machine conforms technically to the state of the art at the year of manufacture.

Condition: excellent (used), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, complete, fully operational, and ready for immediate use. ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Fritz Heckert Combine • Weight: approx. 1,700 kg • Worktable: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1,800 rpm • Power supply: 3x380 V / 50 Hz • Motor power: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, fuse protection: 25 A • Mechanical and automatic feeds in axes ✔ Equipment included: • Heavy-duty machine vice on the table • Work light • Coolant system • Complete control panel with setting wheels and feed controls ✔ Advantages: • Very stable, heavy-duty design (1.7 t) – ideal for precise and repeatable machining • Renowned manufacturer – Heckert (GDR), known for indestructible machines • Functional and complete – ready to work immediately • 1000 mm table – enables machining of larger components Dodew Uab Nspfx Ab Tjcr This is a reliable machine, not a cheap, lightweight Chinese construction – just classic engineering from an era when equipment was built to last.

Condition: excellent (used), Year of construction: 1990, Universal Milling Machine Niigata 2 UMCN, year 1990 Travel X-axis: 720 mm Travel Y-axis: 340 mm Travel Z-axis: 450 mm Table size: 310 x 1370 mm Vertical spindle distance to table: 50 - 450 mm Feeds – longitudinal and cross: 20 - 800 mm/min Vertical feed range: 9 - 355 mm/min Rapid traverse longitudinal and cross: 3000 / 1375 mm/min Spindle taper: SK 50 Spindle speeds: 40 - 1750 rpm Total power requirement: 5.5 kW Machine weight: approx. 2.4 t Required space: approx. 1.9 x 2.0 x 1.5 m - Robust / high-performance CNC universal milling machine - Including Fanuc OM control - Universal milling head - Automatic feeds in X/Z/Y axis - Central lubrication - Coolant system - Rotary table - Splash guard tray Dodpfx Abox Dthao Tjcr - Various holders

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Technical data Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Suction nozzle 2 x Ø 120mm Infinitely variable speed control 150010000 rpm Motor power 7.5 kW (10 HP) Net weight approx. 880kg Technical description 7" touch control, can be used optionally, top and bottom 7" capacitive touchscreen, can also be operated with gloves can also be operated with gloves (e.g. with Maxi Flex) Dcsdsxz Smpepfx Ab Tor Language switching German, English, French (other languages on request) Milling cutter zero point selectable in the program, 3 reference points Simple menu structure thanks to innovative touch control (max. 2 levels) Display (work screen) for tool and program number program number, height, angle, speed and milling fence Operating hours counter Warning messages in the event of incorrect operation Remote maintenance via Internet (VPN tunnel) USB interface for data backup and importing Tool, program and user Tool database for 5 tools (20 programs possible per tool) 20 programs are possible per tool) Heavy-duty bench router with double-sided swivel-mounted, fixed built-in milling spindle for swivel range of +/- 45.5° 2-axis positioning control for height and tilt adjustment swivel adjustment Electronic position and speed displays Infinitely variable speed control 1500 10000 rpm 7.5 kW motor with 11 KW frequency converter Push button with electronic soft start Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Milling fence 301 Overall adjustment via 1 handwheel on the right-hand side, Adjustment range approx. 140 mm, dimension display, Total stop via touchscreen +/-0.1 mm, Partial stop adjustment, (chip removal) +5mm to -25mm is carried out via a star knob screw on the left side side, dimension display via one mm vernier, clamping on the machine table the machine table manually via clamping clamping screws, milling fence made of die-cast aluminum with 2 milled cast iron stop slats 500mm long with aluminum splitter tongues, maximum possible tool diameter is tool diameter is 250 mm Machine socket Lockable main switch Electronic, wear-free motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30mm with quick-release nut CE-compliant incl. - Milling fence type 301 - Cast stop plates and aluminum splitter tongues - Milling protection and pressure device GAMMA V 1629 Table pusher for table top 1100 x 760 mm Coated surfaces, for quick, convenient and tool-free tool-free adjustment to different tool diameters tool diameters up to max. 240 mm, the table insert Table insert with quick lock up to tool diameter 155 mm instead of standard table insert rings (not in conjunction connection with rotary table) - Zeromaster reference measurement setting device for exact 0-point height adjustment from the milling tool to the table top for 24 V DC - HSK-80 quick-change arbor system with spindle lock and spindle lock and milling arbor 30mm instead of milling spindle 30mm (higher concentricity and no sticking in the spindle as with the spindle as with the MK 5 system or steep taper) - Console to the

Condition: used, Motor 6 / 7.5 kW Location: Nattheim Dcedpfx Aew Enw Ijb Tor

Year of construction: 2023, condition: used, machine/vehicle number: 23091433, HEIDENHAIN control, clamping table approx. 1,000x4,200 mm, travel (X/Y/Z): approx. 4,000/1,500/1,300 mm, 24-position tool changer, URRETXU MAQ 1433 chip conveyor, year of manufacture: 2023, serial no.: PL020646, EATA EL3-R5/VERT industrial cooler, year of manufacture: 2023, serial no.: 31842, REXROTH hydraulic unit, safety enclosure Djdpfx Abjx Akl He Tjcr

Condition: good (used), Year of construction: 1991, Table clamping surface: 710 x 400 mm Tool holder: ISO 40 Travel distances: X-axis: 400 mm Y-axis: 350 mm Y-axis, additionally movable: 420 mm Z-axis: 380 mm Quill stroke: 80 mm Speed range: 45 – 2240 rpm Feed range, stepless: 6.3 – 1250 mm/min Rapid traverse: 1250 mm/min Drive power: 2.2 / 2.8 kW Dimensions (L x W x H): 1400 x 1600 x 1850 mm Weight: 1900 kg Accessories / Special Features: • 3-axis digital readout, manufacturer HEIDENHAIN Dcjdjupiypopfx Ab Tor • Vertical and horizontal milling spindle • Vertical milling head with quill, swivels left and right • Infinitely variable feed • Rapid traverse on all 3 axes • Fixed angle table • Coolant system • Chip tray • Spindle clamping at the push of a button, e.g. for tool change • Machine feet • Central lubrication system • Control panel • Emergency stop switch Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), functionality: fully functional, Speeds: Row 1, stepless 150 – 1000 rpm Row 2, stepless 300 – 2000 rpm Mount: ISO 30 Feed rate in X approx.: Row 1, stepless 15 - 60 mm/min Row 2, stepless 50 – 250 mm/min Dcsdpfx Asx Dm Rusb Ter Travel range approx.: in X 280 mm in Y 170 mm in Z 250 mm

Year of construction: 1990, condition: ready for operation (used), Offered is a Deckel FP 4 AT CNC milling machine year 1990. Control: Dialog 11. Coolant system: 70l, tool holder: SK40, tool changer: 20-fold, travels X/Y/Z: 560mm/500mm/390mm, table size X/Y: 900mm/530mm, spindle speed: up to 4000rpm, rapid traverse: 4000mm/min. Machine weight: approx. 2890kg. Tool changer defective. Viewing is possible by arrangement. Dsdpfx Ajx Dm Dueb Tecr

Condition: ready for operation (used), Year of construction: 1996, Tilting Spindle Moulder Table Moulder Woodworking Moulder Joiner’s Moulder CASOLIN Model: F45 Year of manufacture: 1996 5 adjustable spindle speeds: 3000/4500/6000/8000/10,000 rpm Dcsdpex Dmnaefx Ab Tsr Table dimensions approx. 130 x 90 cm Milling fence with fine adjustment Electric height adjustment with digital display Electric tilting from -5° to +45° with digital angle display Spindle diameter: 30 mm Matching power feeders can be found in my other listings. Condition as shown in the pictures, please also refer to the item description. Parts may also be collected by the buyer. All dimensions are approximate. All information is provided to the best of our knowledge, but without guarantee. Subject to prior sale. Items can be collected in person or shipped at the buyer’s expense. Shipping costs are indicative and may vary depending on distance and unloading options. The listed sale price is a net amount plus VAT. An invoice with VAT shown will be provided. Warranty terms: Due to wear and tear on used parts, items are generally sold as defective – for parts donors only – and only to businesses. By placing a bid, the buyer accepts this as the basis for the purchase agreement.

Condition: good (used), Universal milling machine, tool milling machine, milling machine, drilling machine Manufacturer: MAHO Model: MH 560 Travel distances: X: 400 mm Y: 300 mm Z: 400 mm Spindle speeds from 40 to 2000 rpm. Feed rates on X, Y, and Z axis: 0 - 500 mm/min. Rapid traverse on X and Y axis: 1.2 m/min. Spindle taper: SK 40 Quill travel: 50 mm Total power requirement: 3 kW Dcjdpfxsx Dl N As Ab Tor Machine weight: 1000 kg Dimensions: Length 1300 mm, Width 1400 mm, Height 1700 mm Swiveling vertical milling head with manual boring quill Table size: 690 x 280 mm Coolant system Boring quill The machine is in very well-maintained condition and ready for immediate use. Forklift available, free loading onto truck Low-cost shipping possible Machine location: 59510 Lippetal

Year of construction: 2023, condition: used, machine/vehicle number: 23051428, HEIDENHAIN control, clamping table approx. 850x2,700 mm, travel paths (X/Y/Z): approx. 2,500/1,000/1,100 mm, 24-position tool changer, chip conveyor URRETXU MAQ 1421, year of construction: 2023, serial no.: PL0000073, industrial cooling EATA EL3-R5/VERT, year of construction: 2023, serial no.: 32011, REXROTH hydraulic unit, safety enclosure Djdpfx Abox Aklyj Tocr

Condition: good (used), Year of construction: 2007, machine/vehicle number: 21207004, Offer 25434 Technical Data: - Working range of axes - X (longitudinal) / Y (transverse) / Z (vertical): 750 / 380 / 380 mm - Table dimensions: 1300 x 300 mm - Tool holder: ISO 40 - Quill stroke: 140 mm - Distance vertical spindle – table: 20 - 540 mm - Spindle speeds: 80 - 3,800 rpm - Feed X – Y and Z axis - Rapid traverse: 1,400 mm/min - Swiveling vertical milling head: 45° left & right - Swiveling overarm: 360° - Coolant system - Drive: 400 V / 5.0 kW - Required space (approx.): W 2,000 x H 2,500 x D 2,100 mm Dcsdpfxjx Dl Hhj Ab Tjr - Weight approx.: 2,200 kg - Separate workbench / tool cabinet with various accessories

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: ML120-12000 6 assen gelijktijdig (X / Y / Z / W / B / V) + 2-assige indexeerfreeskop (2,5°) 8 assen gelijktijdig (X / Y / Z / W / B / V) + continue orthogonale freeskop (A: +-120° / C: +-180°) Dsdpjxpgf Nofx Ab Tjcr Zware CNC-frees- en boormachine / CNC-vloerboor- en freesmachine ramgrootte: 630 x 500 mm - ramslag: 1250 mm spindeldiameter 130 mm - slag: 650 mm - zonder freeskop te gebruiken als boor CNC continue orthogonale freeskop (A: +-120° / C: +-180°) CNC indexeerfreeskop (2,5°) gereedschapswisselaar voor het automatisch wisselen van twee freeskoppen koeling door spindel gereedschapswisselaar met 60 posities spaantransportband Siemens aandrijvingen en motoren Heidenhain regel- en meetlinialen gewicht van de machine: 60 ton afmetingen van de machine: 19 meter x 12 meter x 6,65 meter TIRT3025 CNC draaitafel continu: - max. 60 ton werkstukgewicht - hydrostatische tafel - afmetingen: 3000 x 2500 mm - slag of draaitafel: 2500 mm - max 2 toeren per minuut - gewicht van de tafel: 37 ton - afmetingen: 6500 x 2500 x 1500 mm 3 T-sleuftafels - 7600 x 2800 mm - 7600 x 2480 mm - 4300 x 1800 mm - gewicht van de tafels: 50 ton Fresatrice a montante mobile - Freesmachine met mobiele kolom - Fraiseuse-aleseuse avec montant mobile - Fräs-Bohrmaschine mit beweglichem Ständer Longitudinal travel X-axe: 12 000 mm Crosstravel Y -axe: 1250 mm (ram-travel) Travel Z-axe (Height): 3500 mm Power on spindle: 37 kW Admission in millingheadspindle (ISO): ISO 50 Max quill travel Z': 1250 + 650 mm Max speedrange: 6 > 2000 rpm

Year of construction: 2007, condition: ready for operation (used), A Deckel Maho (DMG) CNC 5-axis milling machine is available. Travel range X/Y/Z: 500 mm/420 mm/380 mm, tool positions: 30, speed: 18,000 rpm, max. workpiece weight: 200 kg, table diameter: 650 mm, positioning accuracy: +/-0.015 mm, rapid traverse: 24 m/min. Machine dimensions X/Y/Z: approx. 2500 mm/3000 mm/2500 mm, weight: approx. 5000 kg, control: Heidenhain MillPlusIT, operating hours: 52590 h, spindle hours: 22009 h. The rotary encoder of the machine fails sporadically. Documentation available. On-site viewing is possible. Dcjdox Dm D Ujpfx Ab Tsr

Condition: not inspected (used), Year of construction: 1986, travel distance X-axis: 1,860 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 760 mm, spindle speed (max.): 1,800 rpm, 3-axis display table 2170X700MM travels 1860X1016X760MM spindle taper SA 50 Dsdpex Diqqefx Ab Tjcr maximum spindle speed 1800 rpm weight 8500KG

Condition: good (used), Universal milling machine, tool milling machine, drill press (used) Manufacturer: Deckel Dcodpfxox Dl Hzj Ab Ter Model: FP 4 3-axis Heidenhain digital display Travel paths: X-axis: 700 mm Y-axis: 400 mm Z-axis: 450 mm Feed rate: Longitudinal and cross: 10 – 500 mm/min Vertical: 5 – 250 mm/min Rapid traverse: Longitudinal and cross: 2000 mm/min Vertical: 1000 mm/min Tool holder: SK 40 Table size: 1000 mm x 390 mm Spindle speed: 31.5 - 1600 rpm Total power requirement: 5 kW Machine weight: approx. 2600 kg Machine dimensions (L x W x H): 2000 mm x 2000 mm x 2200 mm Coolant system Automatic tool clamping The machine is in good condition and ready for immediate use. Forklift available, free loading onto truck Affordable shipping available Machine location: 59510 Lippetal

Year of construction: 2023, condition: used, machine/vehicle number: 23071429, HEIDENHAIN control, clamping table approx. 3,200x1,000 mm, travel (X/Y/Z): approx. 3,000/1,500/1,300 mm, 24-position tool changer, industrial cooling EATA EL3-R5/VERT, hydraulic unit REXROTH, chip conveyor URRETXU MAQ 1429, year of manufacture: 2023, serial no.: PL020644, safety enclosure. Djdpfxjx Aklts Ab Tscr

Condition: used, Year of construction: 1995, operating hours: 24,142 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, feed rate X-axis: 3,000 m/min, feed rate Y-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, type of input current: three-phase, workpiece weight (max.): 1,500 kg, spindle motor power: 7,500 W, controller manufacturer: Heidenhain, controller model: TNC 360, For sale is a Lagun CNC milling machine, year of manufacture 1995, with 24,150 operating hours. Technical data: - Control: Heidenhain TNC360 - X-axis: 1100 mm - Y-axis: 600 mm - Z-axis: 600 mm - Table size: 1200 mm x 550 mm - Spindle taper: ISO50 BT40 - Speed range: 50–3000 rpm - Rapid traverse: 10,000 mm/min The machine is equipped with a manual universal milling head and an enclosure. The machine is in running condition and can be inspected under power. Dedpfxexmhaij Ab Tscr

Condition: new, Year of construction: 2025, This machine meets expectations where accuracy is key, perfect for school and industrial training workshops. Drilling, milling and turning done taking only a small amount of space. 2 x autofeed- longitudinal and cross. Technical data Swing over bed 320 mm Maximum working length 750 mm Swing after bridge removal 210 mm Spindle bore 38 mm Spindle taper MK5 Tool holder size 16x16 Transverse travel 160 mm Longitudinal travel 100 mm Metric thread 17 Metric thread pitch 0.5–4 mm Inch thread 20 Inch thread pitch 9–40 1/n'' Longitudinal feed 0.135–1.80 mm/turn Cross feed 0.025–0.34 mm/turn Tailstock quill extension 70 mm Tailstock quill taper MT3 Number of spindle speeds 6 Spindle speed 75–1900 rpm Motor power Dedpfericx Sex Ab Tjcr 1.1 kW, 230V 50 Hz Drilling and milling machine Spindle bore MK3 Number of spindle speeds 4 Spindle speed 240–2700 rpm Maximum drilling diameter 16 mm Swivel head 360° Motor power 370 W Dimensions 1500×635×1200 Weight 390 kg Standard equipment - stand, - 2 dead centres, - set of gears, - set of soft jaws, - drilling chuck 16mm, - 3-jaw lathe chuck, - tools

Year of construction: 2005, condition: ready for operation (used), A Deckel Maho (DMG) CNC 5-axis milling machine is available. Travel range X/Y/Z: 750 mm/600 mm/520 mm, table dimensions X/Y: 700 mm/500 mm, max. table load: 350 kg, speed: 18,000 rpm, tool holder: HSK-63A, tool positions: 60, rapid traverse: 50m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 6500mm/3500mm/3500mm, weight: approx. 8500kg, control: Heidenhain MillPlusIT, operating hours: approx. 80,640h, spindle hours: approx. 33,873h. The table is slightly jerky. Documentation available. On-site viewing is possible. Expected to be available from March 2026. Djdpfxsx Dm Efj Ab Tjcr

Condition: used, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 350 mm, table width: 1,770 mm, table length: 3,550 mm, overall weight: 9,000 kg, total length: 5,890 mm, total width: 2,990 mm, total height: 3,125 mm, tool diameter: 140 mm, tool length: 200 mm, tool weight: 15,000 g, tool magazine motor power: 12,000 W, SPECIAL PRICE Dcjdpfx Abjxdiups Ter Advanced Cnc Router for Drilling, Contouring and Shaping slabs in Marble, Granite, Quartz, Ceramic, Lapitec to create kitchen and vanity tops