Used Construction Fence for sale (20,011)

Condition: ready for operation (used), Libherr Semi Mobile Mixing Plant 120 Qm Std. The plant description serves only for the general identification of the of the system and does not constitute a warranty in the sense of sales law. The information does not claim to be complete. The information information/descriptions and pictures are non-binding and do not serve as Hnedpfxou A Dt Sj Ah Nog guaranteed properties. The seller assumes no liability/warranty for typing and data transmission errors. Equipment may have to be checked separately. But if you come by, you are welcome to view the plant have a look. I look forward to any reply.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 25x48x5/9, total width: 23,300 mm, total length: 48,600 mm, total height: 9,200 mm, axle spacing: 4,400 mm, number of axes: 12, We are pleased to present you with the following offer for a high-quality HALTEC Steel-Flex System Hall, which is currently being prepared for dismantling. The hall is in good technical condition, features a durable hot-dip galvanized load-bearing structure, offers great operational flexibility, and an exceptionally attractive price-performance ratio. 1. Object Data Manufacturer: HALTEC. System type: Steel-Flex HS. Dimensions: approx. 25.30 m × 48.60 m × approx. 5.20 m / 9.20 m (span × length × eaves height / ridge height). Roof type: Gable roof, approx. 18° roof pitch. Condition: used, technically sound; load-bearing structure in perfect order. Hnsdpfx Aex Ndb Doh Nsg Anchoring system: ground spike and partial anchor bolt fixation. 2. Construction & Equipment Primary structure: 10 two-hinged frames, IPE 270, S355, with tension rods FL 80 × 15 mm. 2 gable frames, IPE 270, S355, plus gable columns IPE 200, S235. Secondary structure: Purlins and wall rails made from cold-formed hollow sections. Steel cable cross bracing with turnbuckles for structural stiffening. Roof & Walls: Cladding with coated steel trapezoidal profiles. Doors & Gates: 8 electric roller shutters, approx. 3.00 × 3.00 m. 4 emergency exit doors, approx. 1.00 × 2.00 m. Daylight System: Continuous roof light band below the eaves on both sides. 3. Load Specifications (manufacturer standard, estimated) Snow load: approx. 0.75 kN/m². Wind load: approx. 0.50 kN/m². 4. Documentation The hall documentation has been requested and will be made available as soon as it: - is located in the archive of the relevant building authority, or - alternatively, can be sourced directly from the manufacturer. 5. Your Benefits Hot-dip galvanized steel structure – durable, low-maintenance, corrosion-resistant. HALTEC brand quality – German-made system halls. Large gate systems – ideal for logistics, commercial, vehicle fleet, industrial, and storage applications. Flexible deployment – for rental storage, transfer warehouse, workshop, and more. Modular design – ideal for quick assembly and disassembly. 6. Price Offer HALTEC Steel-Flex Hall AS IS (ex location Berlin): by offer. Should you have any questions, require technical clarification, or wish to schedule a viewing appointment, we are at your service at any time.

Condition: as good as new (ex-display), Year of construction: 2023, Sirius with the option of connection to PaletteCAD CNC machine for furniture production CNC precision machining center for complete machining - drilling, grooving, milling. Including complete tool and drill set. Milling unit 5.5KW 6-slot tool changer ISO30 Drilling unit with grooving unit Lamello P- Possible Hedpfeq Haamsx Ah Neng Air cushion tables at the infeed-outfeed 2 counter-pressure devices from above 160 mm diameter extraction manifold LED interior lighting

Condition: good (used), Year of construction: 1998, Versatile frame dowel and slot boring machine with angle adjustment Especially designed for staircase construction, window manufacturing and universal applications thanks to pneumatic height adjustment. Hedpoxmatnsfx Ah Nong Angled doweling and baluster drilling are easily achieved via the rotatable drilling unit. Motor with pole switching, two speeds Motor power 1.0 / 1.5 kW, 1,400 and 2,800 rpm Motor started via convenient handle switch With Röhm two-jaw chuck 1 - 20 mm Linear laser for precise workpiece positioning Drilling unit can be rotated 65 degrees left and right Pneumatic height adjustment for processing, doweling possible on two levels without repositioning. Desired drilling heights for each drilling level can be set via digital counter; switching between levels is pneumatic and operated from the front. Cross adjustment 340 mm, stepless or in 12 mm increments, with indexing bar Pneumatic clamping possible at any position, operated from the front Maximum height adjustment approx. 100 mm above table level Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps 1 clamp column can be moved to the front 2 swiveling workpiece supports Extraction funnel Central stop + 1 side stop Fixed mitre stop Length stop as round bar Assortment of drill bits Operating manual CE marking Machine has been partially repainted due to presence of paint splashes. Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See "More offers from this seller."

Condition: used, color: other, For further information, you can reach us on weekdays from 8:30 am to 5:00 pm and on Saturdays from 10:00 am to 3:00 pm at the following phone number . You can also email us at: See you soon! Hsdpfxex Nw Rxj Ah Neng

Condition: like new (used), functionality: fully functional, empty load weight: 9,200 kg, maximum load weight: 28,800 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2020, loading space length: 11,600 mm, loading space width: 2,550 mm, loading space height: 850 mm, total length: 11,600 mm, suspension: air, tire size: 245.70 R 17.5, tire condition: 80 %, ground clearance: 850 mm, color: dark red, Year of construction: 2020, Equipment: ABS, tail-lift, Bertoja lowbed semi-trailer, 11.70m used, 3 axles with first axle liftable and third axle steering, air suspension, EBS, ride height control valve, 5-ton lashing rings on the sides and deck, wide double electro-hydraulic ramps with wood and grating surface, rear stabilizer legs, total length 11.70m, 8-meter loading platform, year 2020, like new, MOT valid until 30.04.2026 – Dealer INTERDRIVE SRL – Parma Hodpfjx Nmwhsx Ah Nong

Condition: used, Color: Yellow Length: 4,000 mm Height: 1,700 mm. Hedpfxolf Izfo Ah Neng Safety fence to secure machines or areas.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 2200 kg Hsdpfx Ahsvz E Tgs Neng Total power requirement 44 kw

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping Hnedpfxex D Df Nj Ah Neg - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 4,000 h, Articulated dump truck ASTRA AD125C, year 2007, 4000 hours, 6x6 Hnedpfx Aex Iwadsh Njg

Condition: used, This used stacking bin is made of steel and has a hot-dip galvanised finish. The bin has a fixed construction and is suitable for intensive use in storage and transport environments. There is a practical flap on the short side, which allows easy access to the contents even when the bins are stacked. The external Hnodpfx Ahjw Swvxs Njg

Condition: ready for operation (used), functionality: fully functional, empty load weight: 7,400 kg, maximum load weight: 29,400 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 09/1997, loading space length: 1,360 mm, loading space width: 2,550 mm, loading space height: 850 mm, suspension: air, tire size: 245.70 R 17.5, tire condition: 70 %, ground clearance: 850 mm, color: orange, Year of construction: 1997, Equipment: ABS, tail-lift, Used De Angelis low-loader semi-trailer with winch, 3 axles (3rd steering), air suspension, ABS, gooseneck chassis with twin full-width electro-hydraulic rear ramps, hydraulic winch under the neck (max. 24 tons), lowered deck section 9.95 m long x 85 cm from the ground, aluminum side boards 70 cm high, opening and removable, year 1997, inspected until 31/12/2026 – DEALER INTERDRIVE SRL – PARMA Hodpfx Aox H S Awjh Nong

Condition: excellent (used), Year of construction: 2017, PERII production pallets, dimensions 1200x1100x50 mm, quantity 4,000 pcs, price given per piece, condition B – good. Hnedpsx Hdpiefx Ah Nog

Condition: like new (used), Year of construction: 2019, total height: 750 mm, total width: 670 mm, total length: 360 mm, 3 pcs. WALTHER distribution cabinets with approx. 15 m connection cable 5 x 16 mm² Details: According to IEC61439-4 Enclosure (H06) made of electrolytically galvanized steel sheet with heavy-metal-free plastic coating Color: RAL 2004 - pure orange with single door, spring-loaded latch for padlock, and recessed handle with crane lugs and side carry handles Including hot-dip galvanized underframe with lugs for ground stakes Protection class: IP 44 Approx. dimensions: 739 x 669 x 360 mm (H-W-D) Underframe height approx. 230 mm Connection: 1 circuit breaker 3P 63A with thermal-magnetic trip unit with terminal clamps 10-50 mm² Output / Protection: 1 RCD circuit breaker 4P 63A/30mA -B- 1 CEE panel socket 32A 5P 400V 6h with miniature circuit breaker (MCB) 3P 32A -C- Hedpsxrr Smofx Ah Neng 2 CEE panel sockets 16A 5P 400V 6h each with individual miniature circuit breaker (MCB) 3P 16A -C- 1 RCD circuit breaker 4P 40A/30mA -A- 6 safety sockets 16A 2P 230V each with individual miniature circuit breaker (MCB) 1P 16A -C- Sale is ex works, against advance payment Price is per single distribution cabinet

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph Hnjdpfx Aex D Dbkeh Neg Double Skinned Insulation • 5mm first skins235jr main tank body • 100 mm stonewool insulation between skins • 3mm top skin s235jr • 500 ton total capacity • Complete electrical heating • DN80 outlet steel pipe and valve • DN80 inlet pipe and valves • Hydrostatic Level Gauges • 3x45kw Heating Coils • 3x45kw Gamak/Yılmaz Gerbox/Motor Stirrer • 110 Tons Weight • 2xPT100 Tempereture sensor • Capacitive Level sensor • Power panel and control panel on chassis • Plug-in Electrical Installation • Turn-key ready to use

Year of construction: 2015, operating hours: 292 h, condition: used, Empty weight: 14.400 kg Chassis type: rigid General condition: very good Technical condition: very good Hnjdexy Rf Uopfx Ah Nog Visual appearance: very good Delivery terms: EXW Transport dimensions (LxWxH): 6,2x2,45x2,5 Production country: CH Please contact Vink Machinery for more information Menzi Muck M545 * 2015 * Diesel drive * Demo model * 292 operating hours * 4x4x4 * Air conditioning * Independent suspension

Condition: used, L: 1250, W: 1050, H: 560 (mm). Hjdemn Ii Iepfx Ah Nong Product: Mesh Stillages. Type: Fixed construction stackable. Version: B-quality, with damage. Material: steel. Walls: mesh. Floor: steel. Euronorm (mm): 1200 x 1000. Colour: green. Surface treatment: painted. Internal length (mm): 1175. Internal width (mm): 980.

Condition: good (used), functionality: fully functional, empty load weight: 12,000 kg, maximum load weight: 48,000 kg, overall weight: 60,000 kg, axle configuration: > 3 axles, first registration: 06/2017, loading space height: 850 mm, total length: 13,600 mm, total width: 2,550 mm, total height: 850 mm, suspension: air, tire size: 245.70 R 17.5, tire condition: 74 %, color: green, Year of construction: 2017, Equipment: ABS, tail-lift, Used De Angelis extendable heavy-duty low loader semi-trailer, 4 axles with first axle liftable and third and fourth axles steering, chassis extendable by an additional 3.70 m, air suspension, EBS, RUD lashing rings on the platform rated at 7 t, single electro-hydraulic ramps, side extension outriggers, rear and front stabilizer legs, year 2017, stake pockets, steel and wood floor with closed low-bed deck of 9.40 m + 3.70 m extension, deck height 85 cm from the ground, aluminium sideboards on gooseneck, gross load capacity up to 70 t, tare weight 16 t, roadworthiness inspected until 30.04.2026 – DEALER INTERDRIVE SRL – PARMA Hnedpfx Aox H Swuoh Nog

Year of construction: 2024, condition: used, General information Field of application: Freight transport Hodsxyqkkjpfx Ah Nsng Drivetrain Make of engine: Mitsubishi Functional Lifting capacity: 4 kg History Number of owners: 1 Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Hydraulic outreach: 2700 cm Remote control: Cable Latest inspection: 2025-02-03 Production country: DE Additional information Please contact Michael Overmeer for more information Böcker HL 27 Agilo Furniture lift mounted on a Mitsubishi Fuso 3515 construction year 12-2024 (first in use 02-2025) with only 62 hours and 2.865 kilometers. The lift is like new and has a capacity of 400 kg and is equipped with a XXL basket, hydraulically operated support legs, remote control and a storage box. Changes and typographical errors reserved.

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Hnedpfx Ahjx D A R Ds Njg Productivity: 50 tph BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.

Condition: used, A used steel stacking container is made of hot-dip galvanized steel and built according to the standard Euronorm dimensions of 800 × 600 mm. With a generous capacity of 206 liters, the container offers ample storage space for heavy, loose, or bulk products. The closed, profiled walls and bottom reinforce the construction and provide Hnedpfx Aox Huf Ujh Nsg

Condition: used, New: Yes Applicable material: Bitumen Hodpex D A Rkjfx Ah Neng Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Condition: used, A used steel stacking bin is a versatile and durable solution for storage and transport, ideal for industrial applications. Hodpfx Ahsx Hufzo Nong Dimensions according to Euronorm 1000x800 mm. This makes the bin suitable for standardized logistics processes, such as pallet storage. With a capacity of 382 liters, the steel storage bin offers ample

Condition: used, A used mesh container with Euronorm dimensions of 1200 × 800 mm is a practical and well-organized storage solution for a variety of warehouse and logistics applications. With a generous 700-liter capacity, the container offers ample space for bulk goods, parts, returns, or order picking. The container is constructed of blue-painted Hodox Hug Eopfx Ah Nsng

Condition: used, Batch offer of three used steel stacking bins. Made from painted steel. Designed for handling heavy loads, this bin is ideal for industrial use. With a capacity of 336 litres and standardised dimensions of 1035 x 835 mm, the bin offers ample storage space and is easy to integrate into existing logistics processes. The walls Hnjdpfx Asx Huf Ioh Nog