Used Compressor System for sale (42,542)

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, COMPLETE PACKAGE: Mobile, transportable compressed air supply station – the entire system is installed in a red steel container (10 ft) and can be transported as a single unit using a crane. Simply connect the three-phase power supply and compressed air line – and it’s ready to go. The interior features a HIGH-QUALITY INDUSTRIAL SYSTEM manufactured in 2025: - SCC screw compressor with frequency inverter (speed-controlled, energy-efficient) - 2000-liter pressure vessel VIG (stands upright, protrudes through the container roof with a weather protection cover) - Complete control system with touch panel and emergency stop button on the outside - Acoustic sound insulation (black foam mats inside) - Permanently installed electric heater in the container (frost protection for year-round operation) - Hose material and compressed air connections for consumers - Crane lifting points on the container roof - Control panel with touch display, emergency stop, status LEDs Originally from the shipyard operations of Strela Shiprepair GmbH. System freshly painted, clean, and ready for use. Assumption of the maintenance contract with Schulze is possible. Gedjzav Ddjpfx Ak Ueug TECHNICAL DATA: SCREW COMPRESSOR: - Manufacturer: SCC Air Compressors - Control: SCC frequency inverter (speed-controlled) - Type: Screw compressor, stationary in the container - Year of manufacture: 2025, commissioning date: 23.05.2025 - Operating time: approx. 1 year in shipyard operations PRESSURE VESSEL: - Manufacturer: VIG GmbH, Kreuztal - Volume: 2,000 liters - Max. pressure: 11 bar - Test pressure: 15.73 bar - Temperature: -10°C to +50°C - Standard: AD 2000, test mark 1003 - Factory No.: 124585, year of manufacture 2025 CONTAINER: - 10-foot steel container, soundproofed, painted red - External dimensions: approx. 2,991 x 2,438 x 2,591 mm - Crane lifting points on the roof (photo attached showing the shipyard crane) - Three-phase power connection 400 V CEE IDEAL FOR: - Shipyards and shipbuilding companies (mobile compressed air supply for ships) - Sandblasting service providers (mobile complete solution) - Industrial companies with changing locations - Automotive/body shops with an external location - Construction companies, scaffolding companies PICKUP: Loading with the shipyard crane directly on-site (container has lifting points on the roof). Transport by low-bed trailer via a forwarding agency. Inspection appointments are available at any time – we will then show you the complete documentation and demonstrate the system in operation.

Condition: excellent (used), I am offering a professional DELO dispensing system – DELO-DIV pilot with a DELO-DIV VD450 manual dispenser. This equipment is designed for precise and controlled dispensing of adhesives and various media in industrial applications. The system is ideally suited for use in: • Electronics manufacturing • Automotive sector • Precision assembly • Laboratories and R&D • High-repeatability technical bonding processes Operation is managed via the DELO-DIV pilot touchscreen panel, which allows: • Saving and selection of dispensing programs Gujdpfxsyc H U Ss Ak Usg • Manual dispensing (manual mode) • Precise adjustment of working parameters • Intuitive operator interface The DELO-DIV VD450 manual dispenser ensures high application accuracy and process stability. — Condition • Used • Fully functional • Normal signs of use • The unit powers on and responds correctly (visible in the pictures) — Set includes • DELO-DIV pilot controller (touchscreen panel) • DELO-DIV VD450 manual dispenser • Cables / connectors as shown in the photos — Additional information • Manufactured in Germany • CE / UKCA marking • Ideal for production facilities and process integrators

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Gedpsy Iplfsfx Ak Ueug Very little use Ex Pharma Facility

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, machine/vehicle number: V04PL0099, System Ceramics – Automatic Tile Palletizing Machine (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: Automatic palletizing machine for ceramic tile packages Condition: Used – fully refurbished Status: In good working condition Automatic system designed for palletizing ceramic tiles, suitable for integration into ceramic production lines. Technical information: * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate Gjdpeyy A Hgefx Ak Uoug The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.

Condition: like new (used), Year of construction: 2021, operating hours: 57 h, functionality: fully functional, machine/vehicle number: V002117/16, overall weight: 450 kg, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 66 m³/h, operating pressure: 10 bar, pressure (min.): 0.5 bar, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, Hertz HBD 7 screw compressor, 7.5 kW – 10 bar – 57 operating hours – including refrigerated dryer Description: Hertz HBD 7 screw compressor – in like-new condition – only 57 operating hours. For sale is a Hertz HBD 7 screw compressor system from 12/2021 with only 57 operating hours. The system has been operated very little and is in very good, like-new condition, both visually and technically. Technical data of the compressor: Gujdpjzt Sriefx Ak Ujg * Manufacturer: Hertz Kompressoren * Model: HBD 7 * Year of manufacture: 12/2021 * Operating hours: only 57 hours * Power: 7.5 kW * Max. pressure: 10 bar * Volume flow: 1.1 m³/min * Voltage: 400 V / 3 phases * Frequency: 50 Hz * Screw compressor, oil-cooled * Serial number: see nameplate Refrigerated dryer: * Model: Dryair DK 40 * Year of manufacture: 12/2021 * Max. pressure: 16 bar * Power: 0.37 kW * 230 V / 50 Hz * Refrigerant: R134a The system is mounted on a compressed air tank and is ready for immediate use as a complete unit. The photos show the actual system being offered. Price: €6,900 net, negotiable plus statutory VAT. Inspection and test run possible by arrangement. Collection preferred. Loading can be arranged by agreement.

Condition: used, This listing is for a Molecular Devices ClonePix 2 2019 with Compressor The Molecular Devices ClonePix 2 Mammalian Colony Picker is a fully automated system for the selection of high-value clones used in antibody discovery and cell line development. The ClonePix 2 picker enables a picking speed of greater than 10,000 clones per day making it 10 times faster than labor-intensive limiting dilution and FACS. The ClonePix 2 by Molecular Devices features multiple detection methods, integrated plate storage, animal-free media and reagents, sterility maintenance, and discrete colony formation Godpfexzg I Ijx Ak Ujug

Condition: good (used), Year of construction: 2020, functionality: limited functionality, machine/vehicle number: ADL 2200/6, total height: 2,200 mm, Insulated glass production line and refrigerator with pumps for water purification a) ADL 2200/6 insulated glass production line b) BM7 butilex applicator, 7 kg c) TMPB 200 two-component extruder d) F-200 refrigerator e) PKM strip cutting machine f) SM 25 strip filling machine Gusdszgu Rhspfx Ak Uog g) R.T.M. rotary table h) Water purifier

Condition: good (used), Year of construction: 2015, functionality: fully functional, Screw Compressor GX5FF EP Main Technical Data (10 bar version): Motor Power: 5.5 kW (7.5 HP) Operating Pressure (max.): 10 bar (e) / 145 psi Free Air Delivery (FAD):* approx. 10.0 l/s to 10.1 l/s Sound Pressure Level: approx. 64-66 dB(A) (very quiet due to soundproof enclosure) Cooling System: Air-cooled Duty Cycle: 100% (suitable for continuous operation) Features & Dimensions (Full Feature - FF): Integrated Refrigerant Dryer: Yes (R134a) Tank Size: Mostly mounted on 200L or 500L tank (typical in 2015) Dimensions (approx.): 1430 mm x 665 mm x 1260 mm (tank-mounted) Weight: approx. 198 kg - 310 kg (depending on tank size) Connection: 1/2" G Gedey H D R Hjpfx Ak Ueug

Condition: excellent (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 6-270D (5 to 13 bar) include Dryer with time controlled drain include 270 liter tank include controller Air Control Basic Godpfx Asx Uqxgok Uoug Year of construction: 2025 Operatin hours: 1 Technical specifications Type: Combi XP 6-270D Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.19 to 0.89 m³/min at 6 bar (g): 0.19 to 0.86 m³/min at 7 bar (g) : 0.19 to 0.82 m³/min at 8 bar (g) : 0.18 to 0.78 m³/min at 9 bar (g) : 0.18 to 0.76 m³/min at 10 bar (g) : 0.18 to 0.69 m³/min at 11 bar (g) : 0.18 to 0.67 m³/min at 12 bar (g) : 0.17 to 0.63 m³/min at 13 bar (g) : 0.17 to 0.59 m³/min Nominal power drive motor: 5.5 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400 V / 73-290 Hz Compressed air connection: 3/4“ G Length: 1530 mm Width: 640 mm Height: 1520 mm Weight: 470 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Made in Germany Guedpfx Akoyb Sdij Uog Good working condition

Year of construction: 2023, condition: ready for operation (used), A complete PVD hard coating system including peripheral equipment is available. 1) PVD hard coating system Platit Pi111 Plus G3, year of manufacture: 2023, deposition process: ARC, cathodes: 2, targets: 2, max. coating diameter: 353mm, max. coating height: 498mm, max. load: 160kg, max. workpiece diameter: 355mm, machine dimensions X/Y/Z: approx. 1950mm/1600mm/2250mm, control system: Platit. 2) Screw compressor Almig F-Drive 22, year of manufacture: 2022, flow rate: 4.14m³/min, final pressure range: 5bar-13bar, motor power: 22kW. 3) Compressed air receiver OKS, year of manufacture: 2023, volume: 1000l, operating pressure min./max.: 0bar/11bar, test pressure: 16bar. 4) Blast cabinet MHG SMG50, year of manufacture: 2024. 5) Osmosis Pro water filtration unit. Documentation available. An on-site inspection is possible. Guodpfxozhb Hlo Ak Uog

Condition: good (used), Year of construction: 2011, operating hours: 10,337 h, overall weight: 3,830 kg, ALMiG Gear 132 screw compressor The screw compressors in the GEAR series are particularly suitable for very high compressed air requirements. The maintenance and service-friendly drive concept of the GEAR compressors includes a robust drive motor with strong power reserves. The highly efficient gearbox works with minimal slip, high operational reliability, is virtually loss-free with an efficiency of > 98% and is gentle on the drive. In addition, highly efficient separation of the cooling medium enables a minimum residual oil content of just 2-3 mg/m³. The encapsulated design of the gear set makes these systems ideal for use under the toughest operating conditions. Ideal for very high compressed air requirements Robust drive unit with high power reserves Virtually loss-free concept with efficiency > 98% Maintenance and service-friendly drive concept ALMiG Gear 132 Year of manufacture 2011 Final pressure 10 bar Motor power 132 kW Volume flow : 18,04 Length 2800 mm Width 1400 mm Height 2025 mm Weight 3830 kg Operating hours 10337 h Load hours: 9378 h Downtime hours 13887 h Total delivery volume 11333000 m³ Financing through our bank is also possible. komplett-konzept.leasingo.de Godsttv Ibspfx Ak Ueug You can find more ALMiG compressors - new and used - in our store! International shipping costs on request!

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW Guodpfx Aswrp Emsk Ujg - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system Gjdpfxszu Aibe Ak Uoug - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Year of construction: 2012, condition: used, functionality: fully functional, Reisner KWR-S 100 HK cooling system Water Temperature 12-16°C Cooling capacity 120kW Winter relief Technical data Chiller KWR-K 100 KS/ Compressor: Piston compressor Volume flow: 110 m³/h Refrigerant: R407c Gsdpfx Akszh E Aws Ujug Speed: 1,450 rpm Cooling capacity: 112 kW Power consumption: 37 kW Coefficient of performance 3.5 (average) Evaporating temperature +7°C Condensation temperature 45°C Operating voltage 400 V-3 PH-50 Hz Cooling capacity (dry cooler) 150 kW Air inlet temperature 35°C Maximum air inlet temperature 45°C Air volume flow 45,600 m³/h Number of fans 4 Current draw per motor 7.2 A Power consumption per motor 0.9 kW (controlled) Operating voltage: 400 V-3 PH-50 Hz Sound pressure level 65.7 dB (A) at 10 m Device length: 5,350 mm Device width: 1,123 mm Device height: 1,150 mm Empty weight: 418 kg

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 100, input voltage: 400 V, track width: 660 mm, type of input current: three-phase, power: 0.4 kW (0.54 HP), input frequency: 50 Hz, electrical fuse: 16 A, Product distributor with 8 outlets and cutting system for kebab strips For sale: complete stand-alone product distributor/splitter with 8 outlets, designed for the even distribution, extrusion, and cutting of kebab strips or similar meat products. The unit is sold as a stand-alone machine, complete with a support frame, pneumatic cutting system, and product conveyor belt. A vacuum filler or other dosing machine is not included. Technical specifications: Product distributor with 8 outlets Splitter model: 160/76/8/DN32 Separate eccentric impeller pump system per outlet Rotors interconnected via a central drive shaft Main housing and impellers made of stainless steel Rotors and rings made of wear-resistant technical polymer Standard product connection: DN65, length approximately 500 mm Outlets equipped with DN32 swivel couplings Outlets at an angle of approximately 30° Shape and dimensions of the extrusion outlets depend on the existing design Includes tools for disassembling the rotors Guodpfszqc U Nox Ak Usg Mobile stainless steel frame Stainless steel C-frame Suitable for positioning above a conveyor belt or packaging machine Mobile on wheels Height adjustable by approximately ±30 mm Robust and hygienic design for use in the food industry Pneumatic cutting system Cutting system for all 8 outlets Pneumatically driven cutting mechanism Mounted on the front of the outlet manifold Stainless steel cutting blade Equipped with a safety guard Includes a safety microswitch Cutting cycle can be synchronized with an external vacuum filler or dosing machine Product conveyor belt Stainless steel construction Variable belt speed Length: approximately 1,000 mm Working height: approximately 900 mm ±50 mm Width adjusted to the 8 product outlets Includes an electrical and pneumatic switch cabinet Equipped with a safety guard and safety switches Suitable for: Kebab strips Meat strips Ground meat and meat products Production across 8 uniform lanes Automatic loading onto a conveyor belt or packaging line

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 700 mm, total height: 1,500 mm, type of input current: three-phase, overall weight: 250 kg, input voltage: 380 V, length stop: 3,000 mm, lifting height: 250 mm, We offer this used OZ MACHINE METEOR - II 420 lightweight aluminum circular saw, manufactured in 2021. Model: METEOR - II 420 Serial number: 018/210023 Year of manufacture: 2021 Total power: 3 kW Frequency: 50–60 Hz Voltage: 400 V AC 3P 1N PE Gujdpfszy Upksx Ak Uog Current: 6.4 A Dimensions (L×W×H): 3760×1080×1325 mm Weight: 264 kg Air pressure: 6–8 bar Air consumption: 38 l/min Idle speed: 3000 r.p.m. Saw blade diameter: 420 mm Includes dust extraction system and compressor. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, axle configuration: 3 axles, first registration: 04/2012, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2012, Axle configuration Tire size: 385/65 R22.5 Axle brand: SAF Gedpfszra Tlsx Ak Usug Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 12 mm Rear axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 12 mm Rear axle 3: Tire tread depth left: 10 mm; Tire tread depth right: 9 mm Weights Unladen weight: 6,595 kg Payload: 32,405 kg GVW: 39,000 kg Condition Damage: None

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 Guedjzy Hrqopfx Ak Ueg • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: Gsdpfx Akszy Hwgo Uoug • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, Year of construction: 1992, Used overhauled Compressor Siad Low and High-pressure System for 1850 CBM: Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022, like new and ready for delivery. Machine has 1850 m3/h of power. Complete replacement of the Baty and replacement of bands, bearings, gaskets, valves. ATLAS Copco ZR4 screw overhaul with replacement of air filter, oil filter and vapor filter, ACS Z oil, shuttle KIT, intake KIT, exhaust silencer filter, flexible coupling replacement, greasing of engine bearings and general compressor control. The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need. The machinery is guaranteed a 12-month or 2000-hour warranty on all replaced components. Only HP / LP tank and dryer need to be added. The two machines, Booster equipment and LP compressor Atlas, were purchased by the same company where they increased its compression power. Rental and short-term rental hypotheses of this Booster equipment can also be considered, with all transport and installation costs borne by the customer. The machines are now available immediately in one of our warehouses, and can be inspected, but it is not possible to start them for obvious reasons of power requirements at start-up. We have a team of technicians specialized in high and low-pressure compressors who can overhaul any unit of the major international brands such as SIAD, A&F, ATLAS COPCO, ABC and many others. Our team is at your disposal to evaluate any overhaul option of your old compressors, and in case of interest one of our employees can contact you to receive all the information necessary to make a first estimate online and possibly schedule a visit to you. It is possible, depending on our stock availability, to arrange a short-term rental during the overhaul time of your old compressor. Maintenance Performed Big end bearing half (1 bearing per connecting rod) Shoulder rings in 2/2 Half (connecting rod) Crank shaft grinding Baty Oil Filter (Succhiarola) Shirt (n 3) Piston rings + oil scraper bands (crosshead) Oil pump filter cartridges Roller bearings Full soft seal (Of phalanx and labyrinth seal) Baty hatch gasket Visual oil warning light Lantern door seals Flywheel Belts 1,2,3 phase cylinders: Piston rod (1,2,3 phase) Sealing rings and relative sealing pack plugs Piston rings + shoes (1,2,3 phase) Complete valve overhaul Head gasket (1,2,3 phase) Valve seat gaskets (1,2,3 phase) Various spare parts: Godjvgurcspfx Ak Usug Air filter Various O-rings Security valves Solenoid valve Various bolts

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 2,500 h, control type: CNC control, controller manufacturer: Beckhoff, laser type: fiber laser, laser source model: MaxPhotonix, laser hours: 1,700 h, laser power: 12,000 W, sheet thickness (max.): 40 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,500 kg, input voltage: 400 V, type of cooling: water, overall weight: 10,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber laser for sale: Machine: Songu Mach 3015 Year 2023 - Put into operation 2024 Power: 12kW MaxPhotonix laser source Gujdpfxeyk Uuie Ak Uog Size: 3x1.5m Working area Working Hours: Total run time - 105days (2520h), Total NC run time 73days (1752h) Operating system: Beckhoff PLC operated from Windows 10 CAM system: Lantek CAM, postprocessor for the machine. Easy to use and conventient. Gas system: Hoerbiger with 3 gas inlets (O2, N2 and compressed air 16BAR/Or anything else) Fully enclosed and with CE marking Safety systems: Opening the door stops the machine and changing table light barriers stop the table changing process (does not stop the machine while working) Table changer: Hydraulic table changer with two pallets. Pallets in the machine remain in the same height, tables are chain driven. Hydraulic liftin capacity 1410kg Alpha direct drive servo drivers for axises with Alpha reducer gears. Laser head: Precitec ProCutter2.0 - spares and consumables available in EU Automatic lubrication of axises and guideways Fume extractor: Donaldson - has big panel filters with automatic cleaning function. Starts when machine starts cutting. Laser frame has sectioned fume extraction system - flaps open up where the laser head is moving. Positioning speed: 100m/min, acceleration 2.4g Accuracy: Positioning +-0,05, Repositioning +-0,03 Weight: Main frame ~8800kg, loading table ~2500kg Camera inside the working area Side access from two doors, front access Elecrical cabinet mounted to the machine Cuts materials like: Mild steel, stainless, aluminium, copper, brass. Example, 20mm mild steel - cutting speed 4m/min (O2), 3mm cutting speed 28m/min (N2) High pressure air compressor: 16Bar compressor for Air cutting, cheaper function for cutting mild steel Uses NC code for cutting, part size is determined from NC and cutter compensation parameter that can be changed from the machine Machine cutting parameters - Fly cut, film burn, small contour, etc. One single parameter consists of 9 different adjustable parameters. Option for nozzle cleaning while cutting and programmable nanojoints (extra small breakaway point for part removal) Automatic focus control Automatic sheet location measuring system Part Stop, Contour Stop, Crash sensor, Low pressure sensors, etc MDI mode for simple sheet trimming funcion Machine bed protected from heat Waste trolleys under the main cutting area and loading table Graphical visualisation on cutting plan Alarm log files Under power, can be tested Location: Tallinn Estonia

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, Container includes the following contents: - 10ft storage container, new / Color: Anthracite grey - SSC-Strong 37 Vario • Speed-controlled screw compressor Guedpfx Aoxc T Evok Ueg • Free air delivery at 8 bar: 6.3 m³/min • Dimensions (LxWxH): 1432 x 1000 x 1480 mm • Weight: 705 kg - 2 compressed air tanks, 500 l each o With AD2000 certification o Horizontal design - 2 Ecomat 31 condensate drains - 2 sets of fittings - SCC refrigerant dryer DRA480 o ISO 8573-1 Class 4 o Refrigerant: R407C o Capacity: 480 m³ - Pre-filter FIL934-P - Fine filter FIL934-M The compressor has seen very little use and therefore has low operating hours. Upon request, we can read the operating hours and run the compressor for demonstration.

Condition: used, Year of construction: 2003, Ingersoll Rand ML45 air compressor (2003), 2 units available. Condition: Used, technically sound, currently disconnected. Manufacturer: Ingersoll Rand (USA) Model: ML45 Guedpfsxu Achox Ak Uog Year of manufacture: 2003 Quantity: 2 units Reliable industrial screw compressors designed for the stable supply of compressed air across various industries – manufacturing, metalworking, pneumatic tools, and automation systems. Key technical specifications (according to Ingersoll Rand ML45 catalogue): - Rated power: 45 kW - Air delivery: approx. 7.5–8.5 m³/min (depending on pressure) - Working pressure: 7–10 bar - Compressor type: oil-lubricated screw - Drive: direct - Power supply: 400 V / 50 Hz - Cooling: air-cooled system - Noise level: approx. 72 dB(A) - Compressor weight: approx. 900 kg Condition description: Both units are currently disconnected but were operational prior to shutdown. Operating hour readings are unknown. Visually – in good technical condition, no damage.

Condition: new, Year of construction: 2026, CORMAK 10 bar Diesel Compressor is a modern, fully independent source of compressed air, designed for professionals who require maximum performance and mobility in the field – wherever access to a fixed electrical power supply is unavailable. The unit combines advanced engineering, European manufacturing precision, and innovative design solutions to ensure reliable operation even under the most demanding working conditions. KEY ADVANTAGES AND FEATURES 10 bar operating pressure: Optimal pressure parameters ensure a stable supply for a wide range of pneumatic tools, construction machinery, sandblasting equipment, and drilling machines. Full mobility on its own wheels: A robust running gear mounted on heavy-duty wheels allows for easy transportation and effortless movement of the compressor directly to the work site. Third jockey wheel on the drawbar: The additional swivelling wheel mounted on the drawbar significantly facilitates precise positioning and manoeuvring of the compressor on construction sites or in confined working areas. Four independent levelling jacks: Allow the machine to be perfectly levelled, even on uneven or difficult construction terrain. Opening housing panels with gas-oil struts: Provide quick and wide access to all service components, ensuring convenient maintenance and periodic inspections. Built-in brake: Enhances safety during transportation and when the unit is parked on slopes. TECHNOLOGY AND PERFORMANCE Godpfx Akszxzcho Ujug CORMAK diesel compressors are designed using high-quality components, resulting in a long service life and low operating costs: High-performance screw air end: The heart of the compressor ensures high effective output, continuous operation, and resistance to intensive use in industrial environments. Sound-insulated and durable enclosure: The robust construction with sound-insulating panels effectively reduces noise levels, improving operator comfort and minimising the impact on the surrounding environment. Advanced cooling system: A specially designed cooler combined with an efficient cooling system ensures optimal thermal conditions, even when operating under heavy loads and at high ambient temperatures. Intuitive control system: The electronic control panel enables full monitoring of key operating parameters, such as pressure and temperature, while facilitating diagnostics and maintenance planning. APPLICATIONS Construction and road construction: Powering pneumatic breakers, drills, wellpoint systems, and machines for plastering and spray painting. Service and field work: An indispensable source of compressed air wherever a 400 V mains power supply is unavailable. Heavy industry and installation work: Rapid support for production and installation processes in the field. TECHNICAL SPECIFICATIONS Parameter Specification Power 42.4 kW Air delivery 5,100 l/min Operating pressure 10 bar Drive transmission Direct drive Compressor cooling system Air/oil Oil capacity 45 L Air outlet valves 3 pcs. Battery 12 V DC – 790 A – 115 Ah Fuel tank capacity 44 L DIESEL ENGINE Parameter Specification System 4-stroke Displacement 2,615 cc Number of cylinders 4 Rated power at 2,000 rpm 42.4 kW Cooling system Air Lubrication system Oil Lubrication system capacity 10.2 L