Used Complete Mechanization for sale (15,801)

Condition: used, Year of construction: 2000, functionality: fully functional, Trimming line consisting of: centering table H42 (factory-overhauled EWD 2000), chipper canter FZ 3 (factory-overhauled EWD 2000), converted to servo cylinder; infeed BNK with square timber centering, BNK 200/6, year of manufacture 2000; board separator ASV, year of manufacture 2000; hydraulic unit; central lubrication. Without electrical control equipment. Dismantled, chipper canter and BNK stored in the hall. Iodjx Tpzdepfx Ah Notb

Condition: used, sheet width 2540 mm plate thickness 2.00 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 63 Hub/min cutting angle 1.13 Grad table height 750 mm table width 320 mm distance between columns 2620 mm back stop - adjustable 5.0 - 550 mm Control konv. engine output 3.0 kW weight of the machine ca. 1600 kg range L-W-H 3100 x 1980 x 1400 mm Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analogue display * adjustable from the front * stepless adjustment over the entire travel range - recessed grips in the support table - 1x hold-down bar - 1x side stop - 3x support arms - 1x freely movable foot switch - operating instructions (PDF) Isdpexacftsfx Ah Notb Special accessories included: - sheet metal holding device for thin sheet metal cuts

Condition: used, sheet width 2040 mm plate thickness 3.0 mm thickness at "Niro-steel" 1.5 mm no. of strokes 50 Hub/min cutting angle 1.4 Grad table height 750 mm distance between columns 2120 mm back stop - adjustable 1.0 - 550 mm column arm 100 mm Iodpfoxaaqaox Ah Njtb Control manuell engine output 5.5 kW weight of the machine ca. 2050 kg. range L-W-H 2600 x 1980 x 1400 mm Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - manual backgauge, with analogue position display * adjustable from the front * Continuous adjustment over the entire travel range * Adjustment range 1.0 - 550 mm - Machine side stand with projection .. 100 mm - manual cutting gap adjustment - 1x hold-down bar - 1x long side stop - 2x support arms - 1x freely movable foot switch - rear sheet metal slide - 2x EMERGENCY stop buttons at the front - Connection cable including plug - original instruction manual * Machine link: ?machineno=1008-9325338

Condition: new, sheet width 1050 mm plate thickness 2,0 mm distance between columns 1050 mm down holder 1 Stück fence Tisch 80 - 480 mm fence Breiten 0 - 600 mm table-size 1300 x 600 mm work height max. 760 mm total power requirement manuell kW weight of the machine ca. 413 kg. Iedjxabdhspfx Ah Notb range L-W-H 2,0 x 1,04 x 1,6 m - Including adjustable stop on the work table for miter cuts - The knife can be lifted easily thanks to the counterweight on the back - Large work table for safe placement of the sheet metal plates - Sheets can be pushed through, i.e. longer sheets can be cut - Handwheel on the front to adjust the back gauge - Comes with a robust cast iron base as standard - Long service life thanks to knives made of quality steel - Standard with hold-down device including quick-release clamp - Robust machine construction for high stability Furnishing: - manual lever shears - stable execution - hold-down bars - Side scale with unit of measurement - Table stop / width stop

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min Itsdpfjxabc Rsx Ah Nob distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: used, Year of construction: 1963, sheet width 1040 mm plate thickness 2.50 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 90 Hub/min cutting angle 2.70 Grad distance between columns 1060 mm work height max. 940 mm back stop - adjustable max. 550 mm column arm 120 mm voltage 400 V engine output 4.0 kW weight of the machine ca. 820 kg. range L-W-H 1650 x 1200 x 1250 mm Equipment: - robust / motorized crank guillotine shears with motor drive - break-proof, torsion-free steel welded construction - compact and clear machine design Itodpfjxach Ijx Ah Nsb - manual back stop, with analog position display * adjustable from behind * continuous adjustment over the entire travel range * travel range max. 550 mm - 1x hold-down bar - 1x side stop - 1x front support arm - original operating instructions

Condition: used, Year of construction: 2016, pressure 20.0 t chamfer lenght 850 mm Iedpfxoxacifj Ah Njtb distance between columns 850 mm back stop - adjustable 375 + 400 mm stroke of upper beam 196 mm dayligth 470 mm ajustment speed 200 mm/sec table height ca. 900 mm total power requirement 5.0 kW weight of the machine ca. 2500 kg New price ~ 85.000 euros well-kept / very good condition (!!) with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil - in checked condition - machine video - ?v=foxzKIA7vX8 Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of different and universally divided tools are possible an almost unlimited variety of areas of application. Furnishing : - Stable machine frame for standing and seated operation - Deformation-optimized press beam - Highly dynamic, electromechanical. Direct drive (servo motor + ball screws) - CNC control Panasonic Toughbook incl. USB and WIFI connection - CNC controlled axes : Y + X + R + Z1 + Z2 - CNC control unit in front right, swivelling - Inductive length measuring system with temperature compensation - Ergonomic machine design - AMADA system upper tool holder - AMADA system lower tool holder - 1x brand new universal tool set (complete) - front safety device (DUAL Laser/Iris Rapid Bend) - Rear security cover - Laterally pivoting protective doors - 2x foot switch, for standing and sitting operation - Support tables comfort (front) - User manual (original) * Special accessories included: - 4-axis backgauge (axes X+R+Z1+Z2) * Speed X axis .. 250 mm/sec * Speed R axis .. 600 mm/sec * Z axis speed .. 1100 mm/sec * Positioning accuracy X axis .. 0.04 mm * Positioning accuracy R axis .. 0.06 mm * Travel X axis .. 375 + 400 mm * Travel R axis .. 180.0 mm

Condition: used, Year of construction: 1996, sheet width 2040 mm plate thickness 4.0 mm ST plate thickness 6.0 mm ALU thickness at "Niro-steel" 2.5 mm distance between columns 2100 mm no. of strokes ca. 32 Hub/min cutting angle 2.0 ° table height ca. 820 mm Control SCHRÖDER / ELGO total power requirement 5.5 kW weight 3250 kg range L-W-H 2400 x 1400 x 1100 mm From a maintenance workshop Current new price approx. 35.000 euros Special price upon request Itsdpoxaa Edefx Ah Neb The MSS motorized guillotine shear was developed for sheet metal and plastic processing. With these shears, you can effortlessly produce clean cuts in series. The MSS "oscillating cut" is the elegant and powerful way to cut. Thanks to the oscillating cut technology, the applied force is optimally converted into a cutting movement, giving the machine power reserves. Features: - Robust, motorized swing-cut guillotine shears - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - NC electro-motorized backgauge * with SCHRÖDER / ELGO NC control unit - Manual cutting gap adjustment * Centralized - adjustable with a simple handle - 1x hold-down bar - 1x sturdy 1.000 mm side stop - including T-slot and mm scale - 2x front support arms 1.000 mm - Grip recesses in the support table - 1x freely movable foot switch - Rear sheet chute - Operating instructions

Condition: used, sheet width 1050 mm plate thickness 3.0 mm thickness at "Niro-steel" 1.5 mm no. of strokes 35 Hub/min cutting angle 2°30 ° engine output 3.0 kW table height 810 mm Itedpfx Ajxablleh Nob weight of the machine ca. 1150 kg. range L-W-H 1300 x 1520 x 1170 mm from a maintenance workshop (!!) Furnishing: - robust electro-motorized metal sheet shears - manual backgauge - adjustable up to 610 mm, using the handwheel from the back - 1x side stop including mm scale - 2x table sheet metal support arms - Piece counter - freely movable foot switch - rear sheet metal slide - EMERGENCY stop button at the front * Machine link: ?machineno=1008-9325126

Condition: used, Year of construction: 2008, sheet width 1530 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 34 Hub/min cutting angle 2.70 Grad distance between columns 1540 mm work height max. 920 mm Control konv. voltage 400 V engine output 3.2 kW weight of the machine ca. 1115 kg. range L-W-H 2275 x 2220 x 1400 mm Features: - Robust motorized swing-arm guillotine shear Ijdjxyln Rjpfx Ah Nstb - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear * Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch - Front, extendable table extension - Rear safety device - Original operating instructions * Optional accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: ready for operation (used), Year of construction: 1997, sheet width 3230 mm plate thickness 2.5 mm thickness at "Niro-steel" 1.5 mm no. of strokes 28 - 42 Hub/min cutting angle 1.60 Grad table height 820 mm distance between columns 3540 mm Control ELGO 87P engine output 6.8 kW weight of the machine ca. 3410 kg. range L-W-H 4070 x 2070 x 1400 mm from a maintenance workshop including special accessories (!!) Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - NC electro-motorized back stop - including NC ELGO "TYP 87P" digital control unit * adjustable from the front right * with target/actual value position input * continuous adjustment over the entire travel range * rough adjustment via push buttons * protection of the limit values ??with limit switch - "Duo-Cut" drive with two dynamic, powerful gear motors - support table with recessed grips - hold-down bar with hard rubber strip - all-steel knife with two cutting edges - selector switch for single and continuous stroke - 1x freely movable foot switch - safety device at the rear - original operating instructions Special accessories included: Itodpfxoxacd Ns Ah Njb - pneumatic sheet holding device for thin sheet metal cuts - 1x extra long side stop, including support foot + digital stop - 2x extra long, front support arms * with "SLIDING" mount - for easy moving

Condition: used, sheet width 3100 mm plate thickness 2.00 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 36 Hub/min cutting angle 0.9 Grad table height 800 mm table width 430 mm distance between columns 3200 mm back stop - adjustable 5.0 - 750 mm Control konv. engine output 3.0 kW weight of the machine ca. 1950 kg range L-W-H 3730 x 2070 x 1400 mm Original price approx. 45.000 euros (!!) Special price on request Features: Itodoxcyw Eepfx Ah Nsb - Robust / motorized swing-cut guillotine shears - Machine with manual material/backgauge * Travel range 5.0 – 750 mm stop depth * Analog position display * Manual adjustment from the front - Break-proof, torsion-free steel welded construction - Compact and clear machine design - 1x hold-down beam * Hold-down opens before the knife beam moves up * No kinking of very sensitive sheets - Manual cutting gap adjustment - Integrated sheet metal holding system for thin sheet metal cuts - Sheet metal/cut material removal at the front (operator side) - 1x side stop with mm scale - 3x table extensions - 1x freely movable foot switch - Operating instructions (PDF

Condition: excellent (used), Year of construction: 2019, Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Stier, drawbar complete with drive from electric hand pallet truck SPT-15 -Drive motor: 24 VDC / 750 W -Delivery/price: complete -Dimensions: 1350/380/H355 mm Itedpfxoizuggo Ah Njb -Weight: 44 kg

Year of construction: 2002, condition: used, fuel type: electric, Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Jungheinrich, drawbar completely from ECC 10 electric pallet truck -Individual components: see photos -Delivery/price: complete Isdpji Aqbgjfx Ah Njtb -Dimensions: 1340/500/H150 mm -Weight: 28 kg

Condition: good (used), Complete unit, compact controller, touchscreen, operator panel, display, PLC, Simatic panel PC -Manufacturer: Siemens -Type: SIMATIC C7-633 DP 6ES7633-2BF02-0AE3 -Dimensions: 240/205/H75 mm -Weight: 1.6 kg Itodpfx Aod Dkzvsh Nsb

Condition: good (used), Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand crimping pliers, sleeve pliers, clamp sleeve pliers -Manufacturer: WMW, hand crimping pliers type PH 2.5C -Crimping: of cable lugs and cable connectors -Pressing force: 25.0 N -Pressing stroke: 15 mm -Transport case: incl. accessories, see photo -Quantity: 1x crimping pliers available -Price: per piece -Dimensions of pliers: 600/180/H25 mm -Total weight: 3.2 kg Isdpfx Ahsb A S Uvj Netb

Condition: used, Furniture rollers, furniture dog plastic rollers, furniture transport trolleys, transport rollers, platform trolleys, transport trolley wheels, heavy duty trolleys, table trolleys, assembly trolleys, complete wheels, tires with rims, Isdpfx Aohbtc Ueh Njtb -Complete wheel: tires, unused -Tire size: 13x5.00-6 -Rim: with bearing inner Ø 15 mm -Material rim: plastic -Quantity: 40 pieces -Price per piece -Dimensions: Ø 310 x 105 mm -Weight: 2kg/piece

Condition: excellent (used), Transport trolleys, platform trolleys, transport trolley wheels, table trolleys, assembly trolleys, complete wheels, tires with rims, stroller wheels, bicycle trailers, stroller wheels Ijdpfehbwc Hox Ah Njtb -Manufacturer: Innova Apse Complete wheel tire with brake for strollers/bicycle trailers/scooters, unused -Tires: 12 1/2 x 2 1/4 (57-203) -Brake: Apse 60 Brake -Quantity: 92 pieces -Price: per piece -Dimensions: Ø 310 x 158 mm -Weight: 1.3 kg/piece

Condition: excellent (used), Transport trolleys, platform trolleys, transport trolley wheels, table trolleys, assembly trolleys, complete wheels, tires with rims, stroller wheels, bicycle trailers, stroller wheels -Manufacturer: Innova Apse complete wheel tire with brake for stroller/bicycle trailer/scooter unused Itedpfx Aehbwc Ujh Nob -Tires: 12 1/2 x 2 1/4 (57-203) -Brake: Apse 60 Brake -Quantity: 72 pieces -Price: per piece -Dimensions total: Ø 310 x 145 mm -Weight: 1.3 kg/piece

Condition: used, Year of construction: 1994, Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Handover: in the current condition as seen Ijdpfx Aji Dyvpsh Notb -Damage: connection cable, drive wheel see photos -Manufacturer: Deca, drawbar complete with drive from pedestrian stacker F2/10/27 -Drive motor: 12V 0.8KW -Individual components: see photos -Dimensions: 1290/380/H300 mm -Weight: 37 kg

Condition: good (used), Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand crimping pliers, sleeve pliers, clamp sleeve pliers -Manufacturer: Klauke, hand crimping pliers type K05 -Crimping: of cable lugs and cable connectors -Standard version: 6 - 50 mm -Dimensions: 390/140/H50 mm Iodpfx Ajwup Efjh Notb -Weight: 1.1 kg

Condition: good (used), Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck Ijdpsi Aqausfx Ah Notb -Manufacturer: Linde, drawbar complete with drive from electric hand pallet truck -Drive motor: Type T 12 24 V -Sale/Price: complete -Dimensions: 1200/440/H290 mm -Weight: 46 kg

Year of construction: 2000, condition: used, fuel type: electric, Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Jungheinrich, drawbar completely from electric pallet truck ECE 20 year construction 2000/2001 -Individual components: see photos -Number: 2x drawbar available, 1x mod. 2000 / 1x mod. 2001 -Delivery/Price: complete per piece -Dimensions: 860/500/H200 mm -Weight: 29 kg Isdpfx Asi Aqaxsh Njtb

Year of construction: 2000, condition: used, fuel type: electric, Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Jungheinrich, drawbar complete with drive from pedestrian stacker type EJE-KmS 16G-24-140-56 -Drive motor: 24 VDC / 1.5 kW -Individual components: see photos -Number: 1x drawbar available -Delivery/Price: per piece -Dimensions: 1585/510/H265 mm Itjdpfxsi Dbzks Ah Nsb -Weight: 82 kg/pc.

Condition: good (used), Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Linde, tiller complete with drive from electric high-lift truck L 12 -Drive motor: Type T 12 24 V -Submission/Price: complete -Transport dimensions: 1200/440/H270 mm -Weight: 44 kg Itsdpfxjxd T S Ee Ah Nsb