Used Complete Mechanization for sale (15,175)

Condition: used, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Ibedpfxow Ahg Rj Afisc Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Date Coding, Thermal Control, and Final Packing In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line.

Condition: excellent (used), Transport trolleys, platform trolleys, transport trolley wheels, table trolleys, assembly trolleys, complete wheels, tires with rims, stroller wheels, bicycle trailers, stroller wheels -Manufacturer: Innova Apse complete wheel tire with brake for stroller/bicycle trailer/scooter unused -Tires: 12 1/2 x 2 1/4 (57-203) -Brake: Apse 60 Brake Iedpfx Ajhbwc Ujfijbc -Quantity: 72 pieces -Price: per piece -Dimensions total: Ø 310 x 145 mm -Weight: 1.3 kg/piece

Condition: excellent (used), Year of construction: 2008, For sale complete PVC carpentry production line, brand URBAN, composed of: *1. Welding machine at 2 ends; URBAN brand, model: AKS 5305-FF, serial number: 53372, year of manufacture: 2007, perfect working condition; *2. Channel milling machine; URBAN brand, model: WS 103, serial number: 790, year of manufacture 2007, perfect working condition; *3. 2-headed saw: brand RAPID, model DGS 100, serial number: 004606128, year of manufacture 2010, sold together with vacuum cleaner with bags, perfect working condition; *4. MACC rebar cutting saw, model NEW 275, serial number: 88266, year of manufacture 2008, perfect working condition; *5. Pantograph brand URBAN, model MLA A23 – 100466321S, serial number: 528-0, year of manufacture: 2008, perfect working condition; 6. Upright milling machine: URBAN brand, model M7CRH-100149891, serial number 559, year of manufacture 2008, perfect working condition; *7. De burring machine with 2 groups of cutters; brand URBAN, model SV 280, serial number: 29342, year of manufacture 2008, perfect working condition; *8. Saw for cutting sticks: brand URBAN, model GLS 102; serial number: 102015; year of manufacture 2010, perfect working condition; The production capacity of the line is 30-50 units/8h (depending on the number of people serving the line). The line was used very little from 2010 to 2014, and not at maximum capacity. We can also sell individual machines on request from the line. Ibedpfx Ajucl Dcsfijc Net price complete line 33.500 Euro + VAT, negotiable, FCA Oradea.

Condition: used, Mini bundeling mechanization IDL000770 Ijdst Ebndepfx Afiebc - manufacturer Jonab

Condition: used, Year of construction: 1993, Shredder brand Kara type KV-2512-300-30 Power: 55 kW Roller length: 1250 mm Roller diameter: 300 mm Sieve holes: ø 15 mm Number of teeth: 24 Tooth size: 30 x 30 x 15 mm Funnel size: 1250 x 2700 mm Iedotyim Sepfx Afiobc Dimensions approx. 5200 x 1900 x 2490 mm Weight approx. 6000 kg Incl. horizontal conveyors, approx. 12 meters, angled approx. 6 meters Capable of shredding almost all types of wood!

Condition: used, functionality: fully functional, Equipment: cabin, For Sale: Complete Log Sawing Line Complete log sawing line in excellent condition, ideal for professionals in the wood industry. This robust and high-performance equipment will allow you to optimize your production. Technical details: 23.5 m bark conveyor Storage capacity for 30 logs over a 16 m length 5 stops 4 log turners 5 flippers Double-guided log clamp with independent HYDRAULIC output Straightening function for better log alignment Powerful and precise winch for optimal control 30 m ejection rollers with 4 Left/Right ejections Complete operator cabin, excellent condition Other features: 140 frame LBL slabber Loader Pre-crosscut saw Isdpfxjxdc H Ej Afiobc Hydraulic carriage with 5 stops, Gillet brand Complete mechanization for increased performance For more information, photos, or to arrange a visit, please contact us!

Condition: used, Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h General description of the line The Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h provides an industrial configuration specifically designed for the sterile filling of liquid food products. It particularly suits sensitive items such as UHT milk and fruit juices, which require controlled processing environments. Moreover, the system operates with 1-liter square containers and reaches a production capacity of 7,000 liters per hour. As a result, it ensures high microbiological quality standards. In this configuration, each machine plays a critical role in maintaining aseptic conditions from filling to final packaging. Aseptic filler Tetra Pak A3 FLEX At the heart of the Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h, the Tetra Pak A3 FLEX filler (version 100V), manufactured in 2004, performs aseptic filling using an integrated sterilization system, microbial barrier, and precise dosing mechanisms. Consequently, it processes pasteurized or sterilized products intended for extended shelf life and keeps them intact without requiring refrigeration. Furthermore, the filler maintains a sterile environment throughout the entire cycle. In addition, it ensures consistent product dosing and eliminates variability in filling performance. As a result, manufacturers can rely on this equipment to meet strict food safety requirements. Aseptic capper Tetra Pak TCA88 The line also includes the Tetra Pak TCA88 capper, built in 2006. This module applies plastic caps to filled containers using induction or mechanical systems that ensure hermetic sealing in an aseptic environment. Moreover, the capper synchronizes precisely with the filler to ensure uninterrupted operation. In contrast to conventional systems, this integration significantly reduces the risk of contamination after filling. In the same way, the TCA88 includes built-in quality control functions that verify each cap’s position and torque. Meanwhile, Tetra Pak designed the unit with safety features such as interlocked guards and error monitoring systems, ensuring full compliance with industry standards. Cardboard packer TCBP70 in this used aseptic filling line Tetra Pak Ibsdpswkux Nsfx Afisc The Tetra Pak TCBP70 packer, manufactured in 2007, manages secondary packaging. This automatic system forms and fills corrugated cartons using wrap-around or preformed box configurations. Similarly, it operates with fully electronic controls that allow real-time adjustment and monitoring. Therefore, the machine supports flexible packaging layouts and rapid format changes. In addition, the TCBP70 includes safety systems such as light curtains and emergency stop devices. For example, if an operator enters the guarded zone, the system halts automatically to prevent accidents. As a result, the packaging process remains both efficient and secure. Industrial applications and operational benefits The Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h targets producers in the dairy and beverage industries who require aseptic packaging capabilities.

Condition: excellent (used), Year of construction: 2008, operating hours: 19,000 h, functionality: fully functional, Equipment: documentation/manual, We are offering a well-maintained, pre-owned complete SACMI bottling line with a high output capacity of up to 60,000 bottles per hour, suitable for carbonated soft drinks, flavored mineral waters, soda, and similar beverages. The line is configured for glass bottles (200ml and 250ml) and is equipped with premium European components. Initially installed in 2008, this equipment has been meticulously maintained, is in excellent working order, and ensures reliable as well as efficient operation. The line remains operational and in current production. ✅ Line Composition: DEPALLETIZER – SACMI MT565 - Capacity: 60,000 BPH - Automatic divider magazine & mesh conveyor - Siemens PLC with touch panel RINSER-FILLER-CAPPER Monoblock – SACMI VEGA 72/84/24/24 - Capacity: 50,000 BPH - 84 electropneumatic filling valves, 72 rinser grippers - Dual capping units: Crown (metal Ø26 mm) and Screw cap (aluminum) – AROL - Suitable for carbonated products (counterpressure filling) - Integrated CIP system, automatic level control MIXER – SACMI Crystal Mix - Capacity: 10,000 L/h - CO₂ blending, recipe management, stainless steel construction - Siemens PLC with Profibus communication LABELLING MACHINE – PE Labellers Executive x 2 - Single machine capacity: 30,000 BPH - The line includes two labeling machines! - Cold glue system, single station with quick format change - High-quality labeling with glue thickness adjustment SHRINK WRAPPER – SMI SK800 F (6-pack) - Capacity: 60,000 BPH - Fully automatic with integrated shrink tunnel and servo drive - Compatible with printed and plain film SHRINK WRAPPER – SMI SK450 T (24-pack) - Capacity: 60,000 BPH - Bundles 6-packs into 4x6 or 20-tray shipping formats - Includes shrink tunnel, carton tray option PALLETIZER – Emmeti MT 574/2 - Capacity: 60,000 BPH Iedpow Dc D Hofx Afiebc - Suitable for Euro and industrial pallets - Automatic pallet feeder and divider insertion STRETCH WRAPPER – SACMI - Capacity: 30 pallets/hour - Rotary arm system, programmable film tension CONVEYOR SYSTEM – SACMI - Fully integrated line with speed synchronization - Stainless steel bottle conveyors, soft plastic chain conveyors for packs - Brands: Bonfiglioli motors, Omron frequency inverters ⭐ Highlights: - High-speed performance: up to 60,000 BPH - Designed for carbonated beverage bottling (soda, mineral water, flavored drinks) - Fully automated system with Siemens & Omron controls - All equipment manufactured in Italy and Germany - Line is in excellent technical condition - Includes complete conveyor system and auxiliary equipment - Ready for prompt dismantling and shipment 📍 Year of manufacture: 2008 📦 Bottle format: 200ml, 250ml (GLASS) 📞 Contact us now for technical documentation, layout drawings, or to arrange an inspection.

Condition: excellent (used), Year of construction: 2023, operating hours: 300 h, functionality: fully functional, Logosol B1001 Hydraulic – Fully equipped with feed unit & kerf calculator Featuring hydraulic system, almost full equipment, in very good and well-maintained condition. The saw has been serviced regularly, is TÜV-certified and runs absolutely reliably. The machine is immediately ready for use. Ideal for professional applications or ambitious woodworkers who value performance and quality. Equipment & Details: • Hydraulic system for comfortable and efficient operation • Feed unit & kerf calculator included • Cutting length up to approx. 6.8 m Ibjdoxc Ufkjpfx Afijc • Cuts logs up to 1 m in diameter • Robust construction, precise cuts, easy operation

Year of construction: 2021, condition: good (used), machine/vehicle number: 3342, Carer COMPLETE FRONT-END from Uniktruck Isdpfxjul D Rhe Afijbc

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Inkjet printer Breva IJet 2L - top printer for personalized printing! Are you looking for a compact, easy-to-use and reliable solution for high-quality printing of various materials and objects? Breva IJet 2L is the answer to your needs. This top-of-the-line printer made in Italy allows you to: - Print a wide range of materials - plastic, wood, glass, metal, leather, textiles, paper and cardboard - Print texts, images, logos, barcodes and QR codes in top quality - Easy and intuitive operation thanks to sophisticated software - Low operating costs and maintenance-free operation - Flexible settings for various applications and industries Breva IJet 2L is used for printing sporting goods (golf, tennis), glasses, cosmetics, wine, coffee, wedding and event accessories and in many other areas. The printer is in perfect condition. The price includes 4 cartridges with different colors. Specifications Printing technology Flatbed inkjet technology Number of print heads 1 print head/integral cartridge Ink type UV, solvent and water-based inks Supported materials Plastics, wood, glass, metals (including aluminum), leather, leatherette, textiles, paper and cardboard Print resolution Options: Draft, Normal, High quality Building area size: 390 x 330 mm Maximum print area: 150 x 170 mm Maximum object height: Standard 50 mm; in some versions up to 80 mm, with the possibility of extension to 300 mm  Interface USB Iodpjv Sk Nbjfx Afiobc Supported OS: Microsoft® Windows 10 Power supply 110 - 240 V, 50/60 Hz; max. 120 W Operating temperature 18 - 32 °C Relative humidity 50 - 70% Printer dimensions (W x D x H) 474 x 522 x 260 mm Printer weight 9.7 kg Software Breva Control Center, Scribus Supported file formats PDF, PNG, JPG, BMP, EPS, TIF

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 152, Excellent condition/ready to work. Ibodoxc Dtqjpfx Afioc

Condition: used, Used UHT Milk Preparation Room Tetra Pak 6600 L/h Technical Overview of the System The Used UHT Milk Preparation Room Tetra Pak 6600 L/h provides a complete solution for the aseptic preparation of UHT milk, drinking yoghurt, juices, and flavored beverages. Currently in storage and ready for reinstallation, the system delivers high thermal and microbiological efficiency. Moreover, its modular design allows it to operate at 2640 L/h, 3850 L/h, and up to 6600 L/h in full configuration. Therefore, it adapts well to varying production demands. Isdpfswqxhhex Afijbc Homogenization Section At the core of the Used UHT Milk Preparation Room Tetra Pak 6600 L/h lies a Tetra Pak homogenizer, model Tetra Alex, which ensures effective fat globule size reduction and consistent product texture. As a result, it stabilizes complex emulsions such as flavored milk or drinking yoghurt and prevents phase separation during storage. Importantly, this homogenizer is non-aseptic and operates upstream of the UHT sterilization process, which eliminates any microbial load introduced during homogenization. Furthermore, the homogenizer supports high working pressures and simplifies maintenance. In addition, the robust construction ensures long-term reliability. Integrated Deaeration System The system includes a Tetra Pak deaerator (2005) equipped with an auxiliary pump and tank. Specifically, this component removes dissolved oxygen and unwanted gases from the product before thermal processing. Consequently, it improves product stability and reduces oxidation. Additionally, the vertical configuration ensures efficient gas separation. Meanwhile, the design minimizes product loss and guarantees a continuous flow to the next stage. High-Performance Tubular UHT Module Thermal sterilization occurs through a tubular UHT heat exchanger, manufactured by Tetra Pak and model Tetra Therm Aseptic. In particular, this component sterilizes products via indirect heat exchange while preserving organoleptic properties. Importantly, the module includes a holding coil to maintain temperature over a defined time span. Thus, it complies with food safety regulations and ensures microbiological safety. Similarly, its modular design allows for easy integration into existing lines. Electronic Control and Automation The line features an electrical control panel, a Siemens PLC, and operator panels for precise management of each phase. Notably, it includes detailed electrical schematics, Festo pneumatic valves, and Danfoss inverters to dynamically control pumps and heat exchangers. As such, the automation enables continuous processing. Besides, it optimizes the CIP cycles, reduces downtime, and enhances traceability. Above all, it ensures reliable performance across diverse operating conditions. Conclusion In summary, the Used UHT Milk Preparation Room Tetra Pak 6600 L/h offers a complete, high-efficiency system for preparing UHT milk and beverages. Thanks to its top-tier components and scalable design, this line stands as an ideal choice for dairy producers. Whether the goal is reliability, hygiene, or adaptability, this solution meets strict industry standards. Finally, the system remains in storage and is available for immediate installation.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating speed: 104 mm/s, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, sheet thickness steel (max.): 6 mm, type of input current: three-phase, Equipment: emergency stop, We have for sale a complete production line for gutters and pipes with nozzle, according to the following specification. Gutter roll-forming machine – Gasparini 2019 Gutter length: 1.5–6 m width: 105–192 mm Decoiler: up to 3 tons Processes any material + film coating Edge folding: 18 or 20 mm Material thickness: 0.5–0.6 mm Output: 3000 m / 8h Additionally, we offer a pipe forming machine Metalprodukt 2015 Detail diameter: 100 mm Length: 1–6 m Thickness: 0.5–0.6 mm Film coating Automatic socketing Output: 2500 m / 8h Pipe forming machine – Alatnicabarovic 2011 Same – detail diameter: 100 mm or 120 mm Length: 1–6 m Thickness: 0.5–0.6 mm Film coating Manual socketing Isdsxcxbcopfx Afijbc Output: 2500 m / 8h Nozzle 2024 Manual production Alatnicabarovic from 2011 Nozzle from 2024

Condition: used, operating hours: 1,000 h, Used Filling Line Doypack / Tetra pak 600 kg/h Technical Configuration of the Filling Line The Used Filling Line Doypack / Tetra pak 600 kg/h includes a sequence of machines from 2015 that deliver precision, hygiene, and reliability in filling flexible pouches. Initially, the process starts with a Contherm heat exchanger from Tetra Pak, which continuously processes medium- to high-viscosity products. As a result, it maintains uniform temperature and ensures product stability. Subsequently, an FL Tecnics machine—model FL 2.2—handles pouch feeding, weight-based filling, sealing, and packaging. In particular, a VARPE control system measures product weight in each pouch with high precision, thus minimizing variation and waste. At the same time, another VARPE unit performs X-ray inspection, which detects any contaminants or structural issues. Consequently, this adds a critical layer of safety and quality control. Meanwhile, a spiral air-flow pasteurizer manufactured by SARP performs the pasteurization phase. Unlike other systems, this design treats the product uniformly while preserving its sensory characteristics. Taken together, these components enable the Used Filling Line Doypack / Tetra pak 600 kg/h to deliver a safe, consistent, and high-performance packaging operation. Production Performance and Operating Condition The Used Filling Line Doypack / Tetra pak 600 kg/h processes up to 600 kilograms of product per hour. Thanks to its engineering, it maintains consistent dosing and minimizes downtime. Its weight-based filling system ensures accurate volumes in each pouch, thereby reducing overfill and adhering to production specifications. Notably, the line has only operated for about 1,000 hours, during which it produced around 5 million pouches. Given this, the system remains in near-new condition. Therefore, facilities can expect long-term reliability with minimal wear. In terms of maintenance, this translates to reduced operational costs and higher uptime. Versatility in Product Type and Formats of the Used Filling Line Doypack / Tetra pak The Used Filling Line Doypack / Tetra pak works with 0.10-liter pouch formats, using precision weight-based filling. Due to this, operators can process a wide variety of products, including baby food, ready-to-drink beverages, dairy items, sauces, and creams. More importantly, technicians can easily adjust dosing parameters to suit different product viscosities or packaging standards. Accordingly, this system provides high flexibility for companies handling multiple product lines. Furthermore, weight-based filling enhances yield accuracy, which helps manufacturers meet labeling and legal compliance requirements. Iodjvguc Ujpfx Afiebc Operational Safety and Technical Documentation Each machine in the Used Filling Line Doypack / Tetra pak includes integrated safety features that meet European standards. These include mechanical guards, interlocks, and alarms that proactively protect personnel.

Condition: used, Used Wine Filling Line 2000 Complete line for still wine filling, consisting of the following machines: Used Depalletizer Automatic depalletizer branded Oma model Depalblock 2000 built in 2002. It reaches speeds of 6000 BPH for the 0.75 lt format. In addition to that it works formats such as bottles of 0.375 – 0.75 and 1.50. This used depalletizer is supplied with all its accident prevention protections and also the user manuals. The loading is carried out from above and there is neither an interlayer removal system nor a pallet magazine. Instead, there are spare parts available. Measurements: Length: 2950 mm Width: 2133 mm Height: 2530 mm Weight: 1550 kg. Volt consumption: 380 Kw: 2 Hz: 50 Used Filling Monoblock of this Used Wine Filling Line The manufacturer of this monoblock is Ave Impianti, and it is an Oceanic 16-16-4 model. It works with the same formats from 0.375 – 0.750 – 1.500 at a speed of 3800 BPH. The direction of rotation is clockwise, and the state is currently in production. Ibedpjvguttefx Afijc This machine is currently used for filling still wine. This machine includes also a rinsing machine that has 16 forceps and does 2 treatments. Then follows the 16-valve filler with a fixed nozzle. Finally, there is the 4-head cork stopper that can process a diameter of up to 26 mm. There are several spare parts for this machine. Measurements: Length: 4600mm Width: 2300mm Height: 3400mm Consumption Volt: 380 Hz: 50 Used Capper The used Capper is Bertolaso branded and the model is Alfa 110 Inox from 1995 with 1 head. Clockwise rotation direction, is always complete with all available manual and accident prevention protections. The operational status is currently in production and the type of container handled is 0.75 liter Bordolese. The cap type is Stelvin and the size is 30×60, while the neck type is standard. Measurements: Length: 800mm Width: 900mm Height: 2600mm Volt consumption: 380 Used Capsuler This machine is branded Robino and Galandrino model Fenix 2 of the year 2000. It is a used capsuler with 2 heads and the speed reached is 6000 BPH with the following formats: 0.375 – 0.750 – 1.500. There are safety protections and manuals are also available with the necessary instructions. The state is currently in production. The specific product treated is still wine. The types of capsules used are the Enoterms in Polylaminate. Weight: approx. 1800 kg Consumption Volt: 380 Kw: 4.5 Hz: 50 Used Labeling Machine of this Used Wine Filling Line Branded Kosme Model Extra Fix 8T S3 E3 + S2 E2 Adhesives year 2005. Speed of 3000 BPH on the treated formats of 0.375 – 0.750 – 1.500 L. Machine currently in production in the line with its accident prevention protections and user manuals available.

Condition: used, Used Wine Bottling Line For Glass Bottles of 3L – 2000 BPH Technical features: 150 mm chain Production: 2000 carboys per hour Voltage: 380 Low voltage: 24v Frequency: 50Hz Working direction: right to the left Worktop height: 1240mm Carboy base format diameter: 51, 179 × 340 This line includes big italian brands, like Bardi, Bertolaso and Cavagnino&Gatti. The bottling line ends with labelling equipment, so different packing systems can be attached as needed. This can be standard cardboard boxes or tray plus film or wrap-around system closure. The two bottle sizes worked are 1,5L and 3 L but if needed this can be adapted for 0,75 L too. With additional payment it can be upgraded to create equipment for the inlet and outlet, the 0,75 L bottle size. It has a satin cork corker and aluminium screw cap capper, and an 8 head labeller with two adhesive stations. It performs gravity filling for still liquids. The washer  is for cleaning the new bottles inside and outside for one-way production. Regular maintenance has been done on all equipment of the line, so it can be reassembled without critical problems. Iedpjvguwljfx Afiobc Our professional team can help you realize this project, supporting you both in the tech department and with an engineering consultant.  

Condition: used, Used Isobaric Complete PET Line for Soft Drinks 6000 bottles/h The line consists of: A Kosme KSB 4 L PET blow molding machine from 2004 with a speed of 6800 bottles/h for 0,5L, 6000 bottles/h for 2L, 5200 bottles/h for 2,5L Air conveyor from blowing machine to filler. MAS Mixer from 2004. MAS rinser, filler and capper from 2004, renovated in 2015, capacity 0,5l – 10.000 palack/h, 1,5l – 5000 units, rinser cranes – 32 units, filling valves – 32 units, cork heads – 8 units. BAT forum labeller type EBI 07 year 2006, capacity 1500-6500 units/hour, dimensions 2450x90x950-1300. BAR forum packer year 2005, capacity 12 packages/min. Isdpfx Asvguyaofijbc Conveyors, Cyklop International automatic stretch wrapper type GL215 year 2003, turntable 8 mm steel plate resting on 12 supporting rollers, feeder ramp 5 positions possible, power supply 230/440V, three-phase, 50Hz+Neutral; pallet load length/width max. diameter of 1675mm (*2000mm), pallet height – 2200mm (*2600mm), pallet weight max 1500kg (*2000 kg)

Condition: used, operating hours: 52,428 h, Used Bottling Line for Sparkling Beverages up to 9000 bph The used bottling line for sparkling beverages up to 9000 bph effectively manages the production of still and sparkling water, as well as soft drinks, in PET containers. This line features interconnected machines, which, together, ensure a continuous and effective workflow. Additionally, each machine in the line operates in isobaric mode, optimizing filling for sparkling beverages. As a result, the system handles up to 9000 bottles per hour, making it a powerful solution for high-output bottling. Containers and Product Type in the Bottling Line For sparkling beverages The system, specifically designed to fill PET containers, provides durability and lightness, making them ideal for both sparkling and still beverages. Furthermore, this line specializes in processing still and sparkling water, along with other non-alcoholic drinks. Using isobaric technology, the line effectively preserves effervescence throughout filling, which, in turn, maintains product integrity and enhances taste quality. Blow Molding Machine – SMI EBS 2016 The SMI EBS blow molding machine, model EBS from 2016, forms PET containers directly on-site. Specifically, it transforms preforms into bottles, ensuring consistent size and container strength. Therefore, this integrated blow molding machine increases efficiency by minimizing reliance on external bottle supplies and maintaining high-quality production standards for the CFT Bottling Line For sparkling beverages. Filling Monoblock – CFT Master EW 32/32/8 2012 The CFT Master EW 32/32/8 filling monoblock, a central component of the used bottling line for sparkling beverages up to 9000 bph, combines rinsing, filling, and capping in one compact unit. Notably, this system uses isobaric filling to keep internal container pressure stable, which is especially beneficial for carbonated beverages. In this way, the setup reduces waste and effectively protects the product’s quality. Ibedpjvgvbrsfx Afisc Labeling Machine – P.E. Labellers Universal M/S 15T/960/3S – 4E 2009 The P.E. Labellers labeling machine, model Universal M/S 15T/960/3S – 4E from 2009, applies labels to PET containers with precision. Label application helps with product identification, in addition to ensuring regulatory compliance. Furthermore, this model offers flexibility and accuracy, especially for containers of various shapes and sizes for the CFT Bottling Line For sparkling beverages Sleevering Machine – Nortan NORTAN 50 2008 The Nortan NORTAN 50 sleevering machine from 2008 of the CFT Bottling Line For sparkling beverages adds protective sleeves to containers, enhancing aesthetics and protecting them from contamination. In addition, this process proves essential for beverages stored or transported over long periods. Thus, the used bottling line for sparkling beverages up to 9000 bph benefits from this feature by improving product durability on store shelves.

Condition: used, Used Bottling Line BERTOLASO for still wine and alcoholic beverages 4000 bph 0.75L The BERTOLASO used bottling line for still wine and alcoholic beverages operates at different speeds depending on the bottle size. Firstly, the machine fills 0.75 L bottles at a maximum speed of 4000 bottles per hour (BPH). Additionally, it processes 1.5 L bottles at 3000 BPH. Moreover, for 0.50 L bottles, it reaches 5000 BPH, and for the 0.25 L format, it achieves 8000 BPH. As a result, this flexibility allows the machine to adapt to various production needs. Technical characteristics of containers and filling The line fills glass containers of multiple sizes using the low vacuum filling method. In particular, this method ensures delicate handling of products like still wine and alcoholic beverages by minimizing oxygen exposure during bottling. Consequently, it reduces product oxidation and preserves the organoleptic qualities of the liquids. Furthermore, this method guarantees high-quality preservation, making it an ideal choice for producers. Compressor details Ibedpfsvgvgbsx Afijc Next, two compressors ensure a constant supply of compressed air. The Abac VT 1510 compressor, manufactured in 1999, operates at 10 bar. In addition, the ALMiG Flex 15 compressor, built in 2011, provides 11 bar of pressure. Together, these compressors maintain efficient and reliable plant operations, thus ensuring uninterrupted production. Handling and filling machines Moving forward, the Bortolin Kemo F.C.T depalletizer, made in 1994, automatically moves the empty bottles. Meanwhile, the Cobert Ambra 24 filling machine from 1995 ensures precise and reliable filling. For capping, the line uses two machines: the Bertolaso Sigma from 1995 and the SIEM Ta77 from 2007, which provide compatibility with various cap types. In this way, the system maintains versatility. Additional support machines Moreover, the line includes an Enos capsuling machine from 2002. Similarly, it also uses two labeling machines: the P.E. Labellers Modular Plus 450-5-4P-0-2 from 2014 and the BRB Globus Mega-s from 1999, which applies labels with cold glue. Afterward, the Bortolin case erector from 1994 forms the cases, while the Bortolin case packer, also from 1994, packs them. Finally, the SOCO System case sealer from 1998 seals the cases. At the end of the process, the Cosmapack palletizer and pallet wrapper from 2002 handle the palletizing and wrapping procedures. Conclusion of the Used bottling Line BERTOLASO for still wine and alcholic beverages 4000 bph 0.75L To summarize, this used bottling line offers producers of still wine and alcoholic beverages flexible and reliable production. Because of its ability to work at different speeds and handle multiple formats, the Used bottling Line BERTOLASO for still wine and alcoholic beverages 4000 bph 0.75L provides a versatile solution for various product requirements. Therefore, it stands out as an ideal system for meeting diverse production goals.

Condition: used, Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH Introduction ot the Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH The Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH  processes 0.75-liter glass bottles with high efficiency. Since this line handles sparkling wines, spumante, and still wines, it integrates specialized machinery that delivers precision, quality, and reliability. Consequently, it streamlines operations from bottle preparation to final palletizing, ensuring seamless production. Components of the Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH Bortolin Kemo DEPALTERM SP/02/V Depalletizer (2014) In the Used Isobaric Bottling Line for Sparkling Wine, the Bortolin Kemo DEPALTERM SP/02/V, built in 2014, automates the handling and sorting of glass bottle pallets. Notably, its AISI 304 stainless steel structure resists corrosion and meets strict hygiene requirements in production environments. The depalletizer uses robotic grippers to lift entire bottle layers from pallets. Meanwhile, high-resolution optical sensors monitor the container positions, synchronizing the gripping cycle with the rest of the line. CIP Procomac UNIFLUX 2000 in the Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH Ibodovgvmhspfx Afioc The Procomac UNIFLUX 2000 CIP system performs in-situ cleaning and sanitization of the bottling line equipment. To enhance efficiency, the system includes AISI 316L stainless steel tanks with electropolished surfaces that resist chemical detergents and sanitizing solutions. Moreover, its variable flow rate reaches 15 m³/h, ensuring efficient circulation of cleaning solutions. In the Used Isobaric Bottling Line 9000 bph the CIP system executes sequential cleaning cycles. First, it starts with a pre-rinse using demineralized water to remove large residues. Then, it washes the equipment with alkaline detergents, dissolving organic residues. Afterward, an intermediate rinse eliminates detergents before the system performs final sanitization with acidic or sterilizing solutions. Procomac 32.56.8.8 Filling Monoblock (2000) The Procomac 32.56.8.8 filling monoblock, built in 2000, serves as the core of this bottling line. It efficiently fills sparkling wines, frizzante, and still wines while maintaining product integrity. Consequently, it ensures high performance throughout the entire production process. The rinsing unit features 32 rotary nozzles that thoroughly clean bottles before filling. Furthermore, it supports 28mm standard necks and operates with full automation to remove impurities. The Corfill Sara Elp 32, manufactured in 2012, fills bottles with 56 stainless steel filling valves (AISI 316). Because these valves resist corrosion, they ensure accurate dosage. Additionally, the isobaric system maintains constant pressure, preserving carbonation and product quality. Since the Siemens PLC optimizes operations, it adjusts quickly to handle various product types efficiently.

Condition: used, Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 3500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 3,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. Ijdpfx Afew Imp Heiebc The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforward maintenance and integration into existing plant automation. The entire layout follows a linear configuration, optimised for space utilisation and ensuring smooth product transfer between each stage without unnecessary accumulation points. Bottling Process and Core Machinery At the start of the line, empty bottles are automatically fed into the system via a depalletizer. This equipment gently lifts and transfers the bottles onto the feeding table while maintaining their integrity. Bottles are then directed to the tribloc system, where three key operations are performed in sequence: rinsing, filling, and capping. The isobaric filling technology ensures precise fill levels and consistent carbonation retention for sparkling wines, while also being perfectly suited for still wine bottling. The filling valves are designed to minimise oxygen pickup, which is crucial for preserving the wine’s sensory qualities and shelf life. The rinser operates with clean water or a sanitising solution, ensuring bottles are free from contaminants prior to filling. The capping turret, currently configured for still wine closures, applies either BVS screw caps or traditional corks, depending on the selected format. A dosing unit for gum arabic is integrated into the line. This system allows for precise addition of stabilising agents post-filling, which helps maintain wine clarity and prevent precipitation during storage. A dedicated steam generator (vapouriser) is included for both line sanitisation and, when required, pre-heating applications. Prior to filling, a microfiltration unit is positioned to ensure that the product entering the tribloc meets the desired microbiological standards. This step is essential for ensuring product stability and quality without the need for excessive chemical preservatives. Downstream, bottles are transferred to the labelling station. While the labelling unit is supplied by a third-party manufacturer, it is electrically integrated into the line and can be configured for multiple label types, including adhesive and cold-glue systems.

Condition: used, Used bottling line SIDEL for still water in PET bottles 25200 bph The used bottling line SIDEL for still water in PET bottles 25200 bph provides a complete solution for bottling still water. Currently, the line remains connected to power, so buyers can test it directly. SIDEL designed the system in 2006 to handle PET bottles ranging from 350 ml to 1.5 liters. As a result, the line maintains high productivity and flexibility. General line data This used bottling line SIDEL for still water in PET bottles 25200 bph processes up to 25200 bottles per hour. Specifically, it uses 30/25 neck-type bottles, which match standard formats across the industry. SIDEL equipped the line with a SB014 blow molder featuring 14 cavities. Furthermore, the filling and capping monoblock includes 40 filling valves and 10 capping heads, making it suitable for still products. Main installed machines The line includes, among other components, an AF high-pressure compressor (model CE46A) and a Fusheng low-pressure compressor (model SA110A). In addition, a BAC cooling tower manages process temperatures effectively. The SIDEL SB014 blow molder, which includes a hopper, feeder, and dust remover, connects directly to the SIDEL SFGL40/10 filling machine. Consequently, the line maintains efficiency across all stages. Labeling and packaging SIDEL integrated a Rollquattro labeler that applies roll-fed wraparound labels with precision. Moreover, a shrink-wrapper creates stable multi-pack bundles using plastic film. The VANTA WSD-B350 carton packer, built in 2011, handles up to 35 cartons per minute. Likewise, a palletizer automates the end-of-line phase, thereby preparing products for shipment. Conveying system and internal logistics The conveying system uses SIDEL-built conveyors throughout the process. Accordingly, the line ensures uninterrupted flow from the blow molder to the palletizer. Thanks to this automation, the system reduces manual intervention and improves consistency. In contrast to fragmented setups, this configuration enhances operational control and reduces downtime. Operating conditions and advantages This used bottling line SIDEL for still water in PET bottles 25200 bph operates under power and remains available for on-site testing. In practice, the integration of SIDEL machines improves performance while simplifying maintenance. As such, operators can rely on uniform quality and long-term reliability. Ibodpfx Ajw Ahfyofijc Applications and compatibility The line suits facilities bottling still water in PET containers of multiple sizes. Importantly, its modular design enables quick format changes with minimal disruption. Because of this, companies can adapt to different production requirements. Notably, the system supports both small batches and high-volume output. Technical conclusion The used bottling line SIDEL for still water in PET bottles 25200 bph delivers a robust, efficient, and scalable bottling solution. Undoubtedly, SIDEL’s engineering ensures durability and optimal integration. For this reason, companies seeking a cost-effective way to expand production will find this line technically sound. Ultimately, it represents a valuable opportunity for those who need to scale operations without investing in new machinery.

Condition: used, Used Filling Line for CSD 12000 bph Ibsdpfx Aowcz Aljfisc Line configuration for isobaric filling of carbonated soft drinks The Used Filling Line for CSD 12000 bph fills PET bottles with carbonated soft drinks using isobaric technology. Since the isobaric process maintains pressure during filling, it preserves CO₂ saturation effectively. The system reaches a nominal output of 12,000 bottles per hour for 1.5-liter formats. Furthermore, it uses PCO 28 mm caps and operates on the Euro pallet packaging standard. Overall, the configuration is ideal for medium- to high-output CSD production. High-pressure air supply for the blowing process in the Used Filling Line for CSD 12000 bph  A high-pressure compressor, manufactured by SIAD (model MS3/1442-A3, year 2000), supplies compressed air to the blow molding machine. Specifically, it includes an air dryer and a 2000-liter air receiver to stabilize airflow. As a result, the compressor ensures consistent bottle formation. In addition, the unit supports continuous operation under high load, which is essential for large-scale PET blowing systems. Therefore, this component remains critical to upstream efficiency. Blow molding machine for PET preforms with mold cooling system The line includes a Sidel SBO 10 Series 2 blow molding machine (1999), which transforms PET preforms into bottles. Although molds are not included, the machine features a box tipper, a preform feeder, and a SOGEQUIP water cooling system for the molds. Consequently, the setup supports high-speed bottle production. Moreover, the system enables uninterrupted feeding toward the filling block, thereby minimizing downtime. Notably, the machine’s robust construction guarantees long-term reliability. Rinser–filler–capper block with 60 valves and isobaric technology SIDEL Alsim manufactured the central filler block in 2000. It integrates 60 rinsing heads, 60 isobaric filling valves, and a 10-head Alcoa capper. Thanks to this configuration, the system achieves high throughput while maintaining pressure consistency. In particular, the isobaric filler limits CO₂ loss and reduces foaming, which is crucial for CSD bottling. Additionally, it allows quick format changes, making the line adaptable to different production needs. Automated high-capacity mixing system in the Used Filling Line for CSD 12000 bph  The Moravek 240C mixer, installed in 2000, prepares and carbonates the beverage at a flow rate of 24,000 liters per hour. It combines syrup, treated water, and CO₂ in controlled ratios. Importantly, the mixer ensures product consistency before entering the filler. In turn, this reduces process variability. Similarly, its high capacity aligns perfectly with the filler’s speed, avoiding bottlenecks and enhancing line balance. Automated labeling and packaging system The post-filling section consists of a Krones Contiroll labeling machine (2004), which applies wrap-around OPP labels.

Condition: used, operating hours: 11,000 h, Used Bottling Line SIDEL for still water 14400 bph The Used Bottling Line SIDEL for still water 14400 bph delivers a complete solution for bottling still water in PET containers. The line handles 0.50-liter, 0.75-liter, and 1.5-liter bottles, offering flexibility for beverage producers. The Used Bottling Line SIDEL operates at a nominal capacity of 14,400 bottles per hour, making it ideal for medium to high-volume production environments. As a result, technical teams can integrate this system into existing plants or install it as a standalone unit to achieve consistent, high-throughput output. Iedpov U Ni Sjfx Afijbc Core Unit of the Used Bottling Line SIDEL: COMBIBLOCK SIDEL 8-40-8 In this Used Bottling Line SIDEL we find the COMBIBLOCK SIDEL 8-40-8, manufactured in 2006, performs blow molding, filling, and capping in a single integrated unit. First, the SBO 8 blow molder forms PET bottles from preforms using 8 cavities, supporting all three bottle formats. Next, the COMBI UNIVERSAL EUROPA WM filler uses 40 volumetric filling valves to deliver precise product dosing and minimize waste during production. Because the system uses volumetric filling, it provides consistent accuracy, especially for low-viscosity products such as still water. Then, the capping unit applies caps using 8 heads on bottles with 25 to 30 mm neck diameters. In addition, operators can perform quick format changes and maintain compatibility with industry-standard closures. Secondary Packaging: CERMEX Tray Packer in the Used Bottling Line SIDEL Following the filling and capping process, the CERMEX tray packer, installed in 2007, arranges and packs bottles in pre-defined tray configurations. It forms the following bundles: 1.5-liter bottles in a 2×3 configuration 0.75-liter bottles in a 4×3 configuration 0.50-liter bottles in a 4×3 configuration Consequently, the unit ensures consistent secondary packaging and supports downstream palletizing operations. Moreover, the machine maintains uniformity across batches and eliminates manual packing variability. Therefore, it significantly increases line efficiency. Compressed Air Supply: High and Low-Pressure Compressors The line includes two compressors that support the blow molding and cooling systems. Specifically, the SIAD TEMPO 2 high-pressure compressor delivers 1,500 m³/h and supplies compressed air to the SBO 8 blow molder. In contrast, the BAC F-100 low-pressure compressor, manufactured by Baltimore Aircoil in 2006, supports the evaporative cooling process. Together, these compressors maintain optimal conditions for both product quality and mechanical performance. Bottle Conveying System: SIDEL Conveyors The SIDEL conveyors, installed in 2006, transfer bottles between stations smoothly and efficiently. As a result, the conveyors synchronize movements across modules and prevent accumulation or blockages.