Used Compactor Plate for sale (13,848)

Condition: used, Year of construction: 1992, Technical details: sheet width: 4050 mm plate thickness: 16 mm Laedpfxsu Icpco Ab Uoh distance between columns: 4900 mm control for program: Robosoft SC5 Controller back gauge: 1000 motorisch cutting angle: 0,5° - 3° ° cutting gap adjustment: ja / jes mm down holder: 23 Stück height over floor: 1030 mm Table dimensions: L x B 4000 x 520 mm weight of the machine ca.: 19,2 t dimensions of machine: 5,2 x 2,2 x 2,78 m characteristics: - knife length 4100mm, 4 turns possible - Number of strokes: 5 - 11 strokes/min. - Table: side stop with linear scale, with stop bar 1000mm removable, feed aid via / with ball bearings - front support: LxWxH: 1600 x 1100 x 1000 mm; movable over roller rail, easy handling - backgauge adjustable, motor driven and foldable Operation via control panel with jib lenmgth arm and foot control Equipment: - light grid at backgauge - cut line ilumination Accessories: - 1 set (2 pieces) shearing blades *

Year of construction: 2022, condition: used, The panel swivel fix facilitates handling when moving panels from a vertical to a horizontal position. The support frame is hydraulically height-adjustable and also pivots. Support rollers facilitate horizontal movement. Four swivel casters ensure safe movement. Technical data: Support height: • Vertical approx. 340-120 mm • Horizontal approx. 1200-890 mm Max. panel size: 5200 x 2100 mm Load capacity: 250 kg Ledsv T Ilvspfx Ab Ueah Storage location: Bad Wimpfen

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction Lajdpfjxabkbsx Ab Ueh - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: used, Year of construction: 2008, total length: 4,500 mm, total width: 1,700 mm, total height: 1,200 mm, Empty weight: 7.000 kg Price: On request - Year: 2008 - Documentation available: No - CE marking present: Yes - Serial number: 20830013 - Max. sheet thickness: 16mm - Max. working width: 2000mm - Drive: raulisch - Number of rolls: 3 - Control: Teach-in - Motor power: 11.0kW - Transport dimensions: 4500mm x 1700mm x 1200mm (l x w x h) - Transport weight [kg]: 7000kg Financial information VAT: The price shown is exclusive of VAT Lajdpfx Ajxdigfsb Uoh VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, Darley hydraulic guillotine shear type GS 3116 working width 3050 mm max sheet thickness 16 mm Delem NC control type DAC 350 motorized backgauge automatic angle adjustment automatic cutting gap adjustment rear side equipped with transport conveyor Lajdpfx Abjxpuipo Ujh

Condition: used, Electro sinus magnetic chuck, sinus magnet, E-sinus magnetic clamping plate Length: 255 mm Width: 130 mm Height: 120 mm Voltage: 110 V DC (direct current) The magnet is tiltable up to 90° and features a sinus support plate. Net weight: 29 kg. Laodoxcimiepfx Ab Uoh

Condition: new, Year of construction: 2026, 3050 mm Lsdpfoxpi Dhox Ab Uoah 12,0 mm 0,5-3,0 ° 1000 mm table height 930 mm work height max. 930 mm

Condition: good (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder and a folding machine from the top manufacturer RAS from Sindelfingen. Machine features: - Cuts (see nameplate) up to 2.5 mm steel - Working length: just over 2 meters - Back gauge: 500 mm - Side/angle gauge - Extendable front support - Foot pedal - Reversible blade Lajdpfx Asxqpiyob Uoh - Weight approx. 1300 kg This machine comes from the insolvency of an aluminum parts manufacturer who primarily supplied the automotive industry — has been tested, cleaned, can be inspected and tested — warranty excluded. RAS Folding Bench: - Capacity: 2.5 mm steel, more for aluminum - Bending length: just over 2 m - Adjustable depth stop from the front, can also be used as an excellent sheet support - Hand and foot control - Machine comes from a reputable company and has been professionally checked before sale - Weight: see photo - Optional: a segmented rail (segment bar) from RAS is also in stock - Invoice with VAT shown separately - Shipping can be arranged upon request Free loading as shown in the pictures Inspection and testing are possible by telephone appointment — 0175 248 1975. Payment in cash upon collection — if there’s anything else I can do for you, please give me a call. Thank you. Collection should take place within 8 days after the end of the auction. Location: 97261 Güntersleben

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table Lsdpoxpfl Iofx Ab Usah -Clamping plate: on solid base frame -Clamping surface: 2400 x 2100 mm -Table height: 750 mm -Plate thickness: 130 mm -Transport dimensions: 2400/2100/H750 mm -Weight: 4900 kg

Condition: used, functionality: fully functional, 11 leveling feet Laodpfx Abexqmvdo Ueh Thread made of galvanized steel / thread size: M20 x 150 mm Total height including foot: 150 mm Max. load capacity: 100 kg, suitable for floor anchoring Base plate: PA polyamide plastic, glass fiber reinforced, black, threaded spindle: galvanized steel, incl. nut. Compensation for uneven floors without the need for complex concrete foundations.

Condition: good (used), sheet width 2540 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm 9.0 St. Laedpfxsxn Tx Hj Ab Ujh back stop - adjustable 100 mm/sek cutting angle 1° 20 table height 855 mm table depth 500 mm no. of strokes 33 - 55 Hub/min 0 max. 250 bar engine output 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 2960 x 1990 x 1700 mm From a maintenance workshop Good / well-maintained condition (!!) Equipment: - Powerful electro-hydraulic guillotine shear - AMADA NC control unit * Pivoting control panel, front left - NC electro-motorized material backgauge * Backlash-free ball screw - Manual cutting gap adjustment with 2 levers - 1x long side stop - 1x support arm - Rigid welded machine body - Sighting device with three mirrors (cutting according to marking) - Front safety guard (finger protection) - 1 freely movable foot switch - Operating instructions (PDF) * Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: good (used), functionality: fully functional, Asymmetric 3-roll bending machine Plate roll-flanging machine BOMBLED - Model: 317 S Year: 1971 Maximum rolling thickness: 4 mm Maximum working length: 2050 mm Maximum flanging thickness: 3 mm Lodpfx Abjxn Tgwj Ueah Roll diameter: 153 mm Control: motorized Motor: 3 kW / 4 HP Approximate weight: 2100 kg Dimensions: 3100x1100x1400 mm

Condition: new, Year of construction: 2025, sheet width 1360 mm plate thickness 06,0 mm table width 455 mm work height max. 880 mm cutting angle 1°30 ° Lajdpfx Abexpi Dbj Uoh rear stop 750 mm

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 16 mm, cutting length (max.): 6,000 mm, HYDRAULIC SHEAR LVD MVSB 62/16 Serial number 18478 Yom 06/1991 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 6200mm Distance between uprights 6400mm Gap 60mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.5° Min. number of strokes/min. 6 Max. number of strokes/min 25 Min. blade clearance 0.05 mm Max. blade clearance 1.6mm Motor power 30kW Lodpfx Absumhm Ae Ujah Approx weight 35000 Kg LxWxH 7100x2400x3000mm Accessories included; ELGO P85 “GO-TO” for back gauge Electrical adjustment of back gauge 1000mm 1 x Front support 2mtr, one with 90° square arm front support L2000mm Foot pedal Ball bearings on table Inclinable back gauge with manual hydraulic pump

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on a solid base frame -Clamping surface: 2100 x 1200 mm -Table height: 765 mm -Plate thickness: 120 mm Lasdpfxsxpfkqe Ab Ujh -Transport dimensions: 2100/1200/H765 mm -Weight: 2460 kg

Condition: good (used), Year of construction: 1991, machine/vehicle number: 120622, Offer 25305 Technical Data: Laedexqd H Topfx Ab Ujh - Max. working width: 2520 mm - Max. material thickness: 2.5 mm - Cutting angle: 2.2° - Strokes per minute up to: 25 1/min - Rear gauge with ELGO positioning control up to: 750 mm - Table height: 850 mm - Front angle stop: 2000 mm - Extendable front sheet support up to: 920 mm - 2 front support arms: 1000 mm each - Pneumatically assisted sheet holder, including front sheet chute - Electric foot switch - Inch/Single stroke selectable - Drive: 400 V / 3 kW - Space requirement approx. W 3450 x H 1150 x D 1700 mm - Weight approx.: 1600 kg

Condition: ready for operation (used), Year of construction: 1988, Immediately available ex-location: Hydraulic guillotine shear Fasti, type 509 25/6, year of manufacture 1988. Cutting length 2550 mm, material thickness 6 mm, electric backgauge 750 mm, drive 7.5 kW, weight 4 t. Price: EUR 5,500 plus VAT ex-location. Ljdpfxsxqbnns Ab Ujah

Condition: good (used), functionality: fully functional, fuel type: gasoline, Wacker BVPN 50 vibratory plate in good condition, ready for immediate use. Ljdpfx Abjxp U Ewe Ujah Weight approx. 70 kg Plate size approx. 600 mm x 470 mm With original Wacker service documents Please do not send email inquiries. For any questions, we are happy to assist you by phone. Viewing and collection only possible by prior telephone arrangement. Subject to change, prior sale, and errors. We are a member of the German Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal!

Year of construction: 1984, condition: good (used), burnt hydraulic guillotine shear, make LVD, type MVN 25 / 4, year 1984 power 2500 x 4 mm with backgauge with documentation Other accessories: Laodpjihppxsfx Ab Ush - Conveyor table - Lifting table

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, sheet thickness steel (max.): 16 mm, cutting length (max.): 4,000 mm, HYDRAULIC SHEAR LVD MVSB 40/16 Serial number 24159 Yom 1997 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 4050 mm Distance between uprights 4250 mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.0 ° Min. number of strokes/min. 7 Max. number of strokes/min 26 Min. blade clearance 0.5 mm Max. blade clearance 1.6 mm Motor power 22 kW Approx weight 20500 Kg LxWxH 4800x2170x2750mm Accessories included; Electrical adjustment of back gauge 1000mm with Go-to controller blade clearance and cutting angle adjustable. Laedpfxeuipu Eo Ab Ush 1 x Front support 1500mm, one with 90° square arm front support 1 x Front support of 1500mm Foot pedal

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table Lajdpfx Asxpfimeb Ueh -Clamping plate: on a solid base frame, with vice -Clamping surface: 2000 x 1000 mm -Table height: 870 mm -Plate thickness: 120 mm -Vice: clamping jaws: 100 x 30 mm clamping width 160 mm -Transport dimensions: 2280/1000/H1020 mm -Weight: 1500 kg

Condition: ready for operation (used), Year of construction: 1978, Available immediately from location: LVD Hydraulic Guillotine Shear Type MVS 62/4 Year of manufacture 1978 Cutting length 6200 mm Material thickness 4.0 mm Lsdpfx Absxqbnhj Ujah Digital backgauge 750 mm Drive 12.5 kW Weight 7500 kg Price: €5,500 plus VAT, ex location

Condition: good (used), Year of construction: 1992, Used guillotine shear, Helmut Lotze, type 205.3000x16, built in 1992 Working width: 3040 mm Lsdpewaynbofx Ab Uoah Max. sheet thickness: 16 mm Column width: 3040 mm Thrust: 200 mm Stop width: 1000 mm Motor power: 45 kW Stroke rate: 22/min.

Year of construction: 1991, condition: ready for operation (used), Available immediately from location: Technoimpex hydraulic guillotine shear Type HS 5 / 2550 Lajdjxqbfmopfx Ab Uoh Year of manufacture 1991 Cutting length 2550 mm Material thickness 5 mm Digital backgauge 1000 mm Drive 5.5 kW Weight 4 tons Price: EUR 4,500 plus VAT, ex location

Condition: good (used), Year of construction: 1975, Manufacturer: Sagita – Beyeler License Model: 2550 × 10 (Sheet length × Cutting thickness) Cutting length: approx. 2520 mm (effective) Max. cutting thickness (steel): ~10 mm Backgauge: approx. 750 mm, motorized adjustment Blade gap adjustment: manually adjustable Space requirements: with table supports: 3,200 × 2,800 × 1,600 mm transport-ready: 3,200 × 2,150 × 1,600 mm Lsdpjw Ecwcjfx Ab Uoah Weight: approx. 6,300 kg