Used Compaction Equipment for sale (42,431)

Condition: good (used), axle configuration: 4x4, operating hours: 761 h, Shibaura SP1440 3-cylinder diesel engine 0.9-liter engine displacement 4x4 / four-wheel drive 9 forward / 3 reverse gears Rear PTO shaft at 540 rpm Compact and maneuverable Equipped with a cabin Japanese quality and reliable technology Hodpfx Ahszxh I Rogot Includes transport/ground scoop Includes towed spreader Heater €5750

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 5067, total width: 450 mm, total length: 500 mm, input voltage: 220 V, total height: 400 mm, cutting width (max.): 108 mm, number of blades: 2, table height: 600 mm, Equipment: CE marking, Hot & Cold Automatic Strip Cutting Machine It can cut elastic, webbing (up to ¼" thick), ribbons, belt loops, hook and loop fasteners, nylon cords, leather, safety belts, rubber, and vinyl. FEEDING SPEED – adjustable up to 13 inches per second. • CUTTING LENGTH – approximately 400 ft. • CUTTING WIDTH – 4 inches. • TOLERANCE – 0.05% of the total cut length. • QUANTITY – up to 99,999 pieces. • COUNTER – pre-set up to 99,999. • SAFETY – knife cover sensor – automatic stop when the roll ends. • AUTO – feed/reverse. Hsdezut Axjpfx Ahgjt

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Hsdpfx Ahszimbkoget Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Label dispensing module for print integration, print module 4L300 thermal transfer printer, belt conveyor, see photos for details. Hodpfx Ahezn N Nnsgst

Condition: used, functionality: fully functional, power: 34 kW (46.23 HP), gearing type: hydrostat, fuel type: diesel, empty load weight: 2,990 kg, maximum load weight: 700 kg, chain condition: 70 %, Year of construction: 2007, operating hours: 3,950 h, Equipment: all wheel drive, rubber tracks, standard shovel, We are offering a powerful, tracked compact loader from Bobcat, model T140 High Flow, for sale. This machine was imported from abroad and is in very good condition. It is immediately available and ready for delivery. Identification: 212/26 Technical specifications: Engine: Kubota diesel engine with 34.3 kW output Year of manufacture: 2007 Operating hours: 3968 Operating weight: 2.99 t Rated operating capacity: 0.635 t, tipping load: 1.8 t Attachments: 1x 1.7 m front bucket with Euro clamp Equipment features: Cab, suspended seat, joysticks, bucket float function, auxiliary hydraulic circuits on the boom for additional attachments, lighting, rubber track profile: 70% Hedpoy H Hkcsfx Ahgot Transport dimensions: Length without bucket: 2.7 m Width: 1.5 m Height: 1.97 m Weight: 2.99 t The price is plus VAT. By arrangement, loading and cost-effective transport to the destination can be organized.

Condition: good (used), Year of construction: 2014, 2x carton packaging machines, carton erectors, B&E Equipment / I-Pak – used: Price per unit, ex works: only €9,950 (net), with self-dismantling! Manufacturer: B&E Equipment / I-Pak Type: BA18H Year of manufacture: 2014 Serial numbers: 14/0558 and 14/0557 Each unit includes 1x Nordson ProBlue 4 hot melt adhesive applicator with 4-liter hot melt adhesive Weight: approx. 1,500 kg 400V, 8kW, 15A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg Hsdpfxjzbyn Ne Ahgst A video of the machine is available!

Condition: ready for operation (used), Year of construction: 2022, This 5s LEADERMAC Compact LMC-530C was manufactured in 2022. It features a working width of 15 – 300 mm and a working thickness of 10 – 150 mm, making it suitable for various woodworking applications. With multiple spindles and a Schneider 5.7” EASYSET touchscreen control, this machine offers advanced capabilities. Consider the opportunity to buy this LEADERMAC Compact LMC-530C wood planer. Contact us for further details. • Ref.: e/haaaa/dc • Working width: 15–300 mm • Working thickness: 10–150 mm Hsdezuhfhspfx Ahgjt • Minimum workpiece length: 800 mm • Minimum consecutive length: 300 mm • Infeed table: 2500 mm • Pneumatic left side pressure roller • Two-piece pressure shoe • Schneider 5.7" EASYSET touchscreen control • NC control axis 3 (left radial) • NC control axis 4 (top radial) • NC control for pressure beam height adjustment • Feed motor: 7.5 HP, feed speed 6–24 m/min • 1st spindle: 15 HP, Ø50 mm, 6,000 rpm • 2nd spindle: 10 HP, Ø50 mm, 6,000 rpm • 3rd spindle: 10 HP, Ø50 mm, 6,000 rpm • 4th spindle: 20 HP, Ø50 mm, 6,000 rpm • 5th spindle: 20 HP, Ø50 mm, 6,000 rpm Additional equipment • Additional table for multi-rip saw • Anti-kickback device for multi-rip saw

Condition: good (used), Year of construction: 2014, Cardboard packaging machine, carton erector, B&E Equipment / I-Pak – used: Hjdpfxezbynpe Ahgst Price ex works: only €9,950 (net), if disassembled by the buyer! Manufacturer: B&E Equipment / I-Pak Type: BA20-2 Year of manufacture: 2014 Serial number: 14/0559 Each unit comes with 1x Nordson ProBlue 4 hot melt adhesive applicator and 4 liters of hot melt adhesive. Weight: approx. 1,250 kg 400V, 7kW, 16A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: good (used), Year of construction: 2020, functionality: fully functional, Mono Omega Cookie Depositor - used - year of manufacture: 2020 - computer-controlled - 2 heads - cutting wire - complete set of working nozzles - for 40x60 trays Hedpfxey Ald Hs Ahget - good technical condition/machine checked and cleaned - collection from warehouse/shipping option available - price on request

Condition: used, Year of construction: 2018, REF: MM6441 Wenzhou Jiangbo Dairy Equipment Factory Co. Ltd (Chinese) 5000L stainless-steel tank with agitator. Manufacturer - Wenzhou Jiangbo Dairy Equipment Factory Co., Ltd. Model - DCG. Hsdpsza T Sljfx Ahget Date of manufacture - 2018. Speed - 36 r/min. Electrical requirements – 415 V / 50 hz / 3 phase.

Condition: good (used), Year of construction: 2011, operating hours: 1,547 h, load capacity: 1,250 kg, lifting height: 4,620 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, empty load weight: 2,600 kg, mileage: 1,547 km, Electric triplex forklift Brand: Still (Germany) Year of manufacture: 2011 Very compact and suitable for CONTAINER use Capacity: 1,250 kg Lifting height: 4,620 mm Overall height: 2,060 mm ONLY 1,547 operating hours Equipped with FREELIFT Equipped with SIDESHIFT Battery: 2019 With external charger Hsdpfx Aheywancsgst Automatic filling system

Condition: used, Year of construction: 2020, operating hours: 2,000 h, machine/vehicle number: LC665, Technical Specifications & Performance DataThis Tetra Pak A3/Compact Flex aseptic carton filling and capping line is configured for Prisma Edge packaging in the 250 ml format. It combines carton filling, cap application and Helix handling equipment for compact beverage production and industrial packaging operations. The available equipment is designed around the Tetra Pak filling platform and Cap30 DreamCap closure system.Manufacturer: Tetra PakFiller model: A3/Compact FlexMaximum production capacity: 9600 BPHPack format: 250 ml Prisma EdgeAvailable configuration: filler, Cap30 capper and Helix equipmentOperating hours: 2000Machine year: 2020Advanced Automation & Control SystemsThe equipment includes line control for coordinated operation of the available filling, closure application and handling sections. A controlled line architecture supports consistent product flow through the filling and capping process while allowing the individual modules to operate as an integrated packaging system. The listed configuration includes Filler, LC40, ACHX30 and Cap30 components.Production Line Integration CapabilitiesThis equipment is suitable for integration into an aseptic carton packaging line. The available filler, capper and Helix sections can be positioned with compatible upstream product preparation equipment and downstream carton conveying, accumulation, coding and secondary packaging machinery. Its Prisma Edge format configuration makes it relevant for beverage production applications requiring 250 ml carton packs.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3/Compact Flex2020Capping MachineTetra Pak Cap30 DreamCap2020Various EquipmentTetra Pak Helix2020Machine Condition & Maintenance HistoryThe line is reported as running, with 2000 operating hours. The stated availability is limited to the filler, capper and Helix equipment. This condition provides a practical basis for buyers planning a second hand aseptic packaging installation, line extension or replacement project within an existing industrial packaging environment.Operational Performance & VersatilityThe A3/Compact Flex platform is intended for high-output carton filling and closure application. The Cap30 DreamCap system is matched with the listed carton format, supporting a consistent filling-and-capping sequence for Prisma Edge packs. With a maximum stated output of 9600 BPH, the equipment can support structured beverage production where compact retail carton formats are required.Installation Requirements & Site PreparationInstallation should be planned as part of a complete aseptic carton packaging layout, with appropriate product supply, utility connections, hygienic process interfaces and downstream pack handling. Site preparation should allow access for operation, cleaning, maintenance and format-specific material handling. Compatible line controls and conveying should be assessed when integrating the available modules into a used bottling line or broader industrial packaging... Hjdszucgmspfx Ahgst

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 1,068 h, 2023 | Bobcat T770 | Used Compact Track Loader | 1,068 hours Location: Illinois, United States Delivery available to your destination. About this machine: 2023 Bobcat T770 compact track loader with cab, heat/AC, selectable joysticks, and automatic ride control. Equipped with 2-speed drive, high-flow hydraulics, hydraulic quick tach, and 18" staggered C-block tracks with roller suspension. Comes with a rear camera cab cam system and Bobcat extended warranty through 2028. Equipment includes: ✔ Cab with heat/AC ✔ Selectable joysticks ✔ Automatic ride control ✔ 2-speed drive, high-flow hydraulics ✔ Hydraulic quick tach ✔ 18" staggered C-block tracks with roller suspension ✔ 79" smooth edge bucket ✔ Severe duty door (standard duty door also included) ✔ Rear camera / cab cam system ✔ Bobcat extended warranty through 2028 Key specs: Engine: Bobcat M3-Series, 4-cylinder, net power 92 hp (68.6 kW), Tier 4 Operating weight: 4,770 kg Bucket capacity (heaped): 1.9 m³ Hjdpfx Ahezxh Ahjgst Hydraulic pump flow: 138.5 L/min Travel speed: 10.6 km/h Fuel tank: 165.8 L Net peak torque: 429 ft-lb (581.6 Nm) What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Pre-sale inspection ✔ Instant shipping rates and worldwide delivery ✔ Documentation support ✔ Secure transaction on every purchase

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 500 kg, temperature: 250 °C, heating capacity: 105 kW (142.76 HP), air demand: 7,000 m³/h, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, Equipment: lighting, Compact powder coating system (complete system) – booth, curing oven, conveying system & Gema technology Complete system for manual powder coating of parts up to 3,000 mm in length and 500 kg payload per carrier. First-class brand-name components (Gema, Siemens, Schneider Electric, Donaldson, Riello), including installation, commissioning and operator training. Overview & Concept For sale is a brand-new, manual powder coating complete system for workpieces up to 3.0 m in length. The system combines an efficient extraction coating booth, a powerful gas curing oven, and a flexible rail conveying system including steel structure (individual design/planning of a powder coating system possible upon request!). 1. Powder coating booth (double-sided manual coating) - External dimensions (L x W x H): 3,400 x 1,100 x 2,150 [mm] - Workpiece opening dimensions: 500 x 1,600 [mm] - Extraction & filter: 2x radial fans at 4,500 m³/h (ATEX version, 3 kW each); 2 filter units with a total of 6 antistatic Teflon filters (Donaldson, 325 x 660 [mm]) - Cleaning: Automatic/manual compressed air pulse cleaning (6 valves) - Safety/equipment: ATEX-compliant internal lighting, sound insulation in the fan area, control via Siemens/Schneider wall control cabinet Electrostatic powder coating technology (Gema) (other manufacturers can also be supplied upon request) - 2x hand guns: Gema OptiSelect Pro with PowerBoost® technology, ATEX-certified - 2x control units: Gema OptiStar 4.0 CG20 with DVC and PCC precision current control, 250 memory programs, app connectivity - 2x injectors: Gema OptiFlow IG07 with quick-release & non-stick cartridge Convection curing oven (chamber oven with double door) - Internal dimensions (L x W x H): 3,500 x 2,000 x 2,300 [mm] - Max. temperature / operating temperature: up to 250°C / 180 - 200°C - Heating: Indirect thermo block with Riello/Ecoflam burner (approx. 105 kW (90,000 kcal/h)) - Fuel: Natural gas or liquefied gas (LPG) (other energy supply e.g. electricity possible upon request) Hjdpfx Aezu Imrjhgot - Recirculation: 2 x 3,500 m³/h recirculation fans (plus automatic fan exhaust fan) - Insulation: 150mm rock wool insulation Manual conveying system including steel structure Load capacity: Max. 500 kg per carrier Equipment: 5 oven rails, 15 carriers (3m each), 3 transverse transfer trolleys Running trolleys: Equipped with high-temperature resistant bearings Scope of supply & services / Commercial points Included in the price: - Booth with extraction & filter unit - 2x Gema powder coating units - Curing oven including thermo block & burner - Conveying system including steel structure & trolleys - Installation, commissioning & operator training on site

Condition: new, functionality: fully functional, power: 377 kW (512.58 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! Hjdezvfk Djpfx Ahget *Installation and Operator Training FREE New Generation FULLSTAR Series Mobile Crushing, Screening and Washing Plants are the most preferred machines in recent years thanks to easy and cost free installation. The first crushing process is performed with Primery Jaw Crusher, we can design with secondary impact crusher or cone crusher for second crushing stage according to the requirements of our customers. Fullstar-60 plant has been projected for the first time in the world by Fabo and provides crushing, screening and as well as to wash 0-5 mm sand at the same time on a single chassis. Our FULLSTAR model operates in closed Crushing circuit system and allows user to obtain 4 different final fractions up to 300 T / S capacity. We are manufacturing Fullstar-90 and 110 models which has 3 functions at the same time by trailed-type 2 chassis with its own tires. FABO FULLSTAR-90 is a mobile type plant which perform crushing, washing and screening operations at the same time. This type of plant is very efficient as it is produced on a single chassis, which reduces both plant operation area and manufacture cost. TECHNICAL SPECIFICATIONS: - Model: Fullstar-90 - Production Capacity: 120-180 Tons Per Hour - 1st Crusher: Primary Jaw Crusher – 900x650mm - 2nd Crusher: Secondary Impact Crusher – Rotor Ø1250x1000 mm - Maximum Feeding Size: 600 mm - Vibrating Screen Size and Deck: 1st Chassis: 1700x4500 mm : 2nd Chassis: 1550x4000 mm(Grizzly) ¬- Screw Washer Size: 600x5000 mm (Twins Helix) - Total Motor Power: 377 Kw - Generator (optional): 450 kvA - Plant Dimensions: 1st Chassis: 18960 x 4070 x 4650mm : 2nd Chassis: 15500 x 4650 x 4400mm FULLSTAR-90 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(Bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Screw Sand Washer (Single Helix) • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, CORMAK DI325 – Compact Dry Ice Cleaning Machine The CORMAK DI325 is a compact and modern dry ice cleaning machine designed for effective removal of dirt from machinery, molds, tools, production components, and technical surfaces. It is an ideal solution for companies looking for an efficient, clean, and safe cleaning method without the use of chemicals, water, or abrasive materials. The main advantage of the DI325 is its compact design and high mobility, which clearly distinguish it from many larger and less convenient machines available on the market. This makes the machine suitable not only for production facilities, but also for servicing, maintenance, field work, and any application where convenient transportation and quick setup are important. The machine uses dry ice pellets with a diameter of 3.0–8.0 mm and allows precise adjustment of operating parameters to suit the type of surface being cleaned and the level of contamination. Adjustable operating pressure and dry ice feed rate enable effective cleaning of both delicate components and more demanding industrial surfaces. Key Advantages Compact design for easy transportation and use in different locations, high mobility and convenient operation, effective cleaning without chemicals or water, non-abrasive cleaning that does not damage the treated surface, adjustable operating pressure, adjustable dry ice feed rate, quick setup and preparation for operation, ideal for industrial, service, and technical applications. Applications The CORMAK DI325 is suitable for applications including: Hjdjzwfulepfx Ahgjt cleaning machinery and production equipment, removing dirt from molds, tools, and components, cleaning metal and technical components, service and maintenance work, cleaning surfaces without the need to dismantle multiple components, removing deposits, grease, process contamination, and production residues. Included Equipment You receive a brand-new CORMAK DI325 dry ice cleaning machine, ready for operation with dry ice pellets, equipped with: CORMAK DI325 machine, a set of nozzles in various shapes and sizes, accessories required for operation according to the selected configuration. Different nozzle shapes and sizes allow the working stream to be adapted to the type of component being cleaned and the specific working environment, increasing the machine's versatility in everyday use. Technical Specifications Technical specification Value Power < 550 W Power supply 230 V AC, 50 Hz Air consumption 0.8–3.0 m³/min Pneumatic supply pressure 0.4–1.0 MPa (4–10 bar, adjustable) Dry ice feed rate 0–0.75 kg/min (adjustable) Dry ice hopper capacity 5 kg Weight 55 kg Dry ice pellet size 3.0–8.0 mm Drive system Direct drive Machine dimensions (L × W × H) 580 × 420 × 650 mm

Condition: used, This listing is for Stratec Gemini 6280 Compact Microplate Processor The unit is in full working condition and ready for immediate use The Stratec Gemini 6280 is a fully automated microplate processor optimized for low to mid-throughput ELISA assays. It seamlessly integrates sample pipetting, incubation, washing, and photometric reading into a space-saving, walk-away platform. Equipped with barcode tracking and intuitive software, it ensures exceptional process safety and reproducible results for clinical and research laboratories Hjdpozavi Tofx Ahgot Transparency Report and Technical Audit: • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform full diagnostic assay validation • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original)

Condition: new, Year of construction: 2026, CORMAK DI329 – Compact Dry Ice Cleaning Machine The CORMAK DI329 is a compact and modern dry ice cleaning machine designed for effective removal of dirt from machinery, molds, tools, production components, and technical surfaces. It is an ideal solution for companies looking for an efficient, clean, and safe cleaning method without the use of chemicals, water, or abrasive materials. The main advantage of the DI329 is its compact design and high mobility, which clearly distinguish it from many larger and less convenient machines available on the market. This makes the machine suitable not only for production facilities, but also for servicing, maintenance, field work, and any application where convenient transportation and quick setup are important. The machine uses dry ice pellets with a diameter of 3.0–5.0 mm and allows precise adjustment of operating parameters to suit the type of surface being cleaned and the level of contamination. Adjustable operating pressure and dry ice feed rate enable effective cleaning of both delicate components and more demanding industrial surfaces. Key Advantages Compact design for easy transportation and use in different locations, high mobility and convenient operation, effective cleaning without chemicals or water, non-abrasive cleaning that does not damage the treated surface, adjustable operating pressure, adjustable dry ice feed rate, quick setup and preparation for operation, ideal for industrial, service, and technical applications. Applications The CORMAK DI329 is suitable for applications including: cleaning machinery and production equipment, removing dirt from molds, tools, and components, cleaning metal and technical components, service and maintenance work, cleaning surfaces without the need to dismantle multiple components, removing deposits, grease, process contamination, and production residues. Included Equipment You receive a brand-new CORMAK DI329 dry ice cleaning machine, ready for operation with dry ice pellets, equipped with: CORMAK DI329 machine, Hsdpfx Aezwfu Sohget a set of nozzles in various shapes and sizes, accessories required for operation according to the selected configuration. Different nozzle shapes and sizes allow the working stream to be adapted to the type of component being cleaned and the specific working environment, increasing the machine's versatility in everyday use. Technical Specifications Technical specification Value Power < 1100 W Power supply 230 V AC, 50 Hz Air consumption 1.0–3.0 m³/min Pneumatic supply pressure 0.4–1.0 MPa (4–10 bar, adjustable) Dry ice feed rate 0–3.2 kg/min (adjustable) Dry ice hopper capacity 7.5 kg Weight 65 kg Dry ice pellet size 3.0–5.0 mm Drive system Direct drive Machine dimensions (L × W × H) 670 × 460 × 900 mm

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: KB-20211022002, 3 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tanks, previously used as a brite tank but can be used as an FV. Technical Specification: Model - KBBFT1300A. Date of manufacture - 2021. Hedpfxewl H Nio Ahgst Capacity - 2000 litres. Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Condition: good (used), 1 x Mono doughnut fryer. model FG059-B02 Hedjy S Td Hopfx Ahgjt

Condition: new, Year of construction: 2026, functionality: fully functional, LUFT 700 COMPACT Screw Compressor with Refrigerated Air Dryer and 500 L Compressed Air Tank The LUFT 700 COMPACT screw compressor with an integrated refrigerated air dryer and a 500 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 700 COMPACT screw compressor with refrigerated air dryer Hodpfx Aorh E Erehgjt 500 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 700 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 5.5 kW motor and an impressive actual output of up to 690 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 700 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 690 l/min ✅ Motor power: 5.5 kW Technical Specifications Parameter Specification Motor power 5.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 690 l/min Output at 6 bar 650 l/min Output at 8 bar 650 l/min Output at 10 bar 630 l/min Outlet connection diameter (G) 3/4" Dimensions 1840 × 650 × 1675 mm Weight 370 kg

Condition: new, Year of construction: 2026, LUFT 700 VSD+PM COMPACT Screw Compressor with Refrigerated Air Dryer The LUFT 700 VSD+PM COMPACT screw compressor with an integrated refrigerated compressed air dryer combines state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 700 VSD+PM COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 5.5 kW motor and an impressive actual output of up to 690 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for sandblasting applications. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, large automotive workshops and manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 700 VSD+PM COMPACT oil-injected screw compressor with refrigerated air dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Hodpfjybvkasx Ahgjt Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 690 l/min ✅ Motor power: 5.5 kW Technical Specifications Parameter Specification Motor power 5.5 kW / 7.5 HP Voltage 400 V / 50 Hz Output at 0–6 bar Average 690 l/min Output at 6 bar 690 l/min Output at 8 bar 650 l/min Output at 10 bar 650 l/min Outlet connection diameter (G) 1/2" Dimensions 1350 × 600 × 850 mm Weight 200 kg

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, Our 400 Ton/Hour Capacity Stationary Crushing and Screening Plant consists of 40 m³ vibrating feed bunker, wobbler feeder, CLK-110 jaw crusher, impact crusher, tunnel systems, stock and return belts, stock bunkers, control cabinet and automation system. The products transferred to the feed bunker are separated from dirt and mud in the first stage of the double-stage wobbler feeder and bypassed by the bypass belt conveyor In the second stage of the wobbler feeder, the products that are suitable for the jaw crusher are sent to the stock area with the transfer belt. The jaw crusher, with a maximum feed of 800 mm, crushes the products and sends them to the fist vibrating screen. In the first vibrating screen, the products are separated in 0-40 mm, 40-90 mm sizes and sent to the stock area. Products above 90 mm size are transferred to the secondary crushing and screening unıt. The products transferred to the tunnel system are sent to the 12-13 S impact crusher. The products crushed in the impact crusher are separated in different sizes by vibrating screen and sent to the stock area. Hsdezvxlnepfx Ahgst The products stored in the stock area are transferred to the pan feeder by passing through the tunnel system according to the need. The vibrating pan feeder transfers the products to the stock bunkers with the transfer belt conveyor All equipment of the crushing &screening plant is controlled from 3 different automation panels.

Condition: new, functionality: fully functional, fuel type: hybrid, Year of construction: 2026, FABO Mobile cone crusher with post screen FTC300S Fabo mobile cone crushers are designed for durability and long service life due to the robust chasis and wear resistant components the improved design let the Wearing parts are easily accessible and replaceable. And also ensure that maintenance is carried out in complete safety. User friendly has always been the key. Simplifying the operation of a complex machine has been done in Fabo mobile cone crusher Control is by wireless remote control or by cable connection . Starting the mobile cone crusher is as simple as pressing the start button.The running parameters controlled by PLC program.and all electrıcal hardware and software can be controlled via to internet connection at anywhere in the world . The ftc 300S mobile cone crushers from the FTC 300S range are capable of high reduction ratios and excellent cubical shape at highly output rates. They are used in various applications such as aggregate crushing, mining and recycling. In addition, the machine's compactness, mobility and dust reduction system make it ideal for contractors or aggregate producers working in urban areas. Using Fabo cone crushers, these units are powerful crushers capable of crushing medium-hard to hard natural stone, including abrasive varieties. Hodpjzvp Uaofx Ahgst Ftc 300 hybrid mobile cone crushers equipped with single deck post screen to get desired exact size for final product and available in a range of sizes and features. They can be supplied as standard or customised according to customer needs

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), fuel type: diesel, color: red, empty load weight: 1,300 kg, brakes: other, driver cabin: other, gearing type: other, suspension: other, Year of construction: 2026, Equipment: low noise, TICAB TI-CAR 225 | Compact Wheel Loader for Agriculture, Municipal & Utility Works Previous price: €27,460 Hodpfx Ahox Uqplsgjt Special price: €22,460 The TICAB TI-CAR 225 is a versatile compact wheel loader designed for demanding work in agriculture, municipal services, construction, landscaping, and utility maintenance. Thanks to its compact design and articulated steering system, the TI-CAR 225 operates efficiently in narrow and confined spaces such as urban streets, sidewalks, farmyards, warehouses, and industrial facilities. Combining power, maneuverability, and efficiency, it serves as a reliable alternative to traditional skid steer loaders while offering lower fuel consumption and simplified operation. Key Advantages ✔ Multi-purpose compact loader for year-round operation ✔ Compatible with a wide range of attachments: Bucket Pallet forks Snow blade Sweeper Auger And other hydraulic tools ✔ High maneuverability with articulated frame design ✔ Compact dimensions for operation in tight and urban environments ✔ Low fuel consumption with high operational efficiency ✔ Easy and intuitive control system for operators of all experience levels ✔ Durable construction designed for heavy-duty daily use Ideal Applications • Landscaping and green area management • Snow removal and winter road maintenance • Agriculture and farming operations • Municipal maintenance and utility services • Material handling in warehouses and industrial sites • Construction and light earthmoving works • Yard, sidewalk, and urban infrastructure maintenance Built for Productivity and Versatility The TICAB TI-CAR 225 is engineered to maximize productivity in diverse working environments. Its compatibility with multiple attachments allows one machine to perform a wide range of tasks, reducing equipment costs and increasing operational efficiency for contractors and municipal fleets. Why Choose TICAB TI-CAR 225? • Compact size with professional-grade performance • High versatility with multiple attachment options • Fuel-efficient and cost-effective operation • Strong, durable design for long-term use • Perfect solution for urban and agricultural applications Request a Quote Today Contact us for pricing, delivery options, and full technical specifications. The TICAB TI-CAR 225 is available for fast production and worldwide shipping.